Академический Документы
Профессиональный Документы
Культура Документы
13
Page 2
M0125ANA.DOC
TABLE OF CONTENTS
1
GENERAL
1.1
1.2
1.3
ABOUT COMMSCOPE
INTERNATIONAL CONTACT ADDRESSES FOR CUSTOMER SUPPORT
CONTENT CHANGES COMPARED TO PREVIOUS MANUAL VERSIONS
WELCOME TO A.I.M.O.S.
9
10
13
15
2.1
WHAT IS A.I.M.O.S.
2.2
COMMENTS ON THE MANUAL
2.2.1
Meaning of Symbols
2.2.2
Installation Instructions for A.I.M.O.S.
2.3
SYSTEM REQUIREMENTS FOR A.I.M.O.S.
2.4
GENERAL GUIDELINES
2.4.1
Installation Guidelines
2.4.2
IE Settings
2.4.2.1
IE Cache Settings
2.4.2.2
IE Security Configuration
2.4.2.3
IE Compatibility Settings
2.4.3
External Backup
2.5
A.I.M.O.S. CONTAINS
2.5.1
A.I.M.O.S. Programs (Accessible via Start Menu)
2.5.2
Services Used by A.I.M.O.S.
2.5.3
Optional A.I.M.O.S. Components
2.5.4
Test Tools (for Andrew technicians only)
2.5.5
Related Manuals
2.6
A.I.M.O.S. - CLIENT/SERVER
2.7
OMC3/ A.I.M.O.S. - SERVER INSTALLATION
2.8
CITRIX INSTALLATION
15
15
15
15
16
16
16
17
17
17
18
18
19
19
19
20
20
20
21
22
22
3
4
23
25
4.1
4.1.1
4.1.2
4.2
4.3
4.3.1
4.3.2
4.4
4.5
4.6
PREPARATIONS
Preparation of OMC 3.54 for the Combined Installation with A.I.M.O.S.
Map (Optional Tool)
A.I.M.O.S. SETUP
A.I.M.O.S. UPDATE
A.I.M.O.S. Server Update
A.I.M.O.S. Client Update
MIGRATION FROM WINDOWS 2003 32 BIT TO WINDOWS 2008 64 BIT
HOW TO GET A.I.M.O.S. LICENSED
LOGIN SETTINGS
A.I.M.O.S. CONFIGURATION
5.1
SERVER CONFIGURATION / CONFIGURATION TOOL
5.1.1
Licenses
5.1.2
General - IP Parameters
5.1.3
Security
5.1.3.1
Password Settings
5.1.3.2
Account Settings
5.1.3.3
LDAP Settings
5.1.3.4
Visualization Login with LDAP
25
25
25
26
30
30
30
32
33
35
39
39
40
41
43
44
45
46
48
Page 3
Page 4
48
49
49
49
49
49
49
50
50
50
51
51
51
52
52
52
52
53
53
53
55
57
61
63
63
64
64
65
65
65
66
67
69
71
76
76
76
76
77
79
79
80
81
81
85
86
87
88
88
89
89
M0125ANA.DOC
A.I.M.O.S. - OPERATIONS
6.1
NE MANAGEMENT - OVERVIEW
6.2
MENUS
6.2.1
File
6.2.2
Tools
6.2.3
Tree
6.2.4
View
6.2.5
Extras
6.2.6
Window
6.2.7
Menu ?
6.3
NE TREE
6.4
VISUALIZATION FILTERS AND SORT OPTIONS
6.4.1
Table Filters
6.4.1.1
Column Selection and Customizing
6.4.1.2
Sort Options and Calculations
6.4.1.3
Managing Table Filters and Sort Options
6.4.2
Using the Filter Builder
6.4.3
Network Element Filter
6.4.3.1
Customizing a Filter with the NE Filter Builder
6.4.3.2
Filter Settings
6.4.3.3
Importing a Filter from the Scheduler
6.4.3.4
Filter Type Conversion
6.5
ADD NEW NETWORK ELEMENT (NE)
6.5.1
Node X
6.5.1.1
Basic Parameter Setting
6.5.1.2
Dial Parameter Setting
6.5.2
AMR
6.5.3
MCPA
6.5.4
ION-B Controller Type TSUN1, TSUN2, TSUN3 and TSUN6
6.5.5
ION-U System / ION-E System
6.5.6
ION-M Optical System Controller Type RMC, MMC Plus, TSUN4
6.5.7
SMS Network Element
6.5.7.1
MRx18
6.5.7.2
DICE
6.5.7.3
MIR-T
6.5.7.4
ION-M MiniMaster
6.5.7.5
Generic
6.5.7.6
Generic 1
6.5.7.7
Generic 2
6.5.7.8
MR2003P
6.5.7.9
MR2133
6.6
ADD NEW FOLDER
6.7
NETWORK ELEMENT OPERATIONS
6.8
FUNCTIONS BAR
6.8.1
Supervision
6.8.1.1
Alarm History
6.8.1.2
Alarm Help
6.8.2
Configuration
6.8.3
Maintenance
6.8.4
Notes
6.8.5
Log
91
91
92
93
95
95
97
98
99
99
100
103
103
103
104
104
105
105
106
107
107
108
109
109
109
110
113
114
115
117
118
119
120
120
121
121
121
122
122
122
122
123
123
125
126
127
127
128
136
138
138
Page 5
Page 6
138
139
140
140
141
142
142
143
144
145
145
145
145
145
146
146
146
148
149
149
151
152
153
157
159
162
166
171
172
173
174
175
179
180
180
182
182
183
183
183
183
184
184
184
184
185
185
185
185
185
185
185
186
186
M0125ANA.DOC
6.15
TOOL WATCHDOG
6.16
TOOL PERFORMANCE MANAGER (OPTION)
6.16.1
Menus
6.16.1.1 Performance
6.16.1.2 Chart
6.16.2
Settings
6.17
TOOL PROFILES
6.17.1
Connectivity Manager Profiles
6.17.2
NE Owner Profile of Account Manager
6.17.3
Configuration Groups of Preferences Editor
6.17.4
Alarm Profiles
6.17.5
Export Profiles
6.17.6
External Tool Profiles
6.18
OMC3 ADAPTER
6.19
SNMP GUI
186
186
187
188
188
188
196
197
197
198
199
201
202
203
203
205
7.1
7.1.1
7.1.2
7.1.3
7.1.4
7.2
7.2.1
7.2.2
7.2.3
7.2.4
7.2.5
7.2.6
7.2.7
7.3
7.3.1
7.3.2
7.3.3
7.4
7.4.1
7.4.2
7.5
8
8.1
8.2
8.3
8.4
BACKUP
Backup to File
Include A.I.M.O.S.
Include OMC3
Backup Finished
RESTORE
Restore from File
Restore A.I.M.O.S.
Restore OMC3
The List of Backups
Restore Configuration Tool Settings
Backup Version
Restore Finished
VALIDATE
Include A.I.M.O.S.
Include OMC3
Validation Finished
UPDATE
Update From File
Update Finished
WATCHDOG
205
205
206
206
206
206
207
207
207
207
207
208
208
208
209
209
209
209
210
211
211
213
AGENT SIM
COMAS TEST
MIB
TRAP MONITOR
213
215
216
216
LOGGING
9.1
LOG FILE DOCUMENTATION
9.1.1
Log File Overview
9.1.2
Log File Contents
9.1.2.1
Installation and Uninstalling
9.1.2.2
Database Server Operations
9.1.2.3
Connection to OMC3
9.1.2.4
Database Maintenance Operations
9.1.2.5
Automatic Database Backup
217
217
217
217
217
218
218
219
219
Page 7
220
220
221
221
222
222
10 TROUBLESHOOTING
223
10.1
10.2
10.3
223
224
227
RAS CONNECTIONS
TECHNICAL SUPPORT
LICENSE INSTALLATION
11 GLOSSARY
12 APPENDIX A MODEM INSTALLATION AND CONFIGURATION
13 APPENDIX B DIAL-IN CONNECTIVITY
229
231
235
13.1
DIAL-IN SERVER CONFIGURATION
235
13.1.1
Security Policy
235
13.1.1.1 Local Security Policy
235
13.1.1.2 Domain Security Policy
236
13.1.2
User Account Data
238
13.1.2.1 Adding a Local Dial-in User
238
13.1.2.2 Adding a Domain Dial-in User
240
13.2
REMOTE ACCESS SERVER CONFIGURATION FOR WIN2003 SERVER
STANDARD EDITION
242
13.2.1
RRAS Server Configuration
242
13.2.2
RRAS Server Configuration Wizard
243
13.2.3
RRAS Server Properties
245
13.2.4
RRAS Policy
248
13.3
REMOTE ACCESS SERVER CONFIGURATION FOR WIN2008
252
13.3.1
RRAS Server Configuration
252
13.3.2
RRAS Server Configuration Wizard
254
13.3.3
RRAS Server Properties
259
13.3.4
Network Policies
262
13.4
TESTING THE REMOTE ACCESS SERVER CONFIGURATION
266
13.4.1
Procedure for Win2003
266
13.4.2
Procedure for Win2008
270
273
14.1
14.2
273
274
CERTIFICATE SELECTION
CERTIFICATE INSTALLATION
15 INDEX
Page 8
277
M0125ANA.DOC
1 General
1 GENERAL
1.1 ABOUT COMMSCOPE
CommScope is the foremost supplier of one-stop, end-to-end radio frequency (RF)
solutions. Part of the CommScope portfolio are complete solutions for wireless
infrastructure from top-of-the-tower base station antennas to cable systems and
cabinets, RF site solutions, signal distribution, and network optimization.
CommScope has global engineering and manufacturing facilities. In addition, it
maintains field engineering offices throughout the world.
Andrew Wireless Systems GmbH based in Buchdorf/ Germany, which is part of
CommScope, is a leading manufacturer of coverage equipment for mobile radio
networks, specializing in high performance, RF and optical repeaters. Our optical
distributed networks and RF repeater systems provide coverage and capacity
solution for wireless networks in both indoor installations and outdoor environments,
e.g. tunnels, subways, in-trains, airport buildings, stadiums, skyscrapers, shopping
malls, hotels and conference rooms.
Andrew Wireless Systems GmbH operates a quality management system in
compliance with the requirements of ISO 9001 and TL 9000. All equipment is
manufactured using highly reliable material. To maintain highest quality of the
products, comprehensive quality monitoring is conducted at all fabrication stages.
Finished products leave the factory only after a thorough final acceptance test,
accompanied by a test certificate guaranteeing optimal operation.
The declaration of conformity for our products is available upon request from the
local sales offices or directly from CommScope.
To make the most of this unit, we recommend you carefully read the instructions in
this manual and commission the unit only according to these instructions.
For technical assistance and support, contact the local office or CommScope directly
at one of the following addresses listed in the next chapter.
Page 9
1.2
United States
CommScope Canada
Phone
+1-905-878-3457 (Office)
+1-416-721-5058 (Cell)
Phone
+1-888-297-6433
Fax
+1-905-878-3297
Fax
+1-919-329-8950
wisupport@commscope.com
E-mail wisupport@commscope.com
Caribbean & South American Region
(CALA)
Rua Guaporanga, 49
Praa Seca Rio de Janeiro RJ
ZIP: 21320-180
Brazil
Phone
+1-815-546-7154 (Cell)
+55-15-9104-7722 (Office)
Phone
+52-1-55-5419-5260 (Cell)
+52-55-1346-1900 (Office)
Fax
+ 55-15-2102-4001
Fax
+52-55-1346-1901
wisupport@commscope.com
wisupport@commscope.com
APAC Countries:
China, India and Rest of Asia
Andrew International Corporation
Unit 1
153 Barry Road
Campbellfield
VIC 3061
Australia
Phone
+852-3106-6100
Phone
+613-9300-7969
Fax
+852-2751-7800
Fax
+613-9357-9110
wisupport.China@commscope.com
wisupport.Australia@commscope.com
Page 10
M0125ANA.DOC
1 General
Europe:
United Kingdom
Scandinavia
Phone
+44-1189-366-792
Phone
+ 47 32-12-3530
Fax
+44-1189-366-773
Fax
+ 47 32-12-3531
wisupport.uk@commscope.com
wisupport@commscope.com
Germany
France
CommScope France
Immeuble Le Lavoisier
4, Place des Vosges
92052 Courbevoie
France
Industriering 10
86675 Buchdorf
Germany
Phone
+49-9099-69-0
Phone
+33-1 82 97 04 00
Fax
+49-9099-69-930
Fax
+33-1 47 89 45 25
wisupport@commscope.com
wisupport@commscope.com
Austria
Switzerland
Weglgasse 10
2320 Wien-Schwechat
Austria
Tiergartenweg 1
CH-4710 Balsthal
Switzerland
Phone
+43-1706-39-99-10
Phone
+41-62-386-1260
Fax
+43-1706-39-99-9
Fax
+41-62-386-1261
wisupport.austria@commscope.com
wisupport.ch@commscope.com
Italy
Via Mengolina, 20
48018 Faenza (RA)
Italy
Phone
+39-0546-697111
Phone
+34-91-745-20 40
Fax
+39-0546-682768
Fax
+34-91-661-87 02
wisupport.italia@commscope.com
wisupport.iberia@commscope.com
Page 11
Czech Republic
CommScope Solutions Czech Republic
C-Com, spol. s r.o
Mail
U Moru 888
53006 Pardubice
Czech Republic
Phone
Fax
wisupport@commscope.com
South Africa
Andrew Wireless Solutions Africa
(PTY) LTD
11 Commerce Crescent West
Eastgate, Sandton
PO Box 786117
Sandton 2146
South Africa
PO Box 48 78 22
Unit 3206, Floor 32,
Jumeirah Business Center 5,
Jumeirah Lakes Towers,
Dubai
United Arab Emirates
Phone
+971 4 390 09 80
Phone
+ 27 11-719-6000
Fax
+971 4 390 86 23
Fax
+ 27 11-444-5393
wisupport@commscope.com
wisupport@commscope.com
Page 12
M0125ANA.DOC
1 General
Chapter
Content
Update of IE Settings
2.4.2
4.3.2
Description updated
5.1.3
Screenshot updated
5.1.3.2
Header renamed,
description added
5.1.3.1
Description updated
Message changed
5.5.2
5.2
Description updated
Description added
6.4
6.5, 6.5.5
Descriptions added
6.5.1, 6.9
Descriptions updated
6.10.3,
6.10.3.7
6.11
Description updated
Description added
Page 13
Content
1.2
Addresses updated
2.2.1
4.2
5.2
6.2.1
6.10.2
6.10.3
Editorial change
6.10.3.8
13.4.2
Page 14
M0125ANA.DOC
2 Welcome to A.I.M.O.S.
2 WELCOME TO A.I.M.O.S.
2.1 WHAT IS A.I.M.O.S.
Andrew Integrated Management and Operating System, called A.I.M.O.S. is a
comprehensive software that gives the ability to control and monitor network
elements (NE) in mobile networks.
A.I.M.O.S. is an OMC (Operation and Maintenance Center), based on the state-ofthe-art in operating complex network systems. The software bundle A.I.M.O.S.
contains an SNMP Northbound Manager (option), Map (option), Scheduler (option),
Performance Manager (option), as well as Visualization clients. All these
sophisticated power tools enable unlimited control and maintenance of network
elements in mobile networks.
2.2 COMMENTS ON THE MANUAL
The A.I.M.O.S. software is delivered with a detailed context-sensitive Online-help,
which is available at any window of the program (press F1) with the respective help
item. The Online-help is based on the A.I.M.O.S. Users Manual in electronic form.
2.2.1
Meaning of Symbols
Page 15
OS
WIN 2003
Server R2
Standard
Edition, 64
bit
CPU
Intel Xeon
> 2 GHz
RAM
Network
8 GB
100 MBit
LAN
Client
Recommended
WIN 2008
Server R2
Standard
Edition, 64
bit
2 x Intel
Xeon > 3
GHz
16 GB
1 GBit LAN
Disk
Space
100 GB
200 GB
Display
1280 x
1024
1280 x 1024
WEB
Browser
Internet
Explorer 8
Internet
Explorer 9
Minimum
Recommended
6 Users
12 Users
Windows
XP SP3
Pro, 32
bit
Windows 7
Pro, 64 bit
WIN 2008
Server R2
Standard
Edition, 64 bit
WIN 2008
Server R2
Standard
Edition, 64 bit
Intel
Core i5
Intel Core i7
2 x Intel Xeon
> 3 GHz
4 x Intel Xeon
> 3 GHz
8 GB
32 GB
48 GB
1 GBit LAN
1 GBit LAN
1 GBit LAN
20 GB
500 GB
1.000 GB
1920 x 1200
1280 x 1024
1280 x 1024
Internet
Explorer 9
Internet
Explorer 9
Internet
Explorer 9
4 GB
100 MBit
LAN
10 GB
1280 x
1024
Internet
Explorer
8
Installation Guidelines
The Connectivity Manager of A.I.M.O.S. uses RAS connections of the
operating system (Windows RAS). Each modem to be used (SMS, RAS
Incoming connection, RAS Outgoing connection) has to be installed in the
operating system.
Each modem to be used for Incoming connections has to be added to the RAS
Incoming Connections.
To use the Web Interface of A.I.M.O.S., set the browser (IE) settings to:
Never dial a connection in [Tools-Internet Options-Connections-DialUp and Virtual Private Network settings].
None of the three checkboxes in [Tools-Internet Options-ConnectionsDial-Up and Virtual Private Network settings-LAN Settings] must be
checked.
Page 16
M0125ANA.DOC
2 Welcome to A.I.M.O.S.
2.4.2
IE Settings
IE Cache Settings
IE Security Configuration
Please note that the security level High set for the Internet Zone will not work. It is
necessary to set the six listed IE security options accessible via Open Tools
Internet Options Security Internet Zone Custom Level as follows:
2.4.2.3
IE Compatibility Settings
2.4.3
External Backup
For an external backup of the A.I.M.O.S. server (e.g. with Acronis), the complete
server must be shut down.
Page 18
M0125ANA.DOC
2 Welcome to A.I.M.O.S.
Designation
Short Description
Server
Use to start the Configuration Tool for the
Configuration configuration of A.I.M.O.S. server settings.
all
Server
Use to start the Maintenance Tool for the
Maintenance A.I.M.O.S. SW & database maintenance.
7 A.I.M.O.S. Database
Administration /
Maintenance Tool
System
Information
SNMP GUI
2.5.2
Designation
Short Description
OMC3
Adapter
SNMP Agent
Connector
Tool
WatchDog
Page 19
2.5.3
Short Description
Map
SNMP
Northbound
Manager
Scheduler
Performance
Manager
LDAP
2.5.4
Designation
Short Description
AgentSim
ComasTest
MIB
8.3 MIB
2.5.5
Related Manuals
Title of Manual
Manual
M0125B5x_ODBC_
AIMOS_Vx.pdf
M0125B6x_AIMOS_
Auto_Backup.pdf
M0125B7x_XML_IF
_AIMOS_Vx.pdf
<Title>.pdf
<Title>.pdf
<Title>.pdf
Page 20
Location
A.I.M.O.S. CD
"~\Andrew\AIMOS\MIB
\<Title>.pdf
M0125ANA.DOC
2 Welcome to A.I.M.O.S.
A.I.M.O.S. Installation Variants
The following figures show three variants depending on the managed network
elements.
The Firebird data base server is installed under the NETWORK Service Account.
2.6 A.I.M.O.S. - CLIENT/SERVER
NMS
Visualization
Visualization
Client
POP3,
SMS receiver
LAN
SNMP
Agent
Server
Excel file and ODBC:
- Alarm Data
- Inventory Data
- General Repeater
Data
- Config Data
- Connectivity Data
DB
Export
ServerConfig
Tool
email,
SMS
Server Maintenance
Tool
Firebird
Connector
binary
LAN, GSM
or Packet
Data
binary
MMR/ION-M
System
SMS
SNMP
GSM/
SMS
Repeater with
SMS IF
GSM, UMTS
or
Packet
Data
LAN, GSM
or Packet
Data
Node
A/M/C/G
SNMP
BriteCell/ION-B
SNMP
Page 21
SNMP
Agent
Visualization
Visualization
Server
email,
SMS
Export
Import
OMC3
Adapter
DB
Foxpro
DB
Firebird
Connector
Connector
ASCII
GSM
binary
LAN, GSM
or Packet
Data
ASCII
MR & MOR
Systems
A.I.M.O.S.
server
installation
for
all
generation
repeater
systems. GUI runs on
the server only. OMC3
module (for 1st and 2nd
generation systems) is
shown at the left part.
SMS
SNMP
GSM/
SMS
binary
Repeater with
SMS IF
MMR/ION-M
System
Node
GSM, UMTS
or
Packet A/M/C/G
Data
LAN, GSM
SNMP
or Packet
Data
BriteCell/ION-B
SNMP
CITRIX Client
Front
FrontEnd
End
Visualization
Visualization
LAN
Front
FrontEnd
End
Visualization
Visualization
CITRIX Server
Export
Import
DB
Foxpro
OMC3
Adapter
Connector
ASCII
MR & MOR
Systems
Page 22
email,
SMS
DB
Firebird
Connector
ASCII
GSM
SNMP
Agent
A.I.M.O.S. installation
with Citrix for all
generation
repeater
systems. GUI runs
remotely
as
Citrix
client.
binary
LAN, GSM
or Packet
Data
binary
MMR/ION-M
System
SMS
SNMP
GSM/
SMS
Repeater with
SMS IF
Node
GSM, UMTS
or
Packet A/M/C/G
Data
LAN, GSM
SNMP
or
Packet
Data
BriteCell/ION-B
SNMP
M0125ANA.DOC
Details
Software
Installation
Activate License
Key
Server
Configuration
User Management
Account Manager
Modem
Management
Connectivity
Manager
Option SNMP
Northbound
Manager
Option Integration
of OMC 3.54
Visualization and
Customization of
A.I.M.O.S.
* The OMC 3.54 is the last OMC version available and the only one still supported by A.I.M.O.S.
