Академический Документы
Профессиональный Документы
Культура Документы
52 MB Quality: High
The previous edition of the General Catalogue SKF was first published in 1989.Since then it
has been translated into 16 languages and sold worldwide with a total circulation of more than
1 million copies. Introduced on the latest edition of the directory resource, a new theory of
SKF became one of the major technical standards. Such widespread use and allows
professional recognition to speak about the credibility of the General Catalogue SKF across the
industry.
Subsequently, the General Catalogue was transferred to electronic format, thus improving its
accessibility and ease of use. Its electronic version called (Interaktiony indzhenerny catalog "is
available on CD, and tazhke made available on the website.
This new edition of the General Catalog also published in electronic and print formats, and
contains many bug fixes. Additions and changes designed to increase the value of the
information contained therein .
This preface presents the main sections of the catalog devoted to both theoretical issues and
technical characteristics of products, as well as other information relating to the importance of
understanding the general features SKF
General Catalogue: Overview The new edition of the General Catalogue SKF contains data for
nearly all of the standard rolling bearings and accessories that are required as producers of
industrial equipment and consumer needs for repair. to maintain the highest level of service,
SKF strives to satisfy the requirements of the standard range of most consumers, and SKF
products can be purchased in any country.
Contained in this catalog data reflect the level of technological and production potential of SKF
at the beginning of 2006. These figures may vary from those in earlier editions of the catalog
because of the change product designs, improved technology and methods of calculation.
In order to continuously improve product quality SKF reserves the right to make changes in
materials, design and production methods, and tayuke changes due to improved technology.
The units of measurement used in this catalog conform standartuISO (International
Organization for Standardization) 1000:1992 and the international system of SI units.
Theoretical part - the principles of bearing selection and application of
theoretical part covers the basics of bearing technology and knowledge necessary for the
construction of the bearing node. Sections are arranged in a manner consistent with the usual
sequence of the design engineer.
http://depositfiles.com/files/2rmj4qqve
Main sections of the manual on the bearings.
Data on the standard bearings.
The database includes data on more than 5,000 type-size standard bearings, 120, the most
common type-designs. For each bearing contains all the data necessary to calculate, design,
diagnosis and repair bearings for various purposes:
Geometric parameters of bearings ... d, (d1), D, (D1), B, (T, H), r, r1, alf;
The parameters characterizing the performance ... C, Co, Npr.p, Npr.zh, [Tet], f_tr;
Geometric parameters shoulders ... d_a, d_b, Da, Db, a, (a1, a2);
More options bearings ... m, Z, Dw, Lw, G min, G max, etc.
The database includes requests bearing number, type and performance, according to the
geometrical parameters, the parameters of efficiency. To simplify the choice of bearing type
and performance of the database includes drawings of standard bearings of all performances.
The output data for each bearing a picture accompanied with the notation of geometrical
parameters, name, number of bearing number GOST, called the series of diameters and
widths, as well as a list of possible plants - producers of bearings.
For the chosen bearing provides output data to text files, which facilitates the use of a
database in computer-aided design environment.
Library 2D
library for 2D data from the database provides the drawing about 100 type-designs of
bearings, thrust rings, spring, slotted nuts, lock washers, gaskets rubber reinforced in CAD
KOMPAS.
Characteristics of type-bearing performances
Characteristics of and recommendations for using 120 the most common type-standard
performances of bearings. Selecting the desired type-performance by the drawings of
bearings.
Identification of the bearings to the number
system analyzes the number entered, displays an appropriate type-enforcement figure,
bearing the full name and decodes the meaning of primary and secondary (left and right)
signs in accordance with GOST 3189.
Calculations
section provides:
calculation of support reactions and the angles of rotation axes of the bearing rings in
the bearings
calculation Dw, Z; calculation of Co, C according to GOST 18854-94 and GOST 1885594, respectively
calculation of longevity L10, Lna
calculate the contact deformation
calculation of geometrical parameters of the basic types of threads
(local, circular, vibrational) rings. Provide automatic prostanovka landings and precision
landing surface parameters on the drawing. Bearing types 0, 2, 6 provides a conclusion to the
number of all parameters of bearing accuracy and roughness.
