Академический Документы
Профессиональный Документы
Культура Документы
1. Boot the server using HP SmartStart CD (this might take some time!)
2. Select language as English (US), keyboard layout as US English and click Next button
13. Select the Hard Drives from the list and click OK. The Array will be created.
16. Select the RAID level (Fault Tolerance), also ensure that Array Accelerator is Enabled.
17. Click on Save button to create the logical drive.
Note: As we have only one HDD, the only available RAID level is RAID 0, if we had 2 HDD, then we
will get the RAID 1 option as well. If 3 HDDs are installed, then you will find RAID 5 listed in this
window.
2. Select language as English (US), keyboard layout as US English and click Next button
14.
Now you will bet at Product Set Up Information page.
15. Enter Computer Name, Administrator Password and rest of the information. Click Next
Note: In Some cases, you may be prompted to enter Windows Product key as well. If prompted,
please fill the Windows Product key at the same page to continue the installation.
22. Now you will bet at Proliant Support Pack Installation Configuration page.
23. Select Express option and click Next
26. Now SmartStart CD will partition the drive and will copy necessary drivers from the CD.
27. When Prompted Insert the Windows OS CD or use iLO Virtual media to map the OS CD.
29. Wait till SmartStart CD finishes copying of Windows OS files to the HDD.
32. Accept the Microsoft License Terms and click Next button
34. Great, Windows is successfully installed on your Server, now you are ready to roar!
Here in this post, we have installed Windows 2008 R2 Enterprise 64 bit on a DL360 G7 Server using
SmartStart CD 8.6 version. If you are installing other version of Windows, you will also need to enter
Windows Product key at Step number 15.