Академический Документы
Профессиональный Документы
Культура Документы
2
How many Telnet sessions can take place simultaneously on a router running a standard edition of the IOS?
4
*5
8
10
3
What is a disadvantage of cut-through switching?
decrease in bandwidth
increased latency
4
Which of the following are data link layer encapsulation details? (Choose two.)
T style connectors
*baseband transmission
6
A LAN is to be added to an unused router Ethernet interface. What steps must be performed to configure this
interface to allow connectivity to the hosts on this LAN? (Choose two.)
The router must be put in setup mode in order for the interface to be configured.
7
Which media types can be used in an implementation of a 10BASE-T network? (Choose three.)
Category 5 UTP *
Category 5e UTP *
Category 3 UTP *
coaxial cable
multi-mode fiber
single mode fiber
8
If 4 bits are borrowed from the host field of a Class C address to create subnets, what will the range of usable host
addresses be in the last subnet?
.224 to .239
.225 to .239
.225 to .254
.241 to .254
.241 to .255
*.240 to .255
9
Which of the following describe how a device on a LAN builds a table of MAC addresses? (Choose two.)
10
Which of the following best describes how the Gigabit Ethernet, Media Access Control method views the link?
ring
shared bus
point-to-point *
star
extended star
11
What is the purpose of Positive Acknowledgment and Retransmission (PAR)?
PAR allows the presentation layer to request that data be resent in a format the destination host can process.
PAR provides a mechanism for the receiving device to request that all segments be retransmitted if one segment is
corrupt.
*PAR helps ensure that a number of data segments sent by one host are received by another host before additional
data segments are sent.
PAR is used to renegotiate the window size during the synchronization process.
12
Which criteria identify a Class B address? (Choose two.)
13
An administrator has made routing protocol changes to a router's configuration. To ensure that the changes are
implemented, the active configuration is saved and the router is reloaded. After the router has initialized, the output
on the screen displays "Would you like to enter the initial configuration dialog?[yes/no]:" Why did this dialog appear?
14
What operations are performed during router initialization? (Choose three.)
*A valid configuration file is loaded from NVRAM if specified by the configuration register.
*A question driven setup menu is presented if a valid configuration file cannot be loaded.
15
For a network manager planning the installation of a new network, which of the following will be needed to implement
a typical 10BASE-T network installation? (Choose three.)
RJ-11
BNC connectors
RJ-48 patch cables
RJ-45 connectors *
Category 5 UTP cables *
hubs or switches *
16. A company with a Class B license needs to have a minimum of 1,000 subnets with each subnet capable of
accommodating 50 hosts. Which mask below is the appropriate one?
255.255.0.0
255.255.240.0
255.255.255.0
*255.255.255.192
255.255.255.224
17
A network administrator can establish a remote session to a host using the Router> telnet 192.168.1.1 command but
is unsuccessful when using the Router> telnet Boston command to connect to the same interface. Which of the
following could be the problem? (Choose two.)
The command telnet Boston was issued from the wrong router prompt.
18
Which of the following network components would be considered Layer 1 devices? (Choose three.)
*hub
router
bridge
switch
*repeater
*transceiver
19
What is the maximum distance that 10BASE-T will transmit data before signal attenuation affects the data delivery?
*100 meters
185 meters
300 meters
500 meters
20
What is the result of executing the erase startup-config command?
21
Which of the following imposes boundaries on broadcast traffic?
Bridge
Repeater
*Router
Transceiver
22
Which utility shows the route a packet takes to reach its destination?
netstat
ping
Telnet
*traceroute
23
Which device is considered a multi-port bridge?
hub
router
*switch
gateway
transceiver
repeater
24
What organization developed the TCP/IP reference model?
25 Which of the following is true regarding CDP and the graphic shown?
*If routers D and E are running different routing protocols, they will not exchange CDP information.
26
How would an administrator configure a static route for use if a primary route failed?
configure the route with a metric greater than the default value
*configure the route with an administrative distance greater than the default value
27
Convert the Hexadecimal number A2 into its Base 10 equivalent. Select the correct answer from the list below.
156
158
160
*162
164
166
28
*What happens on an Ethernet network after a collision occurs? (Choose three.)