Applications and dictionaries
in the application provides information on the methods of calculation of bearings, bearing
clearances, bearing bodies, the parameters of precision bearings, Spherical plain bearings,
bushings and clamping of the clamp, splined nuts and lock washers, spring-loaded thrust
rings, seals, bibliography (300 titles) , a list of existing GOST (700 titles), etc.
In dictionaries are included with the necessary information and illustrations of the data on
"bearings" and "Lubricants". Log in dictionaries via the alpha-index.
Design Options
Included in the design solutions the basic types of gears, bearings of machinery and devices
for different purposes (about 30 drawings of structures and units of knots).
Electronic directory of rolling bearings is designed for engineers and technical workers in all
industries, including user CAD systems, for students and universities. In developing the
electronic directory of state standards used for rolling bearings, as well as data books,
common directories, company (factory) directories and files.
Download ...
http://depositfiles.com/files/xobz4bf24
All the advantages of electronic directory is available: It is functional , simple and easy to
use , is available , it is always at hand, with him you save
your strength , nerves , money and most importantly time!
Future versions of "Directory" is expected to:
- Decoding of all state standards and specifications.
- Information about the applicability of the bearings.
+
Calculator frequencies of rolling bearings
Calculator is designed to calculate the characteristic frequencies generated at interaction of
elements bearing.
The results obtained by the author in testing the program have shown that the characteristic
frequencies can be accurately identify defects in the bearings in the analysis of the spectra of
the envelope as well as direct spectra. However, to effectively and correctly use the program
specialist should own theory for the diagnosis of rolling bearings, as the results of the
calculations provided by the program, only to facilitate interpretation of data and complexity of
the calculations in the analysis, but do not give a definite answer.
Download ...
http://depositfiles.com/files/7abqb1o0x
ISO
ISO
ISO
ISO Amd. 1
ISO Amd. 2
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO Cor. 1
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO Cor. 1
ISO
ISO
dimensions.
199: 1997 Rolling bearings - Thrust Ball Bearings - Tolerances.
Rolling bearings - Roller bearings Cylindrical 246: 1995
Individual thrust washers - Basic dimensions.
Rolling bearings - Dynamic load ratings and the
281: 1990
estimated design life - Part 1: Methods.
Rolling bearings - Dynamic load ratings and the
281: 2000
estimated design life - Amendment 1.
Rolling bearings - Dynamic load ratings and the
281: 2000
estimated design life - Amendment 2.
Rolling bearings - Roller bearings metric series
355: 1997
tapered, dimensions and designation of series.
Rolling bearings - Radial bearings with thrust
464: 1995
spring-ring sizes and tolerances.
492: 2002 Rolling bearings - Radial bearings - Tolerances.
582: 1995 Rolling bearings - the maximum size of facets.
683-17:
Heat-treated steel, alloy and high-speed - Part 17:
1999
Steel for ball and roller bearings.
Rolling bearings - Aircraft bearings - Characteristics,
1002: 1983
main dimensions, tolerances, evaluation capacity.
1132-1:
Rolling bearings - Tolerances - Part 1: Terms and
2000
definitions.
1132-2:
Rolling bearings - Tolerances - Part 2: Principles and
2001
methods of measurement and control.
Needle roller bearings - Light and medium series 1206: 2001
Dimensions and tolerances.
1224: 1984Rolling bearings - Instrument precision bearings.
2982-1:
Rolling bearings - Accessories Parts - Part 1:
1995
Tapered sleeves, eazmery.
2982-2:
Rolling bearings - Accessories Parts - Part 2: Lock
2001
nuts and locking devices - Dimensions.
Rolling bearings - Radial needle roller and cage
3030: 1996
assemblies-eazmery and tolerances.
Needle roller bearings - Thrust needle roller and
3031: 2000 cage assemblies, thrust washers - Dimensions and
tolerances.
Rolling bearings - Needle rollers - Dimensions and
3096: 1996
tolerances.
Rolling bearings - Needle rollers - Dimensions and
3096: 1999
tolerances - Technical Corrigendum 1.
