Вы находитесь на странице: 1из 15

CHAPTER 1

INTRODUCTION
The internal combustion engines have already become an indispensable and integral
part of our present day life style, particularly in the transportation and agricultural sectors which
collectively form not only one of the main consumers of fossil fuels but also one of the major
contributors to environmental pollution. Thus, automotive, truck and non-road engines/vehicles
constitute an important field, where the use of alternative fuels emerges as a very promising, longterm, alternative solution in order to achieve the desired diversification from petroleum products
.The world is presently facing with the twin crises of fossil fuel depletion and environmental
degradation. The increasing industrialization and motorization of the world has led to a steep rise for
the demand of petroleum-based fuels. Petroleum-based fuels are obtained from limited reserves.
These finite reserves are highly concentrated in certain regions of the world. Therefore, those
countries not having these resources are facing energy/foreign exchange crisis, mainly due to the
import of crude petroleum. Also the world reserves of primary energy and raw materials are
obviously limited. According to an estimate the reserves will last for 218 years for coal, 41 years for
oil, and 63 years for natural gas , Hence the prices of crude oil keep rising andfluctuating on a daily
basis. So it is necessary to look for alternative fuels which can be produced from resources available
locally within the country and renewable, such as alcohol, biodiesel, vegetable oils etc. which
promise a very good relation with sustainable development, energy conservation, efficiency and
environmental preservation. The fuels of bio-origin can provide a feasible solution to this worldwide
petroleum crisis. Various bio fuel energy resources explored include biomass, biogas, primary
alcohols, vegetable oils, biodiesel etc.

The name bio-diesel was introduced in the United States during 1992 by the National
Soy Diesel Development Board (presently National Bio-diesel Board) which has pioneered the
commercialization of bio diesel in the US. Bio-fuels are fuels produced by a number of chemical /
biological processes from biological materials like plants, agricultural wastes etc, Bio fuel is a source
of renewable energy. Bio diesel can be used as a pure fuel or blended with petroleum diesel
depending on the economics and emissions without any engine modifications.

DEPT OF MECHANICAL ENGINEERING

Page 1

www.pediain.com

There are many tree species which bear seeds which is rich in oil and having properties
of an excellent fuel and which can be processed as a diesel substitute. One of the most promising fuel
alternatives is the vegetable oils and their derivatives. Plenty of scientific articles and research
activities from around the world were printed and recorded. Oils from coconut, soy bean, sunflower,
safflower, peanut, linseed and palm were used depending on what country they grow abundantly. It
has been reported that in diesel engines vegetable oils can be used as fuel, straight as well as in
blends with the diesel. It is evident that there are various problems associated with vegetable oils
being used as fuel in compression ignition engines, mainly caused by their high viscosity. The high
viscosity is due to the molecular mass and chemical structure of vegetable oils, which in turn leads
the problems in pumping, combustion and atomization in the injector system of diesel engine. Due to
the high viscosity, vegetable oils normally introduce the development of gumming, the formation of
injector deposits, ring sticking as well as incompatibility with conventional lubricating oils in longterm operations.
The use of edible oil for production of bio-fuel will create scarcity in food production.
So it is recommended to use non-edible oils in bio-fuel production. Of these some important varieties
are Jatropha, Neem, Mahua etc. And the performance of Jatropha and other oils as blends with
diesel as well their esters, have been well established and documented as Internal Combustion (IC)
Engine fuels. This paper is based on a new variety of bio-fuel extracted from Cashew Nut Shell
Liquid (CSNL) called Cardanol.

1.1

LITERATURE SURVEY
Mallikappa D.N Rana pratap Reddy and Ch.S.N.Murthy (2011) found the effects cardanol oil

and its diesel blends . For 20% blends emission levels were nominal .and suggested that there is a
potential for the use upto 20% and hence 20% saving in fuel cost
Experimental investigation of CNSL as alternative fuel, was undertaken by V. Palvannan and K.
Balagurunathan (2012).And the first trial run with a maximum of 20% CNSL-diesel blend, was successfully
conducted on single cylinder CI engine. Engine power output and smoke emissions were found to be
satisfactory.Then it was decided to proceed with further testing using CNSL as alternative fuel.

