Академический Документы
Профессиональный Документы
Культура Документы
M9206-xxx-2S Series
Electric Spring Return Actuators
The M9206-xxx-2S Series Actuators are direct-mount,
spring return electric actuators intended for use with
on/off, floating, or proportional controllers. BGx models
operate on AC 24 V power, AGx and GGx models
operate on AC/DC 24 V power, and BAx models
operate on AC 120 V power. These bidirectional
actuators do not require a damper linkage, and are
easily installed on a damper with a round shaft up to
1/2 in. (13 mm) in diameter, or a square shaft up to
3/8 in. (10 mm). They may also be mounted onto
Johnson Controls VG1000 Series Forged Brass Ball
Valves using the M9000-513 or M9000-520 Ball Valve
Linkage Kit.
The M9206-xxx-2S Series Electric Spring Return
Actuators provide a running torque of 53 lbin (6 Nm).
The rotation range is mechanically adjustable. An
integral line voltage auxiliary switch is available on the
xxB models to indicate end-stop position, or to perform
switching functions within the selected rotation range.
Position feedback is provided on proportional control
models through a proportional DC voltage signal.
Slim Profile
Automatic Stroke
Calibration at Installation
Reversible Mounting
Design
Removable Coupler
1
www.johnsoncontrols.com
AC 24 V, AC/DC 24 V, and
AC 120 V Power Options;
DC 0 (2) to 10 V and 0 (4) to
20 mA Input Signal Options
Extended Ambient
Operating Temperature
Limits of -25 to 140F
(-32 to 60C)
Product Details
The M9206-xxx-2S Series Electric Spring Return
Actuators are designed to position air dampers and
valves in Heating, Ventilating, and Air Conditioning
(HVAC) systems. Applications include:
IMPORTANT:
Before specifying
M9206-xxx-2S Series Electric Spring Return
Actuators for plenum applications, verify acceptance
of exposed plastic materials in plenum areas with
the local building authority. Building codes for
plenum requirements vary by location. Some local
building authorities accept compliance to UL 1995,
Heating and Cooling Equipment, while others use
different acceptance criteria.
Operation
When combined with a controller, the
M9206-xxx-2S Series Electric Spring Return Actuator
provides reliable, integrated damper or valve control.
An AC 24 V (BGx models), AC/DC 24 V (AGx models),
DC 0 (2) to 10 V (GGx models), or an AC 120 V
(BAx models) input signal from the controller to the
electric actuator causes the motor to rotate in the
proper direction. Upon loss of power, the electric
actuator returns to its spring return position. Rotation is
mechanically limited to 93 by integral end-stops. An
anti-rotation bracket prevents lateral movement of the
electric actuator.
IMPORTANT:
Do not install or use this
M9206-xxx-2S Series Electric Spring Return
Actuator in or near environments where corrosive
substances or vapors could be present. Exposure of
the electric actuator to corrosive environments may
damage the internal components of the device, and
will void the warranty.
Control
Type
Input
Signal
Feedback
Signal
Auxiliary
Switch
Power
Requirements
M9206-AGA-2S
Floating or
On/Off
N/A
N/A
M9206-AGB-2S
Floating or
On/Off
N/A
One
M9206-BAA-2S
On/Off
N/A
N/A
AC 24 V at
50/60 Hz or
DC 24 V
AC 24 V at
50/60 Hz or
DC 24 V
AC 120 V at 60 Hz
M9206-BAB-2S
On/Off
N/A
One
AC 120 V at 60 Hz
M9206-BGA-2S
On/Off
N/A
N/A
M9206-BGB-2S
On/Off
N/A
One
M9206-GGA-2S
Proportional
AC 18 to 30 V at
50/60 Hz or
DC 24 V
AC 18 to 30 V at
50/60 Hz or
DC 24 V
AC 102 to 132 V
at 60 Hz
AC 102 to 132 V