Rolling bearings - Cast and pressed housings for
3228: 1993
bearings vkladyshnyh.
Rolling bearings - roller needle bearings with
3245: 1997 pressed outer ring without inner ring - dimensions
and tolerances.
Rolling bearings - Balls - Dimensions and
3290: 2001
tolerances.
5593: 1997Rolling bearings - Vocabulary.
5753: 1991Rolling bearings - Radial internal clearance.
Steel tool steel and bearing - Mikrofotografichesky
5949: 1983 method for estimating the distribution of carbides
using reference photomicrographs.
Lubricants, industrial oils and related products
6743-2:
(class L) - Classification, Part 2: Group F - Spindle
1981
bearings, bearings and couplings.
6811: 1998Spherical plain bearings - Vocabulary.
Spherical plain bearings - Vocabulary - Technical
6811: 1999
Corrigendum 1.
7063: 2003Roller Needle Bearings - rollers - Tolerances.
Aircraft - Ball bearings for rollers control cables,
7938: 1986
dimensions and load.
ISO
7939: 1988
ISO ISO
8443: 1999
Rolling bearings - Radial ball bearings with a board
8826-1:
on the outer ring - Dimensions of the board.
1989
8826-2:
1994
ISO
13790-1:
2004
ISO
14 190:
1998
ISO
14 191:
1998
ISO
14 192:
1898
ISO
14 195:
1998
14 201:
1998
14 202:
1998
ISO
ISO
ISO
14 203:
1998
ISO
14 204:
1998
ISO
14728-1:
2004
ISO
14728-2:
2004
15241
2001
15242-1
2004
ISO
ISO
15242-2
2004
ISO
15243
2004
15312
2003
ISO
ISO
ISO / TS
16799
1999
ISO
21 107:
2004
The SKF bearing maintenance handbook is a comprehensive working guide for the maintenance
professional. With the recommendations in this handbook, SKF aims to encourage safe and skilful
maintenance practices that can help extend bearing service life, reduce machine down-time and minimize
unplanned maintenance activities.
Basics
2.
3.
4.
5.
Mounting
6.
seals
7.
Alignment
8.
Lubrication
9.
Inspection
10.
Troubleshooting
11.
Dismounting
12.
13.
Maintenance support
14.
Appendices
15.
Index
The SKF bearing maintenance handbook is a comprehensive working guide for the maintenance
professional. With the recommendations in this handbook, SKF aims to encourage safe and skilful
maintenance practices that can help extend bearing service life, reduce machine downtime and
minimize unplanned maintenance activities.
This handbook is not intended as an application design catalogue. For detailed information about
designing bearing arrangements, refer to the SKF Interactive Engineering Catalogue, by following
the link on the right column of this page
Page: 1(3)
Results: 1-10 of 21 items
Pages: 1 2 3 << Prev | Next >>
Chapter 00. SKF bearing maintenance handbook
Foreword. SKF - the knowledge engineering company.
age: 3(3)
Results: 21-21 of 21 items
Pages: 1 2 3 << Prev | Next >>
Chapter 20. SKF bearing maintenance handbook
Appendices J-P Overviews of SKF tools and products
ink download:
Part 1: http://www.mediafire.com/?ojdd0wb5nnm
Part 2: http://www.mediafire.com/?az1jdnmuevt
Part 3: http://www.mediafire.com/?y9nvzxrmy1x
Part 4: http://www.mediafire.com/?wzvzztqzzwm
Part 5: http://www.mediafire.com/?0tynjetz3a0
Part 6: http://www.mediafire.com/?xtbmhhgtseg
Part 7: http://www.mediafire.com/?jjjdmym2nwv
Share folder: http://www.mediafire.com/?sharekey=330
Note:
- Download the 7 files on a folder and then use File Splitter & Joiner program to resume
- After the connection file, obtained a file. Iso then use any program to read the virtual disk support as
Alcohol, Ultra Iso, Demol Tool to read the file
- You can install directly to your hard drive by clicking Install, it will occupy 617 Mb or so savings should
amount to boot directly from disk.
- For further information please contact: ngocbinh_8x@yahoo.com or