Академический Документы
Профессиональный Документы
Культура Документы
ITEM NO.:
QUANTITY:
DESCRIPTION:
DUMP CART
MANUFACTURER:
BKI
MODEL:
WS-15STC
116
1
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
[
[
] SPARE NUMBER
] BY PURVEYOR
Warming Station
Model: WS-15ST
Compact Unit for Holding and
Warming Fried Foods
The Warming Station uses radiant heat
technology (top and lower heat) to extend
freshness for a variety of fried foods including
nuggets, fingers, fries, wedges, etc. Keep fried
foods moist and delicious and presentation
ready for a longer hold time. Features include
a rotating top that allows user to swivel the top
heat 90 for easier dumping and to eliminate
chance of burn. Also, a full-size, 2 deep
steam table pan fits into the dump bin; this
along with the design of flat surfaces provides
easy cleaning of unit. Unit is designed to fit
into countertop opening (WS-15ST) or custom
designed cart (WS-15STC).
Agency Approvals:
Standard Features:
BKI Europe
Theale Technology Centre
Station Road Theale
Reading West Berkshire RG7 4AA
Telephone: 0870 9904242 Fax: 0870 9904243
Mechanical Specifications:
WS-15ST
WS-15STC
Height
22.25 (56.5 mm)
55 3/8 (1406.5 mm)
Width
15 3/8 (390.5 mm)
18 (457.2 mm)
Depth
26 3/4 (679.5 mm)
32.5 (825.5 mm)
Weight
58 lbs. (26.3 kg.)
82 lbs. (37.2 kg.)
Electrical Options:
Model
WS-15ST (C)
Volts
Amps
Breaker
KW
Wires
Phase
120
9.2
15
1.1
BKI Europe
Theale Technology Centre
Station Road Theale
Reading West Berkshire RG7 4AA
Telephone: 0870 9904242 Fax: 0870 9904243
ITEM NO.:
QUANTITY:
DESCRIPTION:
131
1
MANUFACTURER:
BKI
MODEL:
2TSM-3824
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
[
[
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
CORD LEFT
] SPARE NUMBER
] BY PURVEYOR
Sandwich
Merchandiser
Model:
2TSM-2624, 2TSM-3824,
2TSM-5024, 2TSM-6224
Countertop Sandwich
Warmer with Ceramic
Infrared Top Heat
BKIs Sandwich Merchandising equipment
offers you flexibility and extended holding
time. Designed with your unique
environment in mind, this unit is available in
a variety of lengths: 26, 38, 50, and 62 inch
models.
Pictured: 2TSM-6224
Standard Features:
Ceramic infrared top heat
Individual thermostatic controls
Slot dividers
Agency Approvals:
BKI Europe
Theale Technology Centre
Station Road Theale
Reading West Berkshire RG7 4AA
Telephone: 0870 9904242 Fax: 0870 9904243
Mechanical Specifications:
Dimension
Height
Width
Depth
Floor Space
2TSM-2624
29 (444.5mm)
26 (660.4mm)
24 (609.6mm)
4.33 sq.ft. (0.40 sq.m)
2TSM-3824
29 (444.5mm)
38 (965.2mm)
24 (609.6mm)
6.33 sq.ft. (0.59 sq.m)
2TSM-5024
29 (444.5mm)
50 (1270.0mm)
24 (609.6mm)
8.33 sq.ft. (0.77 sq.m)
2TSM-6224
29 (444.5mm)
62 (1574.8mm)
24 (609.6mm)
10.33 sq.ft. (0.96 sq.m)
Electrical Options:
Volts
Amps
Breaker
kW
Wires
Phase
2TSM-2624
120
9.13
15
1.090
2
1
2TSM-3824
120/208
9.18
20
1.730
3
1
2TSM-5024
120/208
9.66
20
1.830
3
1
Options
BKI Europe
Theale Technology Centre
Station Road Theale
Reading West Berkshire RG7 4AA
Telephone: 0870 9904242 Fax: 0870 9904243
2TSM-6224
120/208
13.02
20
2.460
3
1
ITEM NO.:
QUANTITY:
DESCRIPTION:
MANUFACTURER:
BKI
MODEL:
FW15-L PC#312008D
150
1
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
[
[
] SPARE NUMBER
] BY PURVEYOR
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
ITEM NO.:
QUANTITY:
DESCRIPTION:
HEAT LAMP
MANUFACTURER:
BKI
MODEL:
WS-15ST
153
1
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
[
[
] SPARE NUMBER
] BY PURVEYOR
Warming Station
Model: WS-15ST
Compact Unit for Holding and
Warming Fried Foods
The Warming Station uses radiant heat
technology (top and lower heat) to extend
freshness for a variety of fried foods including
nuggets, fingers, fries, wedges, etc. Keep fried
foods moist and delicious and presentation
ready for a longer hold time. Features include
a rotating top that allows user to swivel the top
heat 90 for easier dumping and to eliminate
chance of burn. Also, a full-size, 2 deep
steam table pan fits into the dump bin; this
along with the design of flat surfaces provides
easy cleaning of unit. Unit is designed to fit
into countertop opening (WS-15ST) or custom
designed cart (WS-15STC).
Agency Approvals:
Standard Features:
BKI Europe
Theale Technology Centre
Station Road Theale
Reading West Berkshire RG7 4AA
Telephone: 0870 9904242 Fax: 0870 9904243
Mechanical Specifications:
WS-15ST
WS-15STC
Height
22.25 (56.5 mm)
55 3/8 (1406.5 mm)
Width
15 3/8 (390.5 mm)
18 (457.2 mm)
Depth
26 3/4 (679.5 mm)
32.5 (825.5 mm)
Weight
58 lbs. (26.3 kg.)
82 lbs. (37.2 kg.)
Electrical Options:
Model
WS-15ST (C)
Volts
Amps
Breaker
KW
Wires
Phase
120
9.2
15
1.1
BKI Europe
Theale Technology Centre
Station Road Theale
Reading West Berkshire RG7 4AA
Telephone: 0870 9904242 Fax: 0870 9904243
ITEM NO.:
QUANTITY:
DESCRIPTION:
MANUFACTURER:
TRAULSEN
MODEL:
RHT232WUT-FHS
165
2
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
[
[
] SPARE NUMBER
] BY PURVEYOR
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
Project
Quantity
Item #
Model Specified:
R
SERIES
Stainless Exterior
& Interior
INTELA-TRAUL
Equipped!
A
SERIES
Stainless Exterior,
Anodized
Aluminum Interior
RHT132WUT-FHS
RHT232WUT-FHS
RHT332WUT-FHS
RHT132WUT-HHS
RHT232WUT-HHS
RHT332WUT-HHS
AHT132WUT-FHS
AHT232WUT-FHS
AHT332WUT-FHS
AHT132WUT-HHS
AHT232WUT-HHS
AHT332WUT-HHS
Model RHT132WUT-FHS
Approval: ___________________________________
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
Website: www.traulsen.com
SECTION
1-1
Project
Quantity
Item #
Model Specified:
Specifications
Construction, Hardware and Insulation
Cabinet exterior front, one piece sides, louver assembly and doors are constructed
of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are
constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet
top, back and bottom are constructed of heavy gauge aluminized steel. A set of four
(4) adjustable 6" high stainless steel legs are included.
Doors are equipped with a gasket protecting metal door pan, removable plug
cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide
hinges with stay open feature at 120 degrees. Hinges include a concealed switch to
automatically activate the interior incandescent lighting. Guaranteed for life, work
flow door handles are mounted horizontally over recess in door which limits
protrusion from door face into aisleways. Doors have seamless, polished metal
corners.
Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Anti condensate heaters are located behind each door opening.
Both the cabinet and door(s) are insulated with an average of 2" thick high density,
non-CFC, foamed in place polyurethane.
DIMENSIONAL DATA
Net capacity cu. ft.
Length - overall in.
Depth - overall in.
Depth - less handle in.
Depth - over body in.
Depth - door open 90 in.
Clear door width in.
Clear half-door height in.
Clear full-door height in.
Height - overall on 6" legs
No. Standard Shelves
Shelf area sq. ft.1
ELECTRICAL DATA
Voltage
Feed wires with Ground
Full load amperes
REFRIGERATION DATA
Refrigerant
BTU/HR H.P.2
SHIPPING DATA3
Length - crated in.
Depth - crated in.
Height - crated in.
Volume - crated cu. ft.
RHT Net Wt. lbs.
RHT Gross Wt. lbs.
AHT Net Wt. lbs.
AHT Gross Wt. lbs.
R/AHT132WUT
24.2 (686 cu l)
2978 (75.9 cm)
35 (88.8 cm)
3334 (84.4 cm)
32 (81.3 cm)
571116 (146.5 cm)
2118 (53.6 cm)
2712 (69.9 cm)
5758 (146.3 cm)
8314 (211.5 cm)
3
18.8 (1.75 sq m)
R/AHT232WUT
51.6 (1462 cu l)
58 (147.3 cm)
35 (88.8 cm)
3334 (84.4 cm)
32 (81.3 cm)
571116 (146.5 cm)
2118 (53.6 cm)
2712 (69.9 cm)
5758 (146.3 cm)
8314 (211.5 cm)
6
37.6 (3.49 sq m)
R/AHT332WUT
79.0 (2238 cu l)
8618 (218.8 cm)
35 (88.8 cm)
3334 (84.4 cm)
32 (81.3 cm)
571116 (146.5 cm)
2118 (53.6 cm)
2712 (69.9 cm)
5758 (146.3 cm)
8314 (211.5 cm)
9
56.4 (5.23 sq m)
115/60/1
3
8.0
115/60/1
3
10.4
115/60/1
3
10.9
R-134a
2220 (13 HP)
R-134a
4200 (12 HP)
R-134a
4200 (12 HP)
35 (89 cm)
43 (109 cm)
8312 (212 cm)
71 (2011 cu l)
380 (172 kg)
470 (213 kg)
330 (150 kg)
420 (191 kg)
63 (160 cm)
43 (109 cm)
8312 (212 cm)
131 (3711 cu l)
630 (286 kg)
770 (349 kg)
550 (249 kg)
690 (313 kg)
91 (231 cm)
43 (109 cm)
8312 (212 cm)
189 (5354 cu l)
880 (399 kg)
1060 (481 kg)
760 (345 kg)
940 (426 kg)
Refrigeration System
A top mounted, self-contained, balanced refrigeration system using R-134a
refrigerant is conveniently located behind the one piece louver assembly. It features
an easy to clean front facing condenser, thermostatic expansion valve, air-cooled
hermetic compressor, plenum effect blower coil, large, high humidity evaporator coil
located outside the food zone and a top mounted non-electric condensate
evaporator. Biased return air duct protects against introduction of warm kitchen air,
promoting even temperature maintenance and efficient operation. A 9' cord and
plug is provided. Standard operating temperature is 34 to 38F.
