Академический Документы
Профессиональный Документы
Культура Документы
Sachin Bhagat
Mumbai
Phone:022-767474747
Email:schinbagt908@rediffmail.com
Brief description:
Work Scope
Experience of controlling welding/ QA/QC department carrying out work for Oil & Gas/
Power, Marine industry. Experience of Offshore, Onshore, Civil projects, Pipe work,
Structural and Pressure vessels.
Good knowledge of Welding QA/QC, NDT/NDE processes, standards and procedures and
Technical knowledge of Materials used for Offshore/ Marine and open cast applications.
Qualifications
Employment History
July 09 Present: MS Construction Company,Dubai
Welding and QA/QC Superintendent.
Responsible for health and safety, tool box talks and safety audits/walk rounds with the
client.
Supervising the quality department and approving all QA/QC documents for the project.
Witnessing the Qualification of the PQR's and supervising the process to TPA.
Writing WPS for the project, Piping and structural.
Ordering consumables and equipment for the set up of the pipe shop and start
of fabrication.
Overseeing the whole welding phase of the project, managing supervision, inspection
personnel.
Visiting sub contractor sites to monitor progress, quality and safety practices.
Keeping all welding documentation valid and up to date to AWS, ASME IX and EN ISO
15614 specifications.
Compiling WPS, WPQR and WQR and witnessing welder qualification tests.
Liaising with external NDE sub contractors on contract requirements and specifications.
Advising other departments on materials selection and fabrication issues. Root cause
analysis of welding defects.
Monitoring sub contractors progress, checking welding, NDE procedures and inspection
of finished product.
Oct 07 Feb 08: Mechlac Construction Compant,Qatar
Welding QA/QC Inspector.
Implementing Welding and pipe work Q. A system on the new build Lakeside, 'Energy
from Waste' powerstation.
Compiling the weld map for the project. Updating the Welders Register.
Jan 07 Aug 07: Prodynamic Constructions, Qatar
Steel Section Manager
Managing/ coordinating the workload on the 11.5 million 'Western Spirit' seismic vessel
project
.
Monitoring of the project to ensure facilitation of continuous improvement and Planning
and coordinating activities carried out by all trades and disciplines.
Working with the clients Superintendents and Project Managers to solve any problems
that arise during the projects.
Ensuring that all work is carried out safely and according to the companies Quality,
Health & Safety policies and procedures.
June 06 Jan 07: Almech Construction, Sharjah,UAE
Welding Supervisor/ Inspector.
Ensuring the pipe spools were complete and ready on time to meet the demand
of the project schedule.
Responsible for supervising all structural welding carried out in the vessels
existing engine room and also on two new engine rooms.
Ensuring that all work is carried out safely and according to the companies
Quality, Health & Safety procedures.
July 05 Jun 06: Dubai Naval dockyard
Welding/ Fabrication Supervisor/ Inspector.
Personal Details:
Fathers Name:
Date of Birth: 6-09-1979
Passport No.:
Passport Issue date:
Job Objective:
To execute my skills and experience in ensuring the safety and quality of welding
projects working as a welding inspector.
Summary of Skills:
Ability to distribute tasks appropriately as per the competencies and skills of the
welders
Education:
Welding Inspection Certification
Mathew's College, Saratoga, Wyoming
2008
High School Diploma
Novelty High School, Saratoga, Wyoming
2007
Work Experience:
Certified Welding Inspector
Horizon Inc., Saratoga, Wyoming
2010 - present
Ensuring the safety and quality of welded work in all types of structures
Inspecting flaws and cracks that can hamper the safety of welded structures
Using flashlights and magnifying glasses in ascertaining the welding strength and
identifying cold welds and undercuts
Inspected the installation and fabrication of water tank, gas tank and water
systems
Worked in the construction of a sludge pit, and 8" drain line connecting the tank
to the sludge pit
Achievements:
Awarded for maintaining superior quality and safety of the Boston Welding Project
undertaken by CWY Constructions Ltd.
Appreciated by the New York State Construction Association for coming up with new
effective welding techniques
Affiliations:
Affiliated with the Washington State Welders' Association
Member of the Boston Welders Union
References:
Garry Y. Timberland
Senior Welding Engineer
Bold Constructions Pvt. Ltd.