Therefore, this manual only refers to OMC 3.54 whereas the online help still sticks to the more general
designation OMC 3.x(x).
Page 23
What to do
Modem
Configuration
Details
See chapter
12 Appendix A
Modem
Installation and
Configuration
What to do
Details
Dial-In
Connection
Page 24
See chapter
13 Appendix B
Dial-In
Connectivity
M0125ANA.DOC
4 Installation Procedures
4 INSTALLATION PROCEDURES
4.1 PREPARATIONS
Note: Please observe that for detailed information about port and firewall settings a
separate document (the Whitepaper Architectural Examples for secure data
network environments of Andrew Repeater Elements, Data Connections and
Components) is available.
When using A.I.M.O.S. or OMC 3.54 in a Citrix environment the Installation Mode
of Citrix must be activated in advance.
4.1.1
For A.I.M.O.S. to run with an OMC 3.54 on the same machine, the following steps
have to be executed before A.I.M.O.S. is installed:
In case ION (MMR) systems are integrated into the OMC 3.54, these systems have
to be manually deleted and later manually integrated into A.I.M.O.S.
The OMC3 Adapter of A.I.M.O.S. does not support the automatic data transfer of
these systems into A.I.M.O.S.
The OMC3 users and their defined rights are not mapped automatically to A.I.M.O.S.
due to a different logic. This information has to be transferred manually. A helpful
option in the OMC3 is to print a list of the users and their rights.
The OMC3 SNMP agent has to be stopped. The traps are all transferred to
A.I.M.O.S. via the OMC3 Adapter (see chapter 6.18) and forwarded via the
A.I.M.O.S. Northbound SNMP Agent (see chapters 5.1.4 and 5.5) which is based
on the A.I.M.O.S. database. Take care that the distinguished names of the network
elements that are mapped on A.I.M.O.S. side to the field trap info are entered.
Otherwise for that specific NE the alarms would not be forwarded via the SNMP
Northbound Agent.
Make sure that the OMC3 IP Server is stopped. This server scans automatically and
locks the RAS entries on the server, but together with A.I.M.O.S. at least a couple of
them are reserved for A.I.M.O.S. and the supervision of the 3rd generation NE.
The automatic backup of the OMC3 has to be stopped. For the common scenario
the backup is triggered from the Server Maintenance Tool. To execute a backup
either manually or automatically out of the OMC 3.54 application could lead to data
inconsistency between the OMC3 database and the A.I.M.O.S. database.
Every OMC3 application has to be stopped manually before the installation of
A.I.M.O.S. After the A.I.M.O.S. setup the OMC3 Adapter service will only start
up correctly in case any OMC3 application was completely stopped.
4.1.2
Map (Optional Tool)
This tool is based on the product Microsoft Map Point. Please follow the installation
instructions given by Microsoft. For details about the A.I.M.O.S. Map tool please see
chapter 6.14.
Prior to using this tool:
a license for A.I.M.O.S. with tool Map included has to be installed,
Microsoft MapPoint 2006 or 2009 with the correct maps (e.g. for Europe or the
US) has to be installed.
Page 25
Page 26
M0125ANA.DOC
4 Installation Procedures
TestTools: This test tool (Hardware Simulation tool) is for Commscope technicians
only. It is not part of the A.I.M.O.S. application package and can be used for system
analysis.
SNMP Agent: This service is necessary for the SNMP Northbound Interface. It must
be selected for using SNMP alarm forwarding.
A.I.M.O.S. Client: This is the A.I.M.O.S. GUI.
OMC3 Adapter: Install this part only if A.I.M.O.S. has to run with OMC 3.54.
(By
clicking
Back
changes
to
the
installation setup can be
made.)
Page 28
M0125ANA.DOC
4 Installation Procedures
Click Finish.
Page 29
As soon as an A.I.M.O.S. server update is finished, the client update will start
automatically with the next start of any Visualization client. But - depending on the
client and/or server version - the automated update may not be possible or restricted:
Client Version (update from ... to)
Automatic Update
from version V2.12 onwards to a version >/=V2.13
Possible *
Restrictions for Server Versions
With 64-Bit versions of Windows7 the client update is only working if Windows
option run as admin is chosen. *
Uninstall the according old client and carry out the new setup.exe again, available
either from the A.I.M.O.S. CD or via download.
*
Page 30
M0125ANA.DOC
4 Installation Procedures
Note: An automatic update of an A.I.M.O.S. client requires Windows admin rights,
otherwise the Login screen will appear again.
If the following warning is
displayed initially, close it by
choosing 'No' and start the
Visualization anew.
Then, the actual client update procedure starts. Depending on the software version
not all of the screens shown in the following may be displayed. In any case, confirm
all screens you get with 'Yes'.
Page 31
2.
Check with "add or remove programs" and "Modify" which optional features are
installed, e.g. TestTools, SNMP Agent, Server, Client, OMC3 Adapter.
3.
Install A.I.M.O.S. version 2.8 or higher* with the same optional features as
before and, if possible, to exactly the same location as at the Windows 2003
system. Please note:"C:\Program Files" could not be possible due to windows
restrictions. If applicable, install all A.I.M.O.S. patches as before. Please note: If
your Windows 2003 Server was updated, no patch installation is required
anymore.
5.
Copy the database backup zip file from the Windows 2003 system to the
A.I.M.O.S. installation.
6.
If applicable: Copy all repeater update files from the Windows 2003 system to
exactly the same location resp. to the relative location.
Shut down the Windows 2003 Server or at least deactivate all tasks in scheduler
8.
If possible: Make sure that its IP address is now used by the Windows 2008
Server. Otherwise all IP connections from A.I.M.O.S. to a repeater have to be
updated (because all repeaters still refer to IP address of the old A.I.M.O.S.
Server).
9.
If applicable: Switch all modems from the Windows 2003 system to the Windows
2008 system and make sure that incoming and outgoing connections are
working properly. Please also refer to chapter 13 Appendix B Dial-In
Connectivity.
10. Make a restore of the A.I.M.O.S. installation at the Windows 2008 Server with
the A.I.M.O.S. Maintenance Tool. Restore the most recent backup zip file from
the Windows 2003 A.I.M.O.S. installation.
Please Note: If your installation is now located in another directory, e.g.
"C:\Program Files (x86)", do not check the option "Restore Server Configuration
Tool Settings". In this case after restore a review of all settings in the Server
Configuration / Configuration Tool is mandatory.
*
The installed A.I.M.O.S. version at the windows 2003 system and at the windows 2008 system has
to be identical.
Page 32
M0125ANA.DOC
4 Installation Procedures
11 To basically check your new installation, proceed as follows:
11.1 Perform a database validation with the A.I.M.O.S. Maintenance Tool, then
check the database integration.
11.2 Perform a "Try Connection" to all repeaters, to check if each connection is
working properly.
11.3 Check all log files for hints or pending adaptations.
11.4 If applicable: Check all scheduled repeater updates in the Tool Scheduler
(Option).
Page 33
Page 34
M0125ANA.DOC
4 Installation Procedures
Make the required entries, i.e. Server IP (= IP Adress of the A.I.M.O.S. Server) and
Server Port (= Server Port of the WatchDog) for setting information see
explanation of login dialogue in the Server and Client Settings section on the next
page). Confirm with the Enter key or by clicking the button Change A.I.M.O.S.
Server IP / Port (each connection try is shown in the status bar) to get to the login
dialogue, where the entries made will be adopted.
It is also possible to close the window without making these entries by clicking the
red X; in that case, the entries have to be made in the login dialogue.
After a successful first login the WatchDog message will no longer be displayed in
subsequent logins.
In case the window is displayed again or does not close, please verify the network
settings of the A.I.M.O.S. Server and A.I.M.O.S. Client as well as those of the
network used (e. g. firewall settings, etc.).
Page 35
Page 36
M0125ANA.DOC
4 Installation Procedures
If no valid license is at hand, abort the login by clicking No. You can resume the
process as soon as a license is available, either directly by starting the A.I.M.O.S.
Visualization anew (continue here) or via the Server Configuration / Configuration
Tool as explained in chapter 4.5.
Upon clicking Yes a window to choose the license file will open:
Browse to the
location
where
the license file is
stored and open
it.
Upon clicking OK the license will be installed and the following confirmation is
displayed:
Page 38
M0125ANA.DOC
5 A.I.M.O.S. Configuration
5 A.I.M.O.S. CONFIGURATION
Please note: All settings made in the following chapters (except 5.8 to 5.10) are
included in an A.I.M.O.S. backup file, so it is recommendable to make a new backup
if settings in the A.I.M.O.S. Configuration Tool or other configuration settings
described in the next chapters were changed.
5.1 SERVER CONFIGURATION / CONFIGURATION TOOL
Select StartPrograms Andrew A.I.M.O.S.
Server Configuration
* Please note: Only users with the "Administrator Role" assigned (see chapter 5.4.3.1) are allowed to
start the Sever Configuration.
The Security page is only available for the user Admin irrespective of the user role
assigned.
Click the button 'Reload' to delete the changes made in the current session and to
display the actual settings.
Use the Backup button to make a backup of all current "Configuration Tool" settings
(except those of the page Licenses) in an "A.I.M.O.S. Settings File", which is an
A.I.M.O.S.-specific file format ending on "set" that cannot be changed.
Use the Restore button to restore all "Configuration Tool" settings (except those of
the page Licenses).
Note:
Please observe that these Backup / Restore buttons are not identical to the
A.I.M.O.S. database backup/restore described in chapters 7.1 & 7.2. However, some
of the settings saved or restored by them are also part of the A.I.M.O.S. database
backup/restore.
Page 39
5.1.1
Licenses
The following items and tools can be activated by the A.I.M.O.S. license:
Number of NEs
Expiration date (one option is endless)
Map
Scheduler
Performance Manager
LDAP
These items may cause a new or additional license key request. For more
information please contact Andrew Wireless Systems product support.
Regarding the licensing procedure and important restrictions to be observed, see
also chapter 4.5 How to get A.I.M.O.S. licensed.
Open the tab Licenses. Click the Add license button to register the license key for
A.I.M.O.S.
Double-clicking the license key file in the explorer at the PC where the database is
installed will automatically add the new license key.
Please note: In case of any problems during license installation, refer to the
corresponding Troubleshooting chapter 10.3.
Page 40
M0125ANA.DOC
5 A.I.M.O.S. Configuration
5.1.2
General - IP Parameters
Path / Description
Default
7420
162
50000
5060
7422
Default shutdown
timeout (Minutes)
* This setting must be consistent with the Server Port of the WatchDog of the Visualization (see 4.6).
Page 41
Parameter
Path / Description
Default
Modem Session
Timeout (Minutes)
Alarm Limiter
Recovery Time
(Minutes)
10
When an alarm of a specific type (e. g. Amplifier alarm) from a specific NE is raised
by the NE for the first time, and then cleared by the NE (= first red bar / first alarm
in the illustration above), the Alarm Limiter Recovery Time setting does not yet take
effect.
This alarm will be raised and cleared in the A.I.M.O.S. Visualization as notified by
the according NE via the A.I.M.O.S. southbound interface.
If the same alarm is notified again by the same NE a second time (or several
times) after the first alarm was cleared in an interval that is smaller that the recovery
time (t1) set (= green bars 1. 4. in the illustration above), the A.I.M.O.S.
Visualization will show this condition in two ways:
1. NE-generated alarm:
Even if this specific alarm is raised (and cleared) several times in intervals below
the recovery time (t1) set, it will be shown in the A.I.M.O.S. Visualization as one
single alarm (= second blue bar in the middle line in the illustration above) of this
specific alarm type, e. g. Amplifier alarm.
2. Intermittent Alarm generated by A.I.M.O.S.:
Additionally, the A.I.M.O.S. Visualization shows an Intermittent Alarm (= first blue
bar in the bottom line in the illustration above) to inform the user that a series of
recurring alarms is visualized as one. This indication also specifies the alarm type
concerned.
Page 42
M0125ANA.DOC
5 A.I.M.O.S. Configuration
Example:
5.1.3
Security
Select Server Configuration Tool / Security (only available for user Admin
irrespective of the user role assigned) to check or edit Password Settings (see
5.1.3.1), Account Settings (see 5.1.3.2), and (in case a license for LDAP is installed)
LDAP Settings (only available if a license for LDAP is installed; see 5.1.3.3).
Page 43
5.1.3.1
Password Settings
As a general restriction, using passwords that may easily be guessed is not allowed.
Thus, it will not be possible to use passwords containing for example:
Upper or lower case variations of all the excluded words listed above are not allowed
either.
Minimum Password Length
Passwords should have a length in the range from 5 to 40 characters. The value in
this field specifies how long the password must be at least *. Each password must
fulfill this requirement.
* for scheduler action Configure Node A User as explained in chapter 6.10.3.6 the maximum setting
possible is 16
A modification in the security level will result in an obligatory password change with
the next login if the current password does not match the new regulations. In that
case the system will prompt the user to set a new password when he logs in again.
Page 44
M0125ANA.DOC
5 A.I.M.O.S. Configuration
Initial Password Durability
This value within a range from 0 to 744 hours sets the length of time the initial
password of a newly created account is valid until the first login is required to change
the password. When the set period expires before the initial password has been
changed, the account is disabled. A value of 0 indicates, that the password will never
expire; use this value in order to disable the password expiration facility.
Note: For enabling locked accounts use the Account Manager (see 5.4.4).
Password Durability
This value within a range from 0 to 365 days decides the period of days after which
passwords will expire. A value of 0 indicates, that the password will never expire; use
this value in order to disable the password expiration facility. If a password has
expired, a login is prevented until a new password is assigned.
Password History
This value in a range from 1 to 255 specifies the number of distinguished passwords
that must be used before a certain one can be used again. A value of 3 indicates, for
example, that three different passwords must have been used in between before a
password can be used once again, i.e. the user may have a list of four passwords in
circulation.
5.1.3.2
Account Settings
These settings specify the criteria for account lockouts due to invalid login attempts
or for user account deactivation after a definable inactivity period.
Please observe that the first two settings apply to the Administrator account, as well.
Account Lockout Threshold
This value (3 - 255 is possible) sets the number of invalid login attempts that are
allowed before an account (incl. Administrator) is locked out temporarily as specified
in the Account Lockout Duration.
Account Lockout Duration
This value sets the length of time (1 - 1440 minutes is possible) an account (incl.
Administrator) is locked after the Account Lockout Threshold has been reached.
Permanent Account Lockout Threshold
This value (3 - 255 is possible) sets the number of invalid login attempts that are
allowed before an account (excl. Administrator) is disabled.
Example: If the Account lockout threshold is set to 5, the Account lockout duration to
30, and the Permanent Account lockout threshold to 6, the according account will be
locked after 5 invalid login attempts for 30 minutes before another login attempt is
possible. If this fails, too, the number of 6 invalid attempts is reached and the account
will be disabled after the next invalid attempt.
Maximum User Account Inactivity (Days)
If an account is not used for the period set in this field, it will be deactivated
automatically. Settings from 0 to 365 days are possible; the default value is 90
(setting 0 means the feature is not used, i.e. inactivity of an account will not lead to its
deactivation).
Page 45
5.1.3.3
LDAP Settings
Use these fields to configure the settings for user management via Windows Active
Directory (LDAP). Please observe that these settings are only displayed if an LDAP
license is installed.
Before configuring these settings in A.I.M.O.S., LDAP must be configured a follows:
The client computer (where AIMOS_Visu.exe is executed) needs to be a member of
a domain that is managed by an Active Directory Domain Controller. The LDAPdriven login also requires that the current Windows user is a domain user within the
same domain. Within the Active Directory, the user account must be assigned to a
global user group that corresponds to one of the A.I.M.O.S. user roles.
The server must support the Active Directory services and the LDAP interface. LDAP
must be accessible from the client side; thus the server and client side firewall must
allow this.
LDAP Enabled
Use to enable / disable this function on A.I.M.O.S. pages.
When activated, the LDAP (Lightweight Directory Access Protocol) interface
synchronizes between the user information base of a LDAP-connected server and
the user and role system built into A.I.M.O.S. The server side is typically realized by
an instance of the Active Directory (AD) service on a Microsoft Windows Server
based computer.
To achieve this, A.I.M.O.S. queries the active directory, using the configured LDAP
path, whenever a windows user (i.e. a member of the configured domain) attempts to
log on in the AIMOS_Visu program. Please note that this does not happen for a user
named "Admin".
In the active directory, the group membership state of the requesting user is queried
for groups that are named starting "AIMOS_" (see example below). The group names
configured in A.I.M.O.S. are looked up in the list of AD group memberships by putting
the text "AIMOS_" in front of each role name found in the AIMOS account manager.
Thus, the A.I.M.O.S. role name "Standard User Role" would match an AD group
membership of a group exactly named "AIMOS_Standard User Role" etc.:
Page 46
M0125ANA.DOC
5 A.I.M.O.S. Configuration
After successfully querying the AD via LDAP, the user information found in the AD is
replicated into the A.I.M.O.S. user base and the user group memberships found in
the AD is reflected into the role membership.
Moreover, if a user is found to be disabled or non-existing in the AD, this is also
replicated into A.I.M.O.S. by disabling this user. By replicating the user and role
information into the A.I.M.O.S. user database, a user would still be able to log on to
AIMOS_Visu if the AD server would become temporarily unavailable. Note that for a
local logon, the user would need to have a known password. As replicated users
does not have a password by default (and also an empty password would not be
accepted of course), the A.I.M.O.S. Admin would need to assign a password to a
replicated user in the Account Manager first, in order to enable such a user to logon
without LDAP access.
Note:
Please also observe that after the expiration of the LDAP license all users that were
created via LDAP will be automatically deactivated. Users explicitly created or
changed (e. g. by a new password) by the Admin will stay active. All users
deactivated due to license expiration will also remain inactive when LDAP is
activated again.
LDAP Domain
Enter the name of the domain. Only Windows users who are member of this domain
can take advantage of the LDAP interface feature.
LDAP Path
Enter the LDAP Path using LDAP URL syntax like this:
LDAP://myserver/cn=Users,dc=mydomain,dc=com
LDAP Connect String
This is the connect string that used to configure the OLE DB Provider for Microsoft
Directory Services.
Example that uses an Administrator account from domain mydomain to query the
server:
Provider=ADsDSOObject;User
ID=mydomain\Administrator;Password=mypassword;Encrypt
Password=True;Mode=Read;Bind Flags=0;ADSI Flag=-2147483648
To configure the connect string, use this example as a template and change the
values for the User ID and the Password fields according to your needs.
Page 47
5.1.3.4
Please observe that LDAP will affect the login to the Visualization, only, if all of the
following conditions are fulfilled:
an LDAP login to A.I.M.O.S. has been assigned to the user currently logged in to
Windows
Instead of the general field for entering the Username a choice between the
A.I.M.O.S. user "Admin" and the user currently logged in to Windows is provided for
this field. If the current Windows user is selected, no password entry is required. (In
the examples above the Windows user "Administrator" was logged in.)
5.1.4
Notes: For port settings also see Security Whitepaper as explained in chapter 4.1.
The screen shot above includes the SNMPv3-specific fields (listed in section
5.1.4.9). Without SNMPv3 these will not be available.
Page 48
M0125ANA.DOC
5 A.I.M.O.S. Configuration
5.1.4.1
The default listening port of a SNMP Agent is 161. In order to avoid conflicts with the
Microsoft SNMP Agent, which might be installed on some computers and already
using the default port, the A.I.M.O.S. SNMP Agent uses port 163 by default.
If this value is set to the default SNMP Agent port, the Microsoft SNMP Agent must
not
be
installed
or
must
not
use
port
161;
i.e.
the
file
[WinDir]\SYSTEM32\DRIVERS\ETC\SERVICES must not assign port 161 to
snmp/udp.
5.1.4.2
With A.I.M.O.S. the SNMP managers which receive an alarm notification in case an
alarm arises can be defined. The SNMP managers have to be defined with IP
address and IP port. If the IP port is not entered, this default port is used. Path:
ServerConfigTool | SNMP Northbound| Default Port for outgoing SNMP Traps;
default: 162.
5.1.4.3
If the A.I.M.O.S. SNMP agent is stopped, a shutdown notification for the SNMP
manager is sent. Enter a shutdown delay (in seconds). The A.I.M.O.S. SNMP agent
will be shut down after this delay, i.e. the A.I.M.O.S. SNMP agent will wait for the
acknowledgements of this notification before it is stopped.
5.1.4.4
If the SNMP Login is used (via A.I.M.O.S. Login), community names are created by
the A.I.M.O.S. SNMP agent. Enter the length of the name in the range of 1 to 40
chars, default is 8 chars.
Note: The longer the name the saver is the connection.
5.1.4.5
In case the SNMP Manager is not capable to perform the login process (via
A.I.M.O.S. login), a Private Community Name can be entered here. With this private
community name full access (administrator rights) to the MIB is allowed. Do not enter
a private community name if the SNMP Manager shall use the login process.
5.1.4.6
SNMP requests, which are unknown to the A.I.M.O.S. SNMP agent can be forwarded
to another SNMP agent. Enter the IP address of this alternative SNMP agent. The
default value is IP address 127.0.0.1, i.e. unknown requests are forwarded to the
Microsoft SNMP agent running on the same computer like the A.I.M.O.S. SNMP
Agent.
Page 49
5.1.4.7
SNMP requests, which are unknown to the A.I.M.O.S. SNMP agent can be forwarded
to another SNMP agent. Enter the IP port of this alternative SNMP agent. The default
value is IP port 161.
5.1.4.8
The A.I.M.O.S. SNMP Agent supports 3 MIBs. Usually the A.I.M.O.S. MIB should be
used unless the higher level supervision system requires a specific MIB for reading
the alarm table or restarting the alarm synchronization:
Otherwise A.I.M.O.S. MIB should be selected, even if OMC3 Trap Format or Nokia
Trap Format is needed. In case of the A.I.M.O.S. MIB any Trap Format can be
selected in the A.I.M.O.S. Visualization program, Northbound Manager.