Controller
The easy to use water resistant INTELA-TRAUL microprocessor control system is
supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready.
Optional hardware required to be NDP compliant. Third party software required for
network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius
Temperature Scale Display Capability, and an RS485 data port. In addition it
includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean
Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply
Interruption.
Interior
Standard interior arrangements include three (3) chrome plated wire shelves per
section, mounted on shelf pins. Shelves are full-width, and do not have any large
gaps between them requiring the use of "bridge" or "junior shelves." Recommended
load limit per shelf should not exceed 225 lbs. Optional tray slides may be
purchased in combination with, or in lieu of these. Both standard and optional
interior arrangements are completely installed at the factory.
Warranties
Both a one year parts and labor warranty and a five year compressor warranty (selfcontained models only) are provided standard. An optional 2nd year extended parts
and labor warranty is also available. In addition the INTELA-TRAUL control is
warranted by a two year parts and labor warranty.
Elevation R/AHT232WUT
Elevation R/AHT132WUT
Plan - R/AHT132WUT
Elevation R/AHT332WUT
Plan - R/AHT232WUT
NOTES
NOTE: Figures in parentheses reflect metric equivalents.
1= Area of standard shelf compliment only, does not include storage area of additional shelves or available
on cabinet bottom.
2= Based on a 90 degree F ambient and 20 degree F evaporator.
3= For approximate remote weights deduct 40 lbs. from respective net or gross weight. For other information
on remote models, please refer to spec sheet 12-2.
NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any
additional warranties.
Plan - R/AHT332WUT
SECTION
1-1
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
Website: www.traulsen.com
ITEM NO.:
QUANTITY:
DESCRIPTION:
MANUFACTURER:
TRAULSEN
MODEL:
TS066HT-ZCF03
166
1
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
[
[
] SPARE NUMBER
] BY PURVEYOR
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
Project
Quantity
Item #
Model Specified:
TS
SERIES
TS048HT
TS066HT
TS072HT
TS090HT
The #1 complaint about prep tables is pans not being kept cold enough.
This can lead to unnecessary food waste, Health Department citations, or
even food safety issues. Other problems include frequently frozen product,
and the labor required everyday to clean the inevitable ice and water made
by traditional cold wall types. If youve experienced any of these problems
before, then Traulsen's easy to clean prep table (with drain) is what you've
been looking for.
Also, Traulsen prep table's TempAssure air flow system circulates cold air
around and underneath the pans, as well as lofting a protective blanket over
the food surface, effectively insulating it from warm kitchen air. For you this
means...
Model TS072HT
TempAssure air flow system ensures pans are held cold, making them ideal
for preparing pizzas, sandwiches, bagels, gyros, burgers, salads, tacos/burritos, sushi, etc. or nearly anything requiring a ready supply of cold ingredients
and/or condiments. Traulsen's TS Series prep tables provide the answer to
the all too common open top pan dilemma.
Approval:___________________________________
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
Website: www.traulsen.com
Project
Quantity
Item #
Model Specified:
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
Website: www.traulsen.com
Project
Quantity
Item #
Model Specified:
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
Website: www.traulsen.com
Project
Quantity
Item #
Model Specified:
Specifications
CONSTRUCTION, HARDWARE AND INSULATION
Unit exterior top and front sides are constructed of stainless steel, back and
bottom is constructed of galvanized steel. Cabinet interior is constructed
of stainless steel. Unit is insulated with an average 2" insulation on the
top, bottom and all sides.
The 12" wide raised ingredient rail is designed to accommodate standard
full, half or third size pans (pans supplied by others). Other size pans
require use of adapter bars (pans and bars supplied by others). Accommodates 6" deep pans. Stainless steel insulated lift-up rail cover, with two
convenient open positions.
Doors are equipped with self-closing hinges and metal door handle with
gasket guard. Each includes an easily removable for cleaning, vinyl magnetic door gasket which assures a tight door seal.
INTERIOR ARRANGEMENTS & SUPPORTS
Unit includes two (2) shelves per door, mounted on shelf pins. Cabinet is
mounted on a set of 6" high heavy-duty casters.
DIMENSIONAL DATA
Net Capacity cu. ft.
Number of Pans (third size)
Drawer Option1
Pan Configurations
Length - Overall in.
Depth - Overall in.2
Clear Door Width in.
Clear Door Height in.
Number of Doors
Standard Door Hinging
Number of Shelves
Shelf Area sq. ft.3
Work Surface Height in.
Height - Overall in.
ELECTRICAL DATA
Voltage
Full Load Amperes
NEMA Plug
REFRIGERATION DATA
Refrigerant
BTU4
Compressor HP
REFRIGERATION SYSTEM
The self-contained refrigeration system cools the cabinet interior, as well as
the raised ingredient rail through use of an exclusive TempAssure airflow
ducting system which creates a layer of cold air over the pans, as well as
all sides and bottom of the pans. This system distributes cold air from
top to bottom, keeping the pans cold without freezing product and allows
for "all-day" temperature performance to NSF7 test requirements. The
condensing unit utilizes a hermetically sealed compressor, which is easily
accessible behind the louvers. A 9' cord and plug is supplied standard.
Standard interior cabinet operating temperature is 34 to 38F.
WARRANTIES
Both a one year parts and labor warranty and a five year compressor warranty are provided standard. Three Year drawer parts warranty. An optional
2nd year extended parts and labor warranty is also available.
TS048HT
TS066HT
TS072HT
TS090HT
9.5
15.7
17.9
24.4
6
9
10
12
Front to Back
Side by Side
See Note 1
Side by Side
48 (121.9 cm)
66 (167.6 cm)
72 (182.9 cm)
90 (228,6 cm)
36 (91.4 cm)
36(91.4 cm)
36(91.4 cm)
36(91.4 cm)
23
18.7
23 & 18.7
18.7
20.5
20.5
20.5
20.5
1
2
2
3
RH
LH/RH
LH/RH
LH/LH/RH
2
4
4
6
9.2
14.8
16.6
22.2
35-9/16 (90.3 cm) 35-9/16 (90.3 cm) 35-9/16 (90.3 cm) 35-9/16 (90.3 cm)
48-3/8 (122.9 cm) 48-3/8 (122.9 cm) 48-3/8 (122.9 cm) 48-3/8 (122.9 cm)
115/60/1
9.8
5-15P
115/60/1
9.0
5-15P
115/60/1
9.0
5-15P
115/60/1
9.0
5-15P
R-404a
3300
1/2
R-404a
3870
1/2
R-404a
3870
1/2
R-404a
3870
1/2
NOTES
NOTE: When ordering please specify: Voltage, Hinging, Options and any additional warranties.
Continued product development may necessitate specification changes without notice.
Part No. TR35920 (revised 10/10)
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
Website: www.traulsen.com
ITEM NO.:
QUANTITY:
171
1
DESCRIPTION:
MANUFACTURER:
CLAYTON SIGNS
MODEL:
CUSTOM
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
[
[
] SPARE NUMBER
] BY PURVEYOR
PER DRAWING
PER DRAWING
ITEM NO.:
QUANTITY:
DESCRIPTION:
TEA BREWER
MANUFACTURER:
WILBUR CURTIS
MODEL:
TCTT10040 G3
212
1
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
48 A.F.F.
VENTILATION:
SUPPLEMENTAL INFORMATION:
[
[
] SPARE NUMBER
] BY PURVEYOR
ITEM NO
PROJECT
DATE
FEATURES AT A GLANCE
TCTS
PTT3
16.5
(41.9 cm)
(22.9 cm)
5.25
(13.3 cm)
TCTS10
TCTT10
Sweet Tea
2.875
(7.3 cm)
1
(2.5 cm)
TCTT
38.25
(97.2 cm)
TCTT
26.625
TCTS
34
(67.6 cm)
TCTS
22.375
(86.4 cm)
(56.8 cm)
TCTT
26.25
(66.7 cm)
TCTS
22.125
(56.2 cm)
11.5
(29.2 cm)
13.5
(34.3 cm)
1.125
(2.9 cm)
20.75
10.125
(52.7 cm)
(25.7 cm)
PTT310
(TCO 308 Dispenser
Included)
13.5
22.5
Specifications
Finished Brew Capacity
Dimensions (HxWxD)
Voltage
Power Requirements
Cord & Plug
Water Inlet
Shipping Weight
Cube (cu.ft)
TCTS10
TCTT10
PTT310
3 to 5 Gallons
34 x 10.125 x 20.75
120VAC/60Hz
1700W/14.2A
6 ft/NEMA 5-15P
1/4 Flare
38 lbs.
9.7
3 to 5 Gallons
38.25 x 10.125 x 20.75
120VAC/60Hz
1700W/14.2A
6 ft/NEMA 5-15P
1/4 Flare
38 lbs.
9.7
3 Gallons
29 x 11.125 x 20.875
120VAC/60Hz
1700W/14.2A
6 ft/NEMA 5-15P
1/4 Flare
46 lbs.
7.5
TCO-308 (Oval)
TCO-RS (Stand)
TCO-421 (Oval)
TC-3H (Round)
PTT310
3 Gallons
n/a
9h x 11.125w x 13.5d
13.5
5 lbs.
1.8
PTT310
n/a
n/a
10h x 14w x 14d
14
8 lbs.
1.1
TCTS10/TCTT10
4 Gallons
9.875
21h x 11.125w x 15d
21.75
12 lbs.
3.7
TCTS10/TCTT10
3.5 Gallons
8.125
9.375 diameter
22.75
8.25 lbs.