133M, Timber View Avenue
Chrisman, IL 87609
Phone No: (097) 698 9059
Email: garry@tiberlandmail.com
Gracie W. Walker
Senior Welder
Gallant Welding Association
34J, West Whitish Boulevard
Chenoa, IL 47890
Phone No: (578) 908 9609
Email: gracie@walkermail.com
Education: 2
Experience: 11 years
Relocation: Yes - Internationally
Career Objective
I intend to apply for the post of SENIOR QA/QC - WELDING INSPECTOR for STRUCTURE and PIPING in your esteemed
Organization
Professional Experience
I intend to apply for the post of SENIOR QA/QC - WELDING INSPECTOR for STRUCTURE and PIPING in your esteemed
Organization.
I have Two and half years experience as a Senior Welding Inspector(As a client representative) with one of the leading drilling
companies, in Singapore. Five years experience in Marine and Offshore welding inspection field as a Welding inspector and
Four and half years exp in NDT Inspections as a NDT Inspector. (Total 11 Years Experience in this field)
Throughout my carrier, I have been known as a quick learner, self-starter, and a dedicated worker. I have demonstrated my
ability to handle a variety of tasks effectively and deliver on deadlines. Although I work well independently, I equally enjoy
being a part of a team.
My objective is to find a challenging and growth oriented position on Offshore and Marine industry in to inspecting and coordinate the New construction & conversion projects to follow OWNER & CLASIFICATIONS RULES AND REGULATIONS.
This related areas that would best utilize all aspects of my skill set.
I am convinced that I can make an immediate contribution toward the growth of company, and would hope that we may
explore this opportunity further. Please contact me, at your convenience, to further discuss my background.
Eductation
ACADAMIC PERFORMANCE
DIPLOMA IN MECHANICAL ENGINEERING
Muthiah polytechnic, Chidambaram (India)
Passed in April V 1996
Certification
WELDING INSPECTION QUALIFICATION
Certified Welding Inspecton V CSWIP 3.1
Passed in V 24 Dec 2003
Date of expiryV 23 Dec 2008
Certificate no V 13748
NON DESTRUCTIVE TESTING QUALIFICATIONS
PCN Level II in
Ultrasonic Testing (3.1 & 3.2)
ASNT Level II in
Ultrasonic Testing (UT)
Liquid Penetrant Testing (PT)
Magnetic Particle Testing (MT)
Radio graphic testing (RT)
Additional Information
Basic Duties & Responsibilities: Review contract specification / technical requirements , drawings etc
Review Inspection & test plans in accordance with International codes and Client Specification
Review Project Weld drawing , weld and NDT map and welding Procedure Specification
Review and witness WPS , PQR , Welders & Welding Operator Qualification
Review and control the fabrication activities as per the ITP / Contract Specification / codes and Approved Drawing
Executing inspection and control of RAW materials , welding consumables
Execute Welding ,NDE Inspection Radiographic film interpretation
Overall quality control project responsibility such as interaction and
Co-ordination with clients , design planning , projects production, welding
& NDT In Process inspection verification stage from material Identification.
Perform Surveillance during inspection to verify compliance with specified
yard procedure including preheat, inter pass temperature control and post heat
re-quirements
Witnessing of dimension check for completed weld as per drawing and
Specification
Review of NDT reports and Witness of NDT Inspections
Witnessing of piping chemical flushing where ever required (Ex). Portable water Tanks.
Witnessing Hydro testing of Piping system and Tanks and pressure
Ref #
Year of birth
112368
1971
Current Location/Address
City or Town
Country
Chennai
India
Permanent Location/Address
City or Town
Country
Chennai
India
Languages
Primary Language
Hindi
Secondary Language
English
Fluency
Read, write and speak fluently
Fluency
Fluent
Nationalities
Nationalitiy
India
Experience Classification
Job Function
Years
Exper
ience
General and
Operations Managers
Civil Engineers
Inspectors, Testers,
Sorters, Samplers,
and Weighers
10
Job Industry
Years
Exper
ience
Engineering
10
Manufacturing,
Operations, Industrial
10
19
Qualifications
Highest Qualifications
HND/Diploma
Qualification
Subject
Establishment/Country Year
HND/Diploma
Mechanical engineering
Dept.of
Tech.Education/India
Trade
Qualification
API 510, CSWIP 3.1, WELDING INPSECTOR, API/ASNT-USA & TWINDT LEVEL - II IN UT,T,MT,PT,RT
U.K
1991
1998
Work Locations
Availability
Start Immediately?
