Академический Документы
Профессиональный Документы
Культура Документы
Hydropave
Hydropave is a permeable paving system designed by Tobermore Concrete. The system allows
water to permeate through the joints of the paving brick and be absorbed into the sub-base where
it is retained before being slowly released into the drainage system. Hydropave is available in both
machine laid and manual laying version. Consult Tobermore Concrete Products technical literature
for details.
Hydropave 240
Hydropave 240 is the original permeable concrete block paving from Tobermore. This larger block
size increases the speed of installation.
60mm and 80mm thick blocks are made to BS EN 1338:2003
Manufacturer: Tobermore Concrete Products Ltd, 2 Lisnamuck Road, Tobermore, County L'Derry
BT45 5QF. Tel: 028 7964 2411, Fax: 028 7964 4145. Email: sales@tobermore.co.uk Web:
www.tobermore.co.uk
Product reference: Hydropave 240
Size: 240 x 120 x 80mm
Colour: Natural / Bracken / Brindle / Heather / Charcoal
Finish: Standard
Design/Aggregates: Please go to the bottom of this document for details
Hydropave 240 ML
This is the Machine Lay version of Hydropave 240. Hydropave 240 ML is the original permeable
concrete block paving from Tobermore. This larger block size increases the speed of installation. It
is designed specifically for machine lay installations and comes pre-packed in a herringbone
configuration.
60mm and 80mm thick blocks are made to BS EN 1338:2003
Manufacturer: Tobermore Concrete Products Ltd, 2 Lisnamuck Road, Tobermore, County L'Derry
BT45 5QF. Tel: 028 7964 2411, Fax: 028 7964 4145. Email: sales@tobermore.co.uk Web:
www.tobermore.co.uk
Product reference: Hydropave 240 ML
Size: 240 x 120 x 80mm
Colour: Natural / Bracken / Brindle / Heather / Charcoal
Finish: Standard
Design/Aggregates: Please go to the bottom of this document for details
Manufacturer: Tobermore Concrete Products Ltd, 2 Lisnamuck Road, Tobermore, County L'Derry
BT45 5QF. Tel: 028 7964 2411, Fax: 028 7964 4145. Email: sales@tobermore.co.uk Web:
www.tobermore.co.uk
Product reference: Hydropave Sienna Duo
Size: 208 x 173 x 60mm & 173 x173 x 60mm
Colour: Silver / Graphite / Sandstone
Finish: Textured
Design/Aggregates: Please go to the bottom of this document for details
Manufacturer: Tobermore Concrete Products Ltd, 2 Lisnamuck Road, Tobermore, County L'Derry
BT45 5QF. Tel: 028 7964 2411, Fax: 028 7964 4145. Email: sales@tobermore.co.uk Web:
www.tobermore.co.uk
Product reference: Hydropave Tegula 240
Size: 240 x 120 x 80mm
Colour: Natural / Bracken / Cedar / Heather / Charcoal / Slate
Finish: Rumbled
Design/Aggregates: Please go to the bottom of this document for details
Manufacturer: Tobermore Concrete Products Ltd, 2 Lisnamuck Road, Tobermore, County L'Derry
BT45 5QF. Tel: 028 7964 2411, Fax: 028 7964 4145. Email: sales@tobermore.co.uk Web:
www.tobermore.co.uk
Manufacturer: Tobermore Concrete Products Ltd, 2 Lisnamuck Road, Tobermore, County L'Derry
BT45 5QF. Tel: 028 7964 2411, Fax: 028 7964 4145. Email: sales@tobermore.co.uk Web:
www.tobermore.co.uk
Product reference: Hydropave Tegula 200 ML
Size: 200 x 100 x 80mm
Colour: Natural / Bracken / Cedar / Heather / Charcoal / Slate
Finish: Rumbled
Design/Aggregates: Please go to the bottom of this document for details
Manufacturer: Tobermore Concrete Products Ltd, 2 Lisnamuck Road, Tobermore, County L'Derry
BT45 5QF. Tel: 028 7964 2411, Fax: 028 7964 4145. Email: sales@tobermore.co.uk Web:
www.tobermore.co.uk
Product reference: Hydropave Tegula Duo
Size: 208 x 173 x 60mm & 173 x173 x 60mm
Colour: Natural / Bracken / Cedar / Heather / Charcoal / Slate
Finish: Rumbled
Design/Aggregates: Please go to the bottom of this document for details
Sub-base aggregates
A clean 4/20mm coarse graded aggregate to BS EN13242:2002 must be used for this component.
A crushed rock angular stone works best.
Jointing aggregates
The blocks are jointed using a 6.3-2mm grit to BS EN13242:2002
Installation
Paving should be installed to BS7533-3:2005. All joints must be filled to the top with 6.3-2mm grit.
Joints which are not fully filled can lead to possible movement of the blocks after use. Tobermore
recommends that after a few weeks of use, any joints which have settled and are not full, are
topped up with grit. Joints should be kept filled at all times. You need approximately 1 ton of grit for
every 100m2 of 80mm paving. Care should be taken that the permeable joints do not become
contaminated as work on the scheme continues. Special care must be taken when soft
landscaping is carried out so that soil does not enter the joints.
Tobermore offer full technical support from their sales offices visit www.tobermore.co.uk for more
details. Samples can also be delivered on request.