If NE3S is selected as "MIB Supported by the Agent", the additional field
"Translation Scheme for Nokia DN" is available to choose the name scheme to be
used for NEs. Available are Legacy, Improved, or Extended. For more details, refer
to the Nokia NetAct manual under "~\Andrew\AIMOS\MIB\Q0217RHA.pdf"
5.1.4.9
SNMPv3-related fields
For customers using SNMPv3 the following additional fields are available:
Supported Security Models and Levels
Security Engine ID
Security Level
User Name
Authentication Algorithm
Authentication Password
Encryption Algorithm
Encryption Password
These are described in detail in the AIMOS SNMPv3 Configuration Guide which is
provided for customers using this feature. For the location of this guide see section
2.5.5.
Page 50
M0125ANA.DOC
5 A.I.M.O.S. Configuration
5.1.5
OMC 3
Note: For port settings also see Security Whitepaper as explained in chapter 4.1.
IP Parameter
Description
IP Address of the
OMC3 Adapter
Enter the server port of the PC (or network interface) where the
OMC3 adapter is installed. The default port is 7421
OMC3 Database
File Location
The OMC3 adapter integrates alarms of repeater systems of the first and second
generation, which are supervised by an OMC3.54.
5.1.6
5.1.6.1
A.I.M.O.S. offers the possibility to send emails in case alarms arise. Enter the SMTP
server. Enter the IP address or the Host name.
5.1.6.3
If a SMTP server is installed, a server port number can be entered, which can differ
from the standard server port number (25).
Note: For port settings also see Security Whitepaper as explained in chapter 4.1.
5.1.6.4
HELO Name
Page 52
M0125ANA.DOC
5 A.I.M.O.S. Configuration
5.1.6.6
SMPP
To use this protocol, a Short Message Service Centre (SMSC) must be reachable
from the A.I.M.O.S. server over an IP connection and the SMSC must provide a
SMPP account that supports both sending and receiving short messages over a fix
phone number. The A.I.M.O.S. Connector acts as a SMPP client while the SMSC is
the server. The client role is also referred to as an External Short Message Entity
(ESME).
Once the SMPP settings are completed and this service is Enabled (by tagging the
according field), a new "virtual modem" named "SMPP-Gateway" will show up in the
Connectivity Manager where this virtual modem can be used in communication
groups just as regular modems.
Source Address (own Phone No): Enter the phone no. from which the SMS
messages will be sent.
The Registered Delivery option can be used to request delivery receipts from the
SMSC, which will be included in the log files and can help in troubleshooting.
Page 53
Page 54
M0125ANA.DOC
5 A.I.M.O.S. Configuration
5.1.8
Housekeeping
Use to set how many days certain data should be saved either on the A.I.M.O.S.
server file system or in the A.I.M.O.S. database. Depending on the type of data
select to 'Delete database data older than x days' or to 'Delete archive files older than
x days'.
The screenshot above shows the preset default values of the parameter x; for the
individual value ranges of x refer to the explanations in the following.
Watchdog Logs: (see also chapter 9.1.2.7)
a) Delete database data older than x days
not configurable since there are no database data
b) Delete archive files older than x days
The archive files are deleted from the hard disk after the set number of days.
The range for x is 1 to 365 days.
Checks as to which files have to be deleted are carried out once a day.
Connector Logs: (see also 9.1.2.8)
a) Delete database data older than x days
not configurable since there are no database data
b) Delete archive files older than x days
The archive files are deleted from the hard disk after the set number of days.
The range for x is 1 to 365 days.
Checks as to which files have to be deleted are carried out once a day.
SNMP Agent Logs: (see also 9.1.2.11)
a) Delete database data older than x days
not configurable since there are no database data
b) Delete archive files older than x days
The archive files are deleted from the hard disk after the set number of days.
The range for x is 1 to 365 days.
Checks as to which files have to be deleted are carried out once a day.
Page 55
Page 56
M0125ANA.DOC
5 A.I.M.O.S. Configuration
Page 57
M0125ANA.DOC
5 A.I.M.O.S. Configuration
Alarm Polling: Alarm Polling parameters are only available when the tool Scheduler
is not licensed.
Use to customize the polling settings. How individual NEs are included into Alarm
Polling is described in chapter 5.6 Alarm Polling.
Alarm Polling Active: Set the check-mark to activate alarm polling. (This parameter
can also be set in Configuration General as explained in chapter 5.6.)
Time Plan Settings: Select a time interval for polling.
Next Run Time: This field indicates the next execution date and time according to
the Time Plan Settings with the check-mark enabled.
NE: Sequential Delay Seconds: Interval time between pollings of individual network
elements.
Severity Icons: Customize the colors for each severity level. The NE-icons in the NE
Tree and in the supervision will change their color immediately after saving.
Note: If the Map is opened, close and reopen it to adopt the severity colors.
Alarm Settings:
Auto Recognition: Check the severity levels which shall be recognized
automatically in the list box.
With activated Auto Recognition, alarms will be transferred from the active alarm list
to the alarm history as soon as they have been cleared. If not, each alarm requires
an additional manual recognize by an A.I.M.O.S. user.
Note: It is recommended to activate Auto Recognition if alarms are just
forwarded and not maintained in A.I.M.O.S. Alarms need not to be recognized
in the A.I.M.O.S. database.
Cannot Handle Information Alarms: In some cases it is possible that the customer
system cannot handle the alarm severity Information. In this case set the checkmark to treat information as warnings.
Alarm Representation
Audible Alarm Notification: Select Control Panel Settings if an audible alarm
notification is desired.
Show Alert Box: Display a message box: Settings can be Always, if active alarms
are not in view, or Never (= default value).
Show Alert Cause: Settings can be Any new alarm or Severity getting worse.
Show Alarm List in Severity Colors: Tag to show the background colors of the
alarm list in Supervision in the colors designated to the levels in Preferences
Editor / Severity Icons.
Page 59
Page 60
M0125ANA.DOC
5 A.I.M.O.S. Configuration
Please observe that access to this tool can be configured in the Account Manager
rights as explained in chapter 5.4.2.
StartAll ProgramsAndrew A.I.M.O.S.Visualization.
In A.I.M.O.S. Visualization select Tools / Connectivity Manager.
First of all customize the connection settings with this tool.
Page 61
Page 62
M0125ANA.DOC
5 A.I.M.O.S. Configuration
5.3.1
Discover Modems
Click Discover Modems to discover connected modems. A.I.M.O.S. will start directly
a modem scan and the progress will be displayed in an information window. New
modems connected will be displayed separate columns in the Connectivity Manager.
Discover modem can only be executed when all modems are idle.
5.3.2
Modem Groups
5.3.3
Profiles
Note: In each profile but SMSC profile specific data can be substituted by <?>.
This is helpful if NE-specific access data are required. Click the button
Query to insert the substitute <?>. This will cause the query of this
parameter on the Connectivity Page of the NE when editing the
connection data.
Each profile window provides the following buttons to create new or delete existing
profiles and to undo or save the settings made.
The following profiles, which are also accessible via the menu Tools Profiles (see
chapter 6.17), can be generated:
5.3.3.1
RAS-in Profiles
Incoming remote access profiles have to be configured for the incoming connections
from the NEs to A.I.M.O.S.
Page 64
M0125ANA.DOC
5 A.I.M.O.S. Configuration
5.3.3.2
Configure the Network Element Packet Switched Profiles for the connection modes
'packet switched always on' or 'packet switched on demand' used in NEs.
Name: Assign a name to the PS profile.
Network Initialization String: Enter the additional init string if required.
Network Access Number: Enter phone number of packed data network.
Authentication User Name: Enter username for packet data connections.
Authentication Password: Enter password for packet data connections.
5.3.3.4
With the SMS Service Center Profiles an SMS service center number will be
assigned to modems in A.I.M.O.S. / NE.
SMS Service Center Number: Insert the phone number of the service center.
Name: Assign a name to the SMS profile.
Page 65
5.3.3.5
These profiles serve to set specific login credentials for an NE. They are assigned to
an NE via the Configuration / Connectivity tab of the functions bar (see chapter 6.9).
The default Network Element WEB Login Profiles (one per NE type) are factory-set
before delivery. These are:
- ION-M Default
- ION-B Default
- Node M Default
- AMR Default
- Node C Default
- MCPA Default
- Node G Default
- MRx18 Default
- Node A Default
They will be used if the option <use defaults> is set as WEB-Login Configuration on
the Connectivity page of the NE (see section 6.9.5.2)
Parameters can be changed if desired or new profiles can be created:
Name: Assigned name of the profile.
Username: Username to login to the according NE.*
Password: Password to login to the according NE.*
* For the default usernames and passwords refer to the Users Manual of the according NE.
Page 66
M0125ANA.DOC
5 A.I.M.O.S. Configuration
A right-mouse-click on a user name opens a contextmenu for editing the user settings (items depending on
user rights / roles; see chapters 5.4.2 & 5.4.3).
When Login using this User is chosen, the system will
log out of the current Visualization session and open
the login screen for the selected user.
When changing a password using this menu (Change
Password) please observe the obligatory Security
restrictions explained in chapter 5.1.3. If the new
password is not accepted, the reason is indicated in
the status bar of the dialogue:
A password may be rejected for the following reasons (for information regarding the
password requirements see chapter 5.1.3):
Too Short
Password is smaller than required minimum password length.
Too Simple
Password does not fulfill some basic requirements (e. g. "123456789").
Invalid
Password contains invalid signs or does not fulfill the configured PW standard.
Mismatch
Password has already been used within the Password History setting.
Please note: A possible temporary lockout will be reset by a password change.
If LDAP is enabled (chapter 5.1.3.3), passwords cannot be changed.
Page 67
In order to reactivate such an account, set the check mark for 'User Active' in the
Edit User window (see also section 5.4.4) and it will be Enabled again:
Page 68
M0125ANA.DOC
5 A.I.M.O.S. Configuration
5.4.1
Organizations
Select
Country
and
Organization from the list.
Page 69
Page 70
M0125ANA.DOC
5 A.I.M.O.S. Configuration
5.4.2
All roles are displayed. Access rights (read and/or write access rights) can be
maintained easily by using roles.
Please note: No user can change his own rights. To revoke rights e.g. from predefined administrator role, please create a new role with "Account Management"
rights and log in with a user attached to this role.
Click Insert to add a role.
Page 71
The following tables show the actions, tools, menus, or tabs that will be affected by
the according (A.I.M.O.S.) right
Note: The common features Tree, Help, and Info are available irrespective of any
right.
Page 72
M0125ANA.DOC
5 A.I.M.O.S. Configuration
Only if the according Read and Write rights in the following table are granted, the
corresponding features listed are available without any restriction:
Read & Write Available feature
Tool Account Manager
Account
Import new Organizations
Management
NE Owner Profiles
Alarm Clear
Manual Clear
Accessible via
Menu Tools
Menu File
Tool Profiles
Right mouse click on
alarm,
or
Menu
Extras, or Supervision
Alarm Delete Manual Delete
tab (> Alarm History)
Configuration tab
Functions bar
Get GPS Position
GPS Position button /
Show updated GPS Position
NE Operation
NE Configuration Group Profiles Tool Profiles
External Tool Profiles
Tool Profiles
Set Time
Reboot
Send Service Center Number *
Network
Element
Send Configuration *
Operation
Set Factory Default *
Finish Installation
Configuration
Read Unique System
Tool Preferences Editor 1)
Menu Tools
Check Detected Channels 2)
HW/RF tab:
Cell Allocation
Uncheck All 2)
2)
Check Unused Channels
Check Sequence of Channels 2)
HW/RF tab:
2)
Mobile Allocation
Uncheck Sequ. of Channels
Uncheck All 2)
NSOG Filter New 3)
Functions bar
NSOU Filter New 3)
Rename (of a component name) Menu Tree or 4)
Tool Connectivity Manager
Menu Tools
SMS Center Profiles
Connectivity A.I.M.O.S. RAS-in Profiles
Management NE Circuit Switched Profiles
Menu Tools > Profiles
NE Packet Switched Profiles
NE WEB Login Profiles
Log
Management
Maintenance
*
1)
2)
Chapter
5.4
6.2.1
6.17.2
6.2.5
6.8.1
6.8.1.1
6.8.2
6.17.3
6.17.6
6.7
5.2
6.8.2
6.8.2
6.2.3
5.3
6.17.1
Menu Tools
Tool Log Manager
6.13
Functions bar
6.8.3
NE Operation
6.7
SMS-connected NE only
Restrictions to certain sections / features possible depending on other rights see other entries in
table(s);
3)
4)
Node G only
ION only
right-mouse click in NE Tree
Page 73
Accessible via
Menu Tools
Chapter
6.14
Menu Tree
6.2.3
Menu Tools
5.5
Menu Tools
Tool Profiles
Tool Profiles
Menu Tools
6.16
6.17.4
6.17.5
6.10
Menu Extras or
Functions bar > tab
Supervision
6.2.5
6.8.1
Menu Tools
Additionally, all of the unrestricted features in the following tables are available as
well.
If the according Read rights in the following table are granted, the corresponding
features listed are available generally on a read-only basis; features that are
available without restriction are marked 1):
Read
Account
Management
Available feature
Tool Account Manager
NE Owner Profiles
Configuration tab with all
subordinate tabs, except Web tab
GPS Position button
NE Configuration Group Profiles
Insert / Edit / Delete
Get Time 1)
Query All 1)
Export NE Data to 1)
1)
Configuration XML-Import File
NE Configur. Group Profiles 1)
Try Connection 1)
Read Network Structure 1)
Read HID 1)
Accessible via
Menu Tools
Tool Profiles
Chapter
5.4
6.17.2
Functions bar
6.8.2
Tool Profiles
Notes tab
6.17.3
6.8.4
Network
Element
Operation
6.7
Menu View
Menu Tools
6.2.4
5.2
M0125ANA.DOC
5 A.I.M.O.S. Configuration
Read
Available feature
Tool Connectivity Manager
Connectivity
section
of
tool
Preferences Editor
SMS Center Profiles
A.I.M.O.S. RAS-in Profiles
NE Circuit Switched Profiles
NE Packet Switched Profiles
NE WEB Login Profiles
Tool Job Monitor 1)
Tool Log Manager
Show Visu Log entry in tool P.E. 1)
Log tab 1)
Logging Enabled 1)
Maintenance tab
Backup 1)
Export to file 1)
Tool Map
Locate in Map 1)
Show Map 1)
Accessible via
Menu Tools
Chapt.
5.3
Menu Tools
5.2
Network
Element List
Northbound
Management
Performance
Manager
Reporting
Scheduler
Tool Scheduler
Scheduler section of tool P.Editor 1)
Connectivity
Management
Job Monitor
Log
Management
Maintenance
Map
Menu
Tools
Profiles
>
6.17.1
Menu Tools
Menu Tools
Tool Pref. Editor
Functions bar
Menu Tree
Functions bar
NEO / Button
Menu File
Menu Tools
6.12
6.13
5.2
6.8.5
6.2.3
6.8.3
6.7
6.2.1
6.14
Menu Tree
6.2.3
Menu Tools
6.11
Menu Tools
5.5
Menu Tools
Tool Profiles
Supervision tab
Maintenance tab
Log tab
HID / Inventory Data
Alarm History
Notes tab
Tool Pref. Editor
Menu Tools
Tool Pref. Editor
Supervision tab
Alarm Settings
6.16
6.17.4
6.8.1
6.8.3
6.8.5
6.8.3
6.8.1.1
Display of Alarms
1)
1)
Menu Extras
NEO
Supervision tab
Menu ?
Menu View
Menu View
6.8.4
6.10
5.2
6.8.1
6.8.2
6.2.5
5.10
6.7
6.8.1.2
6.2.7
Supervision
Alarm Help 1)
Topology
Standard View 1)
NSO View 1)
6.2.4
Severity Icons / Alarm Settings /
Alarm Representation
Preferences Editor
5.2
(sections of tool Pref. Editor) 1)
Read right alone w/o effect; Write right required; see previous table
Additionally, all features granted without any right (next table) are available as well.
Page 75
Accessible via
Chapter
Functions bar
6.8.2
Functions bar
6.8.4
Note: The common features Tree, Help, and Info are available irrespective of any
right.
5.4.3
Roles can be assigned to users in the 'Edit User' menu of the Account Manager.
A role is a profile with defined access rights. By default three roles are pre-defined:
5.4.3.1
The administrator role is a pre-defined profile. These users have full read and write
access rights to the database. Only users with the "Administrator Role" assigned are
allowed to start the Sever Configuration (see chapter 5.1).
5.4.3.2
The standard user is a pre-defined user with read rights and the rights to control the
alarm system and the device parameters.
5.4.3.3
The read only user is a predefined user with read access rights only.
Page 76
M0125ANA.DOC
5 A.I.M.O.S. Configuration
5.4.4
For a description of the SNMPv3-specific fields (as listed in section 5.1.4.9) refer to
the AIMOS SNMPv3 Configuration Guide provided for customers using this feature
(location see section 2.5.5).
Page 77
Page 78
M0125ANA.DOC
5 A.I.M.O.S. Configuration
5.4.5
NE Owner
These settings must be saved and then the new 'NE Owner' can also be selected in
the Configuration / General tab (see chapter 6.8.2).
In Tools/Northbound Manager specify to which destination (IP address) the alarms of
an individual NE (or NE owner) should be sent (see chapter 5.5.3).
5.4.6
Import / Export
Excel Export
Use the (Excel-)Export button of the Account Manger in order to save all user data
as an Excel file. This button can be made available to all users and is not connected
to the Export feature of the Account menu described in the previous chapter.
Page 80
M0125ANA.DOC
5 A.I.M.O.S. Configuration
SNMP Manager
Menu / Buttons
Insert a new SNMP Manager.
Edit the selected SNMP Manager ( see section 5.5.3)
Delete the selected SNMP Manager.
Test-Trap
Send a Test-Trap to test the connection to the SNMP Managers.
Columns: Double-clicking on a field will open the Edit SNMP Manager window for
the selected SNMP Manger.
ID
This column contains an internal unique identifier of each SNMP Manager. Its values
are set by the program.
IP Address
This column holds the IP Address of the SNMP Managers which is to receive SNMP
Alarm Traps. If the SNMP Manager does not expect to receive SNMP Traps at the
'Default Port for Outgoing SNMP Traps' specified by the A.I.M.O.S. Configuration
Tool (see chapters 5.1 & 5.1.4.2), another specific IP port number may be specified
by appending a colon and the IP port number (e.g. 192.168.0.1:164).
Page 81
OMC3Nokia alarm forwarding as used in OMC V3.54 with the Nokia interface.
The alarms sent away are always SNMPv1 traps.
NE3S alarm forwarding as defined in the Nokia Enhanced SNMP Solution Suite
(NE3S). The decision made by means of the setting 'Alarm Forwarding' within
the Account Manager determines whether an alarm is sent away as SNMPv1
trap or as SNMPv2 notification.
Page 82
M0125ANA.DOC
5 A.I.M.O.S. Configuration
Time Display Format
This column is used in order to indicate of how date and time values are encoded
and transmitted by the A.I.M.O.S. SNMP Agent in traps/notifications. The MIB
SNMPv2-TC defines the textual convention DateAndTime, which serves as basis for
the formats offered in A.I.M.O.S.
It is defined as follows: A date-time specification.
Field
1
2
3
4
5
6
7
8
9
10
Octets
1-2
3
4
5
6
7
8
9
10
11
Contents
year
month
day
hour
minutes
seconds; (use 60 for leap-second)
deci-seconds
direction from UTC
hours from UTC
minutes from UTC
Range
0..65536
1..12
1..31
0..23
0..59
0..60
0..9
'+' / '-'
0..11
0..59
For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as:
1992-5-26,13:30:15.0,-4:0.
If only local time is known, time zone information (fields 8-10) is not present.
In general, A.I.M.O.S. provides three date and time formats:
1. SNMP:
This format uses the Textual Convention DateAndTime mentioned above.
2. OSI:
This format is identical to the previous one except
- the deci-seconds are omitted and
- if no time zone information is present (i.e. the UTC Time Format is used),
the direction from UTC contains the character 'Z' and the subsequent values are not
used.
3. Windows:
Date and time values are formatted as defined in the windows country settings.
The short date format and the long time format, separated by a blank, is used.
Both, the OSI and the SNMP Format, may be transmitted in three ways:
1. Binary
The values are encoded as defined in the MIB. Thus, the year needs two octets
(bytes), the month one... This format requires the smallest amount of memory.
2. Text
If a SNMP Management System has difficulties to decode the date and time values,
we offer an ASCII format. Each digit will use one octet (byte).
3. Formatted
This format is the same like text appended by formatting characters like minus,
comma and colon.
Page 83
Page 84
M0125ANA.DOC
5 A.I.M.O.S. Configuration
5.5.2
Workshift Assignment
A.I.M.O.S. is shipped with one default workshift. If you want to use the workshift
facility, you should add at least one additional workshift.
This will be done by selecting Workshift Insert
from the menu. In the following window you have
to assign a name. If you want to have the
heartbeat feature enabled, you have to specify the
interval in minutes here.
Insert a new Workshift.
Activate a Workshift.
Edit the selected Workshift.
Delete the selected Workshift.
After that you may want to change the name of the default workshift (Menu Workshift,
Edit, Default Workshift) and the heartbeat interval as well.
Please note: An active workshift cannot be deleted.
In order to specify the recipient of traps in dependence of the time, proceed as
follows:
Page 85
NE Owner
Use
the
Edit
button to specify to
which destination
(IP address) the
alarms
of
an
individual NE or
NE Owner should
be sent (for more
information on NE
Owners
see
chapter 5.4.5).
For a description of the SNMPv3-specific fields (as listed in section 5.1.4.9) which are
not shown in the screen shot above refer to the AIMOS SNMPv3 Configuration
Guide provided for customers using this feature (location see section 2.5.5).