Not available now.
Employment History
Summary
A Mechanical engineering professional with team building and leadership qualities, 19 years extensive experience in Vendor
Inspection, On site Welding & Fabrication, Material, ISO 9001-2008 QMS audits and Third party inspection & Certification;
turn around / Shut down in Refinery, Petrochemical, Oil & Gas Sector.Having sound knowledge and educational background
in API, ASME, ASNI, ASNT,BS & TEMA and also well acquainted in NDT, welding inspection, pressure Vessel inspection &
Rotary equipments.
* Inspection of Oil & Gas field and Petrochemical plant static & rotary equipments and associated piping in on-stream,
maintenance, shutdown and ATA inspection.
* Oil & Gas field, Off-shore platforms and Petrochemical plant - inspection scheduling based on criticality rating, corrosion
looping and history of all static equipment.
* Inspection of all types of Oil & Gas, refinery, Off-shore and petrochemical plant static equipments (columns, drums, heat
exchangers, furnaces, boilers, flares, tanks and piping) and to compiles written reports on its findings and recommendations
puts in repair recommendations to user departments.
* Installation and alignment inspection of Oil & Gas, Refinery and Petrochemical Plant rotary equipments like as Pump,
Compressor, Generator, Package units, etc.,
* Keeping all inspection equipment history files up-to-date and also keeps on-stream inspection data current.
* Inspects and assesses the condition of Oil & Gas field, Refinery and Petrochemical Plant static equipments at the required
frequency in accordance with the company's procedure and code requirements.
* Inspects the structure modification for Oil & gas field, Off-shore and Petrochemical plant static equipments and associated
pipings, supports etc., in accordance with company procedures / specifications.
* Inspection on Oil & Gas Field, Off-shore, Refinery and Petrochemical plant steel structure, gratings, roofing and schedule
inspection basis of as per schedule/offer.
* Advises and recommends required repairs or replacements to defective Oil & Gas field, Off-shore and Petrochemical plant
static equipments and carries out further inspection after repair work to ensure conformity to approved standards and codes.
* Inspection of all types of valves like ball valve, gate valve, plug valve, globe valve, needle valve and PSV,s etc.,
* Carries out other related duties such as updated of new technical methods of inspection, especially in the field of NDT etc.,
* Direct, advice and instruct NDT Technicians in the recommends of specific examination and performance of routine duties,
evaluate inspection and NDT results and prepare reports with recommendation regarding potential repairs, fitness for
service and anticipated equipment residual life.
* Monitor and inspect quality of piping fabrication and installations, including witness of pressure testing and application of
Painting and Insulation.
* Perform and evaluate the result of on-stream service including piping corrosion programs.
* Inspection and certification of all forms of lifting tackles and lifting machines etc.,
* To follow up and maintain the safety systems and regulations at all the time.
* Plans and progresses workload of assigned personnel and the follow up of the progress achieved.
* Checks and approves inspection and contractors services
*Associated with Saudi Aramco approved vendor Inspector for Valves, Fittings & Pressure vessels (SAP no: 70008887)
*Conversant with good working knowledge in the frequent use of International codes & standards such as ASME, ASTM,
AWS, API,TEMA, BS & NACEMR0175 etc.
*Familiar with International Client specifications - Shell, Bechtel, Saudi Aramco, John Brown, Foster Wheeler, KNPC etc.
*Associate with many International Inspection agencies to execute their assignments in India. (Campbell associates, U.S.A,
B.I.E., U.K, 2R Raveena, Italy, NDE Technical services GmbH )
*Witnessed Special Leak tests such as Low Temperature testing Cryogenic testing and Fugitive Emission testing etc.
