Вы находитесь на странице: 1из 9

PDMS COMMANDS

PIPING COMMANDS.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
44.
45.
46.

ADD ALL PIP


REM ALL PIP
MOVE U THROU IDP@
MOVE E THROU IDP@
MOVE W THROU IDP@
MOVE N THROU IDP@
MOVE S THROU IDP@
Q DTXR (To See Name Of Component)
Q STEXT (naming For Attachment)
Q ATT
REPR INSU ON/OFF UPDATE
CONN NEXT (Connection to next element)
FCONN (For force connection)
DIST 500
AXES AT PH (To see Axes of Pipe Head)
AXES AT PT (To see Axes of Pipe Head)
AXES OFF
BY U 500
BY D 500
BY E 500
BY W 500
BY S 500
BY N 500
Q NAME
ROTATE BY 45 (Rotated command)
ROT BY 90 ABOUT Z THRO ID@ (Rotated)
NEW BOX COPY PRE ROT BY 90 ABOUT Z THRO IDP@
Q PARA (To check nozzle size)
Q CATREF (To See nozzle Rating)
Q POS IN WORLD
CH CE (check current element) for piping.
Q SPREF (check piping Spec)
Q ORI (To see the orientation)
DIR D (Direction Down) U E W N S (For elbow, tee, valve)
Q P1/P2/P3 (To see pipe Bore Direction Connection type and Position)
Q HBORE
Q TBORE
Q LBORE
NEW BRA COPY PREV BY E/W/S/N/U/D 100
Q U (To see the elevation)
Q ANGLE (For change the angle)
THRO NEXT (To connect element to next component)
Q LTLE (To cheek pipe length)
Q MEM
Q RTEX OF DETREF (To see element type and detail)
CONN IDP@ TO IDP Q CE

47.
48.
49.
50.
51.
52.
53.
54.
55.

Q PL (For Direction and position)


BRA CONN PH TO FIST MEM
BRA CONN PT TO NOZZ ID@
BRA CONN PT TO LAST
RAD 500 (Control Valve Radius)
HEI 500 (Control Valve Height)
BACK (Backward)
FORW (Forward)
FOR DRAIN PIPE

a.
b.
c.
d.
e.

ADD ATT (For isometric note)


Q ATT
TCONNECT OPEN
Q STEXT
STEXT 'DRAIN POINT'

1. FOR SLOPE LINE /ROTATED ELBOW


a.

FORWARDS (Select in piping components)

b. DIR TOW NEXT


c. BACKWARDS (Select in piping components)
d. DIR TOW NEXT
1. MTOC OFF (Not want in isometric bill of material)
2. MTOC ON (Want in isometric bill of material)

STRUCTURE COMMANDS.
1. AXES AT POSE/S (end or start)
2. Q POSE WRT/*
3. EXTE END BY D 500 WRT/*
4. EXTE START BY U 500 WRT/*
5. EXTE END/START THRO ID@
6. EXTE END/START THRO IDPL@ (PL-Pline)
7.

Q CUTL (To see length of section)

8. Q POS PPLINE BOS IN/* (bos tos na )


9. ADD ALL STR
10. REM ALL STR
11. Q ATT
12. BY U//D/E/W/N/S 500
13. Q DRNS DRNE
14. DRNSTART S 45 E (Direction and angle)
15. DRNEND S 45 W (Direction and angle)

EQUIPMENT COMMANDS.
1.
2.
3.
4.
5.
6.
7.
8.

9.
10.
11.

ADD ALL EQUI


REM ALL EQUI
MOVE U THROU IDP@
MOVE E THROU IDP@
MOVE W THROU IDP@
MOVE N THROU IDP@
MOVE S THROU IDP@
Q ATT
REPR HOLES ON/OFF UPDATE
REPR OBST ON/OFF UPDATE
To Copy New Equipment
a.

b.
1.
2.
3.
4.
5.
6.

VAR1 NAME
NEW EQU COPY $V1 (To Include Equipment in another zone)

BY U//D/E/W/N/S 500
NEW BOX COPY PRE
NEW BOX XLEN 400 YLEN 250 ZLN 150
NEW CYL COPY PRE
NEW PYRE COPY PRE
NEW NOZZ COPY PRE

OTHERS COMMAND.
1. For copy equip/sub equipment from one project to another project
a. FILE /FILE NAME.TXT
b.

OUTPUT CE

c. TERM
1. For pest equipment / sub equipment from one project to another project)
a.
3.

