Академический Документы
Профессиональный Документы
Культура Документы
HOME
\/
Saturday, 25 January 2014
Materials Required
Assembly Instructions
Circuit diagram
1. First take ferrite core (doughnut shaped) and wind it with 256 turns of 30 gauge magnet wire and stop
winding when there is a gap of 2mm (c). Then solder both the ends with a thicker insulated wire (red
colored).
(a)
(b)
(c)
2.Wind 10 turns of a plastic insulated wire 18 gauge on top of the first winding.
3.Wind 5 turns of a plastic insulated wire 18 gauge on top of the second winding.
4.Now connect the Blue wire's one end with the resistor and another end with the Base - B of the
transistor.
5.Connect Black wire with the Collector - C of the Transistor (and the other end of it with the switch if you
want)
6.Next Connect the negative point of the battery with the transistor's Emitter - E and the positive with the
switch.
8.Finally Connect the gutted CFL's both the end with the red wire(which has 256 turns).
Test it Whether you have done all the things correctly and light the CFL with 1.5v Batteries !!!
You can close it in a box or a can, It depends on you.
Here is a video :
TRUEPROJECTS.BLOGSPOT.COM
Candle Heater
Materials Required
Assembly Instructions
I think that the easiest way for you to learn how to put all of these materials together is
to follow these images.
How it Works
The basic purpose of this heater is to capture the heat given from a candle
ember and to concentrate it into a steel and ceramic radiator assembly. After
some time, the ceramic surface will act as a thermal mass and begin to radiate
the captured thermal energy into your room or office.
Heat rising from a burning candle (or electric lamp) is first trapped in the Steel
Inner Core and surrounding Ceramic (Terracotta) Inner Module.
The Inner Cores profit very hot and radiate heat to the Ceramic Middle Core.
This entire inner region gets VERY VERY HOT! Heat synergistically builds up
and 'boils out' of the Terracotta Inner Core into the Ceramic Middle Core. The
Middle Core heats up and begins to Radiate Heat. Heated air 'boils out' into the
Terracotta Outer Core.
The Large Surface Area of the Outer Core begins receiving Heat. The inner wall
surfaces become very HOT! Heat travels through the wall to the Outer Surface.
The Outer Surface gets VERY WARM to HOT and gently begins to Radiate
Heat into your house or office.
TRUEPROJECTS.BLOGSPOT.COM
Posted by Mohammad Raza at 10:57 No comments:
Email ThisBlogThis!Share to TwitterShare to Facebook
Home
:)
Change your way of living ! Stop being fooled ! ENJOY brightness !
FOLLOWERS
ABOUT ME
MOHAMMAD RAZA
I want to support, inspire and assist people. I just wish to see a better world and I am much eager
to contribute in the betterment of humanity. I may not be much experienced but I'm sure enough
that I'm perfect to disclose the info I perceive !
VIEW MY COMPLETE PROFILE
BLOG ARCHIVE
2014 (2)
January (2)
Candle Heater
Copyright 2014 Truth and Only Truth. Designed, Customized and Blogged by Mohammad Raza