*Safety Courses from Major refinery /Petrochemicals/GGS like SAUDI ARAMCO, GNPOC AND RPL
*Thorough knowledge and experience of radiographic testing, ultrasonic testing, DPT and magnetic particle testing
techniques used in the process of inspection. ASNT NDT Level-II
*Obtained training in safety requirements at oil & gas installations
* Experience in Conducting Vendor Evaluation
Work Experience
WORK EXPERIENCE
1. SUMMARY OF CAREER (in reverse chronological order): Total 19 years as below:
********************************************************************
1.Company: M/s.Al-Madar industrial for technical services (MIT, Yanbhu Al-Sinaiyah, KSA.
Industry : Oil, Gas, Petroleum, Refinery & Power engineering
Position : Inspection engine
Period : February 2011 to till date
TURN AROUND INSPECTION / YANBHU PETROLEUM LIMITED, SAUDI ARABIA.
Inspection of static equipment including piping, heaters, Columns, vessel and heat exchangers
To determine fitness for service condition, determine extent and significance of equipment corrosion /wastage and general
deterioration.
Review of ultrasonic thickness gauging reports and NDT (MPI/PT/IRIS/ECT/RFET) reports.
Maintain a repetitive inspection program using RBI analysis during Annual Turn Around inspection to identify frequency,
extent, corrosion rates and remaining life analysis of all piping and equipments
2. Company : M/s. Baxcounsel Inspection Bureau (pvt) Limited. india
Industry : Oil, Gas, Petroleum, Refinery & Power engineering
Position : Senior engineer
Period : April 2003 to Feb. 2011
AAA. Turn around & Shut down projects / Client summery
*QUALITY YIELD IMPROVEMENT PROJECT (SHUT DOWN) / RELAIANCE PETRLEUM LIMITED, JAMNAGAR, INDIA
Inspection of repair & alteration of Pressure vessels along with Piping as per API 510 and Modification of in-service piping
system as per API 570.
Monitoring, repair procedures, surveillance checks in NDT methods.
*201- CDU / HCU - III Plant shutdown in Refinery III. / Chennai Petroleum Corporation Ltd (CPCL), Manali, Chennai.
Inspection of static equipment including piping, heaters, vessel, heat exchangers and storage tanks.
To determine fitness for service condition, determine extent and significance of equipment corrosion /wastage and general
deterioration.
*FCCU-II Shut down Project / BPCL Mahul Refinery Mumbai
*RMP (NHGU/HCU/LOBS) Shutdown Project / BPCL Mahul Refinery Mumbai
Performed Corrosion survey /monitoring of all piping and vessels in the plant.
To prepare inspection report based on the inspection findings and to recommend & implement repair /reclamation
/replacement program.
Responsibilities:
*Perform internal, external Visual and NDE inspections of pressure vessels, towers, heat exchangers, piping, tanks, heaters
and other miscellaneous equipment to determine the condition of the refinery asset.
*Maintain a repetitive inspection program using RBI analysis during Annual Turn Around inspection to identify frequency,
extent, corrosion rates and remaining life analysis of all piping and equipment.
*Maintain PMI program on alloy materials to ensure proper material selection and field application
*Approve hydrostatic, pneumatic, and in service testing of vessels, piping and tanks for both new construction and post
repairs
*Advise and offer mentoring opportunities to junior inspectors and technicians
*Coordinate with unit Mechanical and Process Engineers, contractors, maintenance and operations personnel as required
on various matters, including inspection code requirements, condition of equipment, recommendations on repairs and quality
of workmanship
*Carry out examination and testing at all identified stages of repairs and modification as per API 510, API 570 & Applicable
Project specifications.
*Review of ultrasonic thickness gauging reports and NDT(MPI/PT/IRIS/ECT/RFET) reports.
*Approve hydrostatic, pneumatic, and in service testing of vessels, piping and tanks for both new construction and post
repairs
*Ensure that all documents are kept up dated and are traceable involved in inspection of Heat exchangers, columns,
Storage tanks and Pressure vessels.
Onshore & Offshore projects &Vendor inspection & Site construction projects / Clients summery
*DHIRUBHAI 1 & 3 Field Development Project, KG-D6 (KG-DWN-98/3) Deep Water Block.
Pipe Lay Vessel: Allseas D.L.B. - Lorelay, Audacia & Tog Mor.
