Академический Документы
Профессиональный Документы
Культура Документы
Physical characteristics
All steel construction, steel primed/epoxy coated, fiberglass reinforced storage tanks,
fiberglass reinforced crew accommodations double as emergency life boats. ABS (or
equal) classed construction standards. Entire unit fabricated in sections, shipped via
regular cargo freighter (no oversize or heavy lift vessels needed for transport), pinned
connections, rapid assembly at site. May be trucked to inland water locations if
needed. Operational life of rig platform in excess of thirty years. Designed for
moderate climate operations.
Delivery Time
Due to prefabricated, mass produced design elements, the entire rig is fabricated
within six to nine months. Four entire units may be fabricated and delivered in one
year at the present fabrication plant. Additional fabrication capabilities available.
DESIGN OVERVIEW
lbs/sq ft
Tonnes/sq M
Main deck
425
Pipe rack
540
2.64
Upper decks
150
0.73
Accommodations
90
Heliport
House decks
2.08
0.44
40
0.20
90
0.44
Machinery spaces
270
1.32
Sack stores
500
2.44
Please specify
7. Limiting Factor
(a) for Field Tow 441 ft
(b) for Ocean Tow 380 ft
2. Design of Rig
Proprietary in house design
Design of RigTED- Technological Educational Development, Inc.
Please Specify
3. Operating Water Depth Capability
Minimum Operating Water Depth : 35 feet
Maximum Operating Water Depth: 330 feet
No weight age will be given for lower or higher
Water Depth Capability.
Operating Water Depth Capability:
Minimum Operating Water Depth : 50 feet
Maximum Operating Water Depth : 330 feet
Upgradable to 350 ft
4. Drilling Depth Capability
Rig(s) should be capable of drilling exploratory/
development, high angle wells up to a depth of
20,000 feet and for work over operations
including short drift side-track, long-drift sidetrack,
drain hole & multi-lateral hole drilling, reentry
in the well and well control.
1) Drilling Unit : Bidder confirms categorically that all
the offered equipment are compatible with the drilling
depth rating of the rig. Yes -- All equipment as stated or equal.
a) Depth rating of rig 20000 ft Basis racking capability
2) Hoisting equipment : a) Mast (Derrick) Mfgr. Derrick Services International
Size 30 X 30
Load capacity 1044000lbs(Metric Tonnes or Kilo Pounds)
Racking capacity 21879ft
Last inspection on
byb) Draw works :
Mfgr. National Model 1320UE-2000HP DC
Rated Power 2000 HP
c) Crown Block
Mfgr. National Model 750 FA capacity 583 t
d) Traveling Block
Mfgr. National Model capacity 500 T
e) Drilling hook :
3)- Drilling line
Diameter: in 1-3/8
Construction: 6 x19
Length (original): ft 4200
Drilling line reel: Yes
Drum cover: yes/no No
Drilling line drum power driven: yes/no Yes
Spare drilling line: yes/no No
Location (rig, shore, etc.) yes/no N/a
b) Swivel
National / 6500G-500
Please Specify
2)-Derrick Skidding system
Please Specify
3)-Preload requirement/Capacity: IADC
4)- Details of Cellar Deck: IADC
5)- Mooring: 40T winches
a)- Anchors
(i) No. 4 Size 2 x fwd, 2x aftType Baldt / steven MK3
Condition Good
b)- Anchor Wire Line
No. 4 Length2461 ft
Size 2 type Bleel Wires Condition Good
c)- Winch
Quantity: no 4
Make/model: Rauma Repola,
Finland,
Type
(electric/hydraulic/diesel):
Electric / MW 500 E
S
Total HP per winch: hp 20/40/80
Rated pull: st 50st, low speed, firs
layer
Control locations
(local/remote/both):
Local
RawWater
Systems
Quantity: no. 3 pumps in tower
Pump location (water
tower or leg):
Suction distance below
hull (max):
ft 88
Salt water service pump:
Quantity: no. 3
Make/Type: Pleuger / Q103-2
+V10-70
Capacity: M3/hr 350
@ pressure: psi 65.5
Horsepower: hp 100
Dedicated preload
pumps:
Sea salt water
service pumps
11. Accommodation
Air-conditioned accommodation for not less than
100 persons.