Page 86
M0125ANA.DOC
5 A.I.M.O.S. Configuration
Step 1: Select the NE which shall be included in the alarm polling in the NE Tree.
In the example below a Node A is selected.
Step 3: In the Settings section set the check-mark for Include in Alarm Polling
to configure alarm polling for this NE:
(The parameter Alarming Enabled is not relevant for Alarm Polling; for details about this
parameter see chapter 6.2.3 Tree.)
Step 5: To activate Alarm Polling either move to OMC level and set the check
mark for 'Alarm Polling Active' or activate it in the Preferences Editor
where the settings can additionally be customized (see chapter 5.2).
Note: On NE level, the parameter 'Alarm Polling Active' cannot be changed. It
shows whether alarm polling has already been activated. If it is not yet tagged,
activate Alarm Polling on OMC level or in the Preferences Editor. Either way
Alarm Polling activation is effective for all NEs scheduled for alarm polling.
Page 87
Click the Save button to save the entry in the A.I.M.O.S. database and button 'Try
connection' for test purpose. Click Next.
Click Get to import the unique identifier for the OMC 3.54. Click Next.
Click Get to import the complete topology maintained by the Andrew OMC 3.54. Click
Close to finish the wizard.
The optional OMC3 Adapter service integrates an OMC 3.54 for 1st and 2nd
generation repeaters into A.I.M.O.S. The customization for this tool has to be made
within the 'Server Configuration' tool (Start - Programs - Andrew A.I.M.O.S. - Server
Configuration). For details see chapter 5.1.5 and the online help of the A.I.M.O.S.
Server Configuration / Configuration Tool (chapter 5.1).
Page 88
M0125ANA.DOC
5 A.I.M.O.S. Configuration
The installation and use of the automatic backup feature is described in a separate
manual (M0125B6), which is contained in the 'Manual' folder of the A.I.M.O.S.
Installation CD-ROM.
5.10
Page 89
Page 90
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6 A.I.M.O.S. - OPERATIONS
6.1 NE MANAGEMENT - OVERVIEW
Page 91
IP address
database
User
name
License
information
Progress Shows
active
or Skin / Selected
bar
inactive CAPS, NUM, appearance
SCROLL, INSERT
Alarm Status
The Alarm Status gives an overview of the alarms of the selected level/network
element.
6.2 MENUS
This chapter provides a short summary of each main menu. The available menu
items / submenus depend on the NE selected in the NE Tree as well as on the tab
selected in the Functions Bar. For the following examples an ION MC with tab
Supervision was selected; if another type of NE or another tab is selected, less menu
items / submenus may be available. This chapter only describes those submenus in
detail which are not explained further in later section of the manual.
The icons to the right of the menu bar provide shortcuts to the submenus of the Tools
menu (see section 6.2.2).
Page 92
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.2.1
File
Excel-Export: Depending on the tab selected in the Functions Bar (see chapter 6.8)
the according data can be saved as Excel file. This is also possible via the Excel
Export button of the according tab.
Access can be configured in the Account Manager (chapter 5.4.2).
Export NE Data to XML-Import File: Select to export NE data (of all NEs in
A.I.M.O.S. except OMC3) from the A.I.M.O.S. database into a re-importable xml file.
Please note: It is possible that coded passwords might be exported, as well. Thus,
the generated file should be protected, i.e. it should not be freely available. Although
the actual password text is not exported, the information provided could be used to
create, change, or take over the units.
After entering the desired filename in the Save to XML file window. such a file can
be used for xml file import with the Tool Scheduler (Option); see chapter 6.10.2.
Page 93
Page 94
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.2.2
Tools
Tool
Preferences Editor
Connectivity Manager
Scheduler (option)
Account Manager
Northbound Manager (option)
Network Element List
Log Manager
Job Monitor
Map (option)
WatchDog
Performance Manager
Profiles
see chapter
5.2
5.3
6.10
5.4
5.5
6.11
6.13
6.12
6.14
6.15
6.16
6.17
The OMC 3 menu, by which the OMC 3 is started, is only available with OMC 3
installed. For details see OMC 3 manual. Please observe that access to the OMC 3
tool can be configured in the Account Manager rights (chapter 5.4.2).
6.2.3
Tree
Note: Access to the actions New, Rename, Move,
and Delete can be configured in the Account Manager
(chapter 6.4.2).
Network Element Operations: For details refer to
chapter 6.7.
New: Depending on the desired action refer to chapter
6.6 Add New Folder, 5.7 Integration of OMC 3.54, or 6.5
Add New Network Element (NE) for a more detailed
description.
Alarming History: Opens the Alarm History window for the selected NE.
Alarming Enabled: If this option is not tagged, alarms sent by the selected NE will
not be visualized by A.I.M.O.S. (i.e. the check-mark should only be removed under
special circumstances, e. g. for tests, maintenance of the NE, etc.). To show that
alarming has been disabled a Stop sign will be displayed beside the respective NE
in the NE Tree (see section 6.3).
Logging Enabled: If this option is tagged, a window logging the current jobs for the
selected NE is displayed. When this NE log window is closed, the check-mark is
removed as well.
Expand / Collapse: Saves the same purpose as clicking + or - in the NE Tree.
Refresh: Although A.I.M.O.S. updates the screen contents automatically, you can
use Refresh/F5 as reinsurance that the screen shows the current status.
Actions relating to Map: The actions Locate in Map, Assign Map to Folder, Show
Map, and Delete Map from Folder are only available when tool Map is licensed (see
chapter 6.14) and the according right was granted in the Account Manager (see
chapter 5.4.2). Depending on the selected unit, different commands are possible. For
details please also see chapter 6.14.
Page 96
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.2.4
View
Locate NE: Serves the same purpose as the button
Locate (under tab Supervision; see chapter 6.8.1),
which shows the alarming NE in NE Tree.
Show JobStatus: Shows the current status of the job
in process.
Standard View: = normal view.
NSO View: Special view for NSOG or NSOU.
Alarm Text in Extra Line: If tagged, alarms are displayed in two lines (as shown in
chapter 6.8.1); otherwise all information is displayed in one line:
Alarm History: Opens the Alarm History window for the selected NE.
Specific Problem Values for Nokia: Replaces the numbers by special ones for N.
HID's from Sub-Network Elements: Shows the HIDs of subordinate NEs, as well.
Max. Log Rows to Load: Limits the protocol.
Show All: Select this option to display all available information including the
A.I.M.O.S.-internal data, which are not shown otherwise.
Load Grid Layout:
Save Grid Layout:
Delete Grid Layout:
Page 97
6.2.5
Extras
Page 98
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.2.6
Window
All applications of A.I.M.O.S. are listed. With one mouse-click the tools can be
brought to the front.
Tool Windows: A list of all Visualization tools that are active in the background is
displayed (in the example above only the tool Network Element List is active). Click
on a tool in the list to access the respective tool window.
Close all Tool Windows: All tool windows from the list shown above will be closed.
6.2.7
Menu ?
Help: Opens the Welcome page of the online help
Alarm Help: Opens the Alarm Help for the selected
alarm.
Suggest a Feature: Users can use this item to suggest
new features for A.I.M.O.S. by sending an according
mail.
When the
button is
clicked, first, the database
version is displayed and,
upon a second click on the
button, the update history
of the database, as well as
the installed data base
patches.
A third click provides further information on the corresponding A.I.M.O.S. version.
Page 99
6.3 NE TREE
The NE Tree is the control interface for the navigation through the complete network
managed by the program.
All properties of the selected component are logically sorted by the Functions and
displayed in the Management Interface.
After the installation, A.I.M.O.S. only contains the OMC database symbol in the NE
Tree. The OMC (database) is the highest level of the hierarchical structure of the
management and maintenance system.
In this level the overall functionality of A.I.M.O.S. is combined. Select the OMC in the
NE Tree. The Functions bar will show the tabs, the MANAGEMENT INTERFACE will
display the fields available at this level of the managed system.
Page 100
M0125ANA.DOC
6 A.I.M.O.S. - Operations
Note: From SW version V2.9.1 onwards the acronym SRMU (Subrack Master Unit),
i.e. the optical transceiver in an ION-M system, will be replaced by the current
designation MU OTRx (Master Unit Optical Transceiver) in the NE Tree.
Please observe that in other parts of A.I.M.O.S. the former designation SRMU
may still be used.
To create new network elements, new folders or to add OMC3, use the context
menu items 'New...' (right-mouse click) or menu Tree - New....
Page 101
Description:
Off Duty *
Shut Down *
NE is 'out of service'.
Alarming Disabled
Planned
The NE has been created already but the full information set
from the NE has not been received by the A.I.M.O.S.
database yet.
* These suspended periods are currently only supported for the Node AM (see also Heartbeat
description of Configuration tab, section 6.8.2).
Page 102
M0125ANA.DOC
6 A.I.M.O.S. - Operations
Table Filters
Each table can be filtered by filter options depending on the type of table (e. g. alarm
list) and the data available. The examples in the following descriptions are taken from
the alarm list (as the most commonly used table); please observe that since the table
filters are context-sensitive available options may differ in other tables.
Note: All filters and sort options are applied on a "per-user" basis.
6.4.1.1
.
.
Page 103
6.4.1.2
Note: The settings for the sort options and calculations can
be saved via the menu View (see chapter 6.2.4).
6.4.1.3
Use the menu View to save, load and delete customized filter and sort settings for
tables in a grid layout.
Load Grid Layout: Use to load a
(formerly saved) column arrangement.
Select Reset to Default to set the grid
layout back to factory settings.
Save Grid Layout: Use to save the
current column arrangement.
Delete Grid Layout: Use to delete a
(formerly saved) column arrangement.
Page 104
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.4.2
A filter can consist of several groups of conditions. Conditions are the defined criteria
for the selection.
6.4.3
The NE filter is situated on the top of the NE Tree. Five pre-set filters are available.
Additionally, the NE Filter Builder can be used to create a customized view (
Custom Filter). Please note that a filter does not affect the visualization of the alarms
(i.e. all alarms will be displayed and not only those of NEs included by the selected
filter).
Click
to open the NE Filter Builder and create a customized filter (see following
Click
chapter 6.4.3.1). This customized filter will be added to the end of the list box.
Please note that only one list entry Custom Filter is available in the list box. In case
of changes of the Custom Filter its former settings will be overwritten. Move the
mouse pointer over the list entry Custom Filter to get a description of it.
Page 105
6.4.3.1
Note: Once entries have been made in the individual fields (for details see chapter
6.4.3.2 Filter Settings), the buttons OK and Cancel will also be available and the
buttons Apply and Undo will become active.
Click
Arrow to list all available filters. Scroll through the list to select a filter.
Click
Page 106
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.4.3.2
Filter Settings
Note: If no choice is made in one or more of these fields, no filter is set for the
respective characteristic.
... except those...: Select except those to show in the NE Tree all network elements
which do not match the filter builder definition.
...located beneath: Reflects the NE Tree. Select the folder.
...of Type: Select the type of NE.
...and Sub Type: If there are sub types available, the list box is active. A selection of
several sub types is possible.
...running SW VerNo: If type is selected, choose VerNo from list or make an
individual entry.
...owned by: Select the owner.
...in Configuration Group: Select the NE Configuration Group. A Configuration
Group profile can be created via the Connectivity Manager (see chapter 5.3.3) or via
menu Tools Profiles (see chapter 6.17.3).
...connected via: Select the connection type.
...with NE Status: Select from the list provided (see NE Filter Builder window on
previous page) to filter network elements of the according NE status.
...having active Alarms: Select Any, Yes or No to filter NEs having active alarms or
not.
...having disabled Alarms: Select Any, Yes or No to filter NEs having disabled
alarms or not.
...having received event: Make a selection (one or more is possible) to filter NEs
having received the selected event(s). For details about these events see chapter
6.10.3.1 Event Triggered Actions.
6.4.3.3
To import a filter created with the tool Scheduler (as described in chapter 6.10 Tool
Scheduler (Option), section 6.10.1.2 Step 2: Tab Network Elements - Customize the
Network Elements), proceed as follows:
After a right-mouse click on Custom Filter select Assign from Schedule and a list
of available schedule filters is displayed. Choose the desired filter but please observe
that if a Custom Filter has already been stored, its settings will be overwritten and
cannot be retrieved afterwards.
Page 107
6.4.3.4
As default, filters are created as dynamic filters, i.e. the chosen filter will always
evaluate the current state according to the given criteria and adapt the selection / NE
Tree accordingly.
It is, however, possible to convert a dynamic filter into a static filter, which will always
show the selection that was made when it was last stored. To do so, use the Convert
into Static Filter button in the NE Filter Builder window (or in the Schedule Wizard).
Alternatively, it is also possible to do a right-mouse click in the NE Filter Builder
window (or in the Schedule Wizard) and select Convert into Static Filter.
Confirm your selection and the filter will be changed accordingly. When it is selected
again, it will always show the tagged NEs only.
Note: Please observe that this change is irreversible, i.e. turning this filter back into a
dynamic one is not possible. A right-mouse click in the static Filter Builder/Schedule
Wizard will prompt the selection Create Dynamic Filter from Scratch to access the
dynamic Filter Builder/Schedule Wizard, where all filter settings have to be entered
anew.
Page 108
M0125ANA.DOC
6 A.I.M.O.S. - Operations
right-mouse click the database level or folder in the NE Tree, select menu
New / Any New Network Element
or
-
Node X
6.5.1.1
The Node X i.e. Node C, Node G, Node M, or Node A ( choose this type also for
a Node A+ or a Node AM) is the highest management and supervision level of a
Node X system. When a Node X system is initialized to A.I.M.O.S., its complete
structure is queried and transmitted to the A.I.M.O.S. database.
When the corresponding Node X entry from the list has been selected and confirmed
(click Next), the New Node X' wizard starts (the Use SNMPv3 parameter is
available for Node A only):
Page 109
The parameters required in the following screens depend on the Network Connection
Type selected. In the screens displayed the type Circuit Switched is chosen.
6.5.1.2
Page 110
M0125ANA.DOC
6 A.I.M.O.S. - Operations
B: No Change was chosen as Uplink Connection Parameter:
Enter telephone number and PPP login
data (RAS-modem connection) or the
A.I.M.O.S. IP address (LAN connection)
of the A.I.M.O.S. server.
Click Save to make the entry to the
database.
If the test connection is successfully finished (as shown in the illustration above),
click Next to proceed.
(If the test connection fails, check the hardware, e g. cable, network adapter, etc., the
software / RAS connection, and the IP parameters for the connection.)
Enter Component Name
and Trap Info and select
an NE Owner from the
list provided.
(These data can be
displayed in the NE Tree
via the context menu
Field Chooser.)
Click Get to import the
unique identifier of the
Node system.
Page 111
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.5.2
AMR
Select the New AMR entry from the list and click Next.
The 'New AMR' wizard starts:
Page 113
6.5.3
MCPA
Select the OneBase MCPA CellExtender entry from the list and click Next.
The 'New OneBase MCPA ' wizard starts:
Page 114
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.5.4
Select the Legacy ION-B Optical System entry from the list and click Next.
Note: Observe that ION-B systems with a TSUN4 controller must be created as an
ION-M Optical System element as explained in chapter 6.5.6.
The Legacy ION-B Optical System level is the highest management and
supervision level of an ION-B system. When it is initialized to A.I.M.O.S., its complete
structure is queried and transmitted to the A.I.M.O.S. database.
The 'New Legacy ION-B ' wizard starts.
Enter the Basic Parameters of the new Legacy ION-B Optical System:
IP-Address / Port: Enter the IP address and IP port of the new ION-B system.
Network Connection Type: Select the network connection type to be used for
connections to this ION-B (only available types are suggested). If the communication
group for a connection via modem (RAS outgoing) is selected, click Next and enter
the telephone number and PPP login data for the ION-B system.
Modem Group: Select from the list box. The modem groups are predefined in the
tool 'Connectivity Manager' with the function 'Modem Group'.
Click Save to make the entry in the database and Next to proceed.
It is recommended to click 'Try connection' to setup a test connection.
If the test connection fails, check the hardware (cable, network adapter,...), the
software (RAS connection) and the IP parameters for the connection.
Click 'Next>>>'.
Click Get to import the unique identifier of the ION-B system.
Click Get to import the complete structure of the ION-B system. This will request the
current topology of the ION-B system with all components. The answer to this
request is evaluated and entries are made to the database for all system
components.
Page 115
Page 116
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.5.5
Note: Please observe that currently for these systems only alarming is available.
Thus, no configuration is possible yet.
Select the ION-U System / ION-E System entry from the list and click Next.
The 'New ION-U System' / 'New ION-E System' wizard starts (as the wizard setup is
the same for both systems only the screen for ION-U is shown here):
Page 117
6.5.6
Page 118
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.5.7
MRx18
DICE
MIR-T
ION-M MiniMaster
Generic
Generic1
Generic2
MR2003P
MR2133
Note: The required entries vary depending on the type of SMS-connected NE.
Page 119
MRx18
Select the 'MRx18' entry if the device is a member of the MRx18 family
(miniRepeater family) and capable of the SMS feature.
DICE
Select the 'DICE' entry if the device is a member of the DICE family (miniRepeater)
and capable of the SMS feature.
The default port configuration
is as follows:
Page 120
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.5.7.3
MIR-T
Select the 'MIR-T' entry if the device is a member of the MIR-T family and capable of
the SMS feature.
The default port configuration
is as follows:
ION-M MiniMaster
Select the 'ION-M MiniMaster' entry if the device is an ION-M MiniMaster and
capable of the SMS feature.
6.5.7.5
Generic
Select the 'Generic' entry if the device is no member of the other repeater families
and capable of the SMS feature.
The default port configuration
is as follows:
Page 121
6.5.7.6
Generic 1
Select the 'Generic1' entry if the device is no member of the other repeater families
and capable of the SMS feature.
The default port configuration
is as follows:
Generic 2
Select the 'Generic2' entry if the device is no member of the other repeater families
and capable of the SMS feature.
The default port configuration
is as follows:
6.5.7.8
MR2003P
Select the 'MR2003P' entry if the device is an MR2003P and capable of the SMS
feature.
The default port configuration
is as follows:
6.5.7.9
MR2133
Select the 'MR2133' entry if the device is an MR2133 and capable of the SMS
feature.
The default port configuration
is as follows:
Page 122
M0125ANA.DOC
6 A.I.M.O.S. - Operations
The example above shows the NE Operations menu of a Node AM but the following
survey lists all operations that are available. When an operation is chosen, it will be
carried out for the selected NE.
Please observe that access to some of the operations may also depend on the
Account Manager rights (for details see chapter 5.4.2).
Finish Installation: This operation is only available if an NE has not yet been set up
completely. In such a case use it to finish the setup.
Try connection: Use to test the connection to the NE. Performing this operation is
recommended after the installation is finished.
Read Unique System ID...: Use to get the system-specific ID.
Read Network Structure: Available in systems with NE subunits to read the
complete network topology into A.I.M.O.S., e. g. after changes in the system
topology. 1)
Query Alarms: Use to read all current alarms of the NE into A.I.M.O.S. 2)
Query All: This operation opens a submenu with further actions that can be
performed. All are listed but only those available for the selected NE are active
(tagged).
Page 123
Node G /
Node M /
Node C /
Node A
ION-M
Get RepeaterType
Get Segment
Get ALSEV
Get H-Beat
Get RSSI
Get RF Status
Get CI
Get SW-Version
Get SMSC
MRx18
Get Config
Read HIDs: Use to read HID information into A.I.M.O.S.; this operation should be
done after changes of the HW. 3)
Set Time: Use to set the time and date for the NE. The submenu also offers a Get
command to see the current settings.
Reboot: Use to reboot the NE.
Get GPS Position: Use to determine the coordinates of the NE (Node AM only),
which will be displayed in the Configuration window (see chapter 6.8.2).
Send Configuration: Use to initialize SMS connection for NE.
Set Factory Default: Use to set NE back to factory-set default values.
Get Service Center Number: Use to retrieve the Service Center Number of an
SMS-connected NE.
Page 124
M0125ANA.DOC
6 A.I.M.O.S. - Operations
Send Service Center Number: Use to send the Service Center Number of an SMSconnected NE.
Delete Pending Configuration Data: This operation overwrites planned settings
with current settings to get rid of [legacy]* planned settings.
* or [outdated]
Backup: Use to store the configuration data of the NE into the database. The
following operations will be performed (automation via Tool Scheduler (Option) is
possible; see chapter 6.10.3):
Alarm Severities
Started
Get HW/RF
Query Connectivity
User Texts
The tabs are sorted in a hierarchical way: The upper tabs are determined by the NE
selected in the NE Tree. The example shows the upper tab 'Configuration', which
holds the lower tab 'User'. Depending on the size of the window not all tabs available
might be displayed right away; use the arrow buttons to scroll to the left or right.
Note: Depending on the type of NE and its supported features, the tabs vary.
The upper tabs can be: Supervision
Notes
Configuration
Log
Maintenance
Page 125
6.8.1
Supervision
Tab Supervision lists all alarms for the selected NE. Depending on the selection in
the NE Tree, all alarms of the NE, the complete system, or the complete network are
displayed.
Alarms can be recognized, manually cleared or deleted via the button Recognize
(see also chapter 6.2.5 Extras).
Access to the actions Manual Clear, Manual Delete,
Recognize, and Recognize all can be configured in the
Account Manager (chapter 5.4.2).
Alarm Help opens the Alarm Help for the selected alarm.
The button Locate shows the alarming NE in the NE Tree.
The button Excel Export allows saving the alarm list (of the
selected NE, folder, or the complete network) in an Excel
compatible file format. Access can be configured in the
Account Manager (chapter 6.4.2).
Customize the design of the alarm list in Configuration / Alarm Settings.
The displayed columns depend on the selection made in the table filter as explained
in chapter 6.4.1.1.
Please observe for Network Elements with GPS function that the columns Latitude
and Longitude (scroll to end of list as explained in chapter 6.4.1.1) must be selected
to show the GPS position of an NE at the time of an alarm since these columns are
not part of the default selection. In case of an alarm of an NE with GPS coordinates
the context menu GPS Position is available by a right-mouse click on the alarm. The
coordinates can be copied to the Windows clipboard or to Google Maps to display
the NE in a map:
Coordinates of the last known
NE position.