1.3
ITEM NO.:
QUANTITY:
DESCRIPTION:
COFFEE BREWER
MANUFACTURER:
WILBUR CURTIS
MODEL:
TP2S10A3140
216
1
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
[
[
] SPARE NUMBER
] BY PURVEYOR
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
48 A.F.F.
VENTILATION:
SUPPLEMENTAL INFORMATION:
ITEM NO.:
QUANTITY:
DESCRIPTION:
LEMONADE DISPENSER
MANUFACTURER:
CLELAND
MODEL:
S-2
220
1
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
[
[
] SPARE NUMBER
] BY PURVEYOR
ITEM NO.:
QUANTITY:
224
1
DESCRIPTION:
MANUFACTURER:
TAYLOR
MODEL:
751
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
[
[
] SPARE NUMBER
] BY PURVEYOR
ITEM NO.:
QUANTITY:
228
1
DESCRIPTION:
MANUFACTURER:
HOBART/TRAULSEN
MODEL:
UHT48
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
[
[
] SPARE NUMBER
] BY PURVEYOR
UTILITY REQUIREMENTS:
ELECTRICAL:
5.7 AMPS, 0.48 KW, 1/3 HP, 115V, 1 PHASE, PLUG, NEMA 5-15R
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
NO TOP W/ CASTERS
Project
Quantity
Item #
Model Specified:
UHT
SERIES
UHT27
UHT48
UHT60
Stainless Exterior,
Anodized
Aluminum Interior
Approval: ___________________________________
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
Website: www.traulsen.com
SECTION
9-1
Project
Quantity
Item #
Model Specified:
Elevation - UHT27
Plan - UHT27
Elevation - UHT48
Plan - UHT48
SECTION
9-1
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
Website: www.traulsen.com
Project
Quantity
Model Specified:
Item #
CSI Section 11400
Elevation - UHT60
Plan - UHT60
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
Website: www.traulsen.com
SECTION
9-1
Project
Quantity
Item #
Model Specified:
Specifications
Construction, Hardware and Insulation
Cabinet exterior front, one piece sides, louver assembly and doors are constructed
of 22 gauge stainless steel. Cabinet interior and door liners are constructed of
anodized aluminum. The exterior cabinet back and bottom are constructed of
galvanized steel.
A stainless steel door with a recessed work-flow handle and anodized aluminum liner
is provided. The door self closes at less than 90 degrees and also includes a stay
open feature at 105 degrees. Easily removable for cleaning, vinyl magnetic door
gasket assures tight door seal.
Both the cabinet and door(s) are insulated with an average of 2" thick high density,
non-CFC, foamed in place polyurethane.
Refrigeration System
A balanced, rear mounted, front breathing, self-contained refrigeration system using
R-134a refrigerant is provided. It features a capillary tube metering device, air-cooled
hermetic compressor, a forced air evaporator coil and a non-electric condensate
evaporator. An 8' cord and plug is provided. Standard operating temperature is 34 to
38F.
Interior
Standard interior arrangements include two (2) powder coated wire shelves per door,
mounted on pilasters. These are adjustable in 1/2" increments, allowing for a minimum of 1-1/2" spacing between shelves.
Warranties
Both a one year parts and labor warranty and a five year compressor warranty (selfcontained models only) are provided standard. An optional 2nd year extended parts
and labor warranty is also available.
DIMENSIONAL DATA
Net capacity cu. ft.
Length - overall in.
UHT27
7.1
27
UHT48
13.1
48
UHT60
16.7
60
3078
3078
3078
5458
50
5438
2418
2418
2418
2234
1814
2234
35 2
2
4.88
35 2
4
10.3
3512
4
13.2
115/60/1
3.3
225
115/60/1
5.7
480
115/60/1
5.7
480
R-134a
R-134a
R-134a
BTU/HR - H.P.1
SHIPPING DATA
44
6312
44 4
3
46 4
53
250
275
7512
4414
4634
90
355
380
44 4
46 4
76
265
290
NOTES
Based on a 90 degree F ambient and 20 degree F evaporator.
SECTION
9-1
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
Website: www.traulsen.com
ITEM NO.:
QUANTITY:
229
1
DESCRIPTION:
UNDERCOUNTER REFRIGERATOR 27
MANUFACTURER:
HOBART/TRAULSEN
MODEL:
UHT27-ZCF
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
[
[
] SPARE NUMBER
] BY PURVEYOR
UTILITY REQUIREMENTS:
ELECTRICAL:
3.3 AMPS, 0.23 KW, 1/6 HP, 115V, 1 PHASE, PLUG, NEMA 5-15R
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
NO BSWO OR TOP
HGD RIGHT
Project
Quantity
Item #
Model Specified:
UHT
SERIES
UHT27
UHT48
UHT60
Stainless Exterior,
Anodized
Aluminum Interior
Approval: ___________________________________
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
Website: www.traulsen.com
SECTION
9-1
Project
Quantity
Item #
Model Specified:
Elevation - UHT27
Plan - UHT27
Elevation - UHT48
Plan - UHT48
SECTION
9-1
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
Website: www.traulsen.com
Project
Quantity
Model Specified:
Item #
CSI Section 11400
Elevation - UHT60
Plan - UHT60
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
Website: www.traulsen.com
SECTION
9-1
Project
Quantity
Item #
Model Specified:
Specifications
Construction, Hardware and Insulation
Cabinet exterior front, one piece sides, louver assembly and doors are constructed
of 22 gauge stainless steel. Cabinet interior and door liners are constructed of
anodized aluminum. The exterior cabinet back and bottom are constructed of
galvanized steel.
A stainless steel door with a recessed work-flow handle and anodized aluminum liner
is provided. The door self closes at less than 90 degrees and also includes a stay
open feature at 105 degrees. Easily removable for cleaning, vinyl magnetic door
gasket assures tight door seal.
Both the cabinet and door(s) are insulated with an average of 2" thick high density,
non-CFC, foamed in place polyurethane.
Refrigeration System
A balanced, rear mounted, front breathing, self-contained refrigeration system using
R-134a refrigerant is provided. It features a capillary tube metering device, air-cooled
hermetic compressor, a forced air evaporator coil and a non-electric condensate
evaporator. An 8' cord and plug is provided. Standard operating temperature is 34 to
38F.
Interior
Standard interior arrangements include two (2) powder coated wire shelves per door,
mounted on pilasters. These are adjustable in 1/2" increments, allowing for a minimum of 1-1/2" spacing between shelves.
Warranties
Both a one year parts and labor warranty and a five year compressor warranty (selfcontained models only) are provided standard. An optional 2nd year extended parts
and labor warranty is also available.
DIMENSIONAL DATA
Net capacity cu. ft.
Length - overall in.
UHT27
7.1
27
UHT48
13.1
48
UHT60
16.7
60
3078
3078
3078
5458
50
5438
2418
2418
2418
2234
1814
2234
35 2
2
4.88
35 2
4
10.3
3512
4
13.2
115/60/1
3.3
225
115/60/1
5.7
480
115/60/1
5.7
480
R-134a
R-134a
R-134a
BTU/HR - H.P.1
SHIPPING DATA
44
6312
44 4
3
46 4
53
250
275
7512
4414
4634
90
355
380
44 4
46 4
76
265
290
NOTES
Based on a 90 degree F ambient and 20 degree F evaporator.
SECTION
9-1
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
Website: www.traulsen.com
ITEM NO.:
QUANTITY:
DESCRIPTION:
BREADING TABLE
MANUFACTURER:
RANDELL
MODEL:
52365WPRM-CFA
231
1
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
[
[
] SPARE NUMBER
] BY PURVEYOR
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
model 52365WPRM-CFA
Specifications:
Standard Features:
Lift-assisted stainless cover that doubles as a work surface when
closed
Split-hinged louver doors allowing access to the cold well drain and
filter while protecting the controllers and on/off switch
Recessed front edge for easy reach and improved ergonomics to pans
Removable pan adaptor frames
Drain in cold well for easy clean-up
Foamed in place urethane insulation providing superior temperature
maintenance and structural durability
4 casters for easy mobility
Foot pulls on doors for hands-free operation
(3) stainless steel wire shelves behind each door
Removable side panel for easy access to compressor housing
Electrical cord bracket for winding up cord during moving
Stainless steel stand-offs to allow unit to breath
Removable filter for condensing unit
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
Model 52365WPRM-CFA
PP DWG0001 Rev.
MODEL 52365WPRM-CFA
L
Doors
65 33 42 (3) 18
Storage
26
13.2
Pan
Capacity
HP
(4) 12x20
(1) 1/2-long 1/2HP
Volt
115
Ship
Amps NEMA Weight
(lbs)
12
* Height is to work-surface; front edge is at 39 with recessed ledge for easy access to the cold well. With cover in open position, overall height is 72.
Depth is 34 overall with 1 bumper (stand-offs).
5-15p
740
ITEM NO.:
QUANTITY:
DESCRIPTION:
MANUFACTURER:
TRAULSEN
MODEL:
RLT132WUT-FHS-ZCF01
236
1
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
[
[
] SPARE NUMBER
] BY PURVEYOR
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
HGD RIGHT, SHELVES
Project
Quantity
Item #
Model Specified:
R
SERIES
Stainless Exterior
& Interior
INTELA-TRAUL
Equipped!
A
SERIES
Stainless Exterior,
Anodized
Aluminum Interior
RLT132WUT-FHS
RLT232WUT-FHS
RLT332WUT-FHS
RLT132WUT-HHS
RLT232WUT-HHS
RLT332WUT-HHS
ALT132WUT-FHS
ALT232WUT-FHS
ALT332WUT-FHS
ALT132WUT-HHS
ALT232WUT-HHS
ALT332WUT-HHS
Model RLT132WUT-FHS
Approval: ___________________________________
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
Website: www.traulsen.com
SECTION
1-8
Project
Quantity
Item #
Model Specified:
Specifications
Construction, Hardware and Insulation
Cabinet exterior front, one piece sides, louver assembly and doors are constructed
of 20 gauge stainless steel with #4 finish. Cabinet interior and door liners are
constructed of stainless steel (anodized aluminum in the A-Series). The exterior cabinet
top, back and bottom are constructed of heavy gauge aluminized steel. A set of four
(4) adjustable 6" high stainless steel legs are included.
Doors are equipped with a gasket protecting metal door pan, removable plug
cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide
hinges with stay open feature at 120 degrees. Hinges include a concealed switch to
automatically activate the interior incandescent lighting. Guaranteed for life, work
flow door handles are mounted horizontally over recess in door which limits
protrusion from door face into aisleways. Doors have seamless, polished metal
corners.
Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Anti condensate heaters are located behind each door opening.
Both the cabinet and door(s) are insulated with an average of 2" thick high density,
non-CFC, foamed in place polyurethane.
DIMENSIONAL DATA
Net capacity cu. ft.
Length - overall in.
Depth - overall in.
Depth - less handle in.
Depth - over body in.
Depth - door open 90 in.
Clear door width in.
Clear half-door height in.
Clear full-door height in.
Height - overall on 6" legs
No. Standard Shelves
Shelf area sq. ft.1
ELECTRICAL DATA
Voltage
Feed wires with Ground
Full load amperes
REFRIGERATION DATA
Refrigerant
BTU/HR H.P.2
SHIPPING DATA3
Length - crated in.
