Академический Документы
Профессиональный Документы
Культура Документы
INK-JET PRINTER
CHANGES & SUPPLEMENTS
IN THE MANUAL:
INK JET PRINTER EBS-6000 USER'S MANUAL VERSION #2.2
VERSION: 000204#1.3
S1
S2
F1
F2
Elektronische Beschriftungs-Systeme
EBS GmbH
Alte Ziegelei 19-25, D-51588 Nmbrecht
++49(0)22 93/93 90
Fax ++49(0)22 93/93 93
www.EBS-INKJET.de
000204 #1.3
TABLE OF CONTENTS
NOTATION FORM ADOPTED IN THIS MANUAL.........................................................1
GENERAL INFORMATION.............................................................................................1
1.1.
2.2.2.
3.
3.1.
3.2.1.
3.2.2.
4.1.2.
4.2.2.
4.3.
4.4.3.
4.4.4.
4.5.
4.5.1.
5.1.
8.
Application..............................................................................................................................................2
Air supply system................................................................................................................................2
Starting the Printer.................................................................................................................................3
Switching the printer on.........................................................................................................................3
Regular mode of switching off............................................................................................................4
Emergency and service shut-down.....................................................................................................5
Internal panel......................................................................................................................................5
Operating the printer with control MENU.........................................................................................6
Print head status......................................................................................................................................9
Printing.............................................................................................................................................10
Servicing the print head....................................................................................................................10
Alarms, errors and signalling...............................................................................................................11
Clearing the alarm............................................................................................................................11
How to print the first simple text?........................................................................................................12
Technical Specifications.......................................................................................................................12
NOTE:
The Manufacturer reserves itself the right to introduce changes whose description may
not be found in this document.
The Manufacturer shall not be liable for damages resulting from improper operation of
the machine or from consequences of editorial or printing errors in the instructions.
General Information
As different (two-headed, pigment-ink) printer types have been introduced, whose design and styling
resemble or are based on the EBS-6000 printer, the printer nomenclature has also been changed. Now
EBS-6000 is the name of a series of industrial ink-jet printers for non-contact labelling of various
objects moving before it on a belt conveyor, for example.
EBS-6002 is the name of a two-headed non-pigment-ink printer while EBS-6002P is the name
of a two-headed pigment-ink printer.
_________________________________________________________________________ 1
1.1.
EBS
Application
EBS-6002
S1
500
S2
F1
F2
30
1
4m
400
202
40
151
Fig. 1.1.
_____________________________________________________________ 000204#1.3
3.
MAIN
POWER
SWITCH
S1
S2
F1
F2
Fig. 3.1.
3.1.
In this section Fig. 3.1.1 and Fig. 3.1.3 have been changed:
"ON" BUTTON
(GREEN)
S1
S2
F1
F2
Fig. 3.1.1.
000204#1.3 ________________________________________________________________
EBS
EXTERNAL PANEL
INTERNAL PANEL
+300V ERR.
CHK V.ER.
V7 ERR.
FILL.ERR.
SOLV.BAD
INK LACK
SOLV.LACK
AIR LACK
2 PH.ERR.
1 PH.ERR.
S1
S2
F1
F2
2 HV ON
2 READY
1 HV ON
1 READY
+VIS (SOLV)
-VIS (INK)
St1
Sb1
(OVER) St3
Sb3
READY LAMPS
Fig. 3.1.3.
S1
S2
F1
F2
Fig. 3.2.1.
_____________________________________________________________ 000204#1.3
S1
S2
F1
F2
Fig. 3.2.2.
LED1
2 HV ON
2 READY
1 HV ON
1 READY
+VIS (SOLV)
-VIS (INK)
St1
Sb1
(OVER) St3
Sb3
LED2
Fig. 4.1.2.3.
000204#1.3 ________________________________________________________________
EBS
In this section we have changed figures where the Printer Operation MENU structure is defined:
1 TEXT SERVICE
2 PARAMETERS SERVICE
MAIN MENU
3 PRINTING
4 SERVICE
5 AUX. COMMANDS
see the
following pages
TEXT SERVICE
PASSWORD
PARAMETERS SERVICE
1 TEXT EDITION
4 DELETE TEXT
5 CLEAR LIBRARY
5 CLEAR PARAM.LIBRARY
PASSWORD
6 READ LIBRARY
7 LINK PARAMETERS
8 CREATE/CHANGE PASS
9 ACTIVATE PASSWORD
_____________________________________________________________ 000204#1.3
PRINTING
0 ALL HEADS
1 HEAD NO 1
1 STOP PRINTING
2 HEAD NO 2
2 START PRINT
3 QUICK STOP
4 PRINTING PARAMETERS
Vert. direct.
