Академический Документы
Профессиональный Документы
Культура Документы
ARCHITECTS:
M/s Prakash Walavalkar & Associates
102, Ameya Tower,
1139 Pavwala Street, Grant Road
Mumbai 400 004
Tel: 28822143 / 23855343
Mobile: 9869015343
Email: pwassociates.in@gmail.com
pwassociates.studio@gmail.com
PART II FINANCIAL BID
Page 0
CONTENTS
INDEX
INSTRUCTION
BILL OF QUANTITIES
DRAWINGS
PAGE NO
2
3 18
19
Page 1
INSTRUCTIONS
1. The Bill of Quantities shall be read in conjunction with the Drawings, Conditioners of Contract
and Specifications, as these documents are jointly explanatory and descriptive of the works
included in the Contract.
2. General directions and descriptions of work and materials given elsewhere in the Contract
documents are not necessarily repeated in the Bill of Quantities. Reference is to be made to
the other documents for information.
3. The Contractor shall be deemed to have visited the site before preparing his Tender and to
have examined for himself the conditions under which the work will be priced and all other
factors affecting the execution of the work and the cost thereof.
4. The Quantities of work and material in the Bill of Quantities are not to be considered as
limiting or extending the scope of work to be done and materials to be supplied by the
Contractor. The quantities in the Bill of Quantities are an estimate of the amount work but
the work will be measured on complete and the contractor will be paid on the actual
measurement of work approved by the Architect.
5. Any special methods of measurements used are stated at the head of or in text of the Bills of
Quantities for the items affected. All other items are measured net in accordance with the
drawings and no allowance has been made for wastage. Unless otherwise specified
measurements shall be as per relevant Indian Standard.
6. A price or rate in figures is to be entered against the item in the Bill of Quantities, whether
quantities are stated or not. Item against which no price is entered will be considered as
covered by other prices or rates in the Bills.
7. The prices and rates interested are to be the full inclusive value of the works described under
the various items, including all costs and expenses which may be required for the completion
of the work described, together with all cost and obligations set forth or implied in the
conditions of Contract, Specifications and the Drawings.
8. Some finishing items may be quantity wise completely altered (either added or omitted) and
the same shall not affect any rates quotes.
9. Where prices have been entered against Lump sum items, payment for such affected items
shall be made in proportion to the extent of which works have been done at the time of billing
and the same is at discretion of the Architect.
10. Providing and Fixing shall mean that the Contractor has to provide such materials not being
procured and borne by the Bank, but which are required for the item and if no materials need
be provided by the Contractor, the rate shall be only for fixing of the component covered in
the item.
Page 2
BILL OF QUANTITIES
Sr.
No.
A
Description
Unit
Quantity
A1
Sq.Ft.
1750.00
A2
Sq.Ft.
50.00
A3
Sq.Ft.
560.00
A4
Sq.Ft.
100.00
A5
Nos
5.00
A6
Nos
5.00
Rate
Amount
Page 3
A7
Sq.Ft.
10.00
A8
Sq.Ft.
125.00
A9
6" THK BRICK WALL WITH PLASTER - FOR ELOBBY Constructing 4.5 thk. Brick wall in 1:5 cement
mortar. Brick used shall be of best quality kiln burnt,
having sharp edges & giving clear ringing sound when
struck against each other. Necessary RCC lintels of
depth 4 above door opening to be provided. A 4
R.C.C. Patli Beam shall run horizontally @every 3-0
c/c height of the wall. The walls should be extended up
to the ceiling height by leaving space for return air for
A/C ducting as directed by Bank / Architect. The walls
to be plastered thick C.M.1:4 on both sides. The
walls should be finished in proper workmanship and
with neat finish.
Sq.Ft.
285.00
A10
VITRIFIED TILES FLOORING FOR BRANCH600mm X 600mm Providing and fixing VITRIFIED
Tiles approved make, shade and pattern as shown in
the drg. / As approved by the bank / Architect. In
CM1:4 in proper line and level without spacers for
maintaining the grid lines. 3 of 7. Rate shall be
inclusive of providing and laying necessary PCC and
Cement mortar for a thickness of 3" and joint filling
compound of the same shade of the tiles
Sq.Ft.