Depth - crated in.
Height - crated in.
Volume - crated cu. ft.
RLT Net Wt. lbs.
RLT Gross Wt. lbs.
ALT Net Wt. lbs.
ALT Gross Wt. lbs.
R/ALT132WUT
24.2 (686 cu l)
2978 (75.9 cm)
35 (88.8 cm)
3334 (84.4 cm)
32 (81.3 cm)
571116 (146.5 cm)
2118 (53.6 cm)
2712 (69.9 cm)
5758 (146.3 cm)
8314 (211.5 cm)
3
18.8 (1.75 sq m)
R/ALT232WUT
51.6 (1462 cu l)
58 (147.3 cm)
35 (88.8 cm)
3334 (84.4 cm)
32 (81.3 cm)
571116 (146.5 cm)
2118 (53.6 cm)
2712 (69.9 cm)
5758 (146.3 cm)
8314 (211.5 cm)
6
37.6 (3.49 sq m)
R/ALT332WUT
79.0 (2238 cu l)
8618 (218.8 cm)
35 (88.8 cm)
3334 (84.4 cm)
32 (81.3 cm)
571116 (146.5 cm)
2118 (53.6 cm)
2712 (69.9 cm)
5758 (146.3 cm)
8314 (211.5 cm)
9
56.4 (5.23 sq m)
115/60/1
3
11.5
115/60/1
3
14.9
208/115/60/1
4
10.8
R-404A
2160 (12 HP)
R-404A
3790 (34 HP)
R-404A
4710 (1 HP)
35 (89 cm)
43 (109 cm)
8312 (212 cm)
71 (2011 cu l)
415 (188 kg)
505 (229 kg)
365 (166 kg)
455 (206 kg)
63 (160 cm)
43 (109 cm)
8312 (212 cm)
131 (3711 cu l)
705 (320 kg)
845 (383 kg)
625 (283 kg)
765 (347 kg)
91 (231 cm)
43 (109 cm)
8312 (212 cm)
189 (5354 cu l)
940 (426 kg)
1120 (508 kg)
820 (372 kg)
1000 (454 kg)
Refrigeration System
A top mounted, self-contained, balanced refrigeration system using R-404A
refrigerant is conveniently located behind the one piece louver assembly. It features
an easy to clean front facing condenser, thermostatic expansion valve, air-cooled
hermetic compressor, plenum effect blower coil, large, high humidity evaporator coil
located outside the food zone and a top mounted non-electric condensate
evaporator. Biased return air duct protects against introduction of warm kitchen air,
promoting even temperature maintenance and efficient operation. A 9' cord and
plug is provided. Standard operating temperature is 0 to -5F.
Controller
The easy to use water resistant INTELA-TRAUL microprocessor control system is
supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready.
Optional hardware required to be NDP compliant. Third party software required for
network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius
Temperature Scale Display Capability, Defrost Lockouts, and an RS485 data port.
In addition it includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open,
Clean Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power
Supply Interruption.
Interior
Standard interior arrangements include three (3) chrome plated wire shelves per
section, mounted on shelf pins. Shelves are full-width, and do not have any large
gaps between them requiring the use of "bridge" or "junior shelves." Recommended
load limit per shelf should not exceed 225 lbs. Optional tray slides may be
purchased in combination with, or in lieu of these. Both standard and optional
interior arrangements are completely installed at the factory.
Warranties
Both a one year parts and labor warranty and a five year compressor warranty (selfcontained models only) are provided standard. An optional 2nd year extended parts
and labor warranty is also available. In addition the INTELA-TRAUL control is
warranted by a two year parts and labor warranty.
Elevation R/ALT232WUT
Elevation R/ALT132WUT
Plan - R/ALT132WUT
Elevation R/ALT332WUT
Plan - R/ALT232WUT
NOTES
NOTE: Figures in parentheses reflect metric equivalents.
1= Area of standard shelf compliment only, does not include storage area of additional shelves or available
on cabinet bottom.
2= Based on a 90 degree F ambient and -10 degree F evaporator.
3= For approximate remote weights deduct 40 lbs. from respective net or gross weight. For other information
on remote models, please refer to spec sheet 12-2.
2-Section
Models
5-20P
3-Section
Models
L14-20P
NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any
additional warranties.
Plan - R/ALT332WUT
SECTION
1-8
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
Website: www.traulsen.com
ITEM NO.:
QUANTITY:
238
1
TRAULSEN
MODEL:
RHT126WUT-ZCF02
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
[
[
] SPARE NUMBER
] BY PURVEYOR
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
HH DRS HGD LEFT
Project
Quantity
Item #
Model Specified:
R
SERIES
RHT126WUT-FHG
RHT226WUT-FHG
RHT126WUT-HHG
RHT226WUT-HHG
AHT126WUT-FHG
AHT226WUT-FHG
AHT126WUT-HHG
AHT226WUT-HHG
Stainless Exterior
& Interior
INTELA-TRAUL
Equipped!
A
SERIES
Stainless Exterior,
Anodized
Aluminum Interior
Model RHT126WUT-HHG
(shown with optional fluorescent lights & casters)
NOTE: Full load amps and plug style may vary depending
on electrical options chosen and condensing unit employed.
Approval: ___________________________________
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
Website: www.traulsen.com
SECTION
11-5
Project
Quantity
Item #
Model Specified:
Specifications
Construction, Hardware and Insulation
Cabinet exterior front, one piece sides and louver assembly are constructed of 20
gauge stainless steel with #4 finish. Cabinet interior is constructed of stainless steel
(anodized aluminum in the A-Series). The exterior cabinet top, back and bottom are
constructed of heavy gauge aluminized steel. A set of four (4) adjustable 6" high
stainless steel legs are included.
Doors are equipped with removable plug cylinder locks and guaranteed for life camlift, gravity action, self-closing metal, glide hinges with stay open feature at 120
degrees. An external switch is provided to activate the interior incandescent lighting.
Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Anti condensate heaters are located behind each door opening.
The cabinet is insulated with an average of 2" thick high density, non-CFC, foamed in
place polyurethane.
DIMENSIONAL DATA
Net capacity cu. ft.
Length - overall in.
Depth - overall in.
Depth - less handle in.
Depth - over body in.
Depth - door open 90 in.
Clear door width in.
Clear half-door height in.
Clear full-door height in.
Height - overall on 6" legs
No. Standard Shelves
Shelf area sq. ft.1
ELECTRICAL DATA
Voltage
Feed wires with Ground
Full load amperes2
Full load amperes3
REFRIGERATION DATA
Refrigerant
BTU/HR H.P.4
SHIPPING DATA5
Length - crated in.
Depth - crated in.
Height - crated in.
Volume - crated cu. ft.
RHT Net Wt. lbs.
RHT Gross Wt. lbs.
AHT Net Wt. lbs.
AHT Gross Wt. lbs.
R/AHT126WUT
19.1 (541 cu l)
2978 (75.9 cm)
29 (73.6 cm)
R/AHT226WUT
40.8 (1156 cu l)
58 (147.3 cm)
29 (73.6 cm)
26 (66.0 cm)
571116 (146.5 cm)
2112 (54.6 cm)
2712 (69.9 cm)
5758 (146.3 cm)
8314 (211.5 cm)
3
14.6 (1.35 sq m)
26 (66.0 cm)
571116 (146.5 cm)
2112 (54.6 cm)
2712 (69.9 cm)
5758 (146.3 cm)
8314 (211.5 cm)
6
29.2 (2.71 sq m)
115/60/1
3
8.0
9.0 (2 lamps)
115/60/1
3
10.3
12.2 (3 lamps)
R-134a
2220 (13 HP)
R-134a
4200 (12 HP)
35 (89 cm)
43 (109 cm)
8312 (212 cm)
73 (2068 cu l)
345 (156 kg)
435 (197 kg)
305 (138 kg)
395 (179 kg)
63 (160 cm)
43 (109 cm)
8312 (212 cm)
131 (3711 cu l)
550 (249 kg)
690 (313 kg)
480 (218 kg)
620 (281 kg)
Refrigeration System
A top mounted, self-contained, balanced refrigeration system using R-134a
refrigerant is conveniently located behind the one piece louver assembly. It features
an easy to clean front facing condenser, thermostatic expansion valve, air-cooled
hermetic compressor, plenum effect blower coil, large, high humidity evaporator coil
located outside the food zone and a top mounted non-electric condensate
evaporator. Biased return air duct protects against introduction of warm kitchen air,
promoting even temperature maintenance and efficient operation. A 9' cord and
plug is provided. Standard operating temperature is 34 to 38F.
Controller
The easy to use water resistant INTELA-TRAUL microprocessor control system is
supplied standard. Unit is NAFEM Data Protocol communication (NDP) ready.
Optional hardware required to be NDP compliant. Third party software required for
network connection. It includes a 3-Digit LED Display, Fahrenheit or Celsius
Temperature Scale Display Capability, and an RS485 data port. In addition it
includes audio/visual alarms for: Hi/Lo Cabinet Temperature, Door Open, Clean
Condenser, Evaporator Coil and Discharge Line Sensor Failures, and Power Supply
Interruption.
Interior
Standard interior arrangements include three (3) chrome plated wire shelves per
section, mounted on shelf pins. Shelves are full-width, and do not have any large
gaps between them requiring the use of "bridge" or "junior shelves." Recommended
load limit per shelf should not exceed 225 lbs. Both standard and optional
interior arrangements are completely installed at the factory.
Warranties
Both a one year parts and labor warranty and a five year compressor warranty (selfcontained models only) are provided standard. An optional 2nd year extended parts
and labor warranty is also available. In addition the INTELA-TRAUL control is
warranted by a two year parts and labor warranty.
Elevation R/AHT126WUT
NOTES
NOTE: Figures in parentheses reflect metric equivalents.
1= Area of standard shelf compliment only, does not include storage area of additional shelves or available
on cabinet bottom.
2= Amp figure shown as supplied with standard incandescent lighting.
3= Amp figure shown as supplied with optional fluorescent lighting, note that 2-section models will be
supplied with a NEMA 5-20P plug as a result.
4= Based on a 90 degree F ambient and 20 degree F evaporator.
5= For approximate remote weights deduct 40 lbs. from respective net or gross weight. For other information
on remote models, please refer to spec sheet 12-2.
Plan R/AHT126WUT
Plan - R/AHT226WUT
NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any
additional warranties.
Continued product development may necessitate specification changes without notice.