Space
Text rpt.
Rpt.dist.
Speed divider
Direction
Height
Offset
Offset2
Counter delta
Row repetit.
Mode
Speed
Interleave
Mirror
Generator
Resol. dot/cm
Cnv spd m/min
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
UP
1
1
200
1
LEFT
LARGE
1
1
1
1
NORMAL
SLOW
YES
NO
GEN
12
50
000204#1.3 ________________________________________________________________
EBS
SERVICE
0 ALL HEADS
1 HEAD NO 1
1 SERVICE
2 HEAD NO 2
2 SUCK
3 V0 OFF
4 V0 ON
5 FAST OFF
6 INK ON
7 INK OFF
8 SOLVENT
9 SET GUTTER
A STROBOSCOPE
B HV VALUE
C CONVEYER MEASUREMENTS
D OTHERS
AUX. COMMANDS
1 OFF BUTTON CANCEL
2 DISPLAY ERRORS
PASSWORD
3 CLEAR ERRORS
4 READ ERRORS REPORT
5 SET TIME AND DATE
6 ACTIVITY TIME
7 LANGUAGE
8 UNLOCK PROTECTION
_____________________________________________________________ 000204#1.3
4.3.
In this section Fig. 2.3.4 and a description before it have been changed:
The print head runs properly when ink jet is properly broken into droplets, the droplets are
properly charged and the stream of redundant droplets falls into a gutter thereby ensuring that the
phase measurement signal is correct. Therefore vital performance parameters are permanently
measured within the print head. The parameters, composing the so called print-head status, are
displayed in the Printer Status window on the terminal display. The print-head status is updated
on an on-going basis and displayed in the form of a block of various characters, whose meaning
would be described further on.
For two-headed printers, the Printer Status window shows the full status of one head at a time
only. To choose which status to display, use the
The keys have the following meaning:
F1
F2
When you press the F1 key once, status for print head No. 1 will be displayed; when you
press it again, status for two print heads will be displayed.
When you press the F2 key once, status for print head No. 2 will be displayed; when you
press it again, status for two print heads will be displayed..
!
NOTE:
The PRINT ON/OFF and INK ON/OFF keys on the external panel perform their
functions for the print head (or the print heads), whose status is shown on the display.
Thus, in order to use the PRINT ON/OFF key to start printing with print head No.2,
you should first press the F2 key to get the status for print head No.2 displayed in
the Printer Status window and then start the printing with the PRINT ON/OFF key.
If either the F1 key or the F2 key have been press twice to get the status
displayed for two heads, and if the PRINT ON/OFF (INK ON/OFF) key is pressed,
then the head status will change to the opposite one. For example, if print head No.1
is in the print state (see further on) while print head No.2 is in the stop state, and the
PRINT ON/OFF key is pressed, print head No.1 will stop printing while head No.2
will start printing.
A sample print-head status is given below.
GRAPHIC DISPLAY
NO.2
JOINT
Fig. 4.3.
000204#1.3 ________________________________________________________________
EBS
4.4.3. Printing
In this section we have added a note on accessing the Print submenu for each head:
NOTE:
The PRINTING submenu shows on the terminal display after one or all required
print heads have been chosen.
Contents of the submenu vary with the number of print heads chosen - see section
4.2.2.
Operating the printer with control MENU.
The SERVICE submenu shows on the terminal display after one or all required
print heads have been chosen.
Contents of the submenu vary with the number of print heads chosen - see section
4.2.2.
Operating the printer with control MENU.
10 _____________________________________________________________ 000204#1.3
4.5.
LED1
LED4
LED2
LED3
V02
V12
V82
V92
POWER
V01
V11
V81
V91
AIR ON
V2A
ALARM
V2V
V3
V4
V5
V6
V7
S1
S2
F1
F2
Fig. 4.5.1.1.
000204#1.3 _______________________________________________________________
11
5.1.
EBS
S1
S2
F1
F2
Fig. 5.1.1.
8.
Technical Specifications
In this section some specifications have been changed to the following ones:
air consumption
14. Weight
AC 87242V 45440Hz,
DC 90350V;
< 40W - for standard version.
5 6.5 bar (0.5 0.65 MPa) - free from
dirt, dust, oil and water);
appr. 0.04 m3/min. (40 l/min.)
for an in-built vacuum pump.
appr. 21 kg.
15. Dimensions:
height
width
depth
500mm,
400mm,
202mm.
12 _____________________________________________________________ 000204#1.3