Академический Документы
Профессиональный Документы
Культура Документы
R05
Set No. 2
[16]
2. Discuss in detail the various categories of light fittings employed for indoor lighting,
describing the application of each type.
[16]
3. (a) Describe direct and indirect core type furnace with neat sketches.
(b) A low frequency induction furnace whose secondary voltage is maintained
constant at 10volts, takes 400 kw at 0.6 pf, when the hearth is full. Assuming
the resistance of the secondary circuit to vary inversely as the height of the
charge and reactance to remain constant, find height up to which the hearth
should be filled to obtain maximum heat.
[8+8]
4. Discuss the characteristic features of a traction motor for effective traction systems.
[16]
5. Write short notes on the following:
(a) Resistance welding
(b) Arc welding
(c) Welding transformer characteristics
(d) Advantages of coated electrodes in welding process.
[4+4+4+4]
6. With the help of Speed-Time curve, Define and explain the importance following
factors in a traction system:
(a) Notching period
(b) Accelerating period
(c) Free running period
(d) Coasting period
(e) Braking period.
[16]
R05
Set No. 2
[8+8]
R05
Set No. 4
[8+8]
4. A machine shop 30m 15m is to have an illumination of 150 lux on working plane.
The lamps are mounted 5m above the working plane. Give the layout of a suitable
installation:
(a) Using filament lamp
(b) Using 80watt fluorescent lamps. Assume suitable data?
[16]
[4+4+4+4]
R05
Set No. 4
[16]
?????
R05
Set No. 1
[16]
2. (a) Derive the relation between the temperature of a motor at a particular time
during operation and final temperature.
(b) What do you understand by load equalization?
[8+8]
[4+4+4+4]
R05
Set No. 1
[16]
8. (a) Describe direct and indirect core type furnace with neat sketches.
(b) A low frequency induction furnace whose secondary voltage is maintained
constant at 10volts, takes 400 kw at 0.6 pf, when the hearth is full. Assuming
the resistance of the secondary circuit to vary inversely as the height of the
charge and reactance to remain constant, find height up to which the hearth
should be filled to obtain maximum heat.
[8+8]
?????
R05
Set No. 3
[16]
3. (a) Describe direct and indirect core type furnace with neat sketches.
(b) A low frequency induction furnace whose secondary voltage is maintained
constant at 10volts, takes 400 kw at 0.6 pf, when the hearth is full. Assuming
the resistance of the secondary circuit to vary inversely as the height of the
charge and reactance to remain constant, find height up to which the hearth
should be filled to obtain maximum heat.
[8+8]
4. Write short notes on the following:
(a) Resistance welding
(b) Arc welding
(c) Welding transformer characteristics
(d) Advantages of coated electrodes in welding process.
[4+4+4+4]
5. (a) Derive the relation between the temperature of a motor at a particular time
during operation and final temperature.
(b) What do you understand by load equalization?
[8+8]
R05
Set No. 3
7. A machine shop 30m 15m is to have an illumination of 150 lux on working plane.
The lamps are mounted 5m above the working plane. Give the layout of a suitable
installation:
(a) Using filament lamp
(b) Using 80watt fluorescent lamps. Assume suitable data?
[16]
8. Discuss the characteristic features of a traction motor for effective traction systems.
[16]
?????