Part No. TR35830 (revised 4/04)
SECTION
11-5
Elevation R/AHT226WUT
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
Website: www.traulsen.com
ITEM NO.:
QUANTITY:
242
1
TRAULSEN/HOBART
MODEL:
RET232N-ZCF01
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
[
[
] SPARE NUMBER
] BY PURVEYOR
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
Project
Quantity
Item #
Model Specified:
R
SERIES
Models
RET232NUT-FHS
The R-Series N-Width Even Thaw Refrigerator is designed especially to thaw frozen food product under safe,
temperature controlled conditions. This model is
equipped standard with tray slides to accommodate either: one (1) 18" x 26" or two (2) 14" x 18" pans per pair
of tray slides. It can be used to thaw either full or partial
loads of frozen food product.
NOTE: Using this refrigerator for storage of uncovered
product is not recommended.
Model RET232NUT-FHS
Standard Features
Stainless Steel Exterior
Stainless Steel Interior
Full Length Stainless Steel Doors
Self-Closing Doors With Stay Open Feature At 120 Degrees
Guaranteed For Life Cam-Lift Hinges
Guaranteed For Life Horizontal Work Flow Door Handle
Stainless Steel Breaker Caps
Twenty Eight (28) #1 Type Tray Slides 4" O.C. (14 per
section)
Automatic Non-Electric Condensate Evaporator
Exterior Mounted Dial Thermometer
Magnetic Snap-In Door Gaskets
Cord & Plug Attached
Set Of Four (4) 6" High Casters
1 Year Parts And Labor Warranty
5 Year Compressor Warranty
Approval: __________________________________
Chick-fil-A #3
Reach-In Even-Thaw
Refrigerator Model
Project
Quantity
Model Specified:
Item #
CSI Section 11400
Specifications
Construction, Hardware and Insulation
Cabinet exterior, including front, one piece sides, louver assembly and doors are
constructed of heavy gauge stainless steel. Cabinet interior and door liners are constructed of stainless steel. Exterior cabinet top, back and bottom are constructed of
heavy gauge aluminized steel. Adjustable 6" high stainless steel legs are included.
Doors are equipped with removable plug cylinder locks and guaranteed for life camlift, gravity action, self-closing metal, glide hinges with stay open feature at 120 degrees. Guaranteed for life, work flow door handle is mounted horizontally over recess in door which limits protrusion from door face into aisleways.
Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Anti condensate heaters are located behind each door opening.
Cabinet and door contains high density, non-CFC, foamed in place polyurethane
insulation.
DIMENSIONAL DATA
Net capacity cu. ft.
Length - overall in.
Depth - overall in.
Depth - over body in.
Depth - with door open
90 degrees in.
Clear door width in.
RET232NUT-FHS
46.0 (1303 cu l)
5218 (132.4 cm)
35 (88.8 cm)
32 (81.3 cm)
5534 (141.6 cm)
Refrigeration System
A top mounted, self-contained, balanced refrigeration system using R-134a refrigerant is conveniently located behind the one piece louver assembly. It features a plenum effect blower coil, large, high humidity evaporator coil located outside the food
zone, and a top mounted non-electric condensate evaporator. Heaters and fans
mounted in the mullion facilitate the Even-Thaw process. Standard operating temperature is 37 to 41F.
Interior
Standard interior arrangements include twenty eight (28) #1 tray slides 4" O.C., fourteen per section. Each pair of tray slides can accommodate either: (1) 18" x 26" or (2)
14" x 18" pans.
Warranties
The standard warranty includes a five year compressor warranty and a one year
parts and labor warranty on all components and the cabinet.
115/60/1
3
16.0
R-134a
5120 (34 HP)
63 (160 cm)
43 (109 cm)
83 12 (212 cm)
131 (3711 cu l)
560 (254 kg)
700 (318 kg)
NOTES
NOTE: Figures in parentheses reflect metric equivalents.
1=Wattage is determined by listed amps X listed volts X an average run time
of 70% for refrigerators and 80% for freezers.
2=Based on a 90 degree F ambient and 20 degree F evaporator.
NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and
any additional warranties. For fast order entry: Fax 1 (800) 765-8728.
Continued product development may necessitate specification changes without notice.
Part No. Chick-fil-A #3 (revised 4/03)
Chick-fil-A #3
Reach-In Even-Thaw
Refrigerator Model
ITEM NO.:
QUANTITY:
DESCRIPTION:
BUN TOASTER
MANUFACTURER:
MODEL:
297-T12PHH
246
1
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
[
[
] SPARE NUMBER
] BY PURVEYOR
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
297 SERIES
SLIM-LINE VERTICAL
CONTACT TOASTER
STANDARD FEATURES
Delivers higher speeds and temperature while
maintaining proven reliable design
297-0800
297 SERIES
297 SERIES
SLIM-LINE VERTICAL
CONTACT TOASTER
SPECIFICATIONS
DIMENSIONS
2'(/
180%(5
:,'7+
,1 &0
7
(6&5,37,21
'
+(,*+7
,1 &0
'(37+
,1 &0
+,33,1* :7
/% .*
73
7
7
7)&(
73)&(
7)&(
7)&(
ELECTRICAL
/8*
80%(5
/8*
21),*
2'(/ 180%(5
2/76
$776
036
3
&((
&
+7
+73
+7
+7
+7)&(
+73)&(
+7)&(
+7)&(
PRODUCT
OUTPUT
25.50
(64.77cm)
02'(/
180%(5
7
25.67
(65.2cm)
297 SERIES
3.11
(7.9cm)
8.62
(21.9cm)
2.19 (5.56cm) TO
CENTER OF POWERCORD
%816+285
73
7
7
ITEM NO.:
QUANTITY:
247
2
DESCRIPTION:
MANUFACTURER:
TOASTMASTER
MODEL:
3B80A
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
[
[
] SPARE NUMBER
] BY PURVEYOR
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
Foodservice Equipment
Job_________ Item#_________
MODEL
DRAWER DIMENSIONS
WEIGHTS
WIDE
DEEP
HIGH
LONG
WIDE
DEEP
150F
175F
3A80A
29.1875"
(741.3625)
19.2187"
(488.1549)
10.875"
(276.225)
13.4375"
(341.3125)
22.5625"
(573.0875)
5.25"
(133.35)
INSTALLED SHIPPING
18.8
26.2
72
84
3B80A
29.1875"
(741.3525)
19.2187"
(488.1549)
21.75"
(552.45)
13.4375"
(341.3125)
22.5625"
(573.0875)
5.25"
(133.35)
18.8
26.2
125
144
3C80A
29.1875"
(741.3625)
19.2187"
29.3125"
(488.1549) (744.5375)
13.4375"
(341.3125)
22.5625"
(573.0875)
5.25"
(133.35)
20.6
28.2
171
186
Capacity
3A80A
120V
TOTAL kW
208V
230V
240V
120V
3A80A
.45
.40
.47
.54
3.91
1.97
1.96
1.96
3B80A
1.00
.90
1.00
1.2
8.70
4.33
4.35
4.33
3C80A
1.35
1.2
1.35
1.6
11.74
5.87
5.87
5.88
3B80A
Application
Insulation
General Information
Electrical
Construction
3C80A
Printed in U.S.A.
10/99
Form 203
Agency Data
Hot Food Servers are Underwriters
Laboratories, Inc. listed; NSF and Canadian
Standards Association* certified.
*CSA listed models are available through
Canadian Distributors only.
No Quibble Warranty
Warranty includes one year parts and
labor, on-site service. (U.S.A. only).
Heating
Ordering Information
Controls
Temperature is regulated by a hydraulic
thermostat adjustable from 100 to
A MIDDLEBY COMPANY
Toastmaster, in line with its policy to continually improve its products, reserves the right to change materials or
specifications without notice. Such revisions do not entitle the buyer to corresponding changes, improvements,
additions, or replacements for previously purchased equipment.
Form 203
A.
B.
FRONT VIEW
NOTE: IF FLAT PLATFORM IS USED, TOP SURFACE SHOULD ALSO BE .0625" (1.5875)
BELOW BOTTOM EDGE OF OPENING.
TOP VIEW
Plate
IDID
PLATE
3A80A
3B80A
ID PLATE
3C80A
3B80A
SIDE VIEW
ID PLATE
3A80A
Printed in U.S.A.
10/99
3B80A
Form 203
3C80A
3C80A
Printed in U.S.A.
10/99
Form 203
A.
B.
FRONT VIEW
NOTE: IF FLAT PLATFORM IS USED, TOP SURFACE SHOULD ALSO BE .0625" (1.5875)
BELOW BOTTOM EDGE OF OPENING.
TOP VIEW
Plate
IDID
PLATE
3A80A
3B80A
ID PLATE
3C80A
3B80A
SIDE VIEW
ID PLATE
3A80A
Printed in U.S.A.
10/99
3B80A
Form 203
3C80A
3C80A
Printed in U.S.A.
10/99
Form 203
Foodservice Equipment
Job_________ Item#_________
MODEL
DRAWER DIMENSIONS
WEIGHTS
WIDE
DEEP
HIGH
LONG
WIDE
DEEP
150F
175F
3A80A
29.1875"
(741.3625)
19.2187"
(488.1549)
10.875"
(276.225)
13.4375"
(341.3125)
22.5625"
(573.0875)
5.25"
(133.35)
INSTALLED SHIPPING
18.8
26.2
72
84
3B80A
29.1875"
(741.3525)
19.2187"
(488.1549)
21.75"
(552.45)
13.4375"
(341.3125)
22.5625"
(573.0875)
5.25"
(133.35)
18.8
26.2
125
144
3C80A
29.1875"
(741.3625)
19.2187"
29.3125"
(488.1549) (744.5375)
13.4375"
(341.3125)
22.5625"
(573.0875)
5.25"
(133.35)
20.6
28.2
171
186
Capacity
3A80A
120V
TOTAL kW
208V
230V
240V
120V
3A80A
.45
.40
.47
.54
3.91
1.97
1.96
1.96
3B80A
1.00
.90
1.00
1.2
8.70
4.33
4.35
4.33
3C80A
1.35
1.2
1.35
1.6
11.74
5.87
5.87
5.88
3B80A
Application
Insulation
General Information
Electrical
Construction
3C80A
Printed in U.S.A.
10/99
Form 203
Agency Data
Hot Food Servers are Underwriters
Laboratories, Inc. listed; NSF and Canadian
Standards Association* certified.
*CSA listed models are available through
Canadian Distributors only.
No Quibble Warranty
Warranty includes one year parts and
labor, on-site service. (U.S.A. only).