Devices involved in the collision have a random period of time for priority retransmission of the damaged packet.
The devices involved in the collision release a token indicating the time each station may begin retransmitting.
*The devices involved in the collision do not have priority to transmit data.
29
Which of the following types of networks pass a token sequentially to each host? (Choose two.)
Ethernet
*Token Ring
*FDDI
Frame Relay
ISDN
30
What is the length of a MAC address?
8 bits
8 bytes
24 bits
24 bytes
*48 bits
48 bytes
address resolution
end-to-end communication
*flow control
path determination
*data representation
32
Routers have different types of memory. Choose the answer that describes RAM.
33
Which command will display routing table information about all known networks and subnetworks?
34
Which of the following statements describe distance vector routing updates? (Choose three.)
*Path cost metrics for each route are included in the updates.
Periodic updates are sent directly to every router in the network.
*Routers send only the state of their own links in distance vector updates.
35
Which ICMP message type notifies source hosts that a receiving host or network is not available?
time exceeded
redirect
*destination unreachable
source quench
parameter problem
echo reply
36
How many total subnets are created by applying the subnet mask 255.255.252.0 to a Class B network?
*64
252
255
1024
37
Which of the following conditions will cause a router using holddown timers to ignore an update?
type-of-service
identification
flags
*time-to-live
header checksum
39
Which of the following is a network type that is widely used in dialup networking?
shared media
point-to-point
*point-to-multipoint
40
When a network administrator applies the subnet mask 255.255.255.248 to a Class A address, for any given subnet,
how many IP addresses are available to be assigned to devices?
1022
510
254
126
30
*6
41
Cisco Discovery Protocol (CDP) operates at which OSI Layer?
physical layer
network layer
*data link layer
presentation layer
42
Which protocol can be used to load or retrieve Cisco IOS images to or from a router?
SNMP
*TFTP
UDP
TCP
43
Which of the following is a transport layer protocol of the TCP/IP model?
FTP
*UDP
IP
TFTP
44
Which of the following is created with switched full-duplex transmission?
45
Which of the following IP addresses are broadcast addresses if the subnet mask is 255.255.255.240? (Choose
three.)
*75.32.75.15
205.16.35.11
*199.254.129.111
*129.130.17.143
135.22.55.93
105.33.62.213
46 What type of routing uses information that is manually entered into the routing table?
dynamic
interior
*static
standard
47
What is used to resolve known IP addresses to unknown MAC addresses?
*ARP
DNS
DHCP
RARP
48
Which of the following OSI layers offers reliable, connection-oriented data communication services?
session
*transport
network
data link
49
Which of the following are benefits of creating a subnetwork structure in an IP network? (Choose three.)
50
How many IP addresses can be assigned to host devices on each subnet of a Class B network with a subnet mask of
255.255.255.248?
30
51
After a Telnet session has been suspended, which actions will restart the session? (Choose two.)
52
Which layer of the OSI model covers physical media?
*Layer 1
Layer 2
Layer 3
Layer 4
Layer 5
Layer 6
53
Which protocol is used by FTP to transfer files over the Internet?
*TCP
SMTP
UDP
SNMP
54
Which of the following factors should be considered when selecting a routing protocol to be implemented in an
enterprise network? (Choose three.)
*bandwidth consumption
router location
55
A ping 192.1.1.20 command is issued on workstation A to determine if workstation B can be reached. What events
will occur if this command is successful? (Choose two.)
The router will reply to the echo request with a proxy ping response.
Boot mode
Config mode
Setup mode
Startup mode
57
Which protocol of the TCP/IP model internet layer provides connectionless, best-effort-delivery of datagrams?
ARP
ICMP
IP
RARP
*TCP
DNS
58
Which of the following does a router use to make a forwarding decision?
*destination IP address
MAC address
source IP address
encapsulation address
default gateway
59
Routers have different types of memory. Choose the answer that describes NVRAM.
60
Which statement is correct concerning routing and routed protocols?
A routed protocol allows the routers to communicate with other routers and maintain tables for a routing protocol.
A routing protocol allows routers to communicate with other routers and maintain tables for a routed protocol.