$M FILE NAME.TXT

EXPLANT
a. repre level 6
b. repre level 6
c. repre level pipe 6
d. repre level stru 6
e. repre level nozz 6
f. EXPORT SYSTEM /explant
g. Export file /c:\export10 (file name)
ADD SITE
a. export/ civil side colour 13
b. export/ equi side colour 15
c. export/ stru side colour 16

d. export finish

1. For Undo Command


a. MDB NOUPDATE
b.

EXIT

1. Mdb Update
a. MDB UPDATE
b. USER PROMQAMQA/MQA
c. /SUFN
d.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.

EXIT

UNCLAIM CE
UNCLAIM ALL
ALPHA REQ CLEAR (To clear the command screen)
CREATE NEW ZONE/SITE/EQUI
ADD ALL WITHIN VOL CE 100
Q ORI (To see the orientation)
ALPHA LOG /C:/ANANT.TXT (To make command line file)
SAVEWORK
Q US (User name)
Q MDB (Multiple data base)
Q REF
RECREATE DISPLAY /ABC.TXT (For save Display)
$M ABC.TXT (For restore Display)

1) ORI AND P3 IS TO IDP@

2) ORI P3 IS TO IDP@

3) DIR AND P3 IS U, D, N, E, W, S

Piping
ADD ALL PIPE WITHIN VOL CE 500
ADD ALL PANEL WITHIN VOL CE 300
ADD ALL WITHIN VOL CE 400
CONN
Q DTXR
AXES AT PT
AXES AT PH
ADD ALL PIPE WITH
MATCHWILD(NAME,'*577037*') COL2
Q MATREF
Q DESP
Q MTXX
Q PATOP
Q PA BOP
Q HDIR
Q TDIR
ADD HREF
ADD TREF
ADD HREF TREF
HPOSI ENU. WRT /*
VAR 1 NAME
VAR 2 WORPOS
AIS TEXT '$V1' AT $V2
new bend copy prev conn dir u
q att (select bend)
Q DDNM
AT CREF
ADD CREF
CONNECT BWD

If you put it at Branch level, all pipe elements around the branch will be displayed.
If you put it at Branch level, all panel elements around the branch will be displayed.
If you put it at Branch level, all elements around the branch will be displayed.
Current element will get connected.
To know the Tail point
To know the Head point

To query the Material Specification


To query the Design Parameter of the Equipment
To query the Material of the component
To query the Top of the Pipe co-ordinates
To query the Bottom of the Pipe co-ordinates
To query the Head direction
To query the Tail direction
TO ADD PIPE ATTACHED TO HEAD OF CURRENT BRANCH
TO ADD PIPE ATTACHED TO TAIL
To add PIPE attached to both HEAD and TAIL of current branch
To change the position of head WRT to WORLD
To mark the component name
For copying a existing bend to new bend
Edit the radius and bend angle
Keep it at CREF
Add Connected Reference item
To connect backward

Q ANGL
NEW ELBO CHOOSE
DIR TO NEXT
FLIP
BACK
THRO CREF
THRO ID@
THRO NEXT
CREF ID@
CHOOS ALL
NEW TEE CHOOS ALL
GOTO CATREF
Q TUCL
Q MTCL
INCLUDE ID BRANCH @
PREC OUT DI 4 DEC
FCONN
Q TPOS
Q HPOS
STATUS
$Q
Q DTXR
Q MTXX
DRAG MOVE S DIST 1000
DRAG AT E 3000
DRAG MOVE E 3000
ORI AND P3 IS TO IDP@
Q BRWEI
NEW TEE CHOOS ALL
Q SPREF
Q DESP

To find the angle of the component


To create a new elbow
To move the component in the direction of next componenet
To rotate w.r.t its own axis
To change the direction from Forward to Backward
Place it at CREF
Place it at the place, where it has been selected by Mouse click
Place it at the next component
Be at the place, click the item to be included as CREF
All the available types of that particular components will be listed
New Tee can be created from the list of all types of Tee for that spec.
Go to Catalogue Reference
To find out the length of Branch
To find out the length of Branch
To move a branch from one line to another line
To get 4 Decimal precision on Co-ordinate values.
Forced connection
Query Tail Position
Query Head Posion
Will give us the list of DBs and and the access rights for the User & Module
To Query the list of commands available
To get detailed description of a component
To get material of construction of a piping element
The current element and the constrained network are moved south bythespecified distance.
The current element and the constrained network will be dragged to the specified position.
The current element and the constrained network will be moved to the specified position.
TO ORIENTATE THE LEAVE POINT OF TEE TO THE REQUIRED DESIGN ELEMENT
To get the weight of the selected component
New Tee can be created from the list of all types of Tee for that spec.
Specification Reference
Query the Design Parameter