Heating
Ordering Information
Controls
Temperature is regulated by a hydraulic
thermostat adjustable from 100 to
A MIDDLEBY COMPANY
Toastmaster, in line with its policy to continually improve its products, reserves the right to change materials or
specifications without notice. Such revisions do not entitle the buyer to corresponding changes, improvements,
additions, or replacements for previously purchased equipment.
Form 203
ITEM NO.:
QUANTITY:
DESCRIPTION:
MANUFACTURER:
DUKE
MODEL:
FWM3-22CF5-120
253
1
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
[
[
] SPARE NUMBER
] BY PURVEYOR
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
11092
Specifications
F.O.B Sedalia, Missouri 65301
Approval Stamp(s):
PRODUCT INFORMATION:
PROJECT: ____________________________
ITEM:
____________________________
QUANTITY: ____________________________
MODEL:
FWM-22
OPTIONS:
FWM3-13
1 down, 3 across
FWM3-14
1 down, 4 across
FWM3-21
2 down, 1 across
FWM3-22
2 down, 2 across
FWM3-23
2 down, 3 across
FWM3-24
2 down, 4 across
FWM3-42
4 down, 2 across
FWM3-51
5 down, 1 across
BODY:
Stainless Steel Exterior construction for durability and ease of
construction
Annodized aluminum surface, durable and easily cleaned
Fully radiused curved corners that are easily cleaned
No removable parts or screws or fasteners to clean around
Cool to the touch thermoplastic front panel
Interchangable plastic lids designed for product flexibility
Amber pans allows for visibility to easily check on inventory status
HEATING:
Flexible 300 Watt heaters for 208/ 230/ 240 volt
Flexible 200 Watt heaters for 120 volt
Individually controlled rows for customized heating solutions
Quick heat up appoximately 15 minutes
AGENCY LISTING:
PHU-01
CONTROLS
Ability to control different day parts
Web based programming
Upload programs through USB port no manager reprogramming
necessary
Automatic Pan linkability for product freshness
Timer to ensure no expired product is to be served
Simplistic system makes it easy for employees to use and
easy to manage
Alphanumeric displays are easy to read
Crated
2 3/4
6.9 cm
FWM3-22-100
91 lbs / 41.4 Kg
100
8.0
800
50/60
FWM3-22-120
91 lbs / 41.4 Kg
120
6.7
800
50/60
5.8
1200
50/60
5.0
1200
FWM3-13
50/60
1 down, 3 across
FWM3-14
1 down, 4 across
FWM3-21
2 down, 1 across
FWM3-22
2 down, 2 across
FWM3-23
2 down, 3 across
FWM3-24
2 down, 4 across
FWM3-42
4 down, 2 across
FWM3-51
5 down, 1 across
FWM3-22-230
FWM3-22-240
1
2.4 cm
208
230
91 lbs / 41.4 Kg
240
5.2
1200HOLDING
50/60
PRODUCT
1 3/8
3.6 cm
1
2.4 cm
UNIT
11 3/4"
29.7cm
2 3/4
6.9 cm
20 3/4"
[53]
15 7/8"
40.2cm
TOP
SIDE
FRONT
FRONT
END
Patent
1 Info:
cm
US 6175099; US 2.4
6262394;
US RE 40, 290;
Height
Width
Depth
Pan Size
11 3/4" CA 2,367,679
SG 83896; CN ZL00805894.6; SK 0509521; EP 1164852;
29.7cm
L
W
H
Model
Pending
in. Other
cm U.S.
in. and
cmForeign
in. Patents
cm
DIMENSIONS:
in.
FWM3-13
FWM3-14
FWM3-21
FWM3-22
FWM3-23
FWM3-24
cm
in.
Cube
ft.
crated
in.
cm
7
17.8
29
73.7
16
40.2
12.7
42.4
6.9
17.5
Duke
Manufacturing
Company
7
17.8
37
94
16
40.2
12.7
42.4
6.9
17.5
2.5
5.1
2.5
5.1
2.5
5.1
7.9
20 3/4"
[53]
Crated ShipWeight
lbs.
kg
8.3
75
34.1
10.2
111
50.5
145
65.9
15 7/8"
40.2cm
2305
N. Broadway
St. Louis,
MO42.4
63102
12
30.5
14
35.6 16
40.2
12.7
6.9
17.5
2.5 FRONT
5.1
3.4
67
30.5 END
157949A
Patent Info:
1-800-735-3853
314-231-1130
314-231-5074
12
30.5
21
53.3
16
40.2
12.7
42.4
6.9
17.5
2.5
5.1
6.6
91
41.4
TOP
US 6175099; US 6262394; US RE 40, 290
www.dukemfg.com
12
30.5
29
73.7
16
40.2
12.7
42.4
6.9
17.5
2.5
5.1
8.3
113
51.4
SG 83896; CN ZL00805894.6; SK 0509521; EP 1164852
12
30.5
37
94.0
16
40.2
12.7
42.4
6.9
17.5
2.5
5.1
10.2
141
64.1
Other
U.S.
and Foreign
Patents
Pending
FWM3-42
22
55.9
21
53.3
16
40.2
12.7
42.4
6.9
17.5
FWM3-51
27
68.6
14
35.6
16
40.2
12.7
42.4
6.9
17.5
Model
cm
ELECTRICAL SPECIFICATIONS:
91 lbs / 41.4 Kg
91 lbs / 41.4 Kg
2 3/4
6.9 cm
TOP
Catalog No. PHU - FWM3
1 3/8
3.6 cm
FWM3-22-208
11 3/4"
29.7cm
2.5
5.1
8.5
125
56.8
Duke
Manufacturing
Compa
3/4"
208 Volt - HZ 50/6020[53]
230 Volt - HZ 50/60
1-800-735-3853
Watts
Amps
FWM3-13
600
5.2
FWM3-14
800
6.7
FWM3-21
600
6.0
5-15P
600
5.0
FWM3-22
800
8.0
5-15P
800
6.7
10.0
5-15P
1800
FWM3-23
1200
FWM3-24
1600
16.0
5-15P
1600
13.3
5-15P
2400
Duke
11.5
6-15P Manufacturing
2400
10.4
7/7
2400 Company
10.0
6-15P
FWM3-42
1600
16.0
5-15P
1600
13.3
5-15P
2400
11.5
FWM3-51
1000
10.0
5-20P
1000
8.3
5-15P
1500
8.7
6-15P
1800
7.8
7/7
1800
7.5
6-15P
6-15P
2400
10.4
2400
10.0
6-15P
2305
N. Broadway
7/7
St. Louis,
MO
63102
7.2
6-15P
1500 6.5
7/7
1500 314-231-5074
6.3
6-15P
1-800-735-3853
314-231-1130
www.dukemfg.com
05/09
Printed in U.S.A
2009, Duke Manufacturing Co.
ITEM NO.:
254
QUANTITY:
DESCRIPTION:
TIMER
MANUFACTURER:
INTEGRATED CONTROL
MODEL:
990925
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
UTILITY REQUIREMENTS:
ELECTRICAL:
120V, PLUG
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
11092
[
[
] SPARE NUMBER
] BY PURVEYOR
Chick-fil-A Timer
Mounting Bracket
Power Supply
Install Accessories
Chick-fil-A Timer
ChikfilA Timer
Contact
SPECIFICATIONS
TECHNICAL SUPPORT
John Patti
JPatti@goicc.com
Phone: 1.877.ICC.8788 Ex. 325
Fax: 631. 673.6756
www.goicc.com
WARRANTY
ICC provides an 12-month factory warranty
for the Chick-Fil-A Timer. If a user detects
a problem, a call is made to the ICC Hotline. If an ICC technician determines that
hardware must be replaced, ICC will ship a
replacement component to the restaurant
via overnight delivery.
TM
Temperature
Temp Minder
TM
Hygiene
Time
TM
Wash Minder
Product Management
TM
Kitchen Minder
TM
ITEM NO.:
QUANTITY:
DESCRIPTION:
FRENCH FRYER
MANUFACTURER:
HENNY PENNY
MODEL:
OFE321.02
255
2
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
[
[
] SPARE NUMBER
] BY PURVEYOR
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
PROJECT
QUANTITY
Open fryers
MODEL
General Information
Henny Penny open fryers offer highvolume frying with programmable
operation, oil management functions
and fast, easy filtration.
The OFE-321 open fryer is available
with a full vat or a split vat
configuration. The split vat choice
allows you to fry different products in
completely separate environments at
the same timea great way to
multiply your profits with one fryer.
Henny Penny 320 series open
fryers recover temperature very
quickly and have earned the
Standard Features
Stainless steel construction for
easy-cleaning and long life.
Heavy-duty stainless steel
rectangular fry pot with 7-year
warranty.
COMPUTRON 8000 control
(additional charge.)
12 programmable cook cycles
Melt mode
Idle mode
Load compensation
Proportional control
Optional filter prompt and
customizable filter tracking
Clean-out mode.
16-character digital display with
multiple language settings.
Split vat model available.
APPROVED
APPROVED AS NOTED
AUTHORIZED SIGNATURE
ITEM NO
OFE-321 electric
RESUBMIT
DATE
800 417.8417
800 417.8434 Fax
www.hennypenny.com
2008 Henny Penny Corporation, Eaton, OH 45320 USA 06/08/09
PROJECT
ITEM NO
Open fryers
MODEL
OFE-321 electric
Electrical connection
PLAN
FRONT
Dimensions
Width
17 3/8 in. (441 mm)
Depth 37 3/8 in. (949 mm)
Height 44 in. (1118 mm)
Oil capacity
Full vat: 32 qts. or 65 lbs. (30.3 l or 30 kg)
Split vat: 12.4 qts. or 25 lbs. (11.7 l or 11.4 kg)
Required clearances
Sides: 6 in. (152 mm) air flow
Back: 6 in. (152 mm) air flow, connections
Front: 30 in. (762 mm) filter pan removal
Electrical
Crated dimensions
Length 40 in. (1016 mm)
Depth 25 in. (635 mm)
Height 52 3/4 in. (1340 mm)
Volume 30.5 cu. ft. (0.86 m)
Net weight
N/A
Crated weight: 281 lbs. (128 kg)
Volts
208
220-240
240
380-415
400
480
Phase
Cycle/Hz
Watts
3
3
3
3
3
3
60
50/60
60
50/60
50-60
60
14400
14400
14400
14400
14400
14400
Laboratory certifications
Amps
Full vat Split vat
39.9
37.2
37.2
21.7
20.9
17.5
38.9
33.7
20.4
Wire
3+G
3+G
3+G
3NG
3NG
3+G
NOTE: Power cord and plug must be installed on site by a qualified electrician.
