Академический Документы
Профессиональный Документы
Культура Документы
Hot Rolled
Product Name:
Thickness (mm)
5-55
Width (mm)
1,500 max
Length (mm)
7,000 max
1. PRODUCT DETAILS
Our Wear Resistant Plates are wear resistant hardened boron steel plate. This is
intended for applications where demands are imposed on abrasion resistance. The
excellent mechanic properties of boron steels are achieved through heat treatment.
Hardened boron steel is extremely resistant to abrasive wear and high surface
pressure. It also offers good weld ability with cold bending properties.
2. PRODUCT APPLICATION
Crusher, sieves, feeders, rneasuring pockets, skips, cutting edges, conveyors,
buckets. knives, gears, sprockets, dump-trucks, loaders, Industrial trucks, lorries,
bulldozers, excavators, slurry pipe systems, screw conveyors, presses etc.
4. MANUFACTURE:
Plate shall be made by Hot Rolling process and then Heat Treated.
5. HEAT TREATMENT:
It has obtained its mechanical properties by quenching and when necessary by
means of subsequent tempering. The properties of delivery condition cannot be
retained after exposure to service or preheating temperature in excess of 250 C.
The normal instruction for the welding or high strength steels also apply to this steel
and best result is obtained with low hydrogen welding consumable methods.
The products made of this steel are suitable for cold bending provided. That
consideration is given to the high hardness. The formability of steel decreases with
increasing hardness. This has to be kept in mind when forming.
SS WEAR RESISTANT
PLATES
No. 1, The Rubicon, 51 Norman Road, Greenwich , London, SE10 9QB, United Kingdom
Registered in England Reg No. 05679130 - VAT Registration No. 888 1026 03
Page 1 of 2
6. CHEMICAL COMPOSITION:
The steel shall conform to the following requirements:
GRADE
HB 340
HB 340
HB 400
HB 400
HB 500
HB 500
Thick
ness
mm
5-32
33-63
5-32
33-63
5-32
33-63
%C
%Si
%Mn
%P & S
%Cr
%Ni
%Mo
max
max
max max
max max max
0.20
0.7
1.6
0.025 1.0 0.25 0.25
0.20
0.7
1.6
0.025 1.0 0.25 0.25
0.22
0.7
1.6
0.025 1.0 0.25 0.25
0.22
0.7
1.6
0.025 1.5 0.50 0.50
0.29
0.7
1.6
0.025 1.0 0.50 0.30
0.29
0.7
1.6
0.025 1.5 1.00 0.60
%B
%V
%Ti
%Al
max
0.005
0.005
0.005
0.005
0.005
0.005
max
0.08
0.08
0.08
0.08
0.08
0.08
7. TOLERANCES ON DIMENSIONS:
Thickness EN10029 ClassA
Width and Lenght
EN10029
Flatness Class N: Steel type H
8. SURFACE PROPERTIES:
According to EN10163-2 Class A
Repairs condition Subclass1 (Repair Welding is allowed)
9. HARDNESS:
Grade
HB340
HB400
HB500
Hardness
300-360
360-430
450-540
SS WEAR RESISTANT
PLATES
No. 1, The Rubicon, 51 Norman Road, Greenwich , London, SE10 9QB, United Kingdom
Registered in England Reg No. 05679130 - VAT Registration No. 888 1026 03
Page 2 of 2
CE