Академический Документы
Профессиональный Документы
Культура Документы
Introduction
An inventory is any stock of economic resources that is stored for future use. If a
commodity is ordered frequently, then the costs of ordering are high. On the other hand,
ordering more units less frequently saves on ordering costs but increases the expense of
keeping a larger inventory.
Thus the management problem in this case is: How frequently should materials be
ordered?
The purpose of inventory
The following are the major reasons for maintaining an inventory:1. Protection against fluctuating demand: Inventories are kept to meet peak demand.
E.g. blood is stored in hospitals in quantities sufficient to meet the needs of a accident
2. Protection against delayed supply A strike by the suppliers employees is one
reason why deliveries may not arrive in time. Lack of materials at the supplier level,
strikes in the transportation network are other possible causes for shortages.
Inventories are kept as a buffer that can be used until late deliveries arrive.
3. Benefits of large quantities purchasing large quantities of an item often entitles the
buyer to a price discount. Similarity in the case of manufacturing large production
lots, the utilization of more efficient (automated) equipment can be justified by the
reduction in the per unit manufacturing cost.
4. Primary basis for business Retail operations involving customer examination and
selection require fully stocked shelves and complete inventory.
5. Savings on ordering costs ordering in large quantities reduces the number of times
that an order must be placed and processed. Since a fixed cost is associated with
placing each order, the fewer times one places an order, the lower the total cost of
ordering will be.
1
6. Other reasons Inventories are kept for several other reasons. An inventory may
improve the bargaining power of a firm with a supplier (or with its own employees)
by making the company less vulnerable to delays or stoppages.
Inventory is also kept so that machines can be shut down for overhauls.
An inventory of labor is maintained to meet fluctuating production demands in order
to reduce hiring, firing and training costs.
The importance of Inventory Management
Proper inventory management may be one of the most important functions of
management. Excess inventories are costly to store but insufficient inventories may result
in loss of market share or idle employees.
The task of inventory control is a part of a management function called materials
management, which is concerned with the acquisition, distribution, storage, and disposal
of materials and parts in organizations.
The structure of the inventory system
We consider inventory models that pertain only to an individual item in stock. This
means, for example, that with an inventory system of three different items, the model
must be applied three times.
An inventory system involves a cyclical process that is assumed to run on several periods
and whose major characteristics are described next.
Inventory level An item is stocked in a ware-house, store or any other storage area.
This stock constitutes an inventory. The size of the inventory is called inventory level or
the inventory on hand.
Demand and depletion The inventory is depleted as demand occurs. Assume that one
starts with an inventory of 100 units. As time passes, the inventory level declines due to
the demand for the item in stock. The rate of demand determines the depletion rate and
the inventory level.
The higher the rate of demand, the quicker the inventory is reduced. The rate of demand
can be constant e.g. 5 units a day or it may fluctuate (e.g. three units on the first day and
seven on the second). A constant demand reduces the inventory level in equal steps. The
steps of constant demand can be approximated by a straight line. A fluctuating or
variable demand is shown by unequal steps and can be approximated by a curve.
Re-ordering To re-build an inventory, the item is replenished periodically. When the
inventory level is reduced to a certain level called the re-order point, a replenishment
order is placed. The time between reordering and receiving the shipment is called the
lead time.
Replenishment, shortages and surpluses In some basic inventory models, it is
assumed that the re-ordering is scheduled so that the replenishment will arrive exactly
when the inventory level reaches zero.
However, if the demand fluctuates and/or the lead time varies, the shipment may arrive
either before or after the stock is completely depleted i.e. the depletion and replenishment
do not coincide. In such a case, a surplus or a shortage will occur.
If the shipment arrives after depletion, then the demand cannot be met and a shortage or
stock out will occur.
When the shipment arrives prior to depletion, an inventory level larger than zero or a
surplus exists. Shortages can be eliminated or reduced by establishing a buffer or safety
stock.
The Average Inventory for purposes of inventory decision making as well as other
managerial uses such as insurance and taxation, the concept of an average inventory is
used. Assume that during a 5-day period the inventory levels are as follows.
M
T
16
12
Then the average inventory is
W
8
T
4
F
0
16 12 8 4 0
8 units
5
If the demand is constant, the average inventory can be computed by adding the
inventory at the beginning of the cycle (16) to the inventory at the end of the cycle (0) (in
this case) and dividing it by 2.
If the inventory at the end of the cycle is zero (as in this example), the average inventory
Cost of capital The interest paid on the capital invested in inventories or the
opportunity cost of doing something else with the money.
ii)
Storage costs of maintaining the storage space. This includes rental fees,
security services, lights (heat) etc.
4
iii)
iv)
v)
All holding (carrying) costs are totaled and expressed either in terms of dollars per item
per year, or in percentage of the value of the inventory.
E.g. a chair costs sh.40. To keep the chair in inventory for one year will cost H= sh.10.
Alternatively we can say that the holding cost is 25% of the value of the item.
