Академический Документы
Профессиональный Документы
Культура Документы
Bridges
Tunneling
Lightweight Structures
Pre-/Post-tensioning
Geotechnics
Steel Construction
Dynamics
Computational Fluid Dynamics
www.sofistik.com
Bridge Design
General
General 3D FE modelling
Beam, Shell, Volume, Cable, Truss, Spring and Pile Finite
Elements
Linear, 2nd order theory (P-Delta) and full geometric nonlinear
analyses
Parallel sparse-solver (32- and 64-Bit, Windows and LINUX)
Influence line evaluation with automatic enveloping (ELLA)
Transverse influence lines for multi-girder and shell systems
Dynamic and buckling eigenvalue analysis
Linear and nonlinear construction stage analysis
Automatic determination of time-dependent effects (creep,
shrinkage and relaxation)
Contact elements for ILM
Train and Rail - Bridge interaction (Rolling stock, UIC 774-3)
System/ Cross-Sections
Axis-based parametric input technology (CABD)
Graphical axis, cross-section, super- and substructure
modeling in SOFiPLUS
Automatic cross-section interpolation along bridge axes
Non-effective cross-sectional areas
Composite sections with shear connector
Cross-sectional construction stages
Pre-/Post-tensioning
Library of prestressing systems
Beam and shell prestressing
Cubic 3D spline geometry
Internal and external tendons
Friction loss calculation
Tensioning force diagrams
Loading
Load models to DIN-FB101, EN 1991-2, BS 5400, EHE,
AASHTO, UIC
Automatic loadcase combinations and superpositioning
Automatic track division relative to axis
Evaluation of load groups
Temperature, bearing change, wind and impact loading
Yamuna Birdge at Wazirabad, India
Architect: Ratan J. Batliboi, Mumbai
Structural Engineering: schlaich bergermann und partner
Design
Ultimate limit state checks (ULS)
Serviceability limit state checks (SLS)
Fatigue checks for reinforcement steel
Tunneling / Geotechnics
General
Non-linear beam, plate or volume analysis including design
Interface and contact elements
Automatic Phi-c reduction
Construction or excavation phases (TALPA CSG)
Load history
Combined systems and renovation
Seepage, groundwater flow (HYDRA)
Drained and undrained soil conditions
Earthquake and Dynamics (DYNA)
Analytical halfspace (HASE)
Halfspace stiffness according to the stiffness coefficient method
for 3D foundation simulation (soilstructure interaction)
Specification of soil parameters via bore profiles
Layer interpolation of soil properties
FE beams in the halfspace as extended piles with optional
limiting skin friction and pile foot load
Limitation of bedding stresses
Tunneling
Open construction (cut and cover)
New Austrian tunneling method
Pipe jacking, Underwater tunnels
Tunnel boring machine simulation
Sequential/segmental lining
Dynamic analysis (e.g. rockfall)
3D volume systems
Geotechnics
Excavations
Angled retaining walls (FIDES)
Dam analysis
Slope failure
Hydraulic heave
Piled foundations
Dynamic soil-structure interaction (SBFEM)
Residual stress from heat of hydration
3D settlement analysis
System input
SOFiPLUS (AutoCAD)/SOFiSTiK Structural Desktop
Parametric text input (CADINP)
WinTUBE (FIDES)
Material modeling
Von Mises (optional viscoplastic)
Drucker-Prager (optional viscoplastic)
Mohr-Coulomb
Lades law
Elasto-plastic with optimized consolidation formulation
(Hardening Plasticity Soil)
Heave/swelling
Rock
Orientated shear planes (crevasse/seam/fissure)
Non-linear concrete behavior
User-defined material modeling
Design
Integrated design for beams and shells
Reinforced concrete and structural steel checks
Non-linear beam and shell elements for realistic stiffness
simulation in construction phases
Non-linear design
Fire design for beams and shells
Dynamics
General
Parallel buckling and eigenvalue solver (32 and 64 bit)
Methods: Simultaneous Vector Iteration and Lanczos
Optional filtering for positive buckling values
Direct integration of equations of motion for time-step methods with arbitrary damping
Steady-state oscillations and excitation via spectra
Consistent/diagonalized masses and damping matrices
Spring elements, boundary and FLEX elements
Damping elements (Rayleigh)
Library of response spectra (DIN 4149, EN 1998, I-DM, SIA,
SNIP, IBC etc.)
Artificial earthquake from energy, velocity and acceleration
spectra
Sign compatible superpositioning of corresponding internal
forces for spectra
SRSS and CQC superpositioning as well as absolute additions
Harmonised CQC and SRSS superpositioning for sign
information
Stationary response with frequency spectra
Damping properties different for individual groups
Time-history with modal calculation and direct integration
Advanced Dynamics
Rolling stock
Train-bridge interaction
Dynamic contact problems
Dynamic soil-structure interaction with Halfspace (SBFEM)
Load functions for pedestrian loads
Determination of non-linear capacity spectra (Push-Over)
Dynamic wind properties for cross sections (incl. ScanlanDerivatives)
Production of artificial wind patterns for dynamic time-step
analysis in bridge construction
References
1: Hospes Huerto del Emir Hotel, Murcia Client: F.C.C. Engineering: Calter Ingeniera, Madrid
2: BC Place Stadium, Vancouver Architect: Stantec, Vancouver
Engineering: schlaich bergermann und partner
3: The Yas Hotel, Abu Dhabi Architect: Asymptote Architecture, New York
Engineering Grid-Shell: schlaich bergermann und partner
4: Massetalbrcke Client: DB Netz AG Engineering: Obermeyer, SSF Ingenieure AG,
Bchting+Streit AG
5: SOFiSTiK FE System: Prestressed Flat Slab
6: Earthquake Simulation Taiwan Highspeed Railway, Hochtief AG
7: Soil-Structure Interaction between existing Metro Tunnels and Media-Bridge Building, Munich
FE-Simulation: bwp Burggraf + Reiminger GmbH
8: FE-Earthpressure and Seepage simulation of a Liftlock at River Weser, Minden
FE-Simulation: Ingenieurbro Dr. Kupfer
9: CFD simulation for a bridge cross-section Prof. Dr.-Ing. Katz, SOFiSTiK AG
Bruckmannring 38
85764 Oberschleiheim
T +49 (0)89 315878-0
F +49 (0)89 315878-23
Burgschmietstr. 40
90419 Nrnberg
T +49 (0)911 39901-0
F +49 (0)911 397904
info@sofistik.com
www.sofistik.com
SOFiSTiK AG 2013
11/2013
SOFiSTiK AG Germany