Project Location: Krishna Godavari Basin on the East Coast of India in Bay of Bengal., India
Monitor for all QA/QC Welding & Coating activities of Allseas (CONTROCTOR) in Offshore and reports directly to the
Senior Representative of Reliance Industries Ltd.
*JAMNAGAR EXPORT REFINERIES PROJECT ON SHORE / RELAINACE PETROLEUM LIMITED, JAMNAGAR,
GUJARAT, INDIA
Effective as proficient for Quality Management Department in the Jamnagar Refineries.
Meticulously manage inspection and quality management designed for the newly constructing Jamnagar Export Refineries
Project (JERP)
Implicated in Crude Distillation and Vacuum Distillation Unit for the inspection of quality spearheading the team for swift
completion of the project by May 2008. It involves the AG, UG, Structural Tanks, Refractory and exchangers Inspection for
Quality as per Inspection and Test plan and Becthel France Specification
*ACT/WCT/GOX VESSEL PROJECT / Goyal MG Gases Private Limited.
Dedicated to total quality of manufacturing of pressure vessels from material identification to Pressure testing as per ASME
SEC.II, SEC.V, SEC. VIII & SEC IX.
*KARAN UTILITIES COGENERATION PROJECT / SAUDI ARAMCO
Approved Saudi aramco inspector for inspection of valves (Gate, Globe, Check & Control) : nearly 8000 valves inspected
of various sizes at Audco India Ltd, Chennai, Advance valves, Noida,, Virgo valves, Pune, India
*DOLPHIN OFF SHORE PROJECT / JAPAN GAS CORPORATION
Approved Welding inspector to witnessed Qualification testing of Welders in various parts of India (Approx.-1000 nos of
welders)
*JUBAIL CHEVRON PHILIPS PROJECT / JAPAN GAS CORPORATION
Resident Inspection Engineer SPIC JEL Construction LTD, Chennai and Involved in inspection of Reformer, Process Gas
Boiler, Mixed feed Pre heater, steam super heater, Fuel gas filter, Economizer, Fuel gas fan, Steam drum, Stack, Inlet-Outlet
Ducts.
*UPPER EGYPT ELECTRICITY PROJECT / CMI BELGIUM
Expediting Gate, Globe and Check Valves (Electric & Pneumatic Actuator Valves) , Qty-1000 nos at Audco India Ltd,
Chennai, India
*MANIFA OFF SHORE PLATFORM PROJECT / SAUDI ARAMCO
Inspection & Expediting of Gate, Globe & Check valves at Audco India Ltd, Virgo valves & Advance valves, India as per
API / ASME & BS Standards.
*VARIOUS PROJECTS / RELIANCE GROUP OF INDUSTRIES
Inspection & expediting of reactors, pressure vessels, heat exchangers, columns, separators, reactors, LNG Vaporizers,
skid equipments, pumps, valves (Control valves, Globe valves, Check valves, Gate valves, Air-operated valves, etc)
*12 GAS PIPELINE OF 7 KMS INCLUSIVE OF ALL STATION PIPING, KG BASIN, KAKINADA / GAS AUTHORITY OF
INDIA
Inspection of cross country pipeline during fabrication, laying and testing as per API 1104 standard
*CONSTRUCTION OF 4 Nos X 1200 MT LPG MOUNDED BULLETS / I.O.T.L
Involved in Mechanical stage wise inspection of Mounded Storage Vessels at CPCL, Manali site, Chennai, India
*NUOVO PIGONE ITALY / GE OIL
Approved Inspector/Expeditor for inspection of Exhaust Lateral / Horizontal Duct system at Indira Industries, Ranipet, India
*NCP, BAPCO BAGRU, DOLPHIN, JCP, RABIGH, SGP PREFURN, TANGGUH, CSPC NANAHAI / JAPAN GAS
CORPORATION
Approved dedicated inspector for inspection of valves (Gate, Globe, Check & Control): nearly 50,000 valves inspected of
various sizes.
Responsibilities:
*Reviewing the Manufacturers Inspection Test plans as per ASME Code and project specification. (Pressure vessels, Heat
Exchangers, columns, structural steels, Valves, Pumps, skid package, piping materials, items etc.)
*Review of WPS, PQR & Welders Qualification as per ASME code and project specification.