Shortage (or stock out) costs (G)
Shortage costs occur when an item is out of stock and demand is unsatisfied. Depending
on the item under consideration, shortage costs may include of the following
i)
ii)
In the case of finished goods: Cost of ill will (loss of customers) due to
inability to deliver or due to late deliveries.
iii)
In the case replacement parts: Cost of idle machines, idle labor, spoilage of
materials and delays in shipment.
iv)
In other cases: The shortage of blood or ambulance may cost a life and
shortage of fire engines may result in excessive damage caused by a fire.
Shortages may be temporary (back orders), in which case they are eliminated when the
supply arrives; or permanent, in the sense that sales are lost.
Item cost (C) Item (or unit) cost is the price paid for one unit of the commodity under
consideration. It is not a direct inventory cost, as the items must eventually be procured,
but it may be influenced by inventory decisions.
E.g. ordering large quantities may result in a lower price per unit due to quantity
discounts.
5
ii)
iii)
iv)
v)
Assumptions of EOQ
The EOQ model assumes the following
i) The demand for the item is constant over time e.g. two units per day.
ii)
Within the range of quantities to be ordered, the per unit holding cost and ordering
The replenishment is scheduled in such a way that shipments arrive exactly when
the inventory level reaches zero. Therefore there will never be a shortage or a
surplus.
iv)
Since only one item is being considered, orders for different items are
1200
300 boxes at a time.
4
1200
100 boxes at a time.
12
Other ordering policies could also be considered e.g. weekly, semi-annually, or once
every 2 years. The problem faced by management is: which ordering policy is the best?
Solution: Using a trial and error approach
We compute the total annual inventory cost for each of the suggested policies. The policy
with the lowest total cost is the best. The total cost is given by:
Total
annual =
Inventory cost
TC
Total
annual +
ordering cost
TO
Total
annual (1)
Holding cost
TH
(2)
But the number of times an order is placed during the year is given by the total yearly
demand, D, divided by the order quantity, Q
i.e.
ND
(3)
(4)
N= 1, k = 5 TO = 1(5) = 5
Quarterly:
N= 4, k = 5 TO = 4(5) = 20
Monthly:
N= 12, k = 5 TO = 12(5) = 60
Notice that as the order quantity, Q, increases, the total annual cost of ordering decreases.
This is because the larger the order size, the fewer the number of orders placed per year.
Step 2: Find total annual holding cost, TH
7
The total annual holding cost can be computed by multiplying the daily holding cost by
the number of units in inventory each day of the year, and summing. However, since the
inventory level is changing from day to day, the number of units in the inventory
fluctuates over time thus it is easier to solve this problem by using the average inventory
on hand over the year and multiplying by the yearly holding cost.
When the demand is constant, the average inventory is the midway point between the
highest and lowest inventory level.
Since one of the EOQ assumptions requires that the lowest inventory level be zero, the
average inventory equals exactly 1 2 of the maximum inventory.
In the EOQ model, the maximum inventory equals the order quantity, Q. Consequently,
the average inventory = 1 2 of Q
i.e.
Average inventory Q 2
(5)
Q
2
(6)
The total annual inventory holding cost for the three proposed ordering policies is
Annual
Q = 1200,
Quarterly
Q = 300,
Monthly
Q = 100,
2 $720
TH 1.20 300 $180
2
TH 1.20 100 $60
2
TH 1.20 1200
TO
TH
TC
Annual
720
725
Quarterly
20
180
200
Monthly
60
60
120
8
Comparing the three alternatives, the best ordering policy is monthly since it has the
lowest total cost of $120.
However, since other possible ordering policies (e.g. weekly, semi annual) were not
checked, no assurance exists that monthly ordering is indeed the optimal policy. To
check all possible polices may involve much computational work. Therefore a more
efficient method is provided through the EOQ formula.
The EOQ Formula
We have shown that the total cost, TC, can be expressed as
TC TO TH
DK HQ
Q
2
(7)
Where D is the annual demand, k is the ordering cost, H is the holding cost, and Q is the
quantity to be ordered.
The problem is to find that Q for which T.C is the minimum
The EOQ can be obtained through calculus
TC
HQ KD
2
Q
KD H
Q2
2
1
H
2
Q
2 KD
Q2
2KD
H
2KD
H
9
2 KD
H
where K is the ordering cost (in dollars), D is the annual demand (in units) and H is the
holding cost (in dollars per unit per year)
NB: To verify that this is a minimum point, we check for positive 2nd derivative
d 2TC 2 KD
3 0
dQ 2
Q
Since the 2nd derivative is positive (K, D and Q can only take positive values), the point is
a minimum point indeed
Solution to the example:
Q*
2 KD
H
2 5 1200
100 boxes.
1.2
The optimal solution calls for an order size of 100 boxes at a time. For a yearly demand
of 1200 this means 12 orders a year or one a month. Thus the monthly order policy is
indeed optimal.
Additional Information Provided by EOQ
In addition to the size of the order to be placed, the EOQ can be used to provide the
following information
i) The best number of orders to be placed in year. Using equation (3) we find
N
D 1200
12 times
Q * 100
ii) The maximum inventory on hand and average inventory level. The max inventory is
equal to Q * or 100 in this example. The average is one half of Q * , which is 50 in
this example.