A study by A.S . Ramdhas, S.jayaraj and C . Muraleedharan demonstrate the production and
characterization Of vegetable oil as well as the experimental work carried out in various countries
in this field. In addition, the scope and challenges being faced in this area of research are
clearly described.

CHAPTER 2

DEPT OF MECHANICAL ENGINEERING

Page 2

www.pediain.com

CASHEW NUT SHELL LIQUID(CNSL)


2.1 Introduction to cashew tree
Cashew is important as a tree to counterbalance deforestation. These trees are wild and
therefore once established will look after themselves. Cashew is an immigrant tree from Eastern
Brazil and now among the top three commercial crops of India [2]. The Cashew Nut Shell contains
25-34% oil which was not much used earlier. Commercial and industrial applications are being
developed in the recent decade. This research work investigates Cashew Nut Shell Liquid (CNSL) as
an alternative fuel for Internal Combustion Engine, which was not experimented earlier. CNSL can
power the engines at cashew processing industries and surrounding places and has the cost saving
advantage due to its much lesser price compared to diesel.
Cashew trees are boon to the country, in the sense that they not only yield cashew but also
can produce gasoline supplement ethanol from the fruit (cashew apple), yet another valuable product
- CNSL. India is the largest producer of Cashew in the world. In India Cashew nut cultivation
presently covers a total area of 0.70 million hectares of land, producing over 0.40 million tons of raw
cashew nuts .So the potential for cashew derived fuels to supplant the increasing energy gap is
promising. Over the past 25 years, the area under the Cashew crop has increased with an average
productivity of about 635 kg per hectare. The productivity in Kerala is 1178 kg per hectare which is
nearer to Maharashtra state, is the highest with 1300 kg per hectare .

2.2 CNSL and its extraction:The cashew nut shell is about 0.3 cm thick, having a soft feathery outer skin and a thin
hard inner skin. Between these skins is the honeycomb structure containing the phenolic material
known as CNSL. Inside the shell is the kernel wrapped in a thin skin known as the testa[4]. CNSL is
a reddish brown viscous liquid, having 4 major components viz. Anacardic acid, Cardanol, Cardol,
Methyl Cardol which are naturally occurring unsaturated phenols. CNSL is traditionally obtained as
a byproduct during the process of removing the cashew kernel from the nut. The processes used are
mainly hot-oil and roasting in which the CNSL oozes out from the shell .
Technical CNSL, (i.e. heat extracted) the heating process leads to decarboxylation of the
anacardic acid to form cardanol. Typically, the composition of technical CNSL is approximately
52% cardanol, 10% cardol, 30% polymeric material, with the remainder being made up of other
substances. The technical CNSL is often further processed by distillation at reduced pressure to

DEPT OF MECHANICAL ENGINEERING

Page 3

www.pediain.com

remove the polymeric material. The composition of distilled technical CNSL is approximately 78%
cardanol, 8% cardol, 2% polymeric material, 1% 2-methyl cardol, 2.3% heptadecyl homologue
triene, 3.8% heptadecyl homologue diene and the remainder other homologous phenols. Cardanol is
a naturally occurring monohydroxyl phenol having a long hydrocarbon chain in the Meta position.

Fig no1.Chemical Structures of Anacardic acid, Cardanol and Cardol

Methods of extraction of CSNL from cashew nut

Fig no.8 Methods for extraction of CNSL from cashew nut shell

2.2.1 Thermal extraction


There are mainly two methods for thermal exctraction, they are Roasting method and hot oil in
bath method. in India we are using the first method

Roasting method
In East Africa, the traditional method of removing CNSL involves roasting the nut in drums
or baths. The roasting process not only removes the corrosive CNSL but also makes the shell brittle,
thereby aiding the cracking process. This method causes the loss of most of CNSL. In order to