Heating
Immersed elements
Max output:14.4 kW
Bidding Specifications
Provide Henny Penny model OFE-321
single-well electric open fryer with
available built-in filtration system
(additional charge.)
Units can be ordered with full or split vat.
Units shall incorporate either
Units qualify for the ENERGY STAR mark. Units with filtration system ship with stainless
steel Max filtration screen and 2 PHT filter
Immersed fixed heating elements provide for
envelopes. All units ship with choice of full
a cold zone that extends oil life.
basket or 2 half baskets.
Units controller provides for programmable
or manual operation with press-key controls
www.hennypenny.com
2008 Henny Penny Corporation, Eaton, OH 45320 USA 06/08/09
ITEM NO.:
QUANTITY:
DESCRIPTION:
PRESSURE FRYER
MANUFACTURER:
HENNY PENNY
MODEL:
PFE500.02
256
3
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
[
[
] SPARE NUMBER
] BY PURVEYOR
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
PROJECT
QUANTITY
Pressure fryers
ITEM NO
MODEL
General Information
Henny Penny first introduced
commercial pressure frying to the
foodservice industry 50 years ago.
Today, Henny Penny pressure fryers
continue to lead the industry in
performance, durability and
innovation.
Frying under pressure enables
lower cooking temperatures and
faster cooking times. The additional
pressure also helps seal in the foods
natural juices and reduce absorption
of frying oil into product. Results of
pressure frying generally produce a
product with less fat and more
original flavor than other methods of
frying.
Henny Penny pressure fryers
incorporate several beneficial design
features, including rectangular fry pot,
cold-zone, color-keyed locking
spindle, heavy duty lid hinge, raised
edge on fryer deck and more.
PFE-500 Electric
Standard Features
Accessories shipped with unit
APPROVED
APPROVED AS NOTED
AUTHORIZED SIGNATURE
2006 Henny Penny Corporation, Eaton, OH 45320 USA Revised 11/11/09
RESUBMIT
DATE
PROJECT
ITEM NO
Pressure fryers
PFE-500
MODEL
Electric
Electric power
48 in.
(1219 mm)
PLAN
FRONT
19 1/8 in. (486 mm)
Dimensions
Height: 48 in. (1219 mm)
Width:
19 1/8 in. (486 mm)
Depth:
38 7/8 in. (968 mm)
Capacity
Product
14 lbs. (6.4 kg)
Oil
48 lbs. (22.4 l)
Electrical
Required clearances
Top:
16 in. (400 mm) for lid up
Sides:
6 in. (152 mm) air flow
Back:
6 in. (152 mm) air flow
Front:
30 in. (762 mm) filter pan removal
Crated dimensions
Length: 44 1/2 in. (1130 mm)
Depth:
21 3/4 in. (550 mm)
Height: 56 in. (1420 mm)
Volume: 31.4 cu. ft. (0.88 m)
Net weight
Crated weight:
Laboratory certifications
N/A
325 lbs. (148 kg)
Pressure
Operating pressure: 12 psi.
Safety valve setting: 14.5 psi.
Volts
Phase
Cycle/Hz
1
3
1
3
1
3
3
3
3
3
50 or 60
50 or 60
60
60
50 or 60
50 or 60
50 or 60
50 or 60
50
60
190-208
190-208
208
208
220-240
220-240
220/380
240/415
380-415
480
Amps
11250W
54.0
32.0
54.0
32.0
52.0
30.0
17.1
18.6
17.1
14.0
Wire
13500W
65.0
38.0
65.0
38.0
58.0
33.0
20.5
18.8
18.8
16.0
Plug type:
NEMA 15-50 P
2+G
3+G
2+G
3+G
2+G
3+G
4+G
4+G
3NG
3+G
G
X
Z
Y
Heating
3 immersed elements
3750W each (11250W total)
4500W each (13500W total)
Bidding Specifications
spindle, locking mechanism, filter drain pan
the pot. This design produces a cold zone that
and various fittings are stainless steel. Fry
extends suitable oil life.
Provide Henny Penny Model PFE-500
pot is heavy duty stainless steel. Lid is
electric pressure fryer, 15 lbs. (6.4 kg)
Units controller provides for programmable or
aluminum alloy.
capacity per load, and built-in filtration
manual operation with press-key controls and
Three low-wattage electric elements encircle Units will include 4 heavy-duty casters, 2 locking.
or COMPUTRON 8000 control system
the inside of the fry pot part-way up the side, Units will be shipped with starter kit of choice of
(additional charge.)
and are not located on the bottom or below
Materialscabinet, deck, exhaust stack,
filtering media.
Continuing product improvement may subject specifications to change without notice.
Henny Penny Corporation
PO Box 60 Eaton OH 45320 USA
+1 937 456.8400
+1 937 456.8434 Fax
800 417.8417
800 417.8434 Fax
www.hennypenny.com
2006 Henny Penny Corporation, Eaton, OH 45320 USA Revised 11/11/09
ITEM NO.:
QUANTITY:
DESCRIPTION:
CHARGRILL
MANUFACTURER:
TAYLOR
MODEL:
QS-11
257
1
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
[
[
] SPARE NUMBER
] BY PURVEYOR
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
Item No.
_______________________________
Electric Grill
Features
Cook-to-order menu items are served FAST!! With the
optional platen lowered, the top and bottom of the product
are cooked simultaneously. Foods maintain natural juiciness,
and your customers are served food hot off the grill, in less
than half the time of standard grills.
Even temperatures across the entire cooking surface assures
safe product integrity and fast recovery. Holding cooked food
products for busy times is virtually unnecessary, reducing
product waste. Multiple grills may be installed side-by-side
to increase cooking surface and capacities.
Lower Cooking Surface
One, 12 (305 mm) wide, by 24 (610 mm) deep cooking zone with
three independently controlled heating elements. Assures even
temperatures and quick recovery.
Controls
Programmable microprocessor controls make menu selection
simple. Includes a self-diagnostic feature for serviceability. Clear
plastic door protects control from splashes or spills. Separate
durable start button is provided to activate cooking cycle.
Temperature Control
Grill surface temperature may be set from 150 to 400F (65 to
205C). Optional upper platen temperature may be set from 150 to
425F (65 to 218C).
Indicator Lights
Lights illuminate when heaters are on.
International Office
Taylor Company S.r.l.
Roma, Italy
Tel: +39-06-420-12002 Fax: +39-06-420-12034
e-mail: romeoff@taylor-company.com
QS11
QS11
QS11Electric Grill
QS11
1/ 2
(13)
11-1/8
(283)
59-11/16
(1516)
30-60
24 (609.6)
DEEP COOK SURFACE
26
(661)
COOKING
SURFACE
38-3/8
(975)
32
(813)
COOKING
SURFACE
5
(127)
31-7/16 (799)
2-3/4 (70)
1-3/16 (30)
36-5/32 (918)
12-9/16 (319)
39-1/2 (1003)
Weights
Net
Crated
9-3/4 (248)
Volume
lbs.
440
523
cu. ft.
32.6
kgs.
199.6
237.2
cu. m.
0.92
Dimensions
Width
Depth
Height
Counter Clearance
in.
12-9/16
39-1/2
38-3/8
5
mm.
319
1003
975
127
Specifications
Electrical
One dedicated electrical connection is required. See the Electrical chart for
the proper electrical requirements.
Clearance
Grill clearance must be maintained at least 3 (76 mm) from all combustible
materials, and 3 (76 mm) of air clearance in the rear.
Options
Electrical
Total
Amps
Maximum
Fuse Size
Minimum
Circuit Ampacity
Poles (P)
Wires (W)
208/60/3
27
50
28
3P 4W
Upper Platen
The upper platen has a cooking surface of 11 X 20 (279 X 508 mm) with
three individually controlled heaters. An infinite gap adjustment will
accommodate varying product thicknesses from zero to 7/8 (22 mm).
Release Material
Completely covers and protects upper platen surface, prevents product from
sticking and minimizes carbon build-up. Attachment method ensures that the
release material stays in place throughout the day for easy cleaning.
Bidding Specs
Electrical: Volt ___________________ Hz__________ ph _________
Neutral: n Yes n No
Options:_________________________________________________
_________________________________________________________
Taylor Company,
a division of Carrier Commercial Refrigeration, Inc.
Rockton, Illinois 61072
815-624-8333 800-255-0626 Fax 815-624-8000
www.taylor-company.com
Printed in U.S.A.
057930ADV
01/03
ITEM NO.:
QUANTITY:
DESCRIPTION:
CONVECTION OVEN
MANUFACTURER:
LANG
MODEL:
9PR30CAPF208 CF
263
1
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
[
[
] SPARE NUMBER
] BY PURVEYOR
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
FULL GRIDDLE TOP
HGD LEFT
Item No.
Project
Quantity
PERFORMANCE FEATURES
SHORT/BID SPECIFICATION
A 30 wide heavy duty electric heated unit with five half size pan
capacity convection oven base and 15.6-16.8-kW total power
input; all stainless steel exterior; fully insulated oven with
stainless steel interior, heavy duty door hinged left, with double
pane viewing window and five chrome plated oven rack standard;
choice of: -AP [solid state knob-set] or PT [touch-pad
programmable] oven controls, with individual cook-top
component controls; plus all the features listed and
options/accessories checked:
R30C-APA
R30C-APB
R30C-APC
R30C-APD
R30C-APE
Oven Base:
Convection
Convection
Convection
Convection
Convection
18 wide
Griddle:
French Plates:
18 wide
4 each
2 each
2 each
1 each
2 each
Hot Plates:
1 each
Pictogram:
[Unit Top View]
INSTALLATION REQUIREMENTS
[Front View/Elevation]
[Top View/Plan]
Weight
Model
Clearance from
combustible surface
Actual
Shipping
R30C_
32 x 30.2 x 30
812.8mm x 766mm x 762mm
Sides: 3 (77mm)
Back: 3 (77mm)
362* lbs.
165 kg
412* lbs.
187 kg
Freight
Class
85
* Depending on configuration.
