Академический Документы
Профессиональный Документы
Культура Документы
SECTION INCLUDES
PERFORMANCE REQUIREMENTS
SUBMITTALS
QUALITY ASSURANCE
KEO/12-5829-0000
Mall of Qatar
Doha, Qatar
26 0529/1
PART 2 - PRODUCTS
2.01
APPROVED MANUFACTURERS:
26 0529/2
5.
6.
7.
2.03
Through Bolts: Structural type, hex head, and high strength. Comply with
ASTM A 325.
Toggle Bolts: All-steel springhead type.
Hanger Rods: Threaded steel.
APPLICATION
A. Comply with NECA 1 and NECA 101 for application of hangers and supports for
electrical equipment and systems except if requirements in this Section are stricter.
B. Maximum Support Spacing and Minimum Hanger Rod Size for Raceway: Space
supports shall be as required by the BS 7671 Requirements for Electrical Installations
or stated in NFPA.
C. Multiple Raceways or Cables: Install trapeze-type supports fabricated with steel slotted
or other support system, sized so capacity can be increased by at least 25 percent in
future without exceeding specified design load limits.
D. Spring-steel clamps designed for supporting single conduits without bolts may be used
for 38-mm and smaller raceways serving branch circuits and communication systems
above suspended ceilings and for fastening raceways to trapeze supports.
END OF SECTION
KEO/12-5829-0000
Mall of Qatar
Doha, Qatar
26 0529/3