Академический Документы
Профессиональный Документы
Культура Документы
Living
Outside
Play
Technology
Workshop
Table of Contents
Table Top Touchscreen MAME Arcade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
File Downloads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
Author:ChromationSystems
www.chromationsystems.com
Designing electronic creations from microcontrollers, LEDs and anything else I can pull out of a dumpster and make use of. Check my Profile
Image Notes
1. There are 9 QuickKey Buttons
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
File Downloads
ChromationSystems-Arcade-Cabinet-Decals.zip (1 MB)
[NOTE: When saving, if you see .tmp as the file ext, rename it to 'ChromationSystems-Arcade-Cabinet-Decals.zip']
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
- Where the 2x4s are traced out, measure 2 evenly spaced holes for each 2x4.
- Using a 3/16" drill bit, drill out the holes. all 8 of them
- Unclamp the side panels.
- Pick what panel is on each side and mark them.
- Lay a panel down flat with its outside side facing up.
- Using a countersink bit, countersink all 8 of the holes, test fit a screw to find out what depth they should be.
- Repeat with the other side panel.
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
Image Notes
1. Had to fix a mistake
Image Notes
1. Both sides clamped together for filing and sanding so they are exactly the same
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
Bottom Panel: To help it stay rigid and square now is a good time to mount the bottom panel.
- I wanted a bit of space between the bottom panel and the bottom of the cabinent so I measured up 1.5" from the bottom and drew a line on each side panel.
- Take your 21" x 18" MDF and apply a bead of glue all the way around its edges that will contact the side panels.
- Using the line, fit the panel into the bottom, make sure it it even.
- Slide the it back so there is a gap in the front of the cab for the speakers.
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
Image Notes
1. Bottom Marquee
2. Top Panel
3. Bottom Front Panel
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
Image Notes
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
1. Bottom Marquee
2. Top Panel
3. Bottom Front Panel
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
Space Invaders
Blue Border Lines
Blue rectangle at 45 deg.
Silver Stars
White Clouds
Purple Rectangle
The MAME Logo in chrome already applied to its border color, purple.
Space ship and laser shots, go on top the blue border to add some depth.
If you are using a printed decal, ask your printer for tips on applying it.
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
Blocks: I didn't want to screw the control panel in or anything, its a good access point to the PC and the speakers, so I glued on some blocks. So the panel can easily lift
off and on.
- Place the button panel in place on the cabinent.
- From the bottom mark the sides and front with a pencil
- Cut some MDF blocks, I used 1.5" x ~6 and the other side was 1.5" x 4", a joystick was in the way so it had to shorter.
- Use the pencil marks and glue the blocks into place
- Let it dry a bit so it gets tacky but can still slide.
- Place the button panel back in place carefully.
- From the bottom slide the blocks into the corners and let dry.
- The control panel can be removed, a little bit of glue might have stuck to the cabinet.
- After some other adjustments it didn't fit as tight as it had, so some electircal tape was applied to the blocks and that made it real tight again. No wiggling while playing.
Once its dry, the button panel can be lifted out and won't slide around when it is in its place.
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
Image Notes
1. Test Leads are connected to a current limited votage source, used them for
testing the LEDs to ensure the colors were correct. The blackone is connected to
the 5v Rail
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
Image Notes
1. Blue square was added
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
- I mounted the Amp on the keyboard tray to make the knob easy to get to, all the way in back, couple of screws holding it down.
- Trim the speaker wires to length and connect the wires to the speakers.
Image Notes
1. Standoffs
Image Notes
1. String supports!
Image Notes
1. Monitor and PSU
2. Goes to AC
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
Image Notes
1. Ground Wires are soldered in
Image Notes
1. Hot glue the QuickKey PCB to the bezel
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
Image Notes
1. There are 9 QuickKey Buttons
Image Notes
1. Push in to close, push in to open magnetic latch
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
Image Notes
1. Metal plate for the magnetic latch, couldn't screw it, used liquid nails
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
Image Notes
1. There are 9 QuickKey Buttons
Related Instructables
MAME
Cabinet in 4 key
steps by
chrismake
Arcade MAME
Unit Part1 by
jaws3497
Nes Arcade
Cabinet by
cbeatty1
MAME arcade
cabinet start up
(Request
instructions if
you like:) )
(Photos) by pacman
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/
Another Arcade
Machine by
bluebean
Advertisements
Comments
6 comments
Add Comment
JerryBoi831 says:
ChromationSystems says:
MrPapaya says:
ChromationSystems says:
Tomcat94 says:
This is great! 4.5 stars, plus, I've added this to the "Arcade Machines" guide.
mikeasaurus says:
Awesome build, thanks for sharing!
http://www.instructables.com/id/Table-Top-Touchscreen-MAME-Arcade/