10
iii) The number of days supplied. The computation of the EOQ also helps to provide the
number of days supply, d. This information tells management the length of each
inventory cycle. This is given as
d
365
N
In this example
d
365
365
30.4 days
N
12
NB: If the company works less than 365 days a year, use the actual number of days
worked.
iv) The total annual cost. Using equation (7), the total annual cost (excluding the cost of
goods themselves) can now be computed.
TC
DK HQ *
Q*
2
(1200)5 1.2(100)
100
2
60 60 120
Notice that the two components of the total cost, the ordering cost and the holding cost
must equal each other whenever the optimal Q is used ($60 each in the example).
v) The monetary value of an optimal order and of the average inventory. This
information is important since the monetary value of the average inventory is useful
for such purposes as cash flow determination, tax assessment, and calculation of
depreciation.
The monetary value of the EOQ is obtained by multiply Q * by the unit cost. Assume in
the example that the cost of one box of paper is $10.
100 10 $1000 .
That is, the university orders $1000 worth of supplies at a time. Similarly the monetary
value of the average inventory is
100
10 $500 .
2
11
2kD
2 50 200, 000
$10, 000
0.2
200, 000
20 orders per year
10, 000
12
KD Q * H
Q*
2
50(200, 000) (0.2)10, 000
10, 000
2
1, 000 1, 000
$2, 000
TC
Quantity Discounts
Sellers frequently offer buyers a price discount for purchasing large quantities. There
may be several price intervals or price breaks such as $10 each unit for quantities up to
99, $9 each unit for 100 to 499, $8 each unit for 500 up to 999, and $7 each unit for 1000
and over.
The practice of quantity discounts is widely spread since it offers advantages to both the
buyer and the seller. These are listed below together with some possible disadvantages.
Advantages
Buyer
Lower unit price
Disadvantages
Buyer
Larger inventories
Cheaper transportation
Seller
Lower unit changes
A city uses 100 replacement lamps a month for its street lights. Each lamp costs the city
$8. Ordering costs are estimated at $27 per order and the holding costs (primarily the
cost of capital) are 25%.
The city currently orders according to the EOQ. The supplier has now offered the city a
2% discount if the city will buy 600 lamps at a time. Should the city accept the offer?
Solution
Given
D = 100 units per month x 12 months = 1200 units per year
H 0.25 8 $2 per lamp per year
K = $27 per order
EOQ
2 KD
H
2 27 12000
180 lamps
2
DK HQ *
1200 27 2 180
Q*
2
180
2
= 180
To this cost, we add the item cost which is relevant when discounts on the item are
considered. If we let Ci be the item costs at the ith price break, then
Annual cost of items = CD
= $ 8 1200 lamps
= $9600
Thus the total system cost is
$360 + $9600 = $9,960
Review of the discount offer
The offer to buy 600 units at a 2% discount will reduce the item cost, the holding cost
will be higher since the city will buy 600 units. The analysis is shown in the table
below:No discount
Discount
14
Q * = 180
Q = 600 (given)
K = 27
K = 27
D = 1200
D = 1200
H = 2.00
Total annual ordering cost =
180
54
Total annual ordering cost =
Q
600
180
HQ 1.96 600
588
2
2
9600
Total cost
9960
Total cost
9406
10,050
Conclusion: The discount offer should be rejected. The city will be at a disadvantage to
accept it. A higher discount rate should be negotiated instead (e.g. a 5% discount is
favorable).
Example 2: Discounts at several price breaks
A general hospital buys a certain antibiotic from a certain supplier. The drug can be
bought at the following prices:
For quantities of 1 up to 4,999 - $ 2.75 a unit
For quantities from 5000 to 9,999 - $ 2.60 a unit
For quantities over 10,000 units - $2.50 a unit
The demand (D) for the drug in the hospital is 50,000 units per year. There is an ordering
cost (K) of $50 per order and a holding cost of 20% of the cost of the item per unit per
year. The problem is to find the optimal purchasing policy for the hospital.
Solution
*
We find the EOQ (labeled Q1 ) for the lowest price level ($2.50 in our case)
Q1*
2 KD
H
2 50 50000
0.5
3163 Units
15
*
The price $2.50 is for the range of over 10,000. Since Q1 is not within this range, the
Q2*
2 KD
H
2 50 50000
0.2 0.26
3101 Units
*
The price of $2.60 is for the range of 5000 9,999. Since Q2 is not within the range, the
2 KD
H
2 50 50000
0.2 2.75 0.55
3015 Units
Q3* is within the appropriate range for the price of $2.75. Therefore it is a feasible
solution.
Then we compute the total annual cost for the feasible EOQ and compare it with the total
annual cost of each of the minimum quantities required for each price break. The total
annual cost is computed as
TC
DK
Q
HQ
2
Ci D
16
Therefore an order of 10,000 units at a time should be placed since it exhibits the lowest
total cost of $127,750 per year.
17