Академический Документы
Профессиональный Документы
Культура Документы
1(4)M4, RELEASE
SOFTWARE (fc1)
Parte 2.
Parte 3.
Parte 9.
Parte 10. program load complete, entry point: 0x80803000, size:
0x1b340
Parte 11. program load complete, entry point: 0x80803000, size:
0x1b340
Parte 12.
Parte 13. IOS Image Load Test
Parte 14. ___________________
Parte 15. Digitally Signed Release Software
Parte 16. program load complete, entry point: 0x81000000, size:
0x2bb1c58
Parte 17. Self decompressing the image :
Parte 39.
Parte 40. Cisco IOS Software, C1900 Software (C1900UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE
(fc2)
Parte 41. Technical Support: http://www.cisco.com/techsupport
Parte 42. Copyright (c) 1986-2012 by Cisco Systems, Inc.
Parte 43. Compiled Thurs 5-Jan-12 15:41 by pt_team
Parte 44. Image text-base: 0x2100F918, data-base: 0x24729040
Parte 45.
Parte 46. This product contains cryptographic features and is
subject to United
Parte 47. States and local country laws governing import, export,
transfer and
Parte 48. use. Delivery of Cisco cryptographic products does not
imply
Parte 49. third-party authority to import, export, distribute or use
encryption.
Parte 50. Importers, exporters, distributors and users are
responsible for
Parte 51. compliance with U.S. and local country laws. By using
this product you
Parte 52. agree to comply with applicable laws and regulations. If
you are unable
Parte 53. to comply with U.S. and local laws, return this product
immediately.
Parte 54.
Parte 55. A summary of U.S. laws governing Cisco cryptographic
products may be found at:
Parte 56. http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
Parte 57.
Parte 58. If you require further assistance please contact us by
sending email to
Parte 59. export@cisco.com.
Parte 60.
Parte 61. Cisco CISCO1941/K9 (revision 1.0) with
491520K/32768K bytes of memory.
Parte 62. Processor board ID FTX152400KS
Parte 63. 2 Gigabit Ethernet interfaces
Parte 64. DRAM configuration is 64 bits wide with parity
disabled.
Parte 65. 255K bytes of non-volatile configuration memory.
Parte 66. 249856K bytes of ATA System CompactFlash 0
(Read/Write)
Parte 67.
Parte 68.
Parte 69. --- System Configuration Dialog --Parte 70.
Parte 71. Continue with configuration dialog? [yes/no]:
Parte 112. ^
Parte 113. % Invalid input detected at '^' marker.
Parte 114. R1(config-line)#password cisco
Parte 115. R1(config-line)#login
Parte 116. R1(config-line)#end
Parte 117. R1#
Parte 118. %SYS-5-CONFIG_I: Configured from console by
console
Parte 119.
Parte 120. R1#
Parte 121. R1#configure terminal
Parte 122. Enter configuration commands, one per line. End with
CNTL/Z.
Parte 123. R1(config)#ip domain-name cisco.com
Parte 124. R1(config)#crypto key generate rsa
Parte 125. The name for the keys will be: R1.cisco.com
Parte 126. Choose the size of the key modulus in the range of 360
to 2048 for your
Parte 127. General Purpose Keys. Choosing a key modulus
greater than 512 may take
Parte 128. a few minutes.
Parte 129.
Parte 130. How many bits in the modulus [512]:
Parte 131. % Generating 512 bit RSA keys, keys will be nonexportable...[OK]
Parte 132.
Parte 133. R1(config)#username admin secret cisco
Parte 134. *mar. 1 0:19:8.135: RSA key size needs to be at least
768 bits for ssh version 2
Parte 135. *mar. 1 0:19:8.135: %SSH-5-ENABLED: SSH 1.5 has
been enabled
Parte 136. R1(config)#service password-encryption
Parte 137. R1(config)#^Z
Parte 138. R1#
Parte 139. %SYS-5-CONFIG_I: Configured from console by
console
Parte 140.
Parte 141. R1#run st
Parte 142. ^
Parte 143. % Invalid input detected at '^' marker.
Parte 144. R1#configure terminal
Parte 145. Enter configuration commands, one per line. End with
CNTL/Z.
Parte 146. R1(config)#run st
Parte 147. ^
Parte 148. % Invalid input detected at '^' marker.
Loading "flash:/c2950-i6q4l2-mz.121-22.EA4.bin"...
#########################################################################
# [OK]
Restricted Rights Legend
Cisco WS-C2950T-24 (RC32300) processor (revision C0) with 21039K bytes of memory.
Processor board ID FHK0610Z0WC
Running Standard Image
Switch>enable
Switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#hostname S1
S1(config)#ip domain-lookup
S1(config)#enable secret class
S1(config)#line vty 0 15
S1(config-line)#password cisco
S1(config-line)#login
S1(config-line)#line console 0
S1(config-line)#password cisco
S1(config-line)#login
S1(config-line)#end
S1#
%SYS-5-CONFIG_I: Configured from console by console
S1#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
S1(config)#ip default-gateway 172.16.99.1
S1(config)#service password-encryption
S1(config)#^Z
S1#
%SYS-5-CONFIG_I: Configured from console by console
S1#copy run st
Destination filename [startup-config]? confugre terminal
%Error copying nvram:confugre terminal (Invalid argument)
S1#
S1#copy run st
Destination filename [startup-config]?
Building configuration...
[OK]
S1#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
S1(config)#int vlan 99
S1(config-if)#ip address 172.16.99.11 255.255.255.0
S1(config-if)#no shutdown
S1(config-if)#end
S1#
%SYS-5-CONFIG_I: Configured from console by console
configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
S1(config)#vlan 99
S1(config-vlan)#
%LINK-5-CHANGED: Interface Vlan99, changed state to up
S1(config-vlan)#name Management
S1(config-vlan)#exit
S1(config)#show vlan
^
% Invalid input detected at '^' marker.
S1(config)#exit
S1#
%SYS-5-CONFIG_I: Configured from console by console
S1#show vlan
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ -----1 enet 100001 1500 - - - - - 0 0
99 enet 100099 1500 - - - - - 0 0
1002 fddi 101002 1500 - - - - - 0 0
1003 tr 101003 1500 - - - - - 0 0
--More