Accommodation:
1. Quarters compliments 108 men
2. Galley 1 no
Hospital 2 no beds / 1 dangerous drug
locker
4. Office accommodation 1 no + 2 meeting rooms
12. Pollution Control Equipment
Suitable Sewage Treatment Plant meeting
required standards for the treated affluent
discharge.
Pollution Control Equipment
Make__________________________
Certified functional by_____________
Cranes, Revolving
Quantity: no. 1
Specification (API, etc.): DNV
Make: National Crane, Grove
Type: BOS 50/900DH
Location (frwd/aft/port/stbd): Stbd
Boom length: ft 110
Hook reach below main deck
(block/whip):
ft/ft Block capacities and hoisting
speeds:
Load/radius/speed (minimum
radius):
st/ft/(ft
/sec)
50/28.5/1.5
Load/radius/speed (maximum
radius):
st/ft/(ft
/sec)
10/120/1.5
Whip capacity and hoist speed: st/ft/(ft
/sec)
10/134/6.01
Hook load indicator automatically:
corrected for boom angle: yes/no yes
Alarm (audible, visual, both): audiable
Automatic brake: yes/no yes
Safety latch on hooks: yes/no yes
Crown saver (limit switch): yes/no yes
Boom illumination: yes/no yes
Quantity: no. 1
Specification (API, etc.): DNV
Make: Liebher-werk Nenzing
ges, MBN
Type: BOS 50/900DH
Location (frwd/aft/port/stbd): Port
Boom length: ft 120
Hook reach below main deck
(block/whip):
ft/ft -
REQUIREMENT
ALL TUBULARS SHALL BE PROVIDED AS PER OUR
REQUIREMENT
500 metres
(All Drill pipes in Range-II, new/premium class,
preferably without hard banding on tool joints .
Tool joints having hard banding of non-abrasive,
non-tungsten carbide material applied
countersunk and flushed with tool joint i.e.
ARNCO 22 XT , Grant Smooth X etc. can also
be considered
(b) Spiral Drill Collars:
8 OD : 30 Joints (minimum)
6 / 6 D : 30 Joints (minimum)
4 OD : 18 Joints (minimum)
3 OD : 05 Joints (minimum)
(c) Heavy Weight Drill Pipe:
6-5/8 O.D. Spiral: 55 Joints (minimum)
(65-75 ppf)
5 OD: 30 Joints (minimum)
3OD: 15 Joints (minimum)
Confirms Yes
(b) Spiral Drill Collars:
Please specify
(c) Heavy Weight Drill Pipe:
Shall be provided as per your requirement
Inspection schedule on all Tubular, when last
inspected and by whom
Shall be provided
22 Drilling Jar: one Nos. of double acting
Hydromechanical Drilling Jars suitable for use in
Drilling 12 , 8 and 6 hole each. (min.
upstroke length 12 and down stroke length 7)
Drilling Jars
Shall be provided as per your requirement
23 Substitutes
All Substitutes matching to Contractors drill
string, fishing tools and Contractor supplied
equipment and for bits, as per the Casing Policy
to be used. Complete list of Substitutes to be
submitted along with Technical bid.
Cross over subs, Bit Sub and pup joints
(Detailed list to be submitted)
Please Specify
Confirm categorically to provide all Cross over subs
matching to Contractor drill string, fishing tools, and
contractor-supplied equipment and for bits as per casing
policy to be used. Yes
24 Handling Tools
All handling tools like Elevator, Spiders, Slips,
Tongs, Power Tongs, Pipe Spinners, Hydraulic
casing tong (5 to 13 5/8 size range), Safety
st 200
st 150
st 150
st 250
Quantity: no. 2
Make/type: Varco 4 1/2 SDXL
Size: in 2-7/8
Quantity: no. 1
Make/type: Varco 3-1/2 SDXL
casing
casing
casing
casing
OD,
OD,
OD,
OD,
quantity:
quantity:
quantity:
quantity:
in/no.
in/no.
in/no.
in/no.
13-3/8, Qty 12
9-5/8, Qty 9
7-5/8, Qty 7
7, Qty 10
150
Quantity: no. 2
Make/type: Hydromatik GmbH
ULM, Donau ATV 80
LV-RPFOO
Capacity (ea.): gpm 29.4
Output pressure: psi 2571
Dedicated unit: yes/no No, skidding /
helideck / power
25 Hydraulic Cat-head
Drillco Ezy-Torque or equivalent, complete with
motor etc.
