Академический Документы
Профессиональный Документы
Культура Документы
constructive solutions
1 Colpor 200
Advantages
3 Bitucell
4 Recessed seal
Resilient
1 Thioflex 600
Specification
Page 1
Bitucell
Estimating
Properties
Form
Solids content
Recovery
Weathering test
Extrusion
Distortion
Brittleness
:
:
:
:
:
:
:
Supply
Compressible sheet
100%
> 85% (ASTM D1751)
No disintegration (DTp CI 1015)
< 1.2 mm (ASTM D1751)
< 0.7 mm (ASTM D944)
Does not crack or shatter (ASTM
D944)
Bitucell
Nominal sheet Thickness
:
:
1.22 m x 2.20 m
12 mm 19 mm 25 mm
Storage
Precautions
Slabs
Joint sealing
A joint sealing slot can be formed by placing a removable
timber former on top of the Bitucell. Alternatively, Bitucell
can be installed to the full depth of the slab and cut back to
the required depth subsequently using a power brush
machine. This latter method is generally used for slabs
which cannot be cleaned and sealed until all building
construction has finished. Bitucell should be tamped down
to ensure that it fills the joint completely and provides
continuous support for the joint sealant.
Technical support
Fosroc offers a comprehensive technical support service to
specifiers, end users and contractors. It is also able to offer
on-site technical assistance, an AutoCAD facility and
dedicated specification assistance in locations all over the
world.
Important note:
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions
for the Supply of Goods and Services, copies of which may be obtained on request. Whilst Fosroc endeavours to ensure that
any advice, recommendation, specification of information it may give is accurate and correct, it cannot, because it has no direct
or continuous control over where or how its products are applied, accept any liability either directly or indirectly arising from the
use of its products, whether or not in accordance with any advice, specification, recommendation of information given by it.
www.fosroc.com
email: fosam@fosroc.com
Regional Offices
Jeddah Sales Office
Jeddah Showroom
Riyadh
Dammam
Khamis Mushayt
Registered Office: Industrial Area, Phase 4, Road No. 414, Street No. 407
Page 2
FO SA/Bitucell/05/A