Model
R30C_
Voltage
208V/60Hz
240V/60Hz
208V/60Hz
240V/60Hz
480V/60Hz
E Electrical Requirements
Total kW
19.8
19.8
19.8
19.8
19.8
Phase
Amps/Line
1
1
3
3
3
95.2
82.5
57.6
50.0
25.0
LANG MANUFACTURING - A DIVISION OF STAR MANUFACTURING INTL, INC. 10 SUNNEN DR. ST. LOUIS, MO 63143
TOLL FREE: 800.264-7827 FAX: 314-781-3636 www.langworld.com
2005 Lang Manufacturing Company
ITEM NO.:
QUANTITY:
DESCRIPTION:
MANUFACTURER:
HOBART/TRAULSEN
MODEL:
HL200
272
1
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
[
[
] SPARE NUMBER
] BY PURVEYOR
Item # _____________________________________
Quantity ___________________________________
C.S.I. Section 11400
LEGACY
HL200 MIXER
STANDARD FEATURES
MODELS
Gear Transmission
Three Fixed Speeds Plus Stir Speed
Shift-on-the-Fly Controls
Patented soft start Agitation Technology
OPTIONS
15-Minute SmartTimer
Page 1 of 4
LEGACY
HL200 MIXER
SOLUTIONS/BENEFITS
2 H.P. Motor
Durability
Heavy-duty to meet the most demanding
operations
Gear Transmission
Durability, Reliability
Ensures consistent performance and minimum
downtime under heavy loads
Three Fixed Speeds plus Stir Speed
Flexibility, Reliability, Consistency
For incorporating, blending, mixing ingredients
Supports consistent results and thorough mixing
Shift-on-the-Fly Controls
Flexibility
Allows operator to change speeds while mixer is
running
Patented soft start Agitation Technology
Sanitation
Each speed has a soft transition into a higher
speed to reduce the chances of product
splash-out
15-Minute SmartTimer
Convenience, Ease of Use, Consistency
Supports recipe mixing times
Provides accurate results and eliminates
overmixing
Automatic Time Recall
Productivity, Consistency
Remembers the last time set for each speed
Great for multiple batches
Ergonomic Swing-Out Bowl
Ease of Use, Convenience
Easy loading and unloading of products
Single Point Bowl Installation allows for simple
mounting and removal of bowl
Bowl Interlock ensures mixer bowl is properly in
place for mixer to operate
Stainless Steel Bowl Guard
Protection
Safety interlock prevents operation when front
portion of guard is out of position
Hobart Accessories
Durability, Flexibility, Simplicity
Hobart Quick Release agitators allow for
simple installation and removal from agitator
shaft
Hobart accessories are designed for long-term
usage under heavy-duty conditions
Large array of accessories provide multiple uses
for recipe and product processing
Recommended Maximum Capacities - dough capacities based on 70F. water and 12% our moisture.
AGITATORS
SUITABLE FOR
OPERATION
CAPACITY OF BOWL (QTS. LIQUID)
Egg Whites
D
Mashed Potatoes
B&C
Mayonnaise (Qts. of Oil)
B or C or D
Meringue (Qts. of Water)
D
Wafe or Hot Cake Batter
B
Whipped Cream
D or C
Cake, Angel Food
(8-10 oz. cake)
C or I
Cake, Box or Slab
B or C
Cake, Cup
B or C
Cake, Layer
B or C
Cake, Pound
B
Cake, Short (Sponge)
C or I
Cake, Sponge
C or I
Cookies, Sugar
B
Dough, Bread or Roll
ED
(Lt.-Med.) 60% AR
Dough, Heavy Bread 55% AR
ED
Dough Pie
B&P
Dough, Thin Pizza 40% AR
(max. mix time 5 min.)
ED
Dough, Med. Pizza 50% AR
ED
Dough, Thick Pizza 60% AR
ED
Dough, Raised Donut 65% AR
ED
Dough, Whole Wheat 70% AR
ED
Eggs & Sugar for Sponge Cake
B & C or I
Icing, Fondant
B
Icing, Marshmallow
C or I
Shortening & Sugar, Creamed
B
Pasta, Basic Egg Noodle
(max. mix time 5 min.)
ED
PRODUCT
HL200
20
1 qt.
15 lbs.
10 qts.
112 pts.
8 qts.
4 qts.
15
20 lbs.
20 lbs.
20 lbs.
21 lbs.
15 lbs.
12 lbs.
15 lbs.
25 lbs.
15 lbs.
18 lbs.
9 lbs.
10 lbs.
20 lbs.
9 lbs.*
20 lbs.
8 lbs.
12 lbs.
2 lbs.
16 lbs.
5 lbs.
1st Speed
* 2nd Speed
3rd Speed
If high gluten our is used, reduce above dough batch size
by 10%.
2nd Speed should never be used on 50% AR or lower
products.
USE OF ICE REQUIRES A 10% REDUCTION IN BATCH SIZE.
1 gallon of water weighs 8.33 lbs.
NOTE: Attachment hub should not be used while mixing.
Page 2 of 4
LEGACY
HL200 MIXER
SPECIFICATIONS
MOTOR:
1
2 H.P. high torque motor.
100-120/50/60/1
200-240/50/60/1
BOWL LIFT:
Ergonomic style, hand crank operated, self-locking in
top and bottom position.
8.0 Amps
5.0 Amps
ELECTRICAL:
100-120/50/60/1, 200-240/50/60/1 UL Listed.
CONTROLS:
Magnetic contactor with thermal overload protection. Internally sealed Start-Stop push buttons.
A 15-minute SmartTimer is standard.
SmartTimer includes Automatic Time Recall,
which remembers the last time set for each speed.
Optional SmartPlus2 Programmable Recipe
Timer allows operators the ability to program up
to 4 recipes with 5 steps per recipe. SmartPlus2
automatically changes speeds and starts timer
count-down without operator intervention.
TRANSMISSION:
Gear-driven. Gears are constant mesh heat-treated
hardened alloy steel along with anti-friction ball
bearings. Grease lubricants furnished to all gears
and shafts.
SPEEDS:
Agitator
(RPM)
Attachment
(RPM)
Stir
59
33
First (Low)
107
61
Second (Intermediate)
198
113
Third (High)
365
207
BOWL GUARD:
Heavy-duty stainless steel wire front and solid rear
portion. Front portion of guard rotates easily to
add ingredients and install or remove agitator.
It detaches in seconds for cleaning in dishwasher or
sink. Rear portion of guard can be quickly cleaned
in position. Guard must be in closed position before
mixer will operate. Bowl support interlock provides
further protection.
FINISH:
Metallic Gray Hybrid Powder Coat nish.
ATTACHMENT HUB:
Comes with front-mounted Hobart standard #12
taper attachment hub for use with Hobart #12 size
attachments.
ATTACHMENTS AND ACCESSORIES:
The following are available at extra cost:
Stainless Steel Bowl
B Flat Beater
C Wing Whip
D Wire Whip
E Dough Hook
ED Dough Hook
P Pastry Knife
Bowl Splash Cover
Bowl Scraper
Ingredient Chute
12 Quart Accessories
9" Vegetable Slicer
Meat Chopper Attachment
Rubber Foot Pads
Attachment Tray Support
Page 3 of 4
LEGACY
HL200 MIXER
SPECIFICATIONS
ELECTRICAL SPECIFICATIONS: 100-120/50/60/1,
200-240/50/60/1 UL Listed.
WEIGHT: 189 lbs. net; 204 lbs. domestic shipping.
As continued product improvement is a policy of Hobart, specications are subject to change without notice.
Page 4 of 4
F-40089 (REV. 7/05)
ITEM NO.:
QUANTITY:
DESCRIPTION:
MANUFACTURER:
EXPOTRANS
MODEL:
FH 3EXP031
283
6
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
[
[
] SPARE NUMBER
] BY PURVEYOR
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
X
Graphic:
OD:
VO:
QTY:
19.63 X 23.81
20.63 X 24.81
19.13 X 23.31
66
Color:
Powder Coat
RAL 3020
Plexi Glass:
1/8
1/16
Non Glare
Milk
Hinge Orientation:
Top
Lamps:
Cool White
F20T12 24
0
Qty:
Qty:
3
0
Ballast:
LC1420C
0
Qty:
Qty:
3
0
Voltage:
120vlts 60hz
Wattage:
60
Amperage:
0.55
Locks:
Allen
Mounting Option:
Angle Hanging Bracket
*LI-S-S-B-HD
8/25/2004
10:16:05AM
ANV
1
Client Approval:
Date:
Power Placement:
Back Bottom Right
J Box and Power Cord
6561
8973
Quote No.:
SpecSheet No. :
*LI-S-S-B-HD
8/25/2004
10:16:05AM
ANV
Client Approval:
Date:
ITEM NO.:
QUANTITY:
DESCRIPTION:
MILKSHAKE SPINNERS
MANUFACTURER:
HAMILTON BEACH
MODEL:
HMD300M-220
736
2
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
[
[
] SPARE NUMBER
] BY PURVEYOR
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
11092
HMD300M-220
Single Spindle Mixer for Machine Mounting
6.75
19.75
6.75
Performance
1/3 HP motor delivers all the exceptional mixing of the HMD200
Operation
Powers on through a pulse-switch located on the soft-serve ice cream
machine. Two- speed sealed rocker switch controls mixing.
Precision Motor
Each motor is individually balanced to minimize vibration. Built to last
with sealed, permanently lubricated ball bearings.
Durable
All-metal, die cast construction offers durability in a smooth, rounded
shape that is easy to clean. Vent-free housing design prevents
contaminants from entering the housing and damaging the motor.
Dimensions
Length: 6.75, Width: 6.75, Height: 19.75
Ratings
NSF, Approved for Commercial Use, 220V, 60Hz, 1A
Warranty
1 Year Warranty. All service should be handled by calling Technical
Services at 866-285-1087 (or 910-693-4277.)
ITEM NO.:
QUANTITY:
DESCRIPTION:
MANUFACTURER:
KAN-PAK
MODEL:
CDG211
738
1
CONDITIONS:
[ X ] NEW EQUIPMENT
[ ] TO BE FABRICATED
[ X ] PROPRIETARY
[
[
[
] EXISTING
] NOT IN CONTRACT
]
UTILITY REQUIREMENTS:
ELECTRICAL:
PLUMBING:
VENTILATION:
SUPPLEMENTAL INFORMATION:
11092
[
[
] SPARE NUMBER
] BY PURVEYOR
Specifications:
Dispenses two products. Manual, lever operated
Capacity: 2 x 9.5 Litres/2 x 2.5 Gals
Weight: 77 lbs
Dimensions: 22 x 12 x 25 1/2 (L x W x H)
A/C Supply Voltage: 120VAC/60Hz/1P/4Amp
Refrigeration: Compressor cold wall evaporation;
accurate to 32F / 0C
Environmentally friendly 134A refrigerant. CFC-free
Rev. Feb/10
CDG-211 sheet- Part number: 50-0006-40