Hydraulic Cat Head Unit :
Drilco EZY-Torq, catheads / model D /
tupe II
32,147 ft lbs Max Line Pull
26 Pile Hammer
For driving 30 & 26 Conductor.
Pile Hammer to drive 30" & 26" Conductor
As per ONGC Requirement
27 Blow-out Preventor
The Rig should be equipped with sour treated/
H2S trim BOP of the following sizes:(a) 21 x 2,000 PSI, consisting of One Annular unit and the bottom most
connection of said BOP should match the
Wellhead connection, i.e. 21 x 2,000 psi API
Flange.
(b) 13.5/8 x 10,000 psi Stack consisting of :(i) One 13.5/8 x 5,000 psi Annular BOP
(ii) One Single and one Double 13.5/8 x 10,000
psi Ram type preventer with shear rams.
(c) Rigs should have additional Cross-over
Spools so as to match 5,000 psi and 10,000psi
28 Fishing Tools
The Rig should be equipped with Fishing tools,
i.e. Overshots, Junk Subs, Reverse Circulating
Junk Baskets, Junk Mills, Magnets, Safety Joints,
Fishing Jars, Jar Intensifiers, etc. for Contractors
Tubulars for various hole sizes. Complete list of
fishing tools & accessories to be submitted along
with Technical bid.
-Ditch magnet be provided in the flow channel.
Fishing Tools
Details of Fishing Tools for Contractors Tubular for
various hole sizes: All fishing tools and Accessories would be provided
as per Our requirement
29 Multi-String Cutter
Multi-string Cutter should be provided for 30
(26), 20 (18.5/8), 13.3/8 and 9.5/8 Casing.
Multi-String Cutter
To cut 30"(26"), 20"(18-5/8"),13-3/8", 9-5/8" & 7" Casing.
Shall be provided as per ONGC requirement
30 Bit Breakers
Bit Breakers for 26, 23, 17, 12, 8, 6
and 4 1/8 Bits.
Bit Breakers
Bit Breakers for 26, 23, 17, 12, 8, 6 and 4 1/8
Bits.
31 Lubricants
All lubricants for the Contractors equipment and
Contractors hired equipment will be supplied by
port cranes
Make/type: VHF Radio
Explosion proof: Yes
/no
TBA
Part of rig telephone
system (H.6.1):
Yes
/no
TBA
Part of public address
system (H.6.2):
Yes
/no
TBA
Computer Network LAN
Make/type: Cat-5E
Fiber Optics: Yes
/no
Yes, when L >90 m
Outlet Locations: Central Control Room,
Drillers Cabin, Tool
Pushers Office, Tool
Pushers Stateroom,
Clients Office, Clients
Stateroom, OIM /
Barge Engineer Office /
Stateroom, Training
Room, Sick Bay, VIP
Office, VIP Stateroom,
Mechanic Office,
Storekeepers office
(port/stbd), Electrician
office.
EXTERNAL COMMUNICATIONS EQUIPMENT
SSB Transceiver
Location(s): Radio Room
Quantity: no. 1
Make/model: Single Side Band
Radio
Power: watts
Frequency ranges
(low/high):
mhz/
mhz
(Synthesized crystal):
Facsimile capable (see
also H.9.9):
Yes
/no
Telex capable (see
also H.9.10):
Yes
/no
E.P.I.R.Bs
Quantity: no. 54
Make/model:
Location(s): Quarters Roof
(Handrail)
Marine VHF Radio
Quantity: no. 1
Make/model:
Power: watt
Channels:
33 Coring Tools
1 set of 6 x 4 x 60 ft Core barrel along with
handling tools, stabilizers and all accessories.
Coring Tools
a. Weight.
b. Mud pressure.
Maximum torque: ft-lbs 0-15000 / 0-35000
40 Water-maker
Water-maker(s) 3 of Total capacity around 10,000. gallons per day .
No weight age in case of excess generation.
Water Maker
1.Make ---------- Capacity in Metric Tonnes per day ---2.Make ---------- Capacity in Metric Tonnes per day ---41 Cementing Unit
-Diesel / Electric driven Horizontal Twin Pump
Cementing Unit with RCM/PSM or equivalent
recalculating system complete with all
accessories including:Details of Cementing Unit