DEPT OF MECHANICAL ENGINEERING

Page 4

www.pediain.com

extract the retained CNSL, the nuts are roasted in baths at a temperature of 180185C. Vents in the
equipment dispel the unpleasant fumes. This method recovers 8590% of the liquid (Acland, 1977).
In India, method of extracting CNSL involves roasting the nuts in a shallow pan over open
charcoal fires and uses constant agitation to prevent the nuts from becoming scorched. This method
is extremely unpleasant as the shells burst releasing CNSL and fumes with resulting losses
(Woodroof, 1967).
According to an Italian patent, the shells are scraped in a rotary apparatus with sand and steel
wool, heated at 100300C for 1 h and then roasted at 400700C in an inert atmosphere, when the
oil again oozes out (Gedamet al., 1986).

Hot oil bath method


By and large, this is the most common method of commercial extraction of CNSL in practice
nowadays. The technique can be different depending upon the raw material, which is either raw
cashew nut or cashew nut shell. For the first, cashew nut shell are collected in the cylinder, where
steam heating is applied at temperatures around 200-250C for 2-3 minutes. CNSL is then released
from the shells and the process is repeated. This method yields CNSL of around 7-12% by weigh.
For the latter, the raw nuts are passed through a bath of hot CNSL itself, when the outer part of the
shell bursts open and releases CNSL. This method produces CNSL around 6-12 % by weight of
nut.15

2.2.2 Screw pressing method


The raw cashew nut shells are put in the hydraulic press or screw pressing and then exert high
pressure in order to release CNSL from the shells. This method is rather straightforward and quick
among others. However, the residue from this method still retains significant proportion of CNSL
around 10-15%.

2.2.3 Solvent extraction method


This method gives off most of CNSL compared to other methods. The oil remains in the
residue is less than 1% by weight. In the preparation step, the contamination is removed by the use of
magnetic device. Cashew nut shell is then reduced to small sizes to facilitate drying and extraction.
The organic solvent is added to the cashew nut shell. CNSL is then extracted in the solution. The
solution is separated from the solid particles and brought to boil off the solvent, which is
subsequently condensed for reuse in the process. The boiling solution will be distilled further until all
solvent is separated.

DEPT OF MECHANICAL ENGINEERING

Page 5

www.pediain.com

The percentage yield of CNSL varies with the extraction process. Indian native method of roasting
nuts and collecting the expelled liquid is reported to yield about 50% of total oil content. Extraction
with hot oil bath method gives about 8590% of total CNSL in India. Superheated steam treatment
and collection of condensate method improves the yield further by 2%
Higher the processing methods and refinement, higher will be the cost of CNSL which is
further augmented due to increased handling, transportation, chemicals and energy input for
processing, Due to bulk availability, low price and ease of production for experimentation in IC
engine expeller cold extracted CNSL is chosen. If the performance is proven then it will be the
cheapest renewable fuel will benefit the cashew processing countries.

Fig 2. Expeller machine

2.3 Cardanol production


According to the invention , CNSL is subjected to fractional distillation at 200 to 240C
under reduced pressure not exceeding 666 Pa in the shortest possible time, which gives a distillate
containing cardol and the residual tarry matter.
This first distillate is then subjected to a second distillation under the same identical
conditions of temperature and pressure when the anacardol distils over at a temperature of 205C to
210C and the cardol distils over at a temperature of 230C to 235C. The first step of the process is
to get the decarboxylated oil by heating the oil to a temperature of 170C to 175C under reduced
pressure of 3999-5330 Pa. The next two steps are the same as above for the production of both cardol
or cordanol and anacardol.