at 60 Hz
AC 18 to 30 V at
50/60 Hz
AC 18 to 30 V at
50/60 Hz
DC 0 (2) to 10 V or
0 (4) to 20 mA*
DC 0 (2) to 10 V
N/A
M9206-GGB-2S
Proportional
DC 0 (2) to 10 V or
0 (4) to 20 mA*
DC 0 (2) to 10 V
One
AC 24 V at
50/60 Hz
AC 24 V at
50/60 Hz
AC 24 V at
50/60 Hz or
DC 24 V
AC 24 V at
50/60 Hz or
DC 24 V
Description
DMPR-KC003*
7 in. (178 mm) Blade Pin Extension without Bracket for Johnson Controls Direct-Mount
Damper Applications
DMPR-KR003*
Sleeve Pin Kit for Johnson Controls Round Dampers with a 5/16 in. (8 mm) Diameter Shaft
M9000-161
Replacement Anti-Rotation Bracket for M9206-xxx-2S Series Electric Spring Return Actuators
M9000-165
Mounting Kit Used to Mount M9206-xxx-2S Series Electric Spring Return Actuators in
Remote-Mount, Linkage-Driven Applications
M9000-200
Commissioning Tool that Provides a Control Signal to Drive 24 V On/Off, Floating, Proportional,
and/or Resistive Electric Actuators
M9000-513
Linkage Kit Used to Mount M9206-xxx-2S Series Electric Spring Return Actuators to
Johnson Controls 1/2 and 3/4 in. (DN15 and DN20) VG1243 Series, and 1/2 in. (DN15)
VG1644 Series Forged Brass Ball Valves
M9000-520
Linkage Kit Used to Mount M9206-xxx-2S Series Electric Spring Return Actuators to
Johnson Controls 1/2 through 1-1/2 in. (DN15 through DN40) VG12x1, VG12x5, VG18x1, and
VG18x5 Series Forged Brass Ball Valves
M9206-600
Replacement Coupler, Set Screw, and Locking Clip Kit for Mounting M9206-xxx-2S Series
Electric Spring Return Actuators to a Round Shaft Up to 1/2 in. (13 mm) or a Square Shaft Up to
3/8 in. (10 mm)
M9206-601
Replacement Coupler, Set Screw, and Locking Clip Kit for Mounting M9206-xxx-2S Series
Electric Spring Return Actuators to a Round Shaft Up to 5/8 in. (16 mm) or a Square Shaft Up to
9/16 in. (14 mm)
M9206-602
Replacement Locking Clips for M9206-xxx-2S Series Electric Spring Return Actuators
(Five per Bag)
Y65A13-0
Y65S13-0
Set Screw
1-27/32 Radius
(47) Clearance
1-7/32 (31)
2-9/16
(65)
3-1/32
(77)
X
2-X
24
-1
34
X
2-X
24
-1
34
4-29/32
(125)
A
6-1/8
(156)
5/8
(16)
1/8
(3)
6-31/32
(177)
4-1/4
(108)
1-1/4
(32)
15/16
(24)
2-27/32
(72)
2-1/2
(64)
7-3/8
(187)
7-27/32
(199)
3-1/4
(83)
3
(76)
3-3/32
(79)
2-5/8
(67)
3-1/8
(79)
4-5/8
(117)
4-7/8
(124)
5-13/32
(137)
1-19/32
(40)
fig2
1-11/32 (34)
Maximum
2-3/32
(53)
1-3/32
(28)
Technical Specifications
Product
Power Requirements
BGx Models
BAx Models
GGx Models
Transformer Sizing
Requirements
BGx Models
BAx Models
AC 102 to 132 V at 60 Hz
GGx Models
GGx Models
GGx Models
Feedback Signal
GGx Models
xxB Models
Input Signal
Spring Return
Running Torque
53 lbin (6 Nm)
Rotation Range
Rotation Time
Bxx Models
GGx Models
Bxx Models
Cycles
Electrical Connections
Bxx Models
xxA Models
xxB Models
Damper
Applications
Valve
Applications
Mounted onto Johnson Controls 1/2 and 3/4 in. (DN15 and DN20)
VG1243 Series, and 1/2 in. (DN15) VG1644 Series Forged Brass
Ball Valves using M9000-513 Ball Valve Linkage Kit;
Mounted onto Johnson Controls 1/2 through 1-1/2 in. (DN15 through
DN40) VG12x1, VG12x5, VG18x1, and VG18x5 Series Forged Brass
Ball Valves using M9000-520 Ball Valve Linkage Kit
Enclosure
Ambient Conditions
Compliance
NEMA 2, IP42
Operating
Storage
North
America
Shipping Weight
European
Union
Australia and
New Zealand
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these
specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or
misuse of its products.
Controls Group
507 E. Michigan Street
P.O. Box 423
Milwaukee, WI 53201
Published in U.S.A.
www.johnsoncontrols.com