Page 126
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.8.1.1
Alarm History
Click Alarm History to show the last 5.000 alarms. The number of listed alarms can
be edited with Alarm History Initial Size Limit in Account / Button Organizations.
Access to the actions Select All and Manual Delete can be configured in the
Account Manager (chapter 5.4.2).
6.8.1.2
Alarm Help
Select an alarm and click Recognize - Show Alarm Help or press button F1 to view
further information on the alarm.
The context-sensitive Troubleshooting help appears.
Page 127
6.8.2
Configuration
Please observe that access to this tab can be configured in the Account Manager
(see chapter 5.4.2).
Note: Only the supported features of the selected NE can be customized within
the respective tab.
Changes in the A.I.M.O.S. database can be made in the white fields of the left row.
Depending on the tab, changes to the NE settings can either be made by clicking the
Edit NE button or using the checkbox
M0125ANA.DOC
6 A.I.M.O.S. - Operations
2) Connectivity
All data for the connection to and from the NE are displayed here. Contents of the
Connectivity page vary depending on the type of connection supported by the NE.
For further information refer to chapter 6.9 Configuration - Connectivity.
3) Heartbeat
Heartbeat status and configuration are displayed and can be changed. The heartbeat
is a kind of "I am alive" message of the NEs sent by the individual NE via the same
communications channel as the alarms. Its purpose (when activated) is to guarantee
that an NE is 'in operation' and able to send out alarms (communications channel for
alarms from NE to A.I.M.O.S. is functioning) if required.
HeartBeat Status displays
the Next Expected and Last
Received heartbeats of an
NE.
HeartBeat Config displays
the heartbeat configuration
settings of the respective NE.
The
HeartBeat
Resume
Config is only displayed for
NEs supporting this feature
(e.g. Node AM). For more
details see * notice on next
page.
Upon clicking the Edit NE button, the following features can be configured:
Page 129
For the User Manager two settings are available: A.I.M.O.S. or NE. If it is set to
A.I.M.O.S., the A.I.M.O.S. password requirements as specified in section 5.1.3.1
Password Settings will be valid for setting the User Passwords below; with setting NE
the requirements are determined by the SW of the corresponding NE. For details on
these, check the SW manual of the NE.
Page 130
M0125ANA.DOC
6 A.I.M.O.S. - Operations
For NEs of the Node AM type, the Password Duration in Days for a User can be set
from 1 999 days when the corresponding check mark is set. When no setting is
made for this parameter, the password does not expire:
Page 131
5) HW/RF
In this section hardware settings are listed. For details on NE specific hardware
settings please read the manual of the respective NE.
For a Node G the following tabs are available:
Please observe that after performing 'Show Set Values' in tab 'Cell Allocation' or
'Mobile Allocation' a context-sensitive menu can be accessed by a right-mouse click.
In case of a Node G with Frequency Shifting the following tabs are available:
With the button 'Sync NE' the current data of the NE are queried and the display is
updated accordingly.
The tab System Configuration provides the additional selection Enable GPSBased Configuration (under Network Element Settings) if the NE supports this
feature:
6) External I/Os
This section lists the settings for configurable external alarms.
Page 132
M0125ANA.DOC
6 A.I.M.O.S. - Operations
7) Alarm Settings
On the OMC level the tab Alarm Severities is available in order to set the severities
of alarms generated by A.I.M.O.S.:
In the tab Clear Modes set whether recognized alarms (either manually or using the
Auto-Recognize feature) should be cleared automatically upon recognition.
The following settings are available for other NEs:
Note: To save settings, always click the
button.
In order to set the severities of alarms generated by the selected NE, the tab Alarm
Severities is available:
Page 133
The Actual Severity and Actual Latency (time an alarm must be active before it is
informed to A.I.M.O.S.) are displayed:
Tag Show Set Values to display the Planned Severity and Planned Latency
columns where the severity and latency settings can be changed.
Available severity levels are: critical, major, minor, warning, disabled, and (if
supported by the selected NE) information The alarm latency can be set at predefined intervals in a range from 0 to 60 minutes.
Alarm Thresholds:
For all NEs supporting the feature (i.e. Node type network elements), this additional
tab is available (for details see SW manual of the corresponding Node).
Page 134
M0125ANA.DOC
6 A.I.M.O.S. - Operations
8) Web
Use this tab to access the web interface of the selected NE. If certain criteria are
fulfilled for the corresponding NE (for details see chapter 5.3.3.5), a Login button is
provided by which username and password will be entered automatically to the login
page to go directly to the home page of the NE. Otherwise, login data will have to be
entered manually.
If HTTPS is chosen as WEB Server Configuration in the Connectivity page (see
section 6.9.5.5), a certificate installation is required before the first access and the
system will prompt an according Security Alert. The detailed procedure is explained
in chapter 14.
Note: A change of settings made in the web interface is saved to the NE only. The
database of A.I.M.O.S. is not updated automatically. To synchronize the database of
A.I.M.O.S., use either the Event Triggered Actions of the Tool Scheduler (Option)
(see section 6.10.3.1) or the NE operation Query All (see chapter 6.7). If important
settings for the A.I.M.O.S. connection are changed (e.g. connectivity mode, IP
address, username, or password), make sure to adjust these in the Connectivity
page of A.I.M.O.S. (see section 6.9 Configuration - Connectivity), as well.
For refreshing the screen display, a Refresh button is available.
9) NE Image
Use this tab to insert an image of your choice for the NE.:
Click the Load from File button and browse to the location where your image is filed:
6.8.3
Maintenance
Please observe that access to this tab can be configured in the Account Manager
(see chapter 5.4.2).
Note: Only the supported features of the selected NE can be customized within
the respective tab.
The tabs can be:
Backup/Restore
This tab serves to make a backup of all settings within the NE (automation via Tool
Scheduler (Option) is possible; see chapter 6.10.3). If changes made to the NE seem
to be incorrect, a previous stage of all settings can be restored in the NE.
Use the Excel Export button to save a survey of available backups as Excel file.
The Export to File button saves the data in zip file format (see also chapter 6.2.1).
Use this function also to copy the configuration of an NE to a new repeater with the
same software and hardware versions.
Revision Info
This section contains a listing of hardware and software information.
Inventory Data
This section is a listing of all components with the Hardware Inventory Data.
B) HIDs valid between shows the HW installed on site in a specific time frame that
can be set as desired.
C) HIDs changed between shows all changes (e.g. added or removed) in a specific
time frame that can be set as desired.
The following examples explain the information given in the individual columns of the
Maintenance table.
Page 136
M0125ANA.DOC
6 A.I.M.O.S. - Operations
Example 1: A new device (identified by ID Number & Serial Number) has been added
Example 2: An existing device (identified by ID Number & Serial Number) has been
removed
Example
1&2
1
Column
Reported
Reported State
Outdated
Outdated State
Outdated
Entry
date/time
new/added
no entry
no entry
date/time
Outdated State
removed
Explanation
date/time the device has been added
device is not outdated
date/time the device has
removed
device has been removed
been
Example 3: A device (identified by ID Number & Serial Number) has been changed
two times (e.g. new SW versions)
Example 4: A device (identified by ID Number & Serial Number) has been changed
(e.g. new SW version) and removed afterwards
Example
3&4
Column
Reported
Reported State
Outdated
Outdated State
Reported
Reported State
Outdated
Outdated State
Reported
Reported State
Outdated
Outdated State
Reported
Reported State
Outdated
Outdated State
Entry
Explanation
Legacy data (line 1)
date/time
date/time the device has been added
new/added
date/time the device has become
date/time
obsolete (the 1st time)
obsolete
Legacy data (line 2)
date/time the device has been
date/time
changed the 1st time
changed
date/time
date/time the device has become
obsolete the 2nd time
obsolete
New data (line 3)
date/time the device has been
date/time
changed the 2nd time
changed
no entry
device is not outdated
no entry
New data (line 2)
date/time
date/time the device has been
changed
changed
date/time
date/time the device has been
removed
removed
Page 137
6.8.4
Notes
Notes can be attached for each separate NE (see also Add a note in chapter 6.2.3
Tree). These notes can be saved as Excel file with the Excel Export button.
6.8.5
Log
The feature Log is only displayed when Show Visu Log is tagged in the Preferences
Editor (see chapter 5.2). It shows the internal debug logs that are generated by the
A.I.M.O.S. Connector service for the respective NE.
These logs can be saved as Excel file with the Excel Export button.
Please observe that access to this tab can also be configured in the Account
Manager (see chapter 5.4.2).
Page 138
M0125ANA.DOC
6 A.I.M.O.S. - Operations
For NEs supporting VPN, additional parameters are provided (see chapter 6.9.6).
For NEs supporting SNMPv3 the
corresponding parameter is available in
the Common Connectivitiy section:
The following NE-related data may be
available in the Network Element
section irrespective of the communication
type selected. Their availability only
depends on the NE type and settings (for
explanations see chapter 6.9.5):
6.9.1
Circuit Switched Connection
The example shows the circuit connectivity settings of a Node.
Note:
Check in Tools / Connection
Manager whether the needed
Modem Groups and RAS-in
Profiles are created. If they are
not, create them.
Buttons: see chapter 6.9.5.1.
Common Connectivity
Connectivity Mode: Displays the
connectivity mode for connecting
this NE.
A.I.M.O.S. (= A.I.M.O.S. related
settings)
Dial-Out Modem Group:
Select modem group from list.
OMC IP Address:
A.I.M.O.S. IP Address.
OMC IP Port: A.I.M.O.S. IP Port.
Dial-In Configuration:
A.I.M.O.S. RAS-in profile.
Network Element: NE related settings. Only available settings are displayed. If the
network connection is set to RAS, the CS IP address and port are used by A.I.M.O.S.
CS IP Address / IP Port: IP address and IP port of an NE connected via circuit
switched connection.
Dial-In Configuration: NE profile.
CS Phone Number: NE phone number (data call).
Packet Switched Settings (Fallback): Select the PS profile.
WEB-Login Configuration: see chapter 6.9.5.2.
Alarm Type: see chapter 6.9.5.3.
Inform Timeout: see chapter 6.9.5.3.
Inform Retries: see chapter 6.9.5.3.
Zone Change Traps: see chapter 6.9.5.4.
WEB Server Configuration: see chapter 6.9.5.5.
Additional Information: see chapter 6.9.5.6.
Page 139
6.9.2
6.9.2.1
Overview
Note: Check in Tools / Connection Manager whether the needed PS Profiles are
created. If they are not, create them.
Buttons: see chapter 6.9.5.1.
Common Connectivity
Connectivity Mode: Displays the connectivity mode for connecting this NE.
A.I.M.O.S. A.I.M.O.S. related settings.
OMC IP Address: A.I.M.O.S. IP address.
OMC IP Port: A.I.M.O.S. IP port.
Network Element: NE related settings. Only available settings are displayed.
PS IP Address / IP Port: IP address and IP port of an NE connected via packet
switched connection.
Packet Switched Settings: NE packet switched profile.
WEB-Login Configuration: see chapter 6.9.5.2.
Alarm Type: see chapter 6.9.5.3.
Inform Timeout: see chapter 6.9.5.3.
Inform Retries: see chapter 6.9.5.3.
Zone Change Traps: see chapter 6.9.5.4.
WEB Server Configuration: see chapter 6.9.5.5.
Additional Information: see chapter 6.9.5.6.
Page 140
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.9.2.2
To change to the connectivity mode 'Packet Switched Always On' proceed as shown
in this example:
Page 141
6.9.3
6.9.3.1
Overview
NE establishes a packet
switched connection only
when a message needs to
be sent. This example
connectivity
shows
settings of a Node.
Note: Check in Tools /
Connection
Manager
whether the needed PS
Profile, the SMS Modem
Groups and the SMS
Profile are created. If not
create them.
Page 142
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.9.3.2
Step 6: Select the SMS Profile in SMS Profile. The SMS Service Center
Number will be then read out from the SMS profile.
Step 7: Customize the other settings. Ensure there are no red marked lines.
Page 143
6.9.4
NE is within the same LAN like A.I.M.O.S. This example shows connectivity settings
of an ION-M.
Page 144
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.9.5
6.9.5.1
Buttons
Sync NE: Click to synchronize the data from A.I.M.O.S. with the data set in the NE.
An information window will pop up showing the processing of the job status. The
status of the synchronizing will be marked additionally in the column Job Status of
the NE Tree.
Edit NE: Click to edit or to change the connectivity mode and/or the parameters of
the NE.
6.9.5.2
WEB-Login Configuration
Alarm Type
Alarm reporting mode used by the NE; for restrictions see chapter 5.2.
Notification = unacknowledged mode. Alarm delivery is not reliable, an alarm can get
lost along the transmission over the network.
Inform = acknowledged mode. Alarm delivery is reliable; every alarm will be
retransmitted if necessary until A.I.M.O.S. confirms the delivery. Only if this type is
chosen, the options Inform Timeout & Inform Retries are available for NEs supporting
these features:
Inform Timeout: Set the period the NE shall wait if A.I.M.O.S. is not responding to
an Inform message until the NE tries to send the message again.
Inform Retries: Set how many times an NE shall retry to send an Inform message if
A.I.M.O.S. is not responding until the NE stops trying.
6.9.5.4
Zone Change Traps
If the check mark is set, the NE will send a trap each time it changes the zone. It is
recommended to use this option only if absolutely necessary as it might result in a
high number of traps being sent out.
Page 145
6.9.5.5
WEB Server Configuration
Select which type of encryption is used by A.I.M.O.S. for accessing the
corresponding NE selected in the NE Tree. Choose between:
- HTTP only
no encryption
- HTTPS only
For NEs supporting VPN connectivity, the VPN section is provided below the
A.I.M.O.S. section. When the corresponding check-mark is set and the setting is
confirmed, the VPN parameters are displayed and can be edited via the Edit NE
button:
Page 146
M0125ANA.DOC
6 A.I.M.O.S. - Operations
When the check-mark is removed, the latest settings will be displayed:
Page 147
6.10
This optional tool is designed for the automization of Network Element Operations
and to execute configuration changes on multiple NEs. Desired times for such
operations can be set. The time schedule is configured and edited in the Scheduler
menu of A.I.M.O.S. When this tool is licensed, alarm polling is available in the
Scheduler only, and the parameters displayed in the Preferences Editor (chapter 5.2)
will change accordingly.
Access to this tool and its features can be configured in the Account Manager rights
as explained in chapter 5.4.2.
Start All Programs Andrew A.I.M.O.S. Visualization.
In the A.I.M.O.S. Visualization select Tools / Scheduler.
Page 148
M0125ANA.DOC
6 A.I.M.O.S. - Operations
Buttons:
Click New to create a schedule (see next chapter).
Click Edit NE Filter to modify the filter criteria of a schedule (see chapters 6.10.1.2
and 6.4.3.2).
Click Edit Actions to edit the Scheduler actions (see chapters 6.10.1.3 and 6.10.3).
Click View Runs to display the progress and result of a schedule in the Schedule
Runs window.
Click Start Now to start a schedule manually.
To create a new schedule, either click the New button or use the menu item
Scheduler New Schedule. Then, continue as follows:
6.10.1
Customizing a Schedule
6.10.1.1
Name: The first schedule name will be created automatically as Schedule 101. The
number is incremented automatically when creating additional schedules. The name
should be changed to indicate the purpose of the schedule.
Comment: This optional entry field can be filled with additional information to further
identify the schedule.
Page 149
Page 150
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.10.1.2
The available filter criteria that can be set in the Schedule Wizard are exactly the
same as in the filter builder of the NE Tree. For a detailed description of them please
refer to chapter 6.4.3.2 Filter Settings.
To select a filter click the respective filter tab under the menu bar. Use the arrow
button
to scroll through the tabs if the list is longer and exceeds the screen width.
Use the buttons Add or Delete to add or to delete a filter.
Click
to get the amount of repeaters
matching your filter settings:
Use the button Show in Tree to visualize your filter definition in the NE Tree.
Upon leaving the Scheduler you will be asked whether this filter definition should
become a Custom Filter in the NE Tree as if it was created by the NE Filter Builder
(described in chapter 6.4.3 Network Element Filter) or not.
Note: If you decide to make it the custom filter definition, please consider that only
one custom filter is possible.
As default, filters are created as dynamic filters by the Schedule Wizard. For
converting a dynamic into a static filter the Convert into Static Filter button is
provided. For details about filter types and their conversion refer to chapter 6.4.3.4.
Page 151
6.10.1.3
Page 152
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.10.2
XML Import
Three different types of XML imports are available; sample XML files for all are
available in the folder \Program Files\Andrew\A.I.M.O.S.\XML. Depending on the file
type selected in the field XML Import File Name, the according type will be
displayed accordingly in the XML Import Type field. The available file types are:
New Network Element(s): The creation of this type of file for xml import is
described in section 6.2.1 File.
Node G Frequency Setting(s): The creation is user-specific. The creation of
this type of file for xml import is described in section 6.2.1 File.
Importable xml file. The creation of this type of file for xml import is described
in section 6.10.3.8 Create Export.
The same folder also contains the corresponding XML-Schemas (.xsd). The XMLSchema is used to express a set of rules to which the XML document must conform
in order to be considered 'valid'.
DO NOT MAKE ANY CHANGES IN THE XML SCHEMAS (.xsd).
XML files can be edited with an XML Editor (e.g. Microsoft XML Notepad).
Page 153
Page 154
M0125ANA.DOC
6 A.I.M.O.S. - Operations
It is recommended
to create/fill the XML file
via a frequency planning
tool.
In the Schedule Wizard,
the
field
XML-File
Location must be set to
Client, as shown under
c).
Press
button.
Import
XML
Page 155
Page 156
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.10.3
Scheduler Actions
The Schedule Actions Editor opens when the Edit Actions button in the main
window of the Scheduler is clicked. The available choice of actions can vary
depending on the system configuration and on the selection made under Schedule
Kind in the Schedule tab of the Schedule Wizard (see chapter 6.10.1.1):
To edit an action, highlight it in the left part of the window and click the Add button.
The highlighted action is then displayed in the right part of the window, as well, and
can be edited by clicking the Edit button. If this button is disabled (gray), there is no
need for additional settings.
Page 157
Software Update
Currently only available for Node C, G, or M except two-box (DCM1 units) with a SW version <1.5.
Uniquely available when System Actions is chosen as Schedule Kind in the Schedule tab of the
Schedule Wizard (see chapter 6.10.1.1).
Copy NE Configuration
see description below
Use this action to select an NE backup file (created before) in order to transfer it
to other NEs (of the same type):
Create Export
Only available when Export Actions is chosen as Schedule Kind in the Schedule tab of the
Schedule Wizard (see chapter 6.10.1.1).
M0125ANA.DOC
6 A.I.M.O.S. - Operations
Most of the actions correspond to a Network Element Operations (accessible by a
right-mouse click or via the menu Tree Network) or to a feature in a tab of the
Functions Bar. These actions and the corresponding operation / feature are:
Scheduler Action
Try Connection
Send Config SMS
Read Unique System ID
Read Network Structure
Query All Params
Query Actual State
Query Alarms
Read Hardware Inventory Data
Synchronize Time
Reboot Network Element
Create NE Configuration Backup
* In the NE operation the time can also be set freely, while the Scheduler action always sets the
current time.
For details refer to the corresponding Network Element Operation in chapter 6.7.
Scheduler Action
Tab Configuration
Configure Alarm Severity
Alarm Settings
Configure Heartbeat
Heartbeat
Read HW/RF Data
HW-RF / Sync NE
Set Frequency Allocation for Node x (not available for all Node
A types)
HW-RF
Set Pilot Power to Total Power Ratio for Node x
Configure A.I.M.O.S. Dial-In (use to set Dial-In parameters)
Configure NE Connectivity (use to set the parameters Alarm
Type, Inform Timeout, Inform Retries, Zone Change Traps,
WEB Server Configuration, as well as the VPN Connectivity
Parameters).
Scheduler Action
Restore Most Recent Backup
For details refer to the corresponding feature in chapter
6.9 Configuration - Connectivity, or 6.8.3 Maintenance.
6.10.3.1
Connectivity
Connectivity
Tab Maintenance
Backup/Restore
6.8.2 Configuration,
In case the Event Triggered Actions are selected, one of the following actions will be
performed depending on the selection made under having received event: in
Step 2 (see chapter 6.10.1.2).
Page 159
Page 160
M0125ANA.DOC
6 A.I.M.O.S. - Operations
c) Notification: System Startup
If the NE has sent a system is up and running message,
or
d) Alarm: Alarm Queue Overflow
If the NE (ION only) has sent an 'Alarm Queue Overflow' message,
this schedule triggers an automatic alarm sync by performing the following action:
Query Alarms
Page 161
6.10.3.2
File Upload
Then, create a schedule for the upload by clicking the New button and proceed as
follows:
1. Tab Schedule
Enter a name for the Schedule and the Time Plan Settings. Regarding the Time Plan
observe that there are two options.
If desired, the time for the file upload can be explicitly set by entering the specific
time and date. However, the schedule can also be used to start uploads manually
(which will be the more common practice) by entering a point in time in the past in
this field and setting the Run Schedule field to Once.
If a time in the future was set, the Next Run Time (formerly Next Execution
Date/Time) will be displayed in the according field after the Schedule is Enabled by
setting the check-mark. The field stays empty after enabling if a time in the past was
set.
Page 162
M0125ANA.DOC
6 A.I.M.O.S. - Operations
2. Tab Network Elements
Enter the Type and Sub Type of the NE for which the upload shall be carried out in
the according fields.
3. Tab Actions
Choose the action Upload Repeater File and click the Add button. When the action
is displayed under the Selected Schedule Actions, click the Edit button:
Select the configuration file for the according NE type and confirm with OK:
The schedule is now customized. Confirm the Schedule Wizard with OK.
