Академический Документы
Профессиональный Документы
Культура Документы
http://192.168.110.39/wiki/index.php?title=ManD...
ManDect
From atlcwiki
Jump to: navigation, search
Contents
1 DECT
1.1 DECT - Commands
1.1.1 DECT Node - Conguration
1.1.2 Show Work
1.1.3 Show Status
1.1.4 DECT Node - Operating Commands
1.1.4.1 DECT Handsets Registration
1.1.4.2 Example of Handset Registration with Register Command
1.1.4.3 Example of Handset Registration with DECT Button
1.1.4.4 Call-test
1.1.4.5 De-register
1.1.4.6 Example of how to delete the handsets registration
1.1.4.7 Paging Functionality - Command
1.1.4.8 Example of how paging the handsets associated to the base
1.2 Intercom - Making Internal Calls
1.2.1 Calling other handsets
1.2.2 Ending a call
1.3 Making and Receiving External Calls
1.3.1 Example of DECT Conguration
1.4 List of compatible DECT handsets or cordless telephones
DECT
Some CPE models like BG8542 and BG7420 have integrated in the gateway a DECT /CAT-iqTM base station that allows to work with
any certied CAT-iqTM handset.
DECT stands for Digital Enhanced Cordless Technology.
A DECT system consists of a portable part (DECT handset) and a xed part (DECT base).
There are 2 possible mechanisms to connect a portable part (DECT handset) to the xed part (DECT base)
1. GAP
2. CAT-iqTM
GAP stands for Generic Access Prole and has been dened to allow third party handsets to connect to a DECT base with limited
functionality. No standardized power saving mechanisms are supported by this prole.
CAT-iqTM stands for Cordless Advanced Technology, Internet and Quality and has been dened to ensure interoperability
between handsets and bases from dierent manufacturers. The level of interoperability is dened in dedicated proles (1.0, 2.0, 2.1,
3.0, 4.0). A standardized no emission mode is included in the 2.0 prole, as an optional feature.
DECT - Commands
In the root node, there is the dect subnode, where you can congure the following parameters with set command
ATOSNT\dect>>set ?
Available nodes:
base0
Set command parameters:
level of log [loglevel]
Current value: 1
Notice that there is an available node, named base0. Actually the dect node automatically generates the base0 node associated to it.
Table 1: set
Syntax
1 di 11
Description
06/05/2015 17:41
ManDect - atlcwiki
http://192.168.110.39/wiki/index.php?title=ManD...
Sets the detail level used by ATOSNT to record the DECT events.
Default: 1
loglevel [0-5]
Description
keyword
Name of the DECT base to add
With tree command, you can see all the DECT bases.
ATOSNT\dect>>tree
dect
base0
base1
Description
keyword
Name of the DECT base to delete
Table 4: set
Syntax
on|o
loglevel [0-5]
Current
Current
Current
Current
Current
Current
Current
value:
value:
value:
value:
value:
value:
value:
on
1
1234
off
off
off
Description
Enables/disables the DECT base functionality
Sets the level of log.
Default: 1
description [max 100 char] Sets a brief description of the DECT base
Sets a pin code for the handsets registration. The "pin code" is a password
(max 8 characters, in the above example is "1234") to be used by the
pin-code [max 8 char]
handsets during the registration to the base station. Notice that many
2 di 11
06/05/2015 17:41
ManDect - atlcwiki
http://192.168.110.39/wiki/index.php?title=ManD...
NEMO-Support [on|o]
encryption-enable [on|o]
Set on means that the data transmission between the base and the handset is
encrypted
Default: o
Activates/deactivates the RF transceiver of the DECT base
RF-enable [on|o]
Default: o
Note: Notice that by default the "RF-enable" parameter is o and you must set on as well as "enable [on|o]" parameter. After setting
both parameters, the DECT base works properly and the DECT LED on the front panel is turn on.
Show Work
You need to assign a pin code to each DECT base station you will use. In this case, only one base station has been used, base0 and
the pin code assigned is 1234. See bellow.
