Академический Документы
Профессиональный Документы
Культура Документы
http://www.duxcw.com/digest/Howto/software/windows/winme/install/inst-print.html
1 of 9
6/17/2010 6:29 PM
http://www.duxcw.com/digest/Howto/software/windows/winme/install/inst-print.html
Installing Directly from the CD. No can do. The various versions of the Windows
Me CDs are not bootable like Windows 98 and Windows 98 Second Edition.
Copying cab files and Installing from a Hard Disk. Unless there are severe
problems in prior installation attempts, there is no need to copy the Windows cab
files (cabinet or compressed files containing the Windows files) from the CD to the
hard disk and installing from the hard disk (which is done just like it is for
Windows 98). Unlike Windows 98 and 98 SE and like Windows 95 OSR2, the
Windows Me Setup copies the cab files to the hard disk drive (C:\windows\options
\install) and installs Windows from there. Windows will no longer be asking for the
Windows CD when you are on the road with your laptop while the CD remains
behind in a desk drawer in your office (most annoying).
Before Installing (Upgrades and Clean Installs)... Back-up your critical data.
This is advisable for upgrades as well as clean installs. I use Microsoft Backup to
back-up critical data to a file server or another computer on a network or to a
second drive connected to the computer as a slave. One could also use a Zip,
tape, or CD-RW drive as a backup device with this software. My critical data
consists of: C:\My Documents, C:\Windows\Cookies, C:\Windows\Favorites,
C:\Windows\lbyard.pwl (password file), and few other directories and files specific
to me. Of course, you will have to reinstall all of applications if you do a clean
install and restore your critical data.
If you are installing a new hard disk, your old hard disk becomes a backup. Be
sure it is not connected to the new drive when partitioning, formatting or installing
Windows on it.
I always try to have two backups before cleaning a drive. I have seen backup
programs fail to make a good backup (especially if tape is used), old disk drives
dropped, data on old disk drives wiped-out by human error, and still other disk
drives that decided to die at the very moment they were evicted from their beloved
homes.
Try to obtain the latest drivers for the motherboard and and expansion boards in
your computer.
2 of 9
6/17/2010 6:29 PM
http://www.duxcw.com/digest/Howto/software/windows/winme/install/inst-print.html
Flash the motherboard with the latest BIOS, if you feel competent to do so, and test
the flash with you existing version of Windows.
If you are installing Windows Me on a newly constructed computer, I recommend
installing Windows after the video board is installed and before the rest of the
expansion boards are installed.
< Contents | Next >
Before Installing as an Upgrade...
Run a virus scan.
Uninstall the anti-virus program.
Remove any programs which prevent access to the boot track on the hard
disk, such as Norton Bootlock.
Go into the computer's CMOS setup and disable any setting which warn if the
boot track is about to be changed.
Be sure you have your Internet info (account, password, DNS settings, etc.)
Run (Start, Run) msconfig and turn-off any unnecessary start-up programs,
etc. (turn them back on after the upgrade, if you desire).
Double-check your drive for any important data which you may have
overlooked when you did the backups.
Install as an Upgrade. Installing the Win Me upgrade on top of an existing
Windows 9x installation is almost identical to installing the Windows 98/98 SE
upgrade:
Boot to your existing version of Windows.
Insert the Win Me Upgrade or Full version CD into the CD-ROM drive.
Wait for the CD-ROM drive to come-up to speed and autostart.
3 of 9
6/17/2010 6:29 PM
http://www.duxcw.com/digest/Howto/software/windows/winme/install/inst-print.html
If you are prompted with a message asking if you want to upgrade, simply
click Yes. (There is no Install option on the Start-up Window if it appears).
If not, Click Start, Run, and enter setup.
Follow the Setup instructions and choose Save the system files and make the
Startup floppy when prompted. This version of Windows does not force you
to make the Startup floppy as Win 98 and 98 SE did. So, if you have a shop
and plenty of Startup floppies you do not have run Setup from the DOS
prompt with the /ie flag to avoid having to dig out a blank floppy and waiting
for Setup to make the Startup floppy (that was most annoying).
You can also run setup from the DOS prompt with a Startup disk if you can't get
your existing Windows to boot-up after an aborted install, etc...
D:\win9x\>setup.exe (where D: is your CD-ROM letter).
Clean Install. I experimented with a couple of other hard disk drives and found that
installing the Full Retail Version of ME on a bare hard disk drive was altogether a
different matter than the using it as an upgrade, and quite crude for a retail
package. Instructions for doing it are on the ME CD ROM at D:\win9x\cleanhd.txt,
where D: is your CD-ROM drive. They start-out with the following:
"IMPORTANT: All the steps you need for preparing a hard disk and
installing Windows Me are included here. However, if you are an
inexperienced user, it is not recommended that you install the hard disk
and prepare it for use yourself. If you are not familiar with the related
technical issues, it is recommended that you contact a computer
hardware service organization to do this."
The instructions are lengthy. Basically, they say you have to partition and format
the drive before running setup. If you read all of the cleanhd.txt and follow it
carefully, you should succeed in accomplishing the install. If, however, you skip
over them, rely on past Windows experience, and read the label on the floppy that
comes with ME you may have problems as I did. The label says...
If you don't have a previous operating system on your computer:
4 of 9
6/17/2010 6:29 PM
http://www.duxcw.com/digest/Howto/software/windows/winme/install/inst-print.html
6/17/2010 6:29 PM
http://www.duxcw.com/digest/Howto/software/windows/winme/install/inst-print.html
6 of 9
6/17/2010 6:29 PM
http://www.duxcw.com/digest/Howto/software/windows/winme/install/inst-print.html
6/17/2010 6:29 PM
http://www.duxcw.com/digest/Howto/software/windows/winme/install/inst-print.html
metal" with delete partition functions. This will, of course, destroy all
data on the drive (or make it very difficult to recover). Do it at your own
risk. to be sure the boot record is rather pristine you may want to restore
it to the way it was when it came from the manufacture with C:\>fdisk
/mbr (where mbr = manufacturer's boot record).
Format the partitions. After creating the partitions and making sure the primary
DOS partition is active, and rebooting to the floppy, an experienced tech might
assume that the Windows Setup would format the drive. Not so. That has to be
done manually. And, by the way, It cannot be done from "4. Minimal boot."
Issuing the Format C: command there results in the following error message:
Invalid media type reading Drive C:
Menu choices "1. Help" and "2. Start with CD-ROM support" do allow formatting
drive C: without error.
So, reboot the computer to the floppy.
Select "2. Start Computer with CD-ROM support," and format the C: drive as
follows:
A:\> format c:
Do not use the /s (transfer system files) flag with the format command.
Win ME does not support it (by the way, Full Versions of Windows 98/SE
will not install if it is done). Also, the SYS command results in an error
message.
Get a cup of coffee...
Repeat for the D: drive, etc. Get two cups of coffee.
Run Setup. After formatting all of the partitions, change drives to your CD-ROM
drive and execute Setup from the DOS as follows:
A:\>E:
8 of 9
6/17/2010 6:29 PM
http://www.duxcw.com/digest/Howto/software/windows/winme/install/inst-print.html
9 of 9
6/17/2010 6:29 PM