Академический Документы
Профессиональный Документы
Культура Документы
IN QUALITY, RELIABILITY
& LONG OPERATIONAL
LIFE
Low elongation
Excellent handling characteristics - reduced
maintenance
Wide range of top quality covers designed
to meet the toughest demands including
abrasion, cutting, fire, cold, oil & grease
Tensile strengths ranging from 500 N/mm
up to 5400 N/mm
Available in widths from 500 mm up to
1600 mm
Custom-made specifications available on
request
ST0713E
www.dunlopconveyorbelting.com
steelcord belting
STEELCORD BELTING
Technical INFORMATION
the dunlop steelcord range
All specifications shown are according to EN ISO 15236 part 2 and DIN 22131
Type
Minimum
cover
thickness
(mm)
ST500
ST630
ST800
ST1000
ST1250
ST1400
ST1600
ST1800
ST2000
ST2250
ST2500
ST2800
ST3150
ST3500
ST4000
ST4500
ST5000
4
4
4
4
4
4
4
4
4
4
5
5
6
6
7
7
8
Cord
diameter
Cord pitch
(mm)
(mm)
(kg/m2)
14.0
11.0
12.0
12.0
14.0
14.0
15.0
13.5
12.0
11.0
15.0
13.5
15.0
15.0
15.0
16.0
17.0
4.9
5.4
7.5
7.7
9.8
10.0
11.8
12.4
13.3
13.8
17.1
18.1
20.9
23.3
25.3
28.3
30.2
2.7
2.7
3.5
3.6
4.4
4.5
5.2
5.2
5.2
5.2
6.7
6.7
7.6
8.2
8.6
9.4
10.2
Carcass
weight
Tail and
tension
Snub and
bend
500
500
630
630
630
630
800
800
800
800
1000
1000
1250
1250
1250
1400
1600
400
400
500
500
500
500
630
630
630
630
800
800
1000
1000
1000
1250
1400
315
315
400
400
400
400
500
500
500
500
630
630
800
800
800
1000
1250
Minimum
belt width*
(mm)
400
400
400
400
500
500
500
500
650
650
650
800
800
800
800
1000
1000
Other carcass constructions and belt strengths are available upon request.
EXPLANATION
To calculate the thickness of the belt, please add the total thickness of the covers to the cord diameter. To determine the belt-weight per square
meter (excluding fire resistant belts for which other weights apply): multiply the sum of the covers by 1.15 and add the result to the carcass weight.
* The load support of a belt is a factor of the belt width, belt strength and bulk material density. The table indicates the minimum belt width
required for good troughability based on three idlers of the same length set at 30.
A WIDE RANGE OF COVER QUALITIES
All Dunlop cover qualities are anti-static according to EN ISO 284, REACH (Registration, Evaluation and Authorisation of Chemical substances)
regulation EC 1907/2006 compliant and ozone resistant as per EN/ISO 1431.
Dunlop cover quality
DIN
quality
EN/ISO
quality
Permissable temperature C
Min.
ambient
Cont.
Material
Peak
Material
-30
-40
-30
80
80
100
90
80
90
Base
polymer
SBR
NR
Technical features
Application area
High abrasion resistance for normal service conditions.
Excellent resistance to cuts, impact, abrasion and gouging resulting from large lump sizes of heavy,
sharp materials falling from heights.
Possesses all of the qualities of the RE cover grade plus extra wear resistance to meet the demands of
conveying highly abrasive materials.
RA
RE
Y
X
D
H
RS
Heat
resistant
Betahete
Deltahete
T
T
-20
-20
160
200
180
400
SBR
EPDM
ROS
-20
80
120
NBR
Oil and fat resistant for products containing minerals oils and greases.
Abrasion
resistant
NR/SBR
The minimum (min) temperatures specified in this document refer to the ambient temperature of the surrounding area. The continuous (cont) and masimum temperatures
relate to the material that is to be transported on a conveyor belt. For low ambient temperatures please ask for information regarding our Coldstar range.
Other cover grade qualities for special applications are available upon request.
All data and recommendations in this leaflet have been supplied to the best of our knowledge, as accurately as possible and updated to reflect the most recent technological developments. Some
products may have been changed or rendered obsolete in the light of more recent technological developments. We cannot accept any responsibility for recommendations based solely on this document.
Dunlop Conveyor Belting (Head Office) Oliemolenstraat 2, PO box 14 9200 AA Drachten The Netherlands Telephone: +31 512 585 555 Fax: +31 512 524 599
Spain Telephone: +34 9 377 04 597 France Telephone: +33 1 30 55 39 03 POLAND Telephone: +48 32 218 5070 Russia Telephone: +7 495 780 88 64
Italy Telephone: +39 363 906 266 germany Telephone: +49 2821 973 405 MOROCCO Telephone: +212 522 34 65 80/85
GHANA Telephone: +233 302 799 011 the united arab emirates Telephone: +971 4 880 6236
www.dunlopconveyorbelting.com