Академический Документы
Профессиональный Документы
Культура Документы
SM
What is
LEED?
Leadership in Energy & Environmental Design
LEED-EB [2]
LEED-CI [3]
LEED-K12 [4]
LEED-CS [5]
26
24
28
10
11
11
10
35
37
33
37
14
14
13
13
15
26
14
35
10
15
21
17
19
12
Various LEED certification levels are recognized based off total points.
Level
Points
Certified
LEED-EB[2]
LEED-CI[3]
LEED-K12 [4]
LEED-CS [5]
40-49
40-49
40-49
40-49
40-49
Silver
50-59
50-59
50-59
50-59
50-59
Gold
60-79
60-79
60-79
60-79
60-79
80+
80+
80+
Platinum
[1]
LEED-NC[1]
New construction,
80+
[2]
Existing buildings,
[3]
Commercial interiors,
80+
[4]
K-12 Schools,
[5]
The focus of these credits are to reduce environmental impact associated with excessive energy
usage. As lighting is often the largest contributor to a building energy usage, lighting control becomes
critical to assure lighting loads are effectively managed. Lighting control from Schneider Electric can be
used to both reduce energy consumption and peak electrical demand.
Note: For commercial interiors an additional 1 to 3 points may be earned for using daylighting
controls and occupancy sensors
Enhanced commissioning (NC: 2 points, EB: 6 points, CI: 5 points, K-12: 2 points, CS: 2 points)
The focus of these credits are to assure that the commissioning process begins early in the design
process and continues after system performance verification is completed. Schneider Electric provides
a wide variety of services from initial design consultation, project management, start-up, and on-going
system monitoring and support to assure your lighting control system is delivering maximum energy
savings and performance.
Note: For existing buildings, 1 point may be earned for implementing a computer based Building
Management System to control HVAC and lighting.
System level metering (NC: 3 points, EB: 2 points, CI: 5 points, K-12: 2 points, CS: 3 points)
point
These credits encourage ongoing optimization of building energy performance over time.
Schneider Electrics network-based lighting control systems can seamlessly integrate lighting control
and electrical metering functions of a building. These systems share the same communications
infrastructure and are fully able to track metered data by lighting zone, space and building.
CS: 0 point)
Credits for occupant lighting controllability can be earned, utilizing ambient task lighting that can
be altered based on occupant preferences. Lighting control from Schneider Electric offers a host of
occupant controllability from individual offices, large open spaces, even entire buildings. Our C-Bus
keypads and touch screens blend aesthetically pleasing faceplates with powerful capabilities to
provide convenient occupant comfort. And our advanced web-based lighting controls allow advanced
control capabilities from the convenience of a standard web browser.
Daylight and views (NC: 1-2 points, EB: 1 point, CI: 1-3 points, K-12: 1-4 points, CS: 1-2 points)
These credits are allowed by providing a connection between indoor spaces and the outdoor
environment through the introduction of daylight into regularly occupied areas. Lighting control
solutions from Schneider Electric can aid your design by allowing for controllable window treatments
to be controlled in conjunction with daylight harvesting and integration of time based scheduling.
System simplicity
With our unique distributed system, wiring is both easy and inexpensive. Our Ethernet-based control
systems utilize the buildings existing LAN, providing immediate savings opportunities. Each system is
fully scalable regardless of the size of the application.
Sophisticated styling
Implementing a lighting control solution should not mean you have to sacrifice the appearance of
your building. Our distinctly sophisticated look will complement any dcor. Clean lines. Sleek glass.
Brushed aluminum. Going green never looked so good.
Lighting is one of the largest culprits of energy waste in buildings. And it takes more than just
energy-efficient lights to significantly reduce your lighting costs. Schneider Electric Lighting Controls
reduce energy costs by as much as 30%, by automatically turning off lighting when it is not in use.
Its also easy to retrofit into existing buildings; and with payback periods often less than two years,
achieve a high return on your investment with Schneider Electric Lighting Controls.
tk