Академический Документы
Профессиональный Документы
Культура Документы
Engineering Department
Axium Power
Software under OS
Windows 7
Date:12/23/10
NUM INFORMATION
US N 180
1/17
NUM Corporation
603 East Diehl Road, Suite 115
Naperville, IL 60563-1477 USA Web:
Phone: 630-505-7722
Fax:
630-505-7754
www.num.com
Axium Power
Software under OS
Windows 7
Date:12/23/10
NUM INFORMATION
US N 180
2/17
a)
b)
Note: Selecting either of the above will load in the Drivers Manager
before the driver.
3. On the message Pending Schneider Driver Manager for Vista32 Click
Install
4. Follow the on screen prompts
5. Drivers will install with no Finish notification! Restart PC
Phone: 630-505-7722
Fax:
630-505-7754
www.num.com
Axium Power
Software under OS
Windows 7
2.
Date:12/23/10
NUM INFORMATION
US N 180
3/17
Phone: 630-505-7722
Fax:
630-505-7754
www.num.com
Axium Power
Software under OS
Windows 7
NUM INFORMATION
US N 180
Date:12/23/10
4/17
11. User Licence PLCTool and SETTool page: lease enter User Name /
Company Name / User Licence click Next to continue.
12. Select Program Folder screen page: click Next for default location
(Location can be changed if necessary).
13. Select communication and driver installation screen page: Please select
the desired communication (Com serial link is default). Then click Next to
continue.
NUM Corporation
603 East Diehl Road, Suite 115
Naperville, IL 60563-1477 USA Web:
Phone: 630-505-7722
Fax:
630-505-7754
www.num.com
Axium Power
Software under OS
Windows 7
Date:12/23/10
NUM INFORMATION
US N 180
5/17
14. Select language screen page: select Desired Language click Next to
continue.
15. Information of installation screen page: click Next to continue.
16. Setup Status screen page: leave as software is configured.
17. DllRegisterServer in C:\Program Files\CommonFiles\microsoft
shared\DAO\dao350.dll succeeded.
When message is displayed just click click OK to continue
18.
SYSTEM UPGRADE
Machine Manager required Borland Database Engine
Would you like to install Borland components?
When message is displayed just click Yes to continue
NUM Corporation
603 East Diehl Road, Suite 115
Naperville, IL 60563-1477 USA Web:
Phone: 630-505-7722
Fax:
630-505-7754
www.num.com
Axium Power
Software under OS
Windows 7
NUM INFORMATION
US N 180
Date:12/23/10
6/17
XIP-Driver Setup
Setup the CNC Parameters with PC Standard MMI (Apex).
The XIP driver uses the following NC parameters:
P100 N1 - XIP Xway address =
3F (Hex)
P124 CNC TCP/IP Address =
192.168.0.254
P125 CNC Subnet Mask
=
255.255.255.0
P100 N1 corresponds to the Station Address in Step 3 below. Range is 0 to 3F Hex (0
to 63 decimal)
Setting of the PC Network Adaptor:
IP address
= 192.168.0.150
Subnet Mask
= 255.255.255.0
Remark: The above values for parameters and Network settings are example values only.
1. Power up CNC Connect PC to CNC TCP/IP adaptor with a Cross (X) network cable.
2. Set-up the Network Adaptor Settings
(Control Panel > Network and Internet > Network and Sharing Centre > Change Adaptor
Settings)
In the below example IP Version 4 is modified.
At this point it is possible to ping the CNC from the PC i.e. ping 192.168.0.254 and
check response.
