Академический Документы
Профессиональный Документы
Культура Документы
ES0195A00015
Module R07
All rights reserved. This document and the information it contains are property of ERA a.s. and
confidential. They shall not be reproduced nor disclosed to any person except to those having a need
to know them, without prior written consent of ERA a.s.
L500: ES0195A00015-02
ERA a.s.
Prmyslov 387
530 03 Pardubice
Czech Republic
Tel: + 420 467 004 253
Fax: +420 466 670 461
www.erabeyondradar.com
Module R07
Datasheet
Table of Contents
1
PURPOSE..............................................................................................5
BLOCK DIAGRAM.................................................................................5
10
11
11.1
11.2
DISASSEMBLY .............................................................................................................13
ASSEMBLY ..................................................................................................................13
Module R07
Datasheet
Purpose
The SSR RX HD R07 module represents a high sensitive receiver of pulse
signals equipped with a SSR signal digital pulse selector enabling to process
SSR replies. The receiver has excellent dynamic range and it is suitable for
any applications within MSS. The receiver is equipped with dual output of the
fiber and coaxial video.
Block Diagram
Datasheet
Module R07
Module R07
Datasheet
Sensitivity S0,9
Dynamic range
90 dB min.
Bandwidth (3 dB)
16 MHz
90 dB (DC 860 MHz) min.
Power supply
Power consumption
7 W max.
Input signal
SSR replies Mode A,C
Carrier frequency
Pulse duration
0.45 s 0.1 s
0.1 s max.
0.2 s max.
Replies Mode S
Carrier frequency
Pulse duration
0.1 s max.
0.2 s max.
Output signal
Dual fiber video
Wave length
1310 nm
Output power
Optical fiber
TTL
Polarization
positive
Impedance
75
Datasheet
Module R07
Mechanical parameters
WxHxD
(without holders and connectors)
58 mm x 291 mm x 291 mm
Weight
4.2 kg
Operational conditions
Climate specification
Environmental effects
EMC
Tested according to
Temperature range
-40 C +60 C
Humidity
rh < 0 %, 100 % >
IP67
MIL-STD-810F/METHOD 512.4
Salt fog
MIL-STD-810F/METHOD 509.4
Fungus (Microbiotics)
MIL-STD-810F/METHOD 508.5
Compliant
EMI - SN EN 61000-6-3
EMS - SN EN 61000-6-2
Sinusoidal vibration
(a 1 g, f 200 Hz)
Shock (a 25 g)
Duration 6 ms
Mechanical specification
Storage conditions
Climate specification
-50 C +70 C
SN EN 60068-2-14 Nb
Reliability
MTBF
Module R07
(291)
(58)
(291)
Datasheet
Datasheet
10
Module R07
Module R07
Datasheet
Input
Power supply;
signal mains failure (power supply failure).
Input
Output
Input
Output
Input/Output
COM/PGM
Description
List of Indicators
Label
Type
RUN
Green LED
Yellow LED
Yellow LED
DIAG 1
DIAG 2
Description
Extended indication:
If at least a single bit of 4 (A/C-mode) or 5 (S-mode) of the output
configuration register set to 1, the response detector of A/C mode or S-mode
shall be active, and the way of operating states indication shall be changed.
The data frames reception is evaluated on the video line in regular intervals
of ten seconds. If a single or several A/C or S-mode responses detected, the
firmware shall change from the basic indication to the display indicating the
type of detected response. The display beginning and end is separated from
the basic indication by means of distinct extinguishing of all LEDs. The RUN
LED shall display the type of received responses by means of double blink in
the midst of diagnostic indication. Types of responses are coded by the
lengths of the RUN LED on states (see table below).
If no response detected in the interval of ten seconds, the LED display mode
shall not change, and only basic indication states shall be valid.
11
Datasheet
Type of
detected
response
A/C mode
S mode
A/C&S mode
LED
indication
Module R07
Indication mode
Interval [s]
3.2
0.2
0.4
0.8
3.2
RUN
off
on
off
on
off
DIAG 1
off
off
off
off
off
DIAG 2
off
off
off
off
off
Interval [s]
3.2
0.8
0.4
0.2
3.2
RUN
off
on
off
on
off
DIAG 1
off
off
off
off
off
DIAG 2
off
off
off
off
off
Interval [s]
3.2
0.8
0.4
0.8
3.2
RUN
off
on
off
on
off
DIAG 1
off
off
off
off
off
DIAG 2
off
off
off
off
off
On state: LED lights in given time interval; off state: LED extinguishes in
given time interval.
+20 V +28 V
30 s/(40 ms approx.)
0 V (high impedance)
43 s/(40 ms approx.)
10
12
Module R07
11
Datasheet
Replacement Procedure
Holders
Locking screw
11.1
Disassembly
11.2
Assembly
13