Академический Документы
Профессиональный Документы
Культура Документы
How do you do air conditioning calculations on the capacity of air conditioner for your
room? This calculation is important because if done wrongly, you will end up installing
an oversize or undersize equipment. An oversized air conditioner is not good as the
compressor will run and stop regularly and not able to cool the room uniformly.
It will also cause discomfort to the occupants as the dehumidfication of the room is not
properly done. On top of that, the electricity bill will be high as the compressor turns on
and off too often.
Every time the on/off type of compressor starts to run, its power consumption is 6
times higher than when it is running steadily.
The cycling on and off of the compressor will lead to shorter life span of the compressor
besides having to spend more on the unit price and installation cost.
An undersized unit will not be able to cool the room properly and more so if the weather
is hot.
Cooling Capacity
Cooling capacity for a room is defined as the heat load in a room that have to be
removed in order to achieve a certain room temperature and humidity. The typical
design is set to 24C temperature and 55% Relative Humidity.
Study shows that this combination of temperature and RH is the most conducive for the
human body. The unit used to measure heat load is BTU/hr. 1 BTU/hr is the heat energy
needed to increase 1 pound of water by 1F.
When choosing an air conditioner, usually a 1 HP (horse power) equipment is able to
remove 9,000 BTU/hr of heat. With better technology, some machines are able to
remove 10,000 BTU/hr of heat with the same capacity. The higher the listed BTU/hr, the
greater the cooling capacity.
Calculating the cooling capacity needed for your room is a complicated process as there
are many factors to consider. However, there is a simple rule of thumb that you can use
to estimate the required cooling capacity for your room. Use this result to compare with
the calculation done by the air conditioning contractors for your own checking purposes.
Step 1
Find the volume of your room in cubic feet. This is done by measuring the length, width
and height of the room in feet and multiply all the three dimensions together.
Volume = Width X Length X Height (cubic feet)
Step 2
Multiply this volume by 6.
C1 = Volume X 6
Step 3
Estimate the number of people (N) that will usually occupy this room. Each person
produces about 500 BTU/hr of heat for normal office-related activity. Multiply this two
figures together.
C2 = N x 500 BTU/hr
Step 4
Add C1 and C2 together and you will get a very simplified cooling capacity needed for
the room.
Estimated Cooling Capacity needed = C1 + C2 (BTU/hr)
The type of material of the room and windows are also important consideration.