Page 163
If the Time Plan Settings were set to a time in the past, the following message will be
prompted:
If this message is answered with Yes, the set Time Plan Settings will be ignored and
the upload will start automatically at an early point in time set by the system. To be
able to start the upload manually, answer this message with No.
Page 164
M0125ANA.DOC
6 A.I.M.O.S. - Operations
4. Starting the File Upload
To start the upload manually, select the according schedule in the Scheduler (by
clicking in a field of the corresponding schedule column) and click the Start Now
button of the Schedule Settings (see chapter 6.10).
By clicking the View Runs button the progress of the upload will be displayed in the
Schedule Runs window:
When the upload is finished, this will also be stated in the Schedule Runs window.
To see more details (or in case the upload could not be completed successfully), use
the buttons View Results or Log Manager (see also chapter 6.13 Tool Log
Manager) where more extensive information will be provided.
Page 165
6.10.3.3
Software Update
To carry out a software update from A.I.M.O.S. for a certain type of NE an according
schedule has to be customized in the Scheduler (a schedule is also required for a
manual update start).
Before starting with the schedule, the required update file (zip format) which has
been provided by CommScope must be filed in the corresponding folder of the
A.I.M.O.S. server.
Thus, after having received the zip file from CommScope, file it under:
For NEs of type Node A only the immediate activation is available; for Node AM and Node A+ both
schedule options are possible.
In any case, a schedule must be created for the update by clicking the New button
and proceeding as follows:
Page 166
M0125ANA.DOC
6 A.I.M.O.S. - Operations
1. Tab Schedule
Enter a name for the Schedule and the Time Plan Settings. Regarding the Time Plan
observe that there are two options.
If this is desired, the time for the SW update can be explicitly set by entering the
specific time and date. However, the schedule can also be used to start the update
manually (which will be the more common practice) by entering a point in time in the
past in this field and setting the Run Schedule field to Once.
If a time in the future was set, the Next Run Time (formerly Next Execution
Date/Time) will be displayed in the according field after the Schedule is Enabled by
setting the check-mark. The field stays empty after enabling if a time in the past was
set.
2. Tab Network Elements
Enter the Type and Sub Type of the NE for which the update shall be carried out in
the according fields.
Page 167
Page 168
M0125ANA.DOC
6 A.I.M.O.S. - Operations
In the field Mode select the update mode:
If the update should be carried out in two steps (first file transfer to all NEs and then
activation), choose the option Upload. If the activation for each NE should start
directly after the file transfer, choose the option Upload with immediate Activation
(observe that if a Node A SW File has been selected, only the immediate Activation
mode is possible).
Confirm your choices with OK.
This schedule is now customized. Confirm the Schedule Wizard with OK.
By clicking the View Runs button the progress of the upload will be displayed in the
Schedule Runs window:
When the upload is finished, this will also be stated in the Schedule Runs window.
To see more details (or in case the upload could not be completed successfully), use
the buttons View Results or Log Manager (see also chapter 6.13 Tool Log
Manager) where even more extensive information will be provided.
Page 170
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.10.3.4
Explanation:
Performance data are saved to the A.I.M.O.S. database and can then be used by the
Tool Performance Manager (Option) described in chapter 6.16, if this tool is licensed
(Node X and ION). In addition, csv files are saved to the hard disc of the A.I.M.O.S.
server (Node X only).
For NEs of the Node X type observe the following:
If the data are to be used for comparative purposes, make sure that all Nodes
are set to the same time (UTC time, not local time). To set the correct time,
use the NE Operation Set Time (see section 6.7).
In case of a Node AM, the GPS statistics will be queried as well and written
into the A.I.M.O.S. folder on the A.I.M.O.S. server. They will not be used by
the Performance Manager.
Application:
If no Performance Manager license is installed, only the (Node X) csv files can be
used for evaluation with a 3rd party tool (e.g. Excel).
With a Performance Manager license performance data can be evaluated with the
tool Performance Manager (see chapter 6.16).
Do not use this action at an interval of <15 minutes since the minimal measurement
interval is currently 15 minutes.
Procedure:
Start the Schedule action as explained in chapter 6.10.1.3 and the following steps will
be carried out automatically:
Node X only:
At the first start, all available data dating back up to one week are saved to the hard
disk (~\Andrew\AIMOS\Bin\NodeXStatisticsDownload) of the A.I.M.O.S. server as
"[NE Unique System ID]_[date of performance data, 8-digit].csv".
Node X and ION:
All data are saved to the A.I.M.O.S. data base and can be graphically visualized
by the Performance Manager.
Logging:
Failure, warning and other information messages are stored in the Log Manger tool
(see chapter 6.13). In case of failure, please send the generated file(s) to Technical
Support (see also chapter 10.2).
Page 171
6.10.3.5
This action is uniquely available when System Actions is chosen as Schedule Kind in
the Schedule tab of the Schedule Wizard (see chapter 6.10.1.1).
It can be used to generate charts * pre-defined in the Tool Performance Manager
(Option) described in chapter 6.16 to be sent out via mail at specified intervals.
*
For NEs of the Node X type the Read Performance Data schedule (see section 6.10.3.4) must be
carried out before these charts can be provided by the Performance Manager.
Upon adding the action to the Selected Schedule Actions (Add button) and clicking
the Edit button, the following window will open:
Chart Name: Select a chart from the list. This list contains all charts available in the
Performance Manager.
User Name: Select the user from the list.
eMail Receipient: Enter a mail address to which the created charts should be sent.
For general information about customizing an action please refer to chapter 6.10.1.3.
Page 172
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.10.3.6
Use this action to configure (or change) up to 6 users for Node AM* Network
Elements by specifying Role Name, User Name and Password. Configuring User 1
(= Super User) and User 2 (= Operator User) is mandatory, all other users are
optional. A user for whom no data are entered (marked <empty>) will not be created.
*this action is currently not available for other NE types
Note: Please observe to enter all data completely in this mask since only the data
entered here will be valid after the scheduled action has been performed. Thus, when
a single user is to be changed make sure the data for all the other users are still
specified correctly in the schedule, otherwise they will be changed, too, according to
the data in the schedule or even deleted if they are marked <empty>.
Thus, to delete a User remove all entered data so that it will be again marked
<empty> before performing the action again.
Use the field WEB User Management to activate / deactivate the configuration of a
Node AM via Web.
For changing passwords please observe that the following restrictions laid down in
the tab Security of the Server Configuration (see 5.1.3.1) do also apply here:
- General Password Settings
- Minimum Password Length *
- Password Security Level
*
Please observe that for this action the value entered for the Minimum Password Length must not
exceed 16 characters.
Page 173
6.10.3.7
Use this action to configure (or change) a user for ION-M Network Elements by
specifying User Manager, Password Duration in Days, User Name, Password, and
Password Expiration.
Page 174
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.10.3.8
Create Export
When Export Actions is chosen as Schedule Kind in the Schedule tab of the
Schedule Wizard (see section 6.10.1.1), the action Create Export by which most
exports of the Tool Network Element List (section 6.11) can be executed
automatically is available.
As for all other scheduled tasks the following criteria are specified via the Scheduler
homepage (see page 148) and in the Schedule Wizard:
The time of execution for the export is defined in Step 1 of the Schedule Wizard
under Time Plan Settings (see also section 6.10.1.1).
Network Elements to be included into the export are selected via the Edit NE
Filter button of the Scheduler homepage ( see also Step 2 of the Schedule
Wizard, section 6.10.1.2).
Choose the action Create Export to specify how data are to be exported and
depending on the Selected Schedule Action, proceed as follows:
A) Create Network Element List Export
These exports can be configured in the Export Profiles of the Tool Profiles (section
6.17.5).
Configure the Create Export window as follows:
Profile Name: All profiles created in the "Export Profiles" (section 6.17.5) are
available.
Destination: Specify the destination to which the data are to be exported. A write
permission for the selected folder is required.
Type: Define the type of document (xml or Excel) to be created.
Page 175
Page 176
M0125ANA.DOC
6 A.I.M.O.S. - Operations
c) Actions Tab
Step 1: Press Edit button and select folder to which xml file should be saved:
Page 177
Step 3: When the Schedule is finished (this may take some time), the xml file is
saved in the folder specified in step 1.
Page 178
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.11
Access to this tool can be configured in the Account Manager rights as explained in
chapter 5.4.2.
In A.I.M.O.S. Visualization select Tools / Network Element List.
This tool gives an overview of all installed NEs and their subunits. By default all
network elements are displayed. Use Select a View to choose a specific view from
the list box.
The listing can be customized by sort options and filters.
Note: For setting filters to customize the screen display and for saving this
customized view, refer to chapter 6.4.1 Table Filters.
With the different tabs filtered views can easily be displayed.
Via the Export Profiles (of the Tool Profiles) and the Scheduler Action Create
Export exporting these views is also possible. See sections 6.17.5 and 6.10.3.8.
Buttons:
Button Show in Tree serves to use the filtered NE List as a filter for the NE Tree.
Button Locate highlights the selected device in the NE Tree.
Button (Excel-)Export saves the sorted and filtered data into an Excel file.
Button Refresh updates the displayed list.
Page 179
6.12
Please observe that access to this tool can be configured in the Account Manager
rights as explained in chapter 5.4.2.
In A.I.M.O.S. Visualization select Tools / Job Monitor.
This tool lists all current
jobs. The list of jobs can
be saved as Excel file
with the (Excel-)Export
button.
Set the Fade Out time
in seconds to adjust the
time, jobs are listed after
their completion.
6.13
The Log Manager displays the complete logs that are generated by the A.I.M.O.S.
Connector service. Access to this tool can be configured in the Account Manager
rights as explained in chapter 5.4.2.
In A.I.M.O.S. Visualization select Tools / Log Manager.
M0125ANA.DOC
6 A.I.M.O.S. - Operations
Timestamp: Date and/or time the log event occurred.
Message: Log/Alarm message.
Severity: Possible states of the severity can be: Info, Warning, Error, Severe. Please
note that these states are not identical with the alarm severities of the NEs
configured in A.I.M.O.S.
NE Number: An automatically generated A.I.M.O.S. internal number of the NE.
SDN: The system distinguished name (SDN) is an A.I.M.O.S. internal identification
name of the NE.
Component Name: The user defined name of the NE.
Thread: Short name of the functional module of the Connector service; useful to
identify the general domain that a log line applies to.
Thread Name: Like Thread; long name.
Direction: The direction will be displayed only if any communication takes place. The
following directions can be displayed: SB out, SB in, SNMP NB, NB out, NB in,
Unspec in, Unspec out.
Log Kind: Specifies the kind of the log. The following log kinds can occur:
communication = interpreted data by the Connector service;
communication raw: uninterpreted data;
connectivity = belongs to dial-up;
data base = the Connector service accesses the database;
program condition = each kind which can not assigned to one of the possible log
kinds.
Command: Displays the command which caused this log line.
Modem Number: An automatically generated A.I.M.O.S. internal identification
number of the modem.
Communication Resource: Displays which communication takes place, Modem or
LAN.
User Number: An automatically generated A.I.M.O.S. internal identification number
of the user.
MCNC: The A.I.M.O.S. internal unique identifier for network providers consists of the
MCC and the MNC.
User Name: Displays the user sending the command shown in column 'Command'.
Automatically generated alarms are not allocated to a user name.
Schedule Run: Logs that were created by the Scheduler are listed in this column.
Note: From V2.6 onwards Account Manager actions as well as Visu logins and
logouts will also be logged in the Log Manager.
Check Boxes
These two check boxes are helpful if it is necessary to view logs lines exactly.
Active: Remove the check-mark to deactivate the log recording. After setting the
check-mark again the log manager will start listing again. The logs accumulated
during the break remain in the Connector service cache.
Autoscroll: Remove the check-mark to deactivate the automatic jump to the last line
of the log list. Set the check-mark to activate the autoscroll again.
Page 181
Drag folders or NEs to be displayed from the NE Tree and drop them at a map.
6.14.1
Buttons
Use theZoom In and Zoom Out buttons to adjust the resolution of the map.
Parent Map switches to the higher-level map.
Locate in Tree switches to the NE Tree of A.I.M.O.S. and highlights the selected
NEs.
Page 182
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.14.2
Preparation: Create a folder in the NE Tree. Move at least one NE into this new
folder and place the NE on the vector map.
How to: Right-click the new folder and select Map-Assign Map to Folder from the
context menu. Select a bitmap (.bmp) with at least 300x300 pixels, a smaller bitmap
does not make much sense. You may have to press F5 in the NE Tree to update the
NE Tree and NE Map.
Verification: The NE located in the folder should vanish from the vector map due to
the fact, that an NE can only be placed on its parent map. You can then drag and
drop the folder onto the vector map and it should behave like a normal NE. Check the
summary alarm of the folder. Try to drag the NE subunits onto the vector map; it
should no longer be possible, but it should be possible to drag them onto the bitmap.
You can open the bitmap by double-clicking the selected folder icon on the vector
map or selecting Map Show Map from the context menu in the NE Tree.
6.14.3
Preparation: You can assign a bitmap to folders, which are placeable on the parent
bitmap (drag-and-drop).
How to: Assign a second bitmap to a subfolder. Press F5 if the NE Tree does not
refresh. The folder should then be dragable to the parent bitmap.
Verification: The newly assigned bitmap folder and its NE subunits should behave
like a bitmap folder that has the vector map as parent. The folder itself should only be
dragable to the parent bitmap; all its NE subunits should only be dragable onto the
newly assigned bitmap.
6.14.4
How to: Right click a folder with a bitmap assigned in the NE Tree of A.I.M.O.S. and
select Map Delete Map from folder from the context menu.
Verification: The folder icon should be removed from the vector map / parent map.
The NE subunits should reappear on the parent map, if they were placed before the
map was assigned to the folder, but this only works correctly with the vector map until
now. Anyway, the NE subunits should be placeable onto the parent map now.
6.14.5
How to: Select a folder with a bitmap assigned in the vector map, so it gets
highlighted. Double-click on the highlighted icon in the map or select Map Show
Map of the NE context menu in the NE Tree.
Verification: The bitmap you did assign to the folder should show up instead of the
vector map. The Zoom In and Zoom Out buttons should be disabled. The Parent
Map button should be enabled. You can now drag and drop NEs located in the
folder onto the map. The behavior of NEs on the bitmap should correspond to their
behavior on the vector map. Pressing the button Parent Map should get you back to
the vector map.
Page 183
6.14.6
Preparation: You can assign a Bitmap to folders, which are placeable on the parent
bitmap (drag-and-drop).
How to: Select a folder with a bitmap assigned located on a bitmap of a folder, so it
gets highlighted. Double-click on the highlighted icon in the bitmap or select Map
Show Map of the NE context menu in the NE Tree.
Verification: The bitmap should exactly behave like a bitmap located on the vector
map. Pressing the button Parent Map should get you back to the parent bitmap.
6.14.7
6.14.7.1
RF Units
Preparation: Align the Map Window window to the left of the screen and move the
main window out of the right side of the screen, so you can still see the NE Tree.
How to: Pick an RF unit, not included in a bitmap assigned folder and drag-and-drop
it onto the Map Window.
RF units are:
Folder with assigned bitmap
MR repeater
Node A
Node C
Node M
Node G
SMS
Verification: The NE should appear on the Map Window at the place you did drop it.
If the NE has no alarm, the icon should be the icon for this NE type. It should be
selected in the Map Window and have no additional colored ring around. If this NE
is in alarm mode, it should have a ring around, colored with the color of highest
severity this NE has at the moment. Whenever a severity changes, the icon should
change automatically.
6.14.7.2
Optical Systems
Preparation: Align the Map Window window to the left of the screen and move the
main window out of the right side of the screen, so you can still see the NE Tree.
How to: Pick an optical NE not included in a bitmap assigned folder and drag-anddrop it onto the Map Window. The upcoming confirmation box should once be
answered with Yes. After you have confirmed the result, you should drag the same
NE once again onto the map, answering No to the confirmation box.
Optical systems are:
BCA Britecell
MC Master Controller
MOR Optical Repeater
Page 184
M0125ANA.DOC
6 A.I.M.O.S. - Operations
Verification: If you have included the NE subunits, all includable NE subunits should
be on the Map Window as well, placed aside the optical master. The optical master
should have the summery alarm of each NE subunit APART from those included on
the Map Window. If the summary alarm state changes, the icon should change to
the new state as well.
If you exclude the NE subunits from the Map Window, the icon should have the
summary alarm of ALL subunits.
You should not be able to drag and drop NE subunits of an optical system out of the
NE Tree into the map, independent whether or not the optical master is on the map.
6.14.8
Selecting an NE
How to: Select an NE on the Map by clicking on it once. If more than one NE was
selected accidentally, a popup window will appear to specify the selection.
Verification: The selected NE should now be highlighted and its icon should change
to an icon identifying the NE type. Verify that the selected NE is in the NE Tree. If
more than one NE was selected accidentally, a popup window will appear to specify
the selection. The selected NE should then be highlighted.
6.14.9
How to: Select an NE on the map. Then drag it to the desired location.
Verification: Provided that the mouse cursor was moved far enough, the icon should
now appear at the place where it was dragged.
6.14.10
6.14.10.1 RF Units
How to: Right-click a selected RF unit in the vector map and select Delete in the
context menu.
Verification: The RF unit should vanish from the vector map.
6.14.10.2 Optical Systems
How to: Right-click a selected master icon of an optical system and select Delete in
the context menu.
Verification: The optical master and all its subunits should vanish from the vector
map. This should work with every NE on the map.
6.14.11
NE Subunit Management
View
6.15
TOOL WATCHDOG
Please observe that access to this tool can be configured in the Account Manager
rights as explained in chapter 5.4.2.
In the A.I.M.O.S. Visualization select Tools / WatchDog.
With this tool all running applications are displayed. If necessary, applications can be
paused and started again.
For further information please also refer to chapter 7.5 WatchDog.
6.16
This tool mainly serves for creating comparative charts of alarms and performance
data, which can be stored, exported, or saved as image files.
Access to this tool can be configured in the Account Manager rights (see chapter
5.4.2).
With the Performance Manager tool alone, only charts from alarm data can be
created. In order to be able to create charts from performance data, as well, or for
generating charts at certain intervals and sending them out via mail, the tool
Scheduler (see chapter 6.10) is also required.
Page 186
M0125ANA.DOC
6 A.I.M.O.S. - Operations
Before the performance data can be used by the Performance Manager, they have to
be retrieved from the respective NEs as follows:
In order to get the performance data of an NE - i.e. csv file on HD (Node X only) and
data in database (Node X & ION) - use the Scheduler action Read Performance
Data explained in chapter 6.10.3.4.
Using the action Create Performance Data Chart (see 6.10.3.5) of the Scheduler it
is possible to generate charts (which must be pre-defined in the Performance
Manager) at certain intervals and to send them out via mail at specified addresses.
Both the intervals and mail addresses can be customized in the Scheduler action.
In the A.I.M.O.S. Visualization select Tools / Performance Manager.
The name of the chart currently selected is displayed here.
6.16.1
Menus
Page 187
6.16.1.1
Performance
Apart from the common items Undo, Refresh, and Close this menu also provides
the possibility to export alarm data as excel file (Export Alarm Data).
Confirm chart settings with Apply (or use the Apply button). For details see 6.16.2.
6.16.1.2
Chart
New Chart: All settings made are deleted use to define a new chart from scratch.
Save Chart Configuration / Save as New Chart Configuration: Use to save a
chart configuration for later use or to make it available for the Scheduler action
Create Performance Data Chart (see chapter 6.10.3.5).
Use Save Chart Configuration to save it under the given name (no name will be
requested) or Save as New Chart Configuration to save it under a new name (the old
name will, however, be suggested). When a chart is saved for the first time the Chart
Title (see next section) is suggested as its name.
Loading a configuration again may take some time since the evaluation starts anew.
Load: Use to load a pre-defined chart configuration from the list provided.
This list contains a series of pre-defined factory-set configurations as well as
individually set (see 6.16.2) and saved (see next menu item) personal configurations.
The factory-set configurations serve to generate charts for the most useful
evaluations since creating a chart configuration from scratch is a complex matter.
Rename: Use to change the name of a chart already saved.
Delete: Use to delete configurations that were already saved.
Save as Image File: Select a path to save the current chart series as image file
(emf, etc.). This way of storage is recommended if the main purpose is to be able to
quickly view a chart at a later time.
Print Chart / Print Chart with Aspect Ratio: Use to print a chart.
6.16.2
Settings
Notes:
When setting the chart parameters, please keep in mind that not all of the various
combinations make sense. Due to the great variety of setting options it is not
possible to give examples for all. In view of this complexity of the Performance
Manager, experience in working with charts is indispensible for this tool.
In addition, no more than 16 different types of measurement values should be
integrated in one chart, since the number of colors for the distinction of the values
is restricted.
The pre-defined configurations that can be loaded via the Chart menu (see 6.16.1.2)
may be used as reference and modified in order to meet individual requirements. If
you plan to keep a factory-set configuration for later use, take care not to overwrite it.
To keep both configurations, save the modified version under a new name.
Page 188
M0125ANA.DOC
6 A.I.M.O.S. - Operations
The following settings can be made to customize a chart:
Depending on your choices in the
individual fields the further options will be
adapted accordingly. Since the
parameters vary, the screen shots in the
following are always of an exemplary
nature.
This explanation is intended to provide an
overview of the most important setting
options. At the end of this chapter an
exemplary chart is added to illustrate the
various settings.
A field that is marked red (e. g. beside
Series Type or Data Source in the
example to the left) indicates that a
problem or warning message is available
for this selection. Move the cursor over
the respective option to display the
message as illustrated in the following
examples.
.
.
.
.
Series Layout:
M0125ANA.DOC
6 A.I.M.O.S. - Operations
For Data Source Network Element select the Type for the classification (e. g.
Folder, NE Type, etc.).
For Data Source Alarm Type select the Severities to be used by setting the
check-marks accordingly.
For Data Source Date Time select the Type (= interval to be used) for the
classification (e. g. Hourly, Daily, etc.).
