Академический Документы
Профессиональный Документы
Культура Документы
Data Sheet
Technical data
Total thickness
Weight
k1% value relaxed (Effective pull at
1% elongation), established in line
with ISO 21181:2005
Breaking force
Elongation at break longitudinal
Friction coefficient of driving face
against steel panel according ISO
21182
Permissible operating temperature
Hardness of top face coating as per
DIN 53505 (Shore A)
Electrostatic
Properties
Lateral stiffness
Troughable
Suitable for accumulation
Inclined conveying
Suitable for knife edges
Suitable for curves
Flame-retardant
Noise development
The physical data in this data sheet is approximate, can alter depending on production environments and was
established at standard ambient conditions (23C/73F, 50% relative humidity) in accordance with DIN 50014/ISO
554. Fluctuations in climate can cause variations. See our brochure Technical Information 1 no. 317 which shows
the types of belts that can be supplied and the manufacturing tolerances. Customised types require written
confirmation.
900016
3000 mm
4400 mm
Yes
Polyvinyl chloride
Smooth
0,5 mm
Green (~RAL 5020)
Polyester fabric
Fabric
Transparent
Laterally flexible fabric of polyester
warp and weft
2
Staple fibre fabric with plain weave, low
noise
1,95 0,15 mm
2,3 kg/m
3,5 N/mm
85 N/mm
17,5 %
0,21
Laterally flexible
Yes
No
No
No
Yes
No
Low noise
1/2
Product
Data Sheet
Food properties
Not certificated for the transport of
unpacked food according (EU) 10/2011
and (EC) 1935/2004, FDA 21CFR or
MHLW 370.
Fabrication
Belt edge sealing
Especially suitable for corrugated
side walls
Profiles on Topface
Profiles on Underside
Mechanical fasteners
Minimum drum diameter
Stepped overlap splice with
counter-bending [mm]
Stepped Z-splice with counterbending [mm]
Z-splice with counter-bending
[mm]
Smartseal; Proseal
No
Yes
Yes
KS(S); HS-13; HS-03; HS-02; CS-05
On request
On request
24 mm
Applications
General conveying
Paper & corrugated cardboard industry
Wood industry
Remarks
Chemical resistance
The physical data in this data sheet is approximate, can alter depending on production environments and was
established at standard ambient conditions (23C/73F, 50% relative humidity) in accordance with DIN 50014/ISO
554. Fluctuations in climate can cause variations. See our brochure Technical Information 1 no. 317 which shows
the types of belts that can be supplied and the manufacturing tolerances. Customised types require written
confirmation.
2/2