Академический Документы
Профессиональный Документы
Культура Документы
S -125
TM
Specifications
A
E
B
G
MODEL
MEASUREMENTS
Working height maximum*
Platform height maximum
Horizontal reach maximum
Below ground reach
A Platform length
B Platform width
C Height - stowed
D Length - stowed
Length - transport (jib tucked under)
E Width - axles retracted
Width - axles extended
F Wheelbase
G Ground clearance - centre
STM-125
Metric
US
40.15m
38.15m
24.38m
3.27m
0.91m
2.44m
3.07m
14.25m
12.17m
2.49m
3.35m
3.66m
0.44m
131ft 2in
125ft 2in
80ft
10ft 9in
3ft
8ft
10ft 1in
46ft 9in
39ft 11in
8ft 2in
11ft
12ft
1ft 5.5in
PRODUCTIVITY
Lift capacity
Platform rotation
Vertical jib rotation
Turntable rotation
Turntable tailswing - axle retracted
Turntable tailswing - axle extended
Drive speed - stowed
Drive speed - raised/extended
below 80ft
Drive speed - raised/extended
above 80ft
Gradeability - stowed**
Turning radius - axle retracted: inside
outside
Turning radius - axle extended: inside
outside
Controls
Tyres - RT lug - Foam filled
227kg
160
135
360 continuous
1.68m
1.24m
4.8km/h
1.1km/h
500lbs
160
135
5ft 6in
4ft 1in
3.0mph
0.68mph
0.55km/h
0.34mph
40%
40%
4.01m
13ft 2in
6.75m
22ft 2in
2.59m
8ft 6in
5.74m
18ft 10in
12V DC proportionall
445/65 D22.5
POWER
Power source
Auxiliary power unit
Hydraulic tank capacity
Fuel tank capacity
WEIGHT***
20,739kg
STANDARDS COMPLIANCE
www.genieindustries.com.au
45,721lbs
*T
he metric equivalent of working height adds 2m to platform height.
U.S. adds 6ft to platform height.
** G
radeability applies to driving on slopes. See operators manual for
details regarding slope ratings.
*** W
eight will vary depending on options and/or country standards.
S -125
TM
Features
STANDARD FEATURES
MEASUREMENTS
PRODUCTIVITY
S-125
40.15m (131ft 2in) working height
24.38m (80ft) horizontal reach
227kg (500lbs) lift capacity
PRODUCTIVITY
2.44m (8ft) steel platform
1.52m (5ft) jib boom with 135
working range
4WD
4WS
Extendable axles
Rough terrain foam-filled tyres
Self-leveling platform
Hydraulic platform rotation
Fully proportional Hall effect
joystick controls
Hydraulic oil cooler
Drive enable
Horn
Hour meter
Tilt alarm
Descent alarm
Motion alarm
360 continuous turntable rotation
Locking turntable covers
Positive traction drive
Two speed wheel motors
Configurable controls to limit
maximum height to 24.38m (80ft)
or 30.48m (100ft)
Ground control box cover
Engine status display
Thumb rocker steer
Dual flashing beacons
POWER options
240V power to platform
7 kVA hydraulic generator (240V/50Hz)
Cold Weather Packages
Diesel scrubber/spark arrestor muffler
Retained key selector switch
POWER
Sydney
74 Glendenning Road
Glendenning NSW 2761
Melbourne
374 Hammond Road
Dandenong VIC 3175
Distributed by:
Effective Date: April 2012. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operators
Manual for instructions on the proper use of this equipment. Failure to follow the Operators Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to
our equipment is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks, or trade names of
Terex Corporation, Terex South Dakota, Inc., and/or their subsidiaries in the USA and other countries. All rights reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. Genie is a registered
trademark of Terex South Dakota, Inc. in the USA and many other countries. 2009 Terex Corporation.
www.genieindustries.com.au