Академический Документы
Профессиональный Документы
Культура Документы
SMD
potentiometer
MECHANICAL SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
265 5
Value*: 1k
240 20
Tolerance*: 30%
Torque:
Stop torque:
Mechanical life*:
up to 10K cycles
to 1M
Taper*: Linear
Nominal Power: 0.25W @ 50C (122F)
Operating temperature:
Residual resistance:
Equivalent Noise Resistance:
HOW TO ORDER
STANDARD
PSX-15
Series
PSX-15
PS-15
V50
103
OPTIONAL EXTRAS
A
3030
Mounting
Taper
Life
Detents
Wiper position
V50
V60
A = Linear
E = Long life
U= Extra Long life
PAI
PAM
PAF
P1I
P1F
P02
.
.
.
P38
PM = 50%
PF = Final
(See note 3)
(See note 2)
Rotors
Value
C
F
G
N
R
T
102 = 1k
Tolerance
3030 = + 30%
L = Low torque
(See note 4)
105 = 1M
(See note 1)
NOTES:
(1)
(2)
(3)
Extra long life: 100k cycles. Only for PS-15. To be studied case by case.
(4)
www.piher.net
Torque
= Standard
47
STANDARD OPTIONS
Detents
................................................................... None
......................................................... Black
Rotor colour
(Max. 16 digits)
...................................................................
PSX-15
This way of ordering should be used for options which are not included
in the "How to order" standard and optional extras.
Wiper position
...................................................... Initial
................................................................... Standard
Torque
PS-15
None
Dark grey
Dark grey
Initial
Standard
Reel
10K cycles
4.
05
05
4.
05
3.
3.
05
42.5
42.5
Wiper
position
Wiper
position
N=
G=
Removable shaft
or thumbwheel
Removable shaft
or thumbwheel
4.05
4.02
3.52
3.35
1.2
3.05
3.35
54
23
4.4
Rotor C
Rotor F
Rotor R
Rotor T
15
6.5
4.05
2.25
2.5
6.5
3.5
E (final)
S (wiper)
7.15
13.8
7.5
16
3.05
A (initial)
4.5
4.5
4.5
4.5
15
2.25
2.5
4.5
6.5
4.05
7.15
13.8
7.5
16
3.05
3.5
6.5
1.20 (x2)
4.5
4.5
www.piher.net
48
4.5
POSITIONING
Positioning (Std. Position = CCW)
P.M.
50% +20
P.F.
INITIAL
CCW
FINAL
CW
200C (*)
<40 s
Between 60-90 s
Room temp.
(*) Melting point temp. depends on solder properties
PSX-15 TESTS
TYPICAL VARIATIONS
ELECTRICAL LIFE
1000 h. @ 50 o C; 0.25 W
10 %
MECHANICAL LIFE*
10 %
TEMPERATURE COEFFICIENT
25 o C; +70 o C
1000 ppm
THERMAL CYCLING
16 h. @ 85 C; 2h. @ -25 C
5 %
DAMP HEAT
500 h. @ 40 o C @ 95% HR
15 %
3 %
200C (*)
30-45 s
Between 60-120 s
Room temp.
(*) Melting point temp. depends on solder properties
www.piher.net
49
PS-15 TESTS
TYPICAL VARIATIONS
ELECTRICAL LIFE
1000 h. @ 50 o C; 0.25 W
10 %
MECHANICAL LIFE
10 %
TEMPERATURE COEFFICIENT
40 o C; +85 o C
1500 ppm
25 o C; +70 o C
1000 ppm
THERMAL CYCLING
16 h. @ 90 o C; 2h. @ -40 o C
5 %
DAMP HEAT
500 h. @ 40 o C @ 95% HR
15 %
3 %
PACKAGING
39
A
360
0.2
28.4
1.
Label
20
1.75
32
28.4
14.2
5
1.
9.1
B
Elongated sprocket holes
Direction of unreeling
www.piher.net
50
PAM
P1I
P1F
P02
P03
P04
P05
P06
P07
P08
P09
P10
P11
P12
P13
application
notes
Constant value zones can be combined with strategically located stops matching the flat
areas of the output.
10 stepped outputs version example:
100% Un
88.9% Un
d4
d5
d3
77.7% Un
d6
66.6% Un
d2
d7
55.5% Un
d8
d1
44.4% Un
33.3% Un
d0 0
261
d9
Wiper position
22.2% Un
11.1% Un
0% Un / 0
50%
d0
d1
d2
d3
d4
d5
d6
d7
d8
d9
Improved repeatability
By combining the constant value zones with the detents, engineers
can align the same voltage values with each of the detent stops
when rotating the control both forward and backward.
This provides clear mechanical positions that are not only repeatable,
but perfectly aligned electrical outputs at each of the (detent) angles.
Pihers detents also prevent output values from changing due to
vibration or accidental rotor movements, furthering reliable control
consistency.
Main advantages
www.piher.net
100%
51
RECOMMENDED CONNECTIONS
VCC
Recommended
connection scheme
for Pihers position
sensors
(voltage divider)
AD
RL
RL 100 x R
Disclaimer
The product information in this catalogue is for reference purposes. Please consult for the most up to date and accurate design information.
Piher Sensors & Controls S.A., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Piher), disclaim
any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product described
herein.
Piher disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to
the maximum extent permitted by law. The product specifications do not expand or otherwise modify Pihers terms and conditions of sale, including
but not limited to the warranty expressed therein, which apply to these products.
No licence, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Piher.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated.
Customers using or selling Piher products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully
indemnify Piher for any damages arising or resulting from such use or sale. Please contact authorised Piher personnel to obtain written terms
and conditions regarding products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Information contained in and/or attached to this catalogue may be subject to export control regulations of the European Community, USA, or other countries. Each recipient of this document is
responsible to ensure that usage and/or transfer of any information contained in this document complies with all relevant export control regulations. If you are in any doubt about the export control
restrictions that apply to this information, please contact the sender immediately. For any Piher International Corp. Exports, Note: All products / technologies are EAR99 Classified commodities.
Exports from the United States are in accordance with the Export Administration Regulations. Diversion contrary to US law is prohibited.
co r
d in g t o E
LV
www.piher.net
v020915
Pb
Ac
Certification
N ES023592
0 /53/EC) / R
2/9
(2 00 5/E C
BUREAU VERITAS
00
HS
(2
ISO 14001