ATOSNT\dect\base0>>show work
Show of ATOSNT dect base0
Enable
: on
Level of log
: 1
Description
:
Base type
: on-board
Pin Code
: 1234
NEMO Support
: on
Encryption enable : off
RF enable
: on
Command executed
Show Status
ATOSNT\dect\base0>>show status
base0 Info
Firmware Info
Max registrable handsets: 6
Registered handsets: none
Enable
Delete
Paging
Make a
3 di 11
06/05/2015 17:41
ManDect - atlcwiki
http://192.168.110.39/wiki/index.php?title=ManD...
Now you should type "register" , see below for more details.
ATOSNT\dect\base0>>register?
register help :
register usage:
no parameters
Enable registration
Notice that the base station is now waiting for the request of the handset registration for 1 minute period.
After this period, the two units, the base and the handset can "see" each other and the handset will be registered to the main base.
For this example we have taken two cordless terminals from the market, one is branded Siemens (handset1), the other one is Alcatel
(handset2).
With show Status command, you will see this info:
ATOSNT\dect\base0>>show status
base0 Info
Firmware Info
Max registrable handsets: 6
Registered handsets: handset1,handset2
Handset1 codecs: G.722, G.726
Handset2 codecs: G.726
Attached handsets: handset1,handset2
Notice that the terminal registration order nominates the terminal number, so the rst terminal registered is named "handset1" and
so on.
Example of Handset Registration with DECT Button
Before starting the handsets registration, check that "enable" and "RF-enable" parameters are set on and the DECT LED at the CPE
front panel is xed on (the base station is working properly).
This is the starting point. Note that 6 is the maximum number of handsets to be registered the the base0 station.
ATOSNT\dect\base0>>show work
Show of ATOSNT dect base0
Enable
: on
Level of log
: 1
Description
:
Base type
: on-board
Pin Code
: 1234
NEMO Support
: on
Encryption enable : off
RF enable
: on
Command executed
ATOSNT\dect\base0>>show status
base0 Info
Firmware Info
4 di 11
06/05/2015 17:41
ManDect - atlcwiki
http://192.168.110.39/wiki/index.php?title=ManD...
At the CPE backpanel there are two buttons, as you can see in the below picture.
To register the handset using DECT button, you should perform these steps:
1.
2.
3.
4.
At this point, press DECT button for more than 5''. The DECT LED starts ashing for 60 seconds, actually the LED is on for 500 ms
and then is o for another 500 ms. During this period, the base station is listening the terminals requests for registration.
At last with show status you can see the two handsets registration.
ATOSNT\dect\base0>>show status
base0 Info
Firmware Info
Max registrable handsets: 6
Registered handsets: handset1,handset2
Handset1 codecs: G.722, G.726
Handset2 codecs: G.726
Attached handsets: handset1,handset2
Command executed
Call-test
Call-test command allows to make a call test to a handset at a time. This useful tool allows the administrator network to rapidly
identify where the handset is and to decide in which area of oice or home to place it.
ATOSNT\dect\base0>>call-test ?
call-test help :
call-test usage:
<choice handset>
De-register
De-register command allows to delete the handsets registration.
The administrator has multiple choices to delete the handset registration, he can delete the registration of all handsets or one
specic handset at a time (handset1 or handset2).
See below how the command works.
ATOSNT\dect\base0>>de-register ?
de-register
de-register
5 di 11
help :
usage:
Delete registration
06/05/2015 17:41
ManDect - atlcwiki
http://192.168.110.39/wiki/index.php?title=ManD...
<choice handset>
de-register command parameters:
handset
[all-handset|handset1|handset2]
In this example the de-registration of all handsets to the DECT base is performed
ATOSNT\dect\base0>>de-register all-handset
De-registering all-handset
Command executed
At last, you can verify the result with show status command
ATOSNT\dect\base0>>show status
base0 Info
Firmware Info
Max registrable handsets: 6
Registered handsets: none
6 di 11
06/05/2015 17:41
ManDect - atlcwiki
http://192.168.110.39/wiki/index.php?title=ManD...
Enter number 2 that corrisponds to the receiving handset. Then handset2 is called.
Ending a call
Application Scenario
At the local site there is a CPE BG7420 with a DECT cordless telephone connected and at the remote site, there is another CPE
BG1220 with an Analog telephone (POTS) connected to it.