DEPT OF MECHANICAL ENGINEERING

Page 6

www.pediain.com

2.3.1 Transesterification
Cardanol oil sample, unhydrous methyl alcohol 99% grade laboratory reagent type and
sodium hydroxide was selected as the catalyst. About 4 grams of catalyst was dissolved in 200 ml
methanol to prepare alkoxide, which is required to activate the alcohol. The solution was stirred
vigorously for 20 minutes in a covered container until the alkali was dissolved completely. Mixture
was protected from atmosphere carbon dioxide and moisture as both destroy the catalyst. The alcohol
catalyst (NaOH) mixture was then transferred to the reactor containing 700 ml moisture free crude
CNSL oil. Stirring of the mixture was continued for 90 minutes at a temperature between 60-65
degrees. The round bottom flask was connected to a refractor condenser and the mixture was heated
for approximately three hours.

2.3.2 Inference and observation


The mixture was distilling and condensing within the reactor condenser. Viscosity was
reduced to half its normal value mainly due to dilution with methanol. No glycerin, because CNSL
was extracted from honeycomb structure of the cashew nut shell.

2.4. Testing of Cardanol Bio-fuel Blend (CBF)


Vegetable oil can be directly mixed with diesel fuel and may be used for running an
engine. Much of the world uses a system known as the "B" factor to state the amount of biodiesel in
any fuel mix:

100% biodiesel is referred to as B100, while

20% biodiesel, 80% petrodiesel is labeled B20

5% biodiesel, 95% petrodiesel is labeled B5

2.4.1 Properties of the CBF blends

Table no.1 Properties of CBF blend.

DEPT OF MECHANICAL ENGINEERING

Page 7

www.pediain.com

CHAPTER 3
PERFORMANCE TEST ON DOUBLE CYLINDER CI
ENGINE
In this investigation the various performance and emission tests were conducted on four strokes
twin cylinder engine manufactured by M/s Kirloskar Company limited (as shown in Fig.). The tests
were conducted up to 25% blends, because the viscosity of above 25% blends exceeds more than 5
Cs.

Fig no.4 Engine test rig.

3.1 Engine specifications:-

Table no.2 Engine specification

DEPT OF MECHANICAL ENGINEERING

Page 8

www.pediain.com

3.2 Emission Equipment:A DELTA 1600-L of MRU make Exhaust gas analyzer is used to find the NOx (ppm),
UBHC (ppm), and CO (%) emissions in the exhaust.

3.3 Operating And Recording Procedure:1. Calculated volume of 10%, 20%, 30% and 40% CNSL were taken in measuring jar and mixed
with 90%, 80%, 70%, 60% neat diesel respectively. After stirring using a magnetic stirrer for 15
minutes, blends were ready on volume basis.
2. Engine was allowed to run for 15 minutes to enable warming up of components to reach stable
condition for testing.
3. Loading was done for neat diesel in 5 steps starting from no load, 25% load, 50%load, 75% load
and full load (10Hp) condition. Once the stable running was achieved, time taken for 10cc was noted
down by a stopwatch.. Engine speed was also recorded for complete range of loading.
4. Flexible hose from the flue gas tapping was taken out and connected to the exhaust gas analyzer.
5. Five sets of readings were recorded for each fuel composition and average value was calculated
and used for calculation in order to reduce the experimental errors.
6. Readings observed for standard diesel fuel are taken as the base.
7. Subsequently four CNSL blends ranging from 10 to 25% by volume and diesel 90 to 75%
respectively, were tested one after the other by filling the blend in the biodiesel tank. The 3way valve
were opened and closed suitably to changeover from one blend to another.
8. Sufficient time was allowed to empty the previous blend in the filter, pipeline and injector lines.
Warming up time of 10 minutes for each blend is necessary to obtain accurate reading in order to
assess the correct behavior of each blend.
9. All the readings are recorded in the same way as described from steps 1 to8.. For each blend and
each loading average value of 5 measurements of each parameter is recorded in the tabular format.
10. After completing all the testing of the blends, once again the neat diesel was used to purge the
lines containing the Bio fuel so that accumulation, settling and gumming could be avoided.
11. The required characteristics curves are plotted.