Left Axis / Right Axis:
Select the scale for the Y-Axes by choosing
between a linear and a variety of logarithmic
divisions. Different settings for the Left Axis
and Right Axis are possible.
A logarithmic division is recommendable if the span of values is great, so that lower
values can also be displayed in a distinct way (see also example at the end of the
chapter).
Chart Series (n):
For each chart series select the Source Type, the Series Type and assign the
Horizontal Axis (Bottom or Top) and Vertical Axis (Left or Right). Please also have a
look at the example at the end of this chapter to get a better understanding of the
various setting possibilities.
Source Type:
Select the source for each series (Alarm
Data* or Performance Data**; reset is
possible by selecting the empty field).
* Alarm Data refers to all alarms in A.I.M.O.S. no matter if visible in Supervision or Alarm History.
** Performance Data refers to data downloaded by A.I.M.O.S. via the tool Scheduler (see chapter
6.10.3.5.); currently this source is only supported for Node C, G, or M except two-box (DCM1 units)
with a SW version <1.5.
Series Type:
Select the type for each series (Line, Bar,
or Pie).
Horizontal Axis: Select to which
horizontal axis (Bottom or Top) this chart
series shall be assigned.
Vertical Axis:
Select to which vertical axis (Left or Right) this chart series shall be assigned.
Page 191
Alarm Raise Count: Amount of all alarms raised, irrespective of whether alarms
were subsequently cleared or recognized.
Active Alarm Count: Amount of alarms (that were not cleared) for a specific time.
Availability: The availability gives an indication of
the success ratio of a Network Element. When this
option is chosen as data source, a further
distinction (Type) is provided to choose between
the following:
Suspended is the ratio of suspended* periods to the charts scope.
Active is the ratio of not suspended* periods to the charts scope.
Success is the ratio of periods without any alarm to the charts scope less
suspended* times.
Failure is the ratio of periods with active alarms to the charts scope less
suspended* times
* Suspended times (periods) are currently only supported for the Node AM. Network
Elements are suspended when they are Off Duty (NE is powered on but 'out of operation
area', which means that no alarms are generated) or Shut Down (i.e. 'out of service').
Alarm Duration: Indicates the overall alarm duration of all alarms. If an alarm is
still active at the end of the charts scope, the alarm is treated as if it was cleared
at the end of the charts scope.
For all types of data source you can enter minimum or maximum values (or a
combination of both) to be used for the evaluation. If you only want to see the top
scores in the set period, enter the according figure in the field Top (e. g. Top 5). The
example on the next page illustrates such a setting.
Page 192
M0125ANA.DOC
6 A.I.M.O.S. - Operations
Example: The X-Axis shows various alarm times and the Y-Axis the sum of alarms
for each point in time. If Top 5 is chosen in this case, the chart will be reduced to
those alarm times with the most, second most etc. up to fifth most alarms, as shown
in the following illustration:
Page 193
Grouping (Z-Axis):
Select the Data Source to be used for grouping
(Network Element, Alarm Type, or Date Time).
Depending on the Data Source selection, specify Type or Severities (the available
choices are the same as for the X-Axis see description Bottom Axis / Top Axis):
A color code will be used in the chart to visualize the individual groups.
If Performance Data is selected as Source Type, the following options vary from the
explanation above:
As Data Source in the Calculation (YAxis) the options NE Data and Channel
Data are provided. The available settings
are as follows (Channel is only provided
if Channel Data is selected):
Measurement
shows the type of
value that was
selected in the
Node (in this
example i.e. DL Rx
Power) and
transferred to
A.I.M.O.S. via the
Scheduler.
Channel provides a context-sensitive list depending on the available data.
Aggregation: If more measurement values are available for the same measured
variable on the X-Axis*, use this field to decide which value should be
represented in the chart (e. g. minimum or maximum value or an average of all).
* This can be the case when Bottom Axis -> Type -> Hourly was selected but 4 measurements
per hour are made; thus 4 values are available.
- As Data Source in the Grouping (Z-Axis) only the option Network Element is
provided.
In all other respects the explanation for the Source Type Alarm Data is valid for the
Performance Data, as well.
Page 194
M0125ANA.DOC
6 A.I.M.O.S. - Operations
When all settings are made, click the Apply button to generate the according chart
series and continue with the further series, if required.
Example:
The exemplary chart on the next page was generated with the following settings:
The Time Period from 15th to 21st of
September 2009 was used for the
evaluation.
The number of Network Elements of the
Bottom Axis is restricted to 40.
Therefore, the chart extends over the
required number of pages.
Two Chart Series are defined.
Since no Chart Series is assigned to the
Top Axis, it is not displayed in the chart.
The left axis is divided logarithmically
the distance from 0 to 10 and from 10 to
100 is the same and values below 10 can
thus also be clearly distinguished.
Not assigned in the exemplary chart.
The (orange) bars in the chart represent
the rate the individual NEs (Each Single
NE was chosen as Type for the Bottom
Axis) were operating (= not Off Duty) but
in alarm state (Availability Failure).
Not defined.
Page 195
6.17
TOOL PROFILES
Only when the tool Performance Manager (see chapter 6.16) is licensed, the Alarm
Profiles are available. This profile serves to assign individual names to certain
alarms. The alarm groups specified here can be used by the Performance Manager.
For more details see chapter 6.17.4.
Page 196
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.17.1
For details about the Network Element Circuit Switched Profiles see chapter 5.3.3.2.
For details about the Network Element Web Login Profiles see chapter 5.3.3.5.
6.17.2
NE Owner Profile of Account Manager
Assign the NE Owner profile to an NE via the Configuration / General tab of the
functions bar (see chapter 6.8.2).
Access to this profile can be configured in the Account Manager (chapter 5.4.2).
6.17.3
Page 198
M0125ANA.DOC
6 A.I.M.O.S. - Operations
Account Manager Rights ('Configuration'; see 5.4.2).
6.17.4
Alarm Profiles
Alarm Profiles provides two menus (Alarm Profiles and View) to create, export, edit,
delete and view the alarm profiles that can be used by the Performance Manager
(chapter 6.16) for the creation of alarm charts. The Alarm Profiles window displays a
table of all available alarms.
Profiles can be created via Alarm Profiles Profile Management Create new
Profile and entering a name.
Page 199
To delete alarms from a profile click the according check-marks or highlight the
according alarms and use the Alarm Profiles menu item Delete selected Alarms
from Profile.
To display the alarms of all profiles or only of an individual
one, use the All Profiles button to select all or an
individual profile. The displayed table and button will
change accordingly:
This selection is also possible via the menu item Profile
Filter of the View menu.
Please observe that if an alarm line is clicked in this view, the according alarm will be
removed from this profile, as if it was unchecked.
Furthermore, the View menu can be used to save
or load individual grid layouts for the table and
provides a Filter Builder to customize it further. For
further details on grid layouts and filter builder
please refer to chapters 6.4.1.3 and 6.4.2.
Use the Excel Export button to save the Alarm Profile settings currently displayed as
Excel file.
Page 200
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.17.5
Export Profiles
With the Scheduler action "Create Export" (see chapter 6.10.3.8) the Export Profiles
can be configured further and the export can be scheduled as required. Creating an
Excel or xml file is possible.
In the Export Profiles select which data are to be exported and configure the
available parameters as follows:
Profile Name: Specify a unique name for the export. This name will also be available
in the export configuration of the Scheduler. If an already existing name is entered,
the entry will be marked red and the system will prompt you to change it.
Export Name: Available data types (mainly views from the Network Element List,
chapter 6.11) are listed (not configurable).
Export Details: The data to be exported can be specified using the Edit button to
open a checkbox list for an individual data selection:
Type:
Select the View to be exported (see also
Network Element List, chapter 6.11).
Fields to export:
In this list the data to be exported can be
individually specified by tagging /
untagging the according checkbox. (The
items available in the list depend on the
Export Type.)
Page 201
6.17.6
Access to the External Tool Profiles must be configured in the Account manager
(Reporting right). For details see chapter 5.4.2.
An External Tool Profile must be configured in order to be able to execute the Run
External Tool action of the Tool Scheduler (Option), chapter 6.10.3. This action
serves to start external tools (e.g. exe or batch files) via A.I.M.O.S.
The following parameters must be set:
Name:
Executable:
Arguments:
Working Directory:
Page 202
M0125ANA.DOC
6 A.I.M.O.S. - Operations
6.18
OMC3 ADAPTER
To start the visualization of this service double-click on the OMC3 icon in the system
tray.
Note: Please observe that the OMC3 Adapter is not visible in the "system tray"
with Windows 2008 irrespective of the A.I.M.O.S. version.
6.19
SNMP GUI
This program is used for the graphical supervision of the SNMP Agent service, which
is used by A.I.M.O.S. for the synchronization of SNMP traps. For the configuration of
the SNMP Agent please refer to chapter 5.1.4. Program and service are started
automatically
To start the visualization of this service
double-click on the SNMP icon (green circle) in the system tray (Win2003)
or
select Start Programs Andrew A.I.M.O.S. SNMP GUI (Win2008).
Page 203
In the Status tab the performance data of the SNMP Agent are displayed:
The Diagnosis tab can be used to get more detailed information on the
performance data in the Status tab or for logging purposes. The tabs that are
included in the Diagnosis tab are selected in the Settings tab:
Use the Settings tab to select which data are made available in the Diagnosis tab
by tagging the according fields:
Page 204
M0125ANA.DOC
Backup to File
Select or enter the path to and the name of the backup file. Enter the complete name
of the file with suffix .aimosbackup*, e. g. backup_3_8_04.aimosbackup.
A number is automatically attached to the filename of the backup file
(e. g. backup_3_8_04[0000].aimosbackup).
Please note: A backup includes all vital settings from the A.I.M.O.S. Server
Configuration / Configuration Tool (see chapter 5.1). The Configuration Tool settings
(see section 7.2.5) will be included automatically, thus, if settings in the A.I.M.O.S.
Configuration Tool were changed, it is recommendable to make a new backup.
Please observe that the Configuration Tool itself also provides a button to make a
backup of most of its current settings (see chapter 5.1).
* Until A.I.M.O.S. version 2.9.0 the backup file was saved with suffix .zip.
Page 205
7.1.2
Include A.I.M.O.S.
Include OMC3
Backup Finished
7.2 RESTORE
Use the Restore functionality of
A.I.M.O.S. to restore former
stages of the software.
(Automation is possible via the
Automatic Backup feature; see
chapter 5.9.
Here, the list of backups is displayed
(see chapter 7.2.4).
Notes:
The restore can only be carried out if a backup of A.I.M.O.S. has been saved
before.
Only a backup of the running version can be restored (see also chapter 7.2.6
Backup Version).
The WatchDog will close all necessary applications for the restore and will start
these applications automatically after the restore.
Page 206
M0125ANA.DOC
7.2.1
Select or enter the path to and the name of the .aimosbackup file *. Registry
entries, the A.I.M.O.S. database and the OMC3 database can be restored. Previous
backup files are displayed in the list of backups.
Please note that before and after a restore it is always recommended to check all
settings in the A.I.M.O.S. Configuration Tool. This is essential because unwanted
registry settings could have been restored or windows settings may have significantly
changed since the restored backup was created.
* Until A.I.M.O.S. version 2.9.0 the backup file was saved with suffix .zip.
7.2.2
Restore A.I.M.O.S.
Check this checkbox to include the A.I.M.O.S. database to the restore procedure.
7.2.3
Restore OMC3
Check this checkbox to include the OMC3 database to the restore procedure.
Note: Before the OMC3 restore can be started the WatchDog stops all open
accesses of the OMC3 database and restarts them after the restore.
To use this feature an OMC 3.54 has to be installed.
7.2.4
The files of all previous backups are displayed in this list. Select the file from the list
and start the restore procedure.
7.2.5
This option serves to restore all settings of the Server Configuration Tool (see
chapter 5.1 Server Configuration / Configuration Tool) at the time of the backup.
If the check-mark is not set, only the settings of the pages "Licenses", "Security",
"Logging", and the settings "Visu Gateway Port" (at "General" page) and "Length of
Generated Community Name" (at "SNMP" page) will be restored. Set the check-mark
to restore all other Configuration Tool settings, as well.
Please observe that the Configuration Tool itself also provides a button to make a
backup/restore of most of its current settings (see chapter 5.1).
Note: In a migration scenario from Windows 32 Bit to Windows 64 Bit, do NOT
set the check-mark for the first Restore if the Table of Contents has
changed (e.g: Windows 32 Bit: "C:\Program Files; Windows 64 Bit:
"C:\Program Files (x86)").
Page 207
7.2.6
Backup Version
When a file is selected, the A.I.M.O.S. version under which this file was created is
displayed. If this version corresponds to the running A.I.M.O.S. version, it is written in
green indicating that a restore is possible. If the file was created by a former version
of A.I.M.O.S., restoring it is not possible and the writing is red.
7.2.7
Restore Finished
7.3 VALIDATE
Validating a database means to check the consistency of the database and to repair
errors, if necessary. It is recommended to validate the database of the
OMC3/A.I.M.O.S. if errors occur within the program or if the operating system is
ended abruptly, e. g. in case of a power failure.
M0125ANA.DOC
7.3.1
Include A.I.M.O.S.
Check this checkbox to include the A.I.M.O.S. database to the validation procedure.
7.3.2
Include OMC3
Check this checkbox to include the OMC3 database to the validation procedure. To
use this feature an OMC 3.54 has to be installed.
7.3.3
Validation Finished
7.4 UPDATE
Use the update functionality to update the A.I.M.O.S. server (please also see chapter
4.3.1).
Page 209
7.4.1
Select or enter the path to and the file name of the update zip file. Start the update by
clicking the 'Start' button.
(In case of updates from very old versions the following screen appears:
Page 210
M0125ANA.DOC
7.4.2
Update Finished
7.5 WATCHDOG
Please also see chapter 6.15 Tool Watchdog.
The WatchDog displays all running A.I.M.O.S. applications. If necessary, e.g. for a
validation of a database, the WatchDog stops and automatically re-starts applications
accessing the database(s).
With the context menu of the right-mouse click on the top line applications can be:
paused (stopped with the option to re-start the application)
started, after they have been paused
stopped (shutdown the application with the possibility for the application to save
changes).
Also A.I.M.O.S. can be shut down.
Page 211
Page 212
M0125ANA.DOC
Set the check-mark for Private networks, such as shown in the figure above
and confirm by clicking "Allow Access". If this alert is quit with "Cancel", the program
will not function properly and can not be used for test purposes. At the next program
start the alert is no longer displayed to change this. So please make sure to follow
this procedure.
Page 213
To simulate an NE via AgentSim, start the program and select the NE type you
would like to simulate from the list provided:
Do not close the window for the time of the session; just minimize it.
-
Then, the NE can be created as explained in chapter 6.5. Please verify that the IP
port is set to 165 (default setting):
When 0 is entered four times as
IP-Address in the new NE
dialogue in the Visualization, the
correct address (corresponding
to IP address of the OMC server
see chapter 5.1.2) and port
will be set automatically.
Note: For common application it
is not necessary to adjust the
configuration of the AgentSim. If
adjustments are required for
special purposes, open the file
AgentSim.ini under
~\Andrew\AIMOS\Bin
and make the required setting
before starting the AgentSim.
* These two settings must correspond to the settings in the A.I.M.O.S. server and in the Server
Configuration / Configuration Tool (see chapter 5.1.2: OmcIp corresponds to IP Address of the
OMC Server and OmcPort corresponds to SNMP Trap Port of the OMC Server).
Now, the AgentSim.exe window can be used to simulate certain events for the
NE, e. g. raising test alarms, etc.:
Page 214
M0125ANA.DOC
Corresponding to
IP-Address / Port of
New ION-M window
(see below).
To simulate such systems, start the program and create the required NEs as
explained in chapter 6.5. Please verify that the IP Port is set to 7420. When 0 is
entered four times as IP-Address during the NE creation in the Visualization, the
correct IP Address (corresponding to IP address of the OMC server see
chapter 6.1.2) and Port will be set automatically.
Corresponding to
Partner IP / Port of
Comas window (see
above).
After clicking the Open Session button in the Comas-Test window, the tool can
be used to simulate certain events for the system, e. g. raising test alarms, etc.:
Do not close the Comas-Test window for the time of the session; just minimize it.
Page 215
8.3 MIB
This tool is a MIB viewer; see exemplary figures below:
Page 216
M0125ANA.DOC
9 Logging
9 LOGGING
9.1 LOG FILE DOCUMENTATION
A.I.M.O.S. provides a variety of different log files depending on the purpose. All log
files are stored at the A.I.M.O.S. Server.
9.1.1
9.1.2
9.1.2.1
Content abstract:
Location: ~\Andrew\AIMOS\Bin\Log
Name: ProcessingServices.log
Trigger: ProcessingServices.jse and UninstallServices.jse
Size: > 5 KB The exact size depends on how many installation and uninstalling
procedures were performed.
Size required per day (role of thumb): none
Configuration: not required
Rotation: none
Format: [Date] [Time] [Event]
Example: 2010-10-08 10:14:00.300; Guardian starting: "[Firebird Installation
Directory]\Firebird_2_5\bin\fbserver.exe"
Note: This log file contains all operations which are performed in addition to the
InstallShield installation and uninstalling procedures.
Page 217
9.1.2.2
Content abstract:
Location: ~\Andrew\AIMOS\Firebird
Name: firebird.log
Trigger: FirebirdServerServerDefaultInstance & FirebirdGuardianDefaultInstance
Size: > 4 KB - The exact size depends on how many database procedures were
performed.
Size required per day (role of thumb): approx. 1 KB per day
Configuration: not required
Rotation: none
Format:
Example:
9.1.2.3
Connection to OMC3
Content abstract:
Location: ~\Andrew\AIMOS\Bin
Name: AIMOS_OMC3_Adapter.Dmp
Trigger: A.I.M.O.S. OMC3 Adapter
Size: > 4 KB - The exact size depends on how many OMC3 operations were
performed.
Size required per day (role of thumb): approx. 4 KB per day
Configuration: not required
Rotation: none
Format: [Date] [Time] [Event]
Example: 08.10.2010 10.14.13.253 Application Starting ...
Note: This log file is only available if a connection via OMC3 Adapter was
established or, respectively, if a supervision of old Andrew repeaters is intended.
Page 218
M0125ANA.DOC
9 Logging
9.1.2.4
Content abstract:
Location: ~\Andrew\AIMOS\Bin\Log
Name: AIMOS_Maintenance.log
Trigger: A.I.M.O.S. Maintenance Tool
Size: > max. 3 MB - The exact size depends on how many database maintenance
operations were performed.
Size required per day (role of thumb): none
Configuration: not required
Rotation: If the limit of 3 MB is reached, the first 1.5 MB will be deleted.
Format: [Date] [Time] [Event ID] [Source ID] [Event]
Example:
09.10.2010 13.04.20.495 [ 2621926] [ App. ]
Starting checkpoint: Validate: Load database information
9.1.2.5
Content abstract:
Location: ~\Andrew\AIMOS\Bin
Name: autobackup.log
Trigger: AIMOS_db_backup.js
Size: > 1 KB - The exact size depends on how many backup operations were
performed.
Size required per day (role of thumb): none
Configuration: not required
Rotation: configurable via AIMOS_db_backup.js
Format: [Date] [Time] [Event]
Example: 9.10.2010 13:12:25.11: Starting automatic backup, version: 3.2
More Information: see Users Manual for Automatic Backup Feature (M0125B6),
chapter 5.1.
Note: This log file is only available if the Automatic Backup Feature is used or a
redundant A.I.M.O.S. Server Configuration is intended, respectively,
Page 219
9.1.2.6
Content abstract:
Location: ~\Andrew\AIMOS\Bin
Name: autorestore.log
Trigger: AIMOS_db_restore.js
Size: > 1 KB - The exact size depends on how many restore operations were
performed.
Size required per day (role of thumb): none
Configuration: not required
Rotation: configurable via AIMOS_db_restore.js
Format: [Date] [Time] [Event]
Example: 9.10.2010 13:19:46.894: Restore Started, version=3.2
More Information: see Users Manual for Automatic Backup Feature (M0125B6),
chapter 5.2.
Note: This log file is only available if the Automatic Backup Feature is used
respectively a redundant A.I.M.O.S. Server Configuration is intended.
9.1.2.7
Services Supervision
Content abstract:
Location: ~\Andrew\AIMOS\Bin\Log
Name: WatchdogAutomatedObject[ID].Log
Trigger: A.I.M.O.S. Watchdog Service
Size: > 4 KB - The exact size depends on how A.I.M.O.S. is used.
Size required per day (role of thumb): approx. 4 KB per day
Configuration: not required
Rotation:
Page 220
M0125ANA.DOC
9 Logging
9.1.2.8
Content abstract:
Location: ~\Andrew\AIMOS\Bin\Log
Name:
AIMOS_Connector_Log_[Current_Year]_[Current_Month]_[Current_Day].Log
Trigger: A.I.M.O.S. Connector Service and AIMOS_Visu.exe
Size: > 20 KB - The exact size depends on how A.I.M.O.S. is used and how logging
is configured.
Size required per day (role of thumb): approx. 20 KB per day
Configuration: see chapter 6.13 Tool Log Manager
Rotation: Files are stored on a daily basis and compressed. The duration of their
storage can be set in the Housekeeping tab of the Server Configuration /
Configuration Tool.
Format: [Timestamp],[Message],[Severity],[Log Kind],[Thread],[Thread
Name],[Unit Nr],[Unit SDN],[Component Name],[Modem No.],
[Comm.Resource],[Command],[Direction],[MCNC],[User No.],[User
Name],[Run No.],
Example: "2010/10/08 10:14:08.097","Initializing Communication
Resources",Info,Program Condition,CCOORD,"Comm. Resource
Coordinator",,"","",,"","",,,,"",
9.1.2.9
Page 221
9.1.2.10
Server Update
Content abstract:
Location: "~\Andrew\AIMOS"
Name: "Install.txt"
Trigger: "MSIEXEC.exe"
Size: > 10 KB - The exact size depends on how many database procedures were
performed.