CH CE
Q SPEC OF BRAN
Q SPEC OF SPREF
Q HBORE
Q TBORE
Q DXTR
Q ISPEC (ex: ISPEC ADD or ISPEC
REMOVE)
Q PSPE

To check the Data Inconsistency


Query the Specification of Piping branch
Query the Specification reference of Piping branch
Query the head bore details of the branch component
Query the tail bore details of the branch component
Query the description of the component
Query the requirement of the Insulation
Query the Piping Specification

FOR NOZZLE ORIENTATION


NOZZLE ORRIENTION TEXT
Btext '#NAME(P2:)(C2:);#SPRE(P2:)(C6:11)#SPRE(P2:)(C12:)'
Btext '#NAME(P2:)(C2:)'
Btext '#EQUI(C2:)#/#POS'
Pltxt '~C OF FIXED#/SADDLE'
Pltxt '~C OF SLIDING#/SADDLE'
Pltxt 'BOTTOM OF BASE PLATE#/EL.#P6POSU(C2:)'
Pltxt 'PLTF.EL.#DIMPOSU(C2:)'
Pltxt 'B.TL.'
Btext '#<LIFTING TRUNIONS #>#/2Nos.180~0 APPART.'
Btext '#<~C EL.#POSU(C2:)'
Btext '#NAME(P2:)(C2:)-#SPRE(P2:)(C19:)' (FOR MANHOLE)
Pltxt 'BOTTOM OF BASE PLATE#/EL.#DIMPOSU(C2:)'
PLTXT 'N(0~0)'
$SKK = Llpen 11 $/NEXT $/KK
Lframe FALSE
GBOX 0
#P1BOR(C1:2) x #P2BOR(C1:2)#/ECC.RED.
#<#PIPE(C2:)#>
BOP.EL.#PLBOPU(C2:)
PLTXT '#PIPE(C2:)#/BOP.EL.#PLBOPU(C2:)'
Btext #<#P1BOR(C1:)-#PIPE(C2:14)-#PSPE<FROM PIPE>(C2:7)#>#/BOP. EL.#PABOPU(C2:)
LINE NO. WITH LEADER & BOP

FOR

Btext #P1BOR(C1:)-#PIPE(C2:14)-#PSPE<FROM PIPE>(C2:7)#>#/BOP. EL.#PABOPU(C2:) FOR LINE


NO. WITHOUT LEADER & BOP
Btext #NAME(C12:)#SPREF(P2:)(C13:) FOR NOZZEL NO. & SIZE
Btext '#DSCO<FROM PIPE>#>#/BOP. EL.#PABOPU(C2:)' FOR INCH YOU HAVE GIVE PIPE NAME
Btext '#<#P1BOR(C1:2) x #P2BOR(C1:2)#>#/CON.RED' THIS IS FOR REDUCER
Btext '#P5POSN<wrt site>' this is for chaning wrt to site coordinet
Title'VENT STACK AREA#>#/RABAR RGMS' THIS IS FOR TITLE EDIT
Btext '#<FGL.EL#P3POSU+' THIS IS FOR FGL,TOG EL.+
NEW GLAB COPY PRE DDNA ID SUBS@ THIS IS FOR PIPE SUPPORT
Btext #NAME(C2:9)
Btext '#NAME(C12:)-#SPREF(P2:)(C13:)' THIS FOR EQP. NOZZEL NAME

Btext #>#>#/SPACE FOR#>#/#EQUI(C2:)


Btext '#<VALVE PIT#/#>#YLEN x #XLEN' THIS FOR NAME PIT SIZES
Btext #SPRE(C2:7) FOR SPEC
Btext #PSPEC(C2:)#>#/(TYP) FOR SPEC. TYP.
Btext #DSCO<FROM PIPE>#>#/GRE FLOWLINE FROM#>#/SAK-P9(A3P) for extra text
Btext #<#DSCO<FROM PIPE>#>#/BOP. EL.#PABOPU(C2:) for line no. inches
Btext '#< #SPRE(C2:7)#>#/ (TYP)' FOR SPEC. TYP
Pltxt '#DSCO<FROM PIPE>#>#/BOP. EL.#PABOPU(C2:)'
Pltxt #P1POSE<WRT SITE> (PUT P4 FROM EAST, P5 FROM NORTH, P1 TO EAST AND P2 TO
NORTH COORDINATE)

Вам также может понравиться