1280.00
Page 4
A11
VITRIFIED TILES FLOORING FOR E-LOBBY 600mm X 600mm Providing and fixing VITRIFIED
Tiles approved make, shade and pattern as shown in
the drg. / As approved by the bank / Architect. In
CM1:4 in proper line and level without spacers for
maintaining the grid lines. 3 of 7. Rate shall be
inclusive of providing and laying necessary PCC and
Cement mortar for a thickness of 3" and joint filling
compound of the same shade of the tiles
Sq.Ft.
310.00
A12
Sq.Ft.
QRO
A13
Sq.Ft.
50.00
A14
R.Ft.
QRO
A15
Sq.Ft.
100.00
Page 5
A16
Cu.Ft.
650.00
Cu.Ft.
200.00
Cu.Ft.
350.00
Kgs
4000.00
Kgs
100.00
A18
A19
A20
Page 6
Sq. Ft.
325.00
Nos.
2.00
Sq. Ft.
300.00
Furnishing Works
B1
Page 7
Sq. Ft.
100.00
R. Ft.
12.00
Cash Counter:
Providing and fixing in position Cash Counter
wide comprising of the following :
2-9
Page 8
Page 9
R. Ft.
5.00
Page 10
B5
Sq. Ft.
75.00
Page 11
B6
Sq. Ft.
25.00
B7
Sq. Ft.
80.00
Sq. Ft.
300.00
Sq. Ft.
75.00
B8
B9
Page 12
Managers Table
R.Ft.
6.00
R.Ft.
5.00
Officers Table
Providing and fixing in position Officers Table of size
46"x 2'-9" as per drawing / Officers Table of size 5'-0
x 2-3 as per drawing
including Side Storage
(Credenza) by using 25mm thick plywood for top and
18 mm thick plywood for all other horizontal and
vertical members. Telescopic CPU Stand/ ready -made
Keyboard tray shall be provided of approved model
and make. Footrest made with T.W. member of size
4x 1 finished with French polish.
Page 13
Sq. Ft.
70.00
R. Ft.
5.00
Sq. Ft.
850.00
Sq. Ft.
510.00
B14
B15
Page 14
Sq. Ft.
100.00
Sq. Ft.
100.00
Sq. Ft.
25.00
Nos.
3.00
Sq. Ft.
25.00
Sq. Ft.
25.00
Sq. Ft.
400.00
B18
Soft Boards:
Providing & fixing soft board panelling directly on wall /
column [basic fabric cost Rs.150/-Mtr.]
P & F 12mm thk soft boards covered with approved
with fabric on 12 mm thick comm. plywood back as
directed. Work includes frame out of 1 x TW
moulding with melamine polish to match rest of the
dcor.
B19
B20
B21
B22
Page 15
KEY BOX
Nos.
1.00
Nos.
1.00
Nos.
2.00
Providing and fixing key box of size 1' 6"x1' 6"x 6" with
all sides and back with 18mm thick comm. Ply wood
and lockable glass shutters in 18mm ply , with 5 mm
glass. Necessary hooks to be provided inside the box.
All exposed areas and inside to be finished with 1 mm
thick laminate of approved shade. The edges of shutter
and box to be lipped with steam beach beeding
polished with melamine. Rate shall be inclusive of all
necessary approved fittings like hinges, locks, hooks
etc. and any necessary hardware items.
B28
B29
Page 16
Fabrication Works
C1
Sq. Ft.
130.00
C2
Sq. Ft.
200.00
C3
Sq. Ft.
100.00
C4
Sq. Ft.
80.00
D2
Sq. Ft.
1450.00
R. Ft.
140.00
D2
Page 17
Painting Works
E1
Sq. Ft.
2750.00
E2
Sq. Ft.
525.00
Municipal Formalities
L.S.
Contractor Name :
Address
Page 18
Page 19