Size required per day (role of thumb): none
Configuration: not required
Rotation: none
Note: The contents or format of this log file is determined by Microsoft TM. More
Information about the database update can be found in chapter 9.1.2.4 Database
Maintenance Operations.
9.1.2.11
SNMP Operations
Page 222
M0125ANA.DOC
10 Troubleshooting
10 TROUBLESHOOTING
10.1
RAS CONNECTIONS
In case of failures with the dial-in procedure ensure to check the following items:
Verify that communication with the Modem is possible: In order to run this
check, the incoming connection must be deleted (basic remote access
server) or the RRAS server must be stopped (advanced remote access
server). They must be added again after this test. Open Control Panel (Start>Settings->Control Panel), double click on Phone and Modem Options.
Select Modems Tab and select your modem. Click on Properties and select
the Diagnostics tab. Press query modem. Check the output to verify if
communication to the modem is possible.
Verify that the Modem is logged in into the mobile network (only wireless
modems) refer to the modem documentation to find out how to check this.
MC35/MC88: the blinking scheme of the green LED indicates whether the
modem is logged in into the network. A regular blinking scheme indicates that
the modem is not logged in. Short single periodical flashes indicate that the
modem is logged in to GSM/Circuit switched. Short double periodical flashes
indicate that the modem is logged in to GPRS. Possible reasons are -SIM card
protected by a PIN -no antenna connected to the modem -no network
coverage.
Password not stored in the reversible encryption format. Ensure that the
security policy allows storing the password of the dial-in user in a reversible
encryption format (ref. chapter 13.1.1). After changing this option, the
password of the dial-in user needs to be set again.
Dial-in user defined at the wrong location. Windows allows adding users on a
local machine or within a domain. If A.I.M.O.S runs as on a standalone
machine the dial-in user must be defined locally. If A.I.M.O.S runs on a
machine that is part of a windows domain, the user can be defined locally or
within the domain. If the user is defined locally, the format on the remote
machine must be: <server name>\<user name> (ref. to chapter 13.1.2).
Page 223
10.2
TECHNICAL SUPPORT
If a question arises about A.I.M.O.S. or the equipment, first look in the A.I.M.O.S.
documentation or consult online help. If the answer cannot be found, please do not
hesitate to contact CommScope Solutions product support:
+49 90 99 69 333 Germany
WIsupport@commscope.com
When you call, you should have the appropriate product documentation at hand.
Please be prepared to give the following information:
Version number of A.I.M.O.S. software.
Type of server/modem hardware incl. network hardware and network structure.
OS (operating system).
Exact content of any messages that appeared.
A description of how the error occurred.
The repeater hard- and software information (if applicable).
To speed up the trouble analysis, prepare the following:
1. System Information tool
Start menu
For Windows 7 / 2008 starting the "System Information" tool with the option "Run As
Administrator..." is mandatory.
Page 224
M0125ANA.DOC
10 Troubleshooting
In the background, the following status screen is displayed during the process:
The final screen shows the location of the file containing the script created in
this process:
* Please observe that the Log tab must first be activated via the Preferences Editor Other
Settings Show Visu Log (see chapter 5.2) since it is deactivated by default.
Page 225
3. Major SW Errors
From A.I.M.O.S. V2.8.0 onwards major SW errors (e.g. Access Violation, Stack
Overflow, Out of Memory, etc.) will be communicated to the customer as follows:
Page 226
M0125ANA.DOC
10 Troubleshooting
10.3
LICENSE INSTALLATION
The following error messages might be prompted during the license installation:
'You are not allowed to install the following license:'
The A.I.M.O.S. user has not the right to install a license.
Another A.I.M.O.S. user who is allowed to install a license (e.g. Admin) must
be used.
'The following license cannot be used for your organization:'
A license for another Organization has already been installed or a license for
another Organization was installed and has been deleted (e.g. 244004). The
MCNC of the license to be installed and the previous one do not match.
A new installation or a database restore (a backup prior to the initial license
installation) is required.
'The following license is invalid:'
The license is not valid, i.e. it was probably changed / damaged.
Please contact Technical Support.
'The following license is not valid for A.I.M.O.S. V2.x.x.x:'
The versions of the license and of A.I.M.O.S. do not match.
A new license must be requested.
'The installation of the following license has failed:'
The database is probably damaged.
Please generate a database backup and contact Technical Support.
Page 227
Page 228
M0125ANA.DOC
11 Glossary
11 GLOSSARY
A.I.M.O.S.
Andrew Integrated Management and Operating System
Company Kind
The kind of company is automatically added when a new organization is added.
Company kind can be: 0 = Telecommunication company (Telco) or 2 = Provider.
DCM1
Digital Channel Module of the 1st generation used in Node M/C two-box repeaters.
The successive one-box models are equipped with the DCM2 module.
ION
Intelligent Optical Network; two systems are available:
ION-B = Intelligent Optical Network - Britecell
ION-M = Intelligent Optical Network - MMR (= successor of MMR)
LDAP
Lightweight Directory Access Protocol (= application protocol for reading and editing
directories over an IP network).
MANAGEMENT INTERFACE
The Management Interface displays all information available for the selected system
or NE. If settings or values can be changed, the possible changes are displayed in
different colors.
MCC
Mobile Country Code. Unique identifier for Network Providers
MCNC
Mobile Country-Mobile Network Code / Organization Code. Consists of the MCC and
the MNC and is used in A.I.M.O.S. as unique identifier for the Network Provider.
MIB
Management Information Base
MMR
MMR optical systems are the predecessor of the ION-M system. From A.I.M.O.S.
Version 2.8 onwards the designation 'ION-M' replaces 'MMR' in the software.
MNC
Mobile Network Code: Unique national identifier for Network Providers
MU OTRx
Master Unit Optical Transceiver (equals SRMU): Optical transceiver in an ION-M
system. This term is gradually replacing the former designation SRMU.
Page 229
Page 230
M0125ANA.DOC
or
Page 231
Page 232
M0125ANA.DOC
Click the
button.
Properties
Page 233
Click the Diagnostics tab and then Query Modem button. If the
communication with the modem is possible, the window will change.
In the Advanced Tab select the Change Default Preferences ... button.
Ensure that Flow Control = Hardware is selected.
Page 234
M0125ANA.DOC
Please observe that the setup described (screen shots are taken from a Win2003
server) is the recommended setup, but not mandatory. Since the procedure for
Win2008 is similar this description can be used as well, but please observe that
some screens may look slightly different.
The following dial-in authentication Node X
method is used:
13.1.1
ION-M (MMR)
Britecell /ION-B
MD5-CHAP
Security Policy
The users password needs to be stored in a way that allows windows to decrypt the
password. This is a prerequisite for the MD5-CHAP authentication algorithm to work
successfully.
The procedure for the setting of the Security policy depends on the fact whether the
A.I.M.O.S computer is a standalone machine or part of windows domain.
13.1.1.1
This chapter is applicable only for an A.I.M.O.S machine that is not part of a windows
domain.
The Local security Policy management console can be opened via:
Start Administrative Tools Local Security Policy
Ensure that the effective setting of the option Store password using reversible
encryption for all users in the domain is set to enabled. After changing the value, do
a right-mouse click on security settings in the left window and select the option
reload in order to retrieve the current effective setting of the value.
13.1.1.2
This chapter is applicable only for an A.I.M.O.S machine that is part of a windows
domain. In this case the domain settings override the local settings.
Go to administrative tools/active directory users and computers.
Double-click on the dial-in user (e.g. altegr) and select account:
Page 236
M0125ANA.DOC
Note:
The
domain
security policy is
not affected by
these
settings;
"Store passwords
using reversible
encryption" is still
disabled for all
other users.
Page 237
13.1.2
The User Account can be added as local user on the A.I.M.O.S. machine or as a
domain user on the windows domain server. This is described in the following
chapters.
13.1.2.1
In case of an A.I.M.O.S system that is not part of a windows domain, the dial-in user
must be added as a local account. If the A.I.M.O.S system is part of a windows
domain, the dial-in user can be added locally as described in this chapter or as a
domain user (ref. to next chapter 13.1.2.2).
The user configuration can be opened as follows: Right click on My Computer
Manage.
The following window will appear.
M0125ANA.DOC
On the domain server the domain user configuration can be opened as follows: Right
click on My Programs->Administrative Tool->Active Directory Users and Computers.
The following window will appear:
Page 240
M0125ANA.DOC
Press Finish.
Active Directory Users and Computers, New User (2) and New User (3)
Page 241
Active Directory Users and Computers, Account (left) and Dial-in (right)
This finishes the domain user configuration.
The RAS service shall be enabled via the Windows Routing and RAS service.
Incoming Connections, which are configured via the Settings->Network and Dialup
Connections, have to be removed before.
13.2
13.2.1
Page 242
M0125ANA.DOC
RRAS (2)
13.2.2
Select
Remote access server
Page 244
M0125ANA.DOC
RRAS, Completing the Routing and Remote Access Server Setup Wizard
13.2.3
Open the RRAS server configuration via Start Programs Administrative Tools
Routing and remote access.
Page 245
Only check
(CHAP)
Encrypted
authentication
RRAS, IP
Page 246
M0125ANA.DOC
RRAS, Ports
In the left window select Ports, do a right-mouse click, and select Pproperties.
Select the device to be used for RAS
Configure Device
Page 247
13.2.4
RRAS Policy
RRAS, policy
The RRAS Policy Wizard starts:
Press Next.
Page 248
M0125ANA.DOC
RRAS Policy Wizard: Policy Conditions (left) and Select Attribute (right)
Ensure that the permission is granted at
any time and click OK.
RRAS Policy Wizard: Time of day constraints (left) and Policy Conditions (right)
Ensure that Grant remote
permission is selected.
access
Page 249
RRAS Policy Wizard, Edit Dial-in Profile: Dial-in Constraints (left) and IP (right)
In the Authentication tab, ensure that
ONLY Encryption authentication
(CHAP) is selected.
RRAS Policy Wizard, Edit Dial-in Profile: Multilink (left) and Authentication (right)
Page 250
M0125ANA.DOC
RRAS, policy wizard, Edit Dial-in Profile, Encryption (left) and Advanced (right)
Click Finish to complete the Policy Wizard.
Page 251
13.3
The following chapters contain the descriptions for setting up a remote access
server. The screenshots displayed may be slightly different depending on the
operating system language settings and version of the operating system.
13.3.1
Click Next.
Page 252
M0125ANA.DOC
Click Install.
Page 253
13.3.2
RRAS Server Configuration Wizard
Use the following steps to configure and enable the Routing and Remote Access
service:
Click Start, Administrative Tools, Routing and Remote Access:
By default, the local computer is listed as a server. Right-click the server, and then
select Configure and Enable Routing and Remote Access:
Page 254
M0125ANA.DOC
Click Next.
Page 255
Page 256
M0125ANA.DOC
Select New
Add IP address.
Select Next.
Page 257
Click Finish.
Click OK, click Start service, and then click Finish.
Page 258
M0125ANA.DOC
13.3.3
Open the RRAS server configuration via Start Programs Administrative Tools
Routing and remote access.
Page 259
Only
check
Encrypted
authentication (CHAP)
RRAS, IP
Page 260
M0125ANA.DOC
RRAS, Ports
In the left window select Ports, do a right-mouse click, and select Properties.
Configure Device
Page 261
13.3.4
Network Policies
M0125ANA.DOC
Confirm with
Next.
Page 263
Page 264
M0125ANA.DOC
Page 265
13.4
The procedure described in this chapter is not a mandatory installation step, but
allows verifying that the configuration of the RAS server was successful.
An extra modem is required to run this procedure. The extra modem is configured for
a dial out connection and connects to the RAS server. The two involved modems can
be installed on the same or on different computers.
13.4.1
For setting up the dial-out connection, open the Network connection window (Start>Settings->Network Connection). Start the New Connection wizard.
Network Connections
Page 266
Select a name
connection.
for
this
Page 267
Page 268
M0125ANA.DOC
Page 269
13.4.2
connection
M0125ANA.DOC
Page 271
In the Networking tab select the Internet In the Internet Protocol Version 4
Protocol Version 4 (TCP/IPv4) and (TCP/IPv4) Properties set the tags as
shown below and click Advanced:
choose Properties:
In the Advanced TCP/IP Settings set the tags as shown and set the Interface Metric
to 1:
Page 272
M0125ANA.DOC
14.1
CERTIFICATE SELECTION
The recommended way to select the certificate is to use the Security Alert of the Web
tab card as explained on the next page. It is, however, also possible to select the
certificate via the Internet Explorer. To do so, choose Continue to this website (not
recommended) when the first-time connection to the NE is not successful.
Click Certificate Error to continue.
Page 273
CERTIFICATE INSTALLATION
Note: For remote A.I.M.O.S. clients it is necessary to import the certificate at each
client machine (per Windows user: standard import; or for all users: import to 'Local
Computer' store).
Page 274
M0125ANA.DOC
Browse
to the Trusted Root Certification Authorities and tag Show physical stores to
display the Local Computer directory to install the certificate there. Otherwise the
certificate will be installed to the default Registry directory and will only be available
for the current user:
Choose the Local Computer
directory to make certificate available
for all Windows user accounts of the
machine including the 'Local System
account' which is the logon account
used by the A.I.M.O.S. Connector
service (that actually performs the
HTTP upload requests during the
corresponding schedules).
Click OK to continue.
Click Yes if presented with the following warning.
Page 275
Page 276
M0125ANA.DOC
15 Index
15 INDEX
? Menu ................................................................. 99
A.I.M.O.S.
Backup/Restore Database ..................... 205, 206
Components .................................................... 19
Main Program .................................................. 91
Rights .............................................................. 72
Validate.......................................................... 208
Visu Version Info.............................................. 99
Account Management........................................... 70
Account Manager ................................................. 67
NE Owner ........................................................ 79
Organizations................................................... 69
Roles ......................................................... 70, 76
Users ............................................................... 77
Accounts, Enable............................................ 45, 78
ACK Capability ..................................................... 84
Actions, Scheduler.............................................. 158
Adapter, OMC 3.54......................................... 72, 88
Add
Folder ............................................................ 123
License ............................................................ 40
New Network Element ........... Look Up New NE
Administrator Role .......................................... 72, 76
AgentSim ............................................................ 213
Alarm
Forwarding....................................................... 70
Help ............................................................... 127
History ........................................................... 127
Latency .......................................................... 133
Limiter .............................................................. 42
List ................................................................. 126
Polling .............................................................. 87
Polling, Settings ............................................... 59
Profiles................................................... 196, 199
Representation ................................................ 59
Settings............................................................ 57
Severities ....................................................... 133
Thresholds ..................................................... 134
Type................................................................. 57
Alarms
Alarming Enabled ............................................ 96
Export ...................................................... 93, 126
External.......................................... 121, 122, 132
Flash .............................................................. 186
Import .............................................................. 94
Message ........................................ 112, 116, 120
Port Assignment ............................................ 120
Query ..................................................... 123, 161
Recognize, Select All....................................... 98
Text in Extra Line............................................. 97
Alternate SNMP Agent, IP Address / Port ............ 49
Andrew OMC 3.54 ................................................ 88
Any New Network Element ................................. 108
Assigned Folder, Role .......................................... 78
Auditory Alarm Notifications ................................. 89
Automatic Backup................................................. 89
Backup/Restore
Database ......................................... 89, 205, 206
NE Configuration ........................... 125, 136, 159
Server Configuration Tool Settings .......... 39, 207
CC Concatenator.................................................. 70
ComasTest ......................................................... 215
CommScope........................................................... 9
Configuration
A.I.M.O.S. .................................................39, 205
Alarm System ................................................ 160
Connectivity ................................................... 138
Data ............................................................... 125
Dial-In ............................................................ 139
Dial-In Server................................................. 235
Email Forwarding............................................. 51
File, Send ...................................................... 161
File, Upload ................................................... 162
Function......................................................... 128
GPS-Based.................................................... 132
Group Profile, Select...................................... 107
Group Profile, Set .......................................... 198
LDAP ............................................................... 46
Modem......................................................24, 231
Port ................................................................ 120
Remote Access / RRAS Server Win2003 ...... 242
Remote Access / RRAS Server Win2008 ...... 252
Server .........................................................23, 39
WEB Server................................................... 146
Configuration Tool .. Look Up Server Configuration
Connectivity........................................................ 128
Connectivity Management .................................... 70
Connectivity Manager........................................... 61
Modem Management....................................... 61
Modem Properties, Settings ............................ 62
Modems (Discover, Groups) ............................ 63
Profiles............................................................. 64
Wireless Status................................................ 62
Connector Logs .................................................... 98
Contact Addresses ....................................10, 11, 12
Coordinated Universal Time ................................. 70
Create Export ..................................................... 175
Create Performance Data Chart......................... 172
Database Administration Tool ............................ 205
Database Version Info .......................................... 99
Declaration of Conformity ....................................... 9
Default Port, Outgoing SNMP Traps .................... 49
Email .................................................................... 52
Enable, Accounts ............................................45, 78
Event Triggered Actions ..................................... 159
Excel Export ......................................................... 93
Alarm Data..................................................... 188
Alarm List....................................................... 126
Alarm Profile Settings .................................... 200
Backup List, HID ............................................ 136
Job List .......................................................... 180
Logs (Visu Logs).....................................138, 182
NE List ........................................................... 179
Notes ............................................................. 138
User Data ........................................................ 80
Export
Create............................................................ 175
NE Backup to File ............................................ 94
Profiles........................................................... 201
Users ............................................................... 80
via ODBC......................................................... 88
XML File .......................................................... 93
External I/Os....................................................... 132
External Tools
Profiles........................................................... 202
Extras Menu ......................................................... 98
Page 277
Page 278
M0125ANA.DOC
15 Index
Password
Lockout Settings .............................................. 45
Node A(M) ..................................................... 172
Settings...................................................... 44, 45
Performance Data Chart, Create ........................ 172
Performance Data, Read .................................... 171
Performance Manager ........................................ 186
Preferences Editor................................................ 57
Alarm Polling, Settings..................................... 59
Connectivity Pages .......................................... 58
Scheduler Settings........................................... 58
Severity Icons .................................................. 59
Private SNMP Community Name ......................... 49
Profiles ............................................................... 196
Query Alarms.............................................. 123, 161
Query All............................................................. 124
RDN.................................................................... 230
Concatenator, Separator, Translation.............. 70
Read Only User Role............................................ 76
Read Performance Data ..................................... 171
Recognize Trap .................................................... 84
Removing NEs from the Map.............................. 185
Replace, System ................................................ 161
Restore ...........................Look Up Backup/Restore
Revision Info....................................................... 136
Rights, Account Manager ..................................... 70
Roles .................................................................... 76
Account Manager............................................. 70
Administrator.................................................... 76
Standard User.................................................. 76
RRAS Policy Win2003........................................ 248
RRAS Server Properties Win2003...................... 245
RRAS Server Properties Win2008...................... 259
SASL .................................................................. 230
Login ................................................................ 53
Scheduler ........................................................... 148
Actions ........................................................... 157
Connectivity Settings ..................................... 150
Create Performance Data Chart .................... 172
Customize Actions ......................................... 152
Customize Network Elements........................ 151
Customize Schedule...................................... 149
File Upload..................................................... 162
Read Performance Data ................................ 171
Software Update ............................................ 166
XML Import .................................................... 153
SDN.................................................................... 230
Select New NE ........................... Look Up New NE
Server Configuration............................... 23, 39, 207
Severity Colors ..................................................... 57
Severity Icons ....................................................... 59
Show Alarm Help.......................................... 99, 126
SMPP ........................................................... 53, 230
SMPP-Gateway .................................................... 53
SMSC ........................................................... 53, 230
SMS-Connected NE, Add ................................... 119
SMTP ................................................................... 51
SNMP
Agent ..................................................48, 81, 203
Agent Shutdown Delay .................................... 49
Alarm Forwarding .......................................70, 81
Alarm Traps ..................................................... 81
Alternate Agent IP Address, Port ..................... 50
GUI ................................................................ 203
Manager Settings............................................. 81
MIB Version Info .............................................. 99
Northbound...................................................... 48
Outgoing Traps................................................ 48
Private Community Name................................ 49
Traps ............................................................... 70
UDP ................................................................. 48
V2C.................................................................. 70
Software Update................................................. 166
Sort Options ....................................................... 104
SRMU..........................................................229, 230
Standard User Role .............................................. 76
Status Bar........................................................91, 92
Supervision Tab ................................................. 126
System Off Duty, Clear....................................... 161
System Replaced ............................................... 161
Table Filters........................................................ 103
Technical Support .............................................. 224
Test Tools........................................................... 213
Test-Trap.............................................................. 81
Time Format ......................................................... 70
Time Schedule Option ........................................ 148
Tools Menu........................................................... 95
Trap
Forwarding....................................................... 81
Info, Legacy Trap Info...................................... 70
Recognize........................................................ 84
SNMP .............................................................. 70
TrapMonitor ........................................................ 216
Traps/Notifications................................................ 81
Tree View ...................................Look Up NE Tree
Update A.I.M.O.S. / From File .....................209, 210
Uplink Connection Parameter............................. 110
User Data, Export ................................................. 80
User Name ......................................................77, 92
Users Import/Export.............................................. 80
UTC ...............................................................70, 230
Validate, Database ............................................. 208
Vector Map ......................................................... 182
Version Info .......................................................... 99
View.................................................................... 186
Menu................................................................ 97
Runs .............................................................. 149
Visu Logs...............................................60, 138, 225
Visu Version Info .................................................. 99
WatchDog
Client Window.................................................. 35
Tool................................................................ 186
WEB Server Configuration ................................. 146
Windows Menu..................................................... 99
Workshift Assignment........................................... 85
Workshift Settings ................................................ 81
XML Import, Export .......................................93, 153
Zoom In, Out ...................................................... 182
Page 279