Академический Документы
Профессиональный Документы
Культура Документы
Provides three supervised and programmable outputs for sirens, strobes, and other audiovisual devices
Programmable Outputs
Supervised and Programmable Outputs
The module provides three polarityreversing supervised programmable outputs. The output voltage is
based on the input supply voltage to the module. Supervision is provided by a 12.1 k end-of-line (EOL)
resistor, and there is a polarity reversing circuit for
each of the outputs in the module.
Unsupervised and Programmable Opencollector Outputs
The module provides two unsupervised programmable
opencollector outputs. Installers can use these outputs to activate an external relay, indicator, solenoid,
or other device.
Firmware Upgrades
The firmware of all devices in the MAP system can be
upgraded or updated with the Bosch Remote Programming Software (RPS). This allows for onsite or offsite
(IP through Ethernet) upgrades or updates.
Certifications and Approvals
The module is designed to comply with the certifications and standards
listed here.
Region
Certification
Germany
VdS-C
G111040
Region
Certification
Technical Specifications
Europe
CE
Electrical
Operating Voltage:
Installation/Configuration Notes
100 mA maximum
150 mA maximum
Programmable Outputs:
5 outputs:
2 unsupervised and programmable opencollector outputs able to
sink up to a combined current of
0.5 A at 28 VDC.
3 supervised and programmable
outputs rated at 1 A each.
7
6
1
2
Mechanical
Dimensions:
146 mm x 159 mm x 76 mm
(5.75 in. x 6.25 in. x 3 in.)
1.
Weight:
440 g (1 lb)
2.
Indicator:
3.
4.
5.
6.
COM 2 port
7.
COM 1 port
8.
Environmental
Operating Temperature:
Storage Temperature:
Relative Humidity:
IP 30
Enclosure Protection:
Communicator Interfaces
The DE module has seven dedicated outputs and two
dedicated inputs for connection to a communicator via
the AT 2000 ribbon cable connector.
Printer Interface
Use:
Compatibility Information
Control Panels
Parts Included
Quant.
Component
Accessory pack
Three 12.1 k EOL resistors
AT 2000 ribbon cable
Two 4pin terminal plugs (green)
Three 2pin terminal plugs (orange)
One 3pin terminal plug (orange)
One 6pin terminal plug (yellow)
Ordering Information
MAP DE Module
Provides two RS232 COM ports; three polarityreversing supervised programmable outputs for sirens,
strobes, and other audiovisual devices; two unsupervised programmable opencollector outputs, and seven
dedicated outputs for communicator.
Order number ICP-MAP0007
Accessories
AT 2000 Analog, installation module
For installation in control panel housing, for transmission of alarm and fault messages via the ISDN telephone network
Order number 3002130732
AT 2000 ISDN, incl. case
Represented by:
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6258 5511
Fax: +65 6571 2698
apr.securitysystems@bosch.com
www.boschsecurity.asia