NUM Corporation
603 East Diehl Road, Suite 115
Naperville, IL 60563-1477 USA Web:
Phone: 630-505-7722
Fax:
630-505-7754
www.num.com
Axium Power
Software under OS
Windows 7
NUM INFORMATION
US N 180
Date:12/23/10
7/17
7. Click Configuration This will display Schneider Drivers Management Properties :Select XIP Driver Tab.
NUM Corporation
603 East Diehl Road, Suite 115
Naperville, IL 60563-1477 USA Web:
Phone: 630-505-7722
Fax:
630-505-7754
www.num.com
Axium Power
Software under OS
Windows 7
NUM INFORMATION
US N 180
Date:12/23/10
8/17
Click OK to continue
This will then display New XIP profile creation
NUM Corporation
603 East Diehl Road, Suite 115
Naperville, IL 60563-1477 USA Web:
Phone: 630-505-7722
Fax:
630-505-7754
www.num.com
Axium Power
Software under OS
Windows 7
NUM INFORMATION
US N 180
Date:12/23/10
9/17
Under TCP/IP Network Adaptor drop down box select the required Adaptor and click
OK
(Note TCP/IP Address of PC as set in Step 2. in this example 192.168.0.150)
Phone: 630-505-7722
Fax:
630-505-7754
www.num.com
Axium Power
Software under OS
Windows 7
Date:12/23/10
NUM INFORMATION
US N 180
10/17
12. Click Save Message The new configuration has been saved successfully click OK
13. Under XIP menu bar Select Reset This Resets the XIP driver.
(or Stop then Start)
14. Under Test menu select ICMP Ping > Select Ping
15. Close all windows and reboot PC and CNC Important to do this.
NUM Corporation
603 East Diehl Road, Suite 115
Naperville, IL 60563-1477 USA Web:
Phone: 630-505-7722
Fax:
630-505-7754
www.num.com
Axium Power
Software under OS
Windows 7
Date:12/23/10
NUM INFORMATION
US N 180
11/17
6. Select Start - The request will flash red / yellow and the number will increment.
NUM Corporation
603 East Diehl Road, Suite 115
Naperville, IL 60563-1477 USA Web:
Phone: 630-505-7722
Fax:
630-505-7754
www.num.com
Axium Power
Software under OS
Windows 7
Date:12/23/10
NUM INFORMATION
US N 180
12/17
7. Select Edit to display Station Parameters - the 3 tabs are displayed :Set values as below.
NUM Corporation
603 East Diehl Road, Suite 115
Naperville, IL 60563-1477 USA Web:
Phone: 630-505-7722
Fax:
630-505-7754
www.num.com
Axium Power
Software under OS
Windows 7
Date:12/23/10
NUM INFORMATION
US N 180
13/17
NUM Corporation
603 East Diehl Road, Suite 115
Naperville, IL 60563-1477 USA Web:
Phone: 630-505-7722
Fax:
630-505-7754
www.num.com
Axium Power
Software under OS
Windows 7
Date:12/23/10
NUM INFORMATION
US N 180
14/17
NUM Corporation
603 East Diehl Road, Suite 115
Naperville, IL 60563-1477 USA Web:
Phone: 630-505-7722
Fax:
630-505-7754
www.num.com
Axium Power
Software under OS
Windows 7
Date:12/23/10
NUM INFORMATION
US N 180
15/17
5. Test compatibility settings for the program is displayed Select Start program
button
6. When this message appears: Do you want to allow the following program from an
unknown publisher to make changes to this computer - Press YES button.
7. A DOS window appears a question displayed Continue Extraction?
Press Y followed by enter key.
NUM Corporation
603 East Diehl Road, Suite 115
Naperville, IL 60563-1477 USA Web:
Phone: 630-505-7722
Fax:
630-505-7754
www.num.com
Axium Power
Software under OS
Windows 7
Date:12/23/10
NUM INFORMATION
US N 180
16/17
NUM Corporation
603 East Diehl Road, Suite 115
Naperville, IL 60563-1477 USA Web:
Phone: 630-505-7722
Fax:
630-505-7754
www.num.com
Axium Power
Software under OS
Windows 7
Date:12/23/10
NUM INFORMATION
US N 180
17/17
NUM Corporation
603 East Diehl Road, Suite 115
Naperville, IL 60563-1477 USA Web:
Phone: 630-505-7722
Fax:
630-505-7754
www.num.com