Академический Документы
Профессиональный Документы
Культура Документы
: Industrial Instrumentation II
: 25.7.14/AN
: 2 Hrs
PART - A
Sem / Year:VI/III
Degree / Branch :BE/EIE
Total Marks: 75
10X01 = 10 mark
PART - B
Answer all the Questions.
10X02 = 20 marks
Orifice plate
1. Low cost
1. High cost
Venturi Tube
2. Widely used between 3.175
and 1828.8 mm of pipes
2. Generally not useful below
76.2mm pipe size
meters?
a. Type of fluid used b. Pressure loss thro season c. Range
ability.
6. What are the disadvantages of dall tube?
1. High pressure tap 2. Inlet cone 3.Throat 4.Out let cone 5. Low
pressure tap
8. What are the difference between dall tube and pitot tube?
Dall tube
1. Low head loss
2. Not considered for
measuring flow of hot feed
water.
Pitot tube
1. No process loss
2. It can be used to measure
hot feed water flow also.
03X15 = 45 marks
V2 = M(2g / w) (P1-P2)
Q = Cd M A (2g / w )(P1-P2)
where Cd=CcCv
3. Explain the principle of the pitot tube?
Actual velocity
2 gh
Vact=cv
Cv= coefficient of pitot-tube
4. Explain the dall tube principle?
____