Академический Документы
Профессиональный Документы
Культура Документы
w w w . i n a t e c k . com
Packing list:
I.
FD2002 Introduction
This product support data copy and clone between dual HDDs. Meanwhile, it adopts USB3.0
(Super Speed) with date transfer rate up to 5Gbps and SATA3 (6Gbps) and backward
compatible with earlier versions as well. This excellent transmission performance and good
compatibility is convenient for data exchange and perfectly suitable for the men who need to
batch processing and clone data at some certain places, such as film and television
production, Backup & processing IT data, Schools batch processing data etc.
Product schematic
LED indicator
Clone Button
SATA HDD Slot
-2-
USB3.0
DC-IN Jack
Power Switch
Technical data
II.
Product name
USB3.0 Dual SATA HDD Docking Station with Offline Clone Function
Product type
Inateck FD2002
Weight
410g
Colour
Black
Supported drives
Interface
USB3.0
Material
Plastic
Supported
Licences
CE, FCC
Measurements
Operation environment
III.
d.
Power on, lower right comer of computer will have a mobile hardware prompt
after device recognized, disk management will also have one.
IV.
Please note: Before the removal of the data storage device, please stop all data access
and transfer to the device, so that the storage can be normally removed. Forced removal
may lead to damage or loss of crucial data. To prevent any data loss, please strictly follow
the steps for removal below!
a.
Removal from Windows systems: Right click on the hardware or USB device
removal symbol in the status bar, click on the periphery to be removed. When
the system notification reading the device can now be safely removed.
shows up, you can remove the data storage.
-3-
Another way to remove the data storage is through the device manager
(Computer -> Device Manager -> Drives -> Click on Remove for the drive
to be removed, so that the drive can be detached safely.
b.
Removal from Macintosh systems: Please choose the symbol for Portable
drives / devices, choose the menu function Remove from the drop down menu
by right clicking onto the symbol. You may also drag the Portable device to the
rubbish bin. Now, the device can be safely removed.
-4-
V.
VI.
This product supports offline duplicate function which can clone the HDD directly
without connecting to computers by USB port.
Insert the HDDs to "A"&"B", A is the HDD to be cloned, B is the target HDD to
cloning, HDDs capacity requires BA
Start cloning: Press "Clone" button on the product about 3 seconds, when release
the button The LED indicator of 100% will light up, and quickly click "Clone",
then it start cloning. Indicator lights (25%, 50%, 75%, 100%) flash up in turn
during cloning, and whole lights on after completion. Cloning is done.
Sleep Mode
a.
After finishing cloning HDDs under offline duplicate mode, product goes to sleep
mode if there were no operations in 30min and HDDs stop running. Power
Indicator light flashes up every 3 seconds, and other progress indicator lights
and disk light still work, that means clone is done and goes to sleep mode
without any operations. HDDs will wake up again to stand-by mode by press
clone button shortly.
b.
When USB3.0 port connects to computer, product goes to sleep mode if there
were no reading or writing on hard disk in 30min and HDDs stop running. Power
Indicator light flashes up every 3 seconds, and disk light keeps working. LED
lights flash up when computer reads and writes again.
-5-
1. Right-select the computer, select the management into Computer Management and
select Disk Management, then right-click the disk name in the left region, select
Initialize the disk, then right-click in the right area of the disk, select set up new simple
volume.
2. In the New Simple Volume Wizard, click Next, according to the desired partition resize
disk partition size, and select Next, specify the disk drive letter, Click Next, select the file
system, enter the volume label, and select Disk formatting way, click Next, click Finish,
the disk will be formatted. Above, the operation can be repeated according to disk size.
-6-
3. After operation finished, open My Computer, it will apper the New Disk except the
local disk, indicated that it connect computer successfully.
VIII. FAQ
a.
Unable to start cloning: Please check whether the actual capacity of B disk is
higher than A disk (BA), otherwise it wont work when A disks actual capacity
is higher than B disks. (B<A )
b.
c.
After cloning, the rest capacity of B disk is showed and operated via Computer
management - Storage - Disk management.
d.
Why over 2TB hard disk couldnt be identified by USB? Because the maximum
capacity of hard disk which Windows XP can supports is 2TB and couldnt be
identified by system if over 2TB. It only supports after upgrading the operating
system above Vista (64 bit) version and we suggest changing hard disk into a
GPT disk partition, or the operating system will not support over 2 TB disk
partitions.
e.
Please make sure that B hard disk data can be covered before cloning data.
Because once you start cloning, B hard disk partition methods and data are
completely cloned as A hard disk. Our company does NOT undertake any
responsibility for data or economy loss which could bring by damaged data.
-7-