BG7420 and BG1220 are business VoIP gateways with router functionalities.
Suppose that a user at the local site, wants to make and receive calls from the Analog Telefone connected to BG1220.
DECT cordless telephone is registered to the base station DECT base0 with username "9202".
DECT base0 is the base station integrated into the BG7420
The number asigned to the remote Analog Telefone is "9201".
The example shows how to congure BG7420 to make and receive external calls
using a DECT handset
ATOSNT>>show conf
set wlan0 RF-mode b-g-n
set wlan0 ssid ATOS-NT:wlan0
set wlan0 nick ATOS-NT:wlan0-NICK
set dect base0 pin-code 0000
set dect base0 RF-enable on
7 di 11
06/05/2015 17:41
ManDect - atlcwiki
http://192.168.110.39/wiki/index.php?title=ManD...
9202
dnsmgr Username
192.168.31.200:5060 N
9202
Refresh
State
Reg.Time
25
124
March
Registered 2014
21:04:06
1 SIP registrations.
Status of dect-base0.1
Conguration status : enable, used into InBoundList, OutBoundList
Status : OUTGOING ACTIVE(9201)
8 di 11
06/05/2015 17:41
ManDect - atlcwiki
http://192.168.110.39/wiki/index.php?title=ManD...
Dir
to
RemoteUser
9201
Codec
G.729a
Command executed
Calls
Calls
Calls
Calls
Calls
:
Answer :
Busy :
No Answer :
Failed :
Incoming
2
1
0
0
1
Outgoing
3
2
0
0
1
Realtime statistics
VOICE pkts from Line : 12306
VOICE octects from Line : 246120
VOICE pkts to Line : 12310
VOICE octects to Line : 246200
MOS R value : 93.00
MOS calculation time interval : 4
MOS advantage factor : 1
MOS LQE measured : 4.1
9 di 11
06/05/2015 17:41
ManDect - atlcwiki
http://192.168.110.39/wiki/index.php?title=ManD...
Calls
Calls
Calls
Calls
Calls
Incoming
2
1
0
0
1
:
Answer :
Busy :
No Answer :
Failed :
Outgoing
3
2
0
0
1
Connections:
Duration RECV: Pack Octects
Lost
% Jitt SEND: Pack Octects
Lost
% Jitt UserTerm Dir RemoteUser
00:04:10 0000012345 0000246900 00000 00% 0000 0000012350 0000247000 00000 00% 0002 dect-0.1 to 9201
Statistics of Call-mng
ID
75424.0
75473.2
75892.6
75891.4
SOURCE
dect-base0.1
sip-9202
sip-9202
dect-base0.1
ID
75424.0
75473.2
1
9201
9202
1
RECV: Pack
0000000350
0000000159
DESTINATION
sip-9202
dect-base0.1
dect-base0.1
sip-9202
Octects
0000007000
0000003180
9201
9202
9202
9202
Lost
00000
00000
START
2014-03-25
2014-03-25
2014-03-25
2014-03-25
20:57:04
20:57:53
21:04:52
21:04:51
%
Jitt
00% 0000
00% 0000
END
2014-03-25
2014-03-25
2014-03-25
2014-03-25
SEND: Pack
0000000354
0000000164
20:57:14
20:58:06
21:04:52
21:04:56
Octects
0000007080
0000003280
TOTAL
10
13
0
5
RESULT ACTIVE
ACTIVE 7
ACTIVE 3
NO-ANS
FAILED
Lost
00000
00000
%
Jitt
00% 0000
00% 0000
Command executed
Martini
My talk
My preferences
My watchlist
My contributions
Log out
10 di 11
06/05/2015 17:41
ManDect - atlcwiki
http://192.168.110.39/wiki/index.php?title=ManD...
Namespaces
Page
Discussion
Variants
Views
Read
Edit
View history
Actions
Move
Watch
Search
Go
Search
Navigation
Main page
Community portal
Current events
Recent changes
Random page
Help
ATOSNT User Guide
Toolbox
Create a book
Download as PDF
This page was last modied on 3 April 2014, at 16:19.
This page has been accessed 222 times.
Privacy policy
About atlcwiki
Disclaimers
11 di 11
06/05/2015 17:41