Академический Документы
Профессиональный Документы
Культура Документы
Air-cooled
Heat
Exchangers
Process Heat
Exchangers
French factory
Hamon DHondt has a large factory in Fresnes / Escaut
(France) with a covered area of 17.550 m2 on a total
surface of 115.000 m2.
The workshops are equipped with the most modern
machinery for proper manufacturing and control of the
complete air-cooled heat exchangers.
Forced draft
Allows easier maintenance of the fans. Fans deliver air at
ambient temperature with consequent higher efficiency.
Induced draft
The plenum chambers are mounted on top of the bundle
and protect the finned surface against wind, rain, snow
and partially hail. The location of the fans also ensures
an optimum air distribution, limits air recirculation and
allows lower level at maintenance walkway level.
Fans deliver hot air.
Recirculated / Winterization
This feature is recommended for special processes
(hydrate prevention..) and cold climates, where it is
advisable to provide warm air by recirculation to prevent
freezing. The recirculation may be achieved by means
of louvers, steam coils and variable fans.
Manufacturing process
An aluminium muff is shrunk onto
a bare tube, which has been care
fully degreased first
The assembly is passed through
the machine by means of a set of
rotating disks
The compression of the disks
around the aluminium muff results
in the extrusion of the aluminium
around the base tube, thus causing
the formation of the fins
The pre-stressing of the aluminium
muff means that the fins are held
perfectly around the base tube
Manufacturing process
A groove is cut in the bare tube
by metal lifting
The strip is embedded under
tension into the groove and
pressure is applied to the lifted
metal to fix the fin
This manufacturing process
ensures that the fin is fixed tightly
to the tube, providing optimum
heat transfer
Manufacturing process
The fins are composed of an
aluminium or copper strip tightly
wound around the tube
The bases of the fins form a
perfect seal, thus offering total
protection to the underlying tube
The tube and base of the fins are
simultaneously knurled together,
thus guaranteeing a perfect fit
between the fin and the tube to
provide optimum heat exchange
Advantages of the KLM fin system
Tube protected against corrosion
Resistant to vibrations
May be used at temperature up to
320C (608F)
Unique combination of high
thermal performance and stress
resistance with atmospheric
corrosion protection
K LM can favorably replace any
type of finned tubes
Advantages of G fins
Provides a perfect fit between the
fin and the tube
May be used at temperatures up
to 400C (752F)
Retubing
Hamon DHondt performs the retubing of tube bundles; this is directly
made in our workshops.
Hamon DHondt also manufactures
fully interchangeable finned tubes.
Services
For all products Hamon DHondt offers a full scope of
services including engineering, procurement, supply of
complete units, assistance at commissioning and start-up.
Hamon DHondt also ensures full after sales services:
Supply of spare parts (finned tubes, plugs, gaskets,
bearings, fan blades, pulleys, motors...)
Trouble shooting or revamping studies
Performance optimization
Re-tubing of bundles in our workshop
Hamon DHondt provides all spare parts for their products,
either from the ready stock (bearings, fans, motors, plugs,
gaskets, ...) or manufactured on demand (header, finned
tubes, bundles) in compliance with the original parts
(all parts guaranteed except wear parts).
9
Spare parts
Other activities
10
Studded tubes
11
HAMON DHONDT
1524, rue de la Paix
59970 Fresnes sur Escaut
France
Tel: +33 3 27 28 44 28
Fax: +33 3 27 28 44 00
info.hdh@hamon.com
HAMON DHONDT MIDDLE EAST
Tareeg 128, Jubail Support Industrial Area
P.O. Box 1080 Jubail 31951
Kingdom of Saudi Arabia
Tel: +966 3 340 75 11
info.hdhme@hamon.com
HAMON MIDDLE EAST
Bahrain Financial Harbour
PO Box 20705. Manama
Kingdom of Bahrain
Tel: +973 1750 2730
Fax: +973 1750 3029
info@hme.com
HAMON BHI Co., LTD.
Head Office: 165-2, Jangji-ri, Gunbuk-myeon,
Haman-gun, Gyeongnam, South Korea
Seoul Office: 7FI., Seongwan Bldg., 546, Dokok-dong,
Kangnam-gu, Seoul, South Korea
Tel: +82 2 569 4292
Fax: +82 2 569 7251
Info.hamonbhi@hamon.com
201112
www.hamon.com