DEPT OF MECHANICAL ENGINEERING

Page 9

www.pediain.com

CHAPTER 4
RESULTS AND DISCUSSIONS

The performance test on Double cylinder CI engine is conducted and various characteristic
curves are plotted . The performance of the engine was evaluated in terms of Brake Power (BP),
Brake Thermal Efficiency (BTE), brake Specific Fuel Consumption (SFC) and also the emission of
various gases like NOx, UBHC, and CO are analyzed.

4.1. Brake thermal efficiency v/s Brake power


The variation of brake thermal efficiency with brake power for different volumetric
blends is presented in below figure. In all cases, it increased with increase in brake power. This was
due to reduction in heat losses and increase in brake power with increase in load. The brake thermal
efficiency obtained for CBF blends was less than that of diesel. This lower brake thermal efficiency
obtained could be due to lower calorific value and increase in fuel consumption as compared to
diesel.

Fig no.5 Brake power V/S Brake Thermal Efficiensy

DEPT OF MECHANICAL ENGINEERING

Page
10

www.pediain.com

4.2 Brake specific energy consumption v/s Brake power


Brake specific energy consumption decreases by 25-30% approximately with increases
in brake power. This reverse trend was observed due to lower calorific value with increase in bio fuel
percentage in the blends.

Fig no.6 Brake Power V/S Brake Specific Energy Consumption

4.3 NOx Emission v/s Brake power


It has been observed that NOx emissions (ppm) increases with increased proportion of blends and
also with higher EGT (This increasing trend of EGT is mainly because of generating more power and
consumptions of more fuel at higher loads). This trend mainly because of presence oxygen in bio
fuel, this leads to more oxidation at higher temperature and responsible for more Nox emissions.

Fig no.7 Brake Power V/S NOx Emissions

4.4 HC emission v/s brake power


It has been observed that HC emissions are nominal up to B20, and more at B25, the
reason for this is the incomplete combustion.

DEPT OF MECHANICAL ENGINEERING

Page
11

www.pediain.com

Fig no.8 Brake Power V/s HC Emissions

4.5. CO emission v/s brake power


It is observed that the carbon monoxide emissions increases with higher blends, and
increases slightly more after 20% blends. The minimum and maximum CO produced was
0.03e0.08%. At higher loads Co emissions slightly decreased. At elevated temperature, performance
of the engine improved with relatively better burning of the fuel resulting in decreased CO.

Fig 9.Brake Power V/S Co Emissions

DEPT OF MECHANICAL ENGINEERING

Page
12

www.pediain.com

CHAPTER 5
CONCLUSION
Based on the results of the study the following conclusions were obtained.

The significant factor of cardanol bio fuel is its low cost, its abundance and it is a byproduct
of cashew nut industries so it helps to reduce costly petroleum imports.

The price of Cashew Nut Shell Oil is in the range of US $ 0.34 to 0.51 per litre (2011 prices)
in India depending upon the location and grade. Thus the idea of blending CNSL up to 35%
with diesel (US $ 0.9/ litre) direct fuel cost savings of 20 to 25% is possible. At present, all
the biodiesel products cost 3 to 5 times the diesel price[3],

The properties like density, viscosity, flash and fire points of cardanol bio fuel volumetric
blends under test are higher, and calorific values are lower and are in the range of 94-96%that
of diesel.

The brake specific energy consumption decreases by 30-40% approximately with increases in
brake power. This reverse trend was observed due to lower calorific value with increase in
bio fuel percentage in the blends.

The brake thermal efficiency obtained for Cardanol bio fuel volumetric blends was less than
that of diesel. This lower brake thermal efficiency obtained could be due to lower calorific
value and increase in fuel consumption as compared to diesel.

The NOx emissions (ppm) increases with increased proportion of blends and also with higher
EGT. This trend mainly because of presence oxygen in bio fuel, this leads to more oxidation
at higher temperature and responsible for more NOx emissions.

The HC emissions are nominal up to B20, and more at B25, the reason for this is the
incomplete combustion.

The Carbon monoxide emissions increases with higher blends, and increases slightly more
after 20% blends. At higher loads CO emissions slightly decreased may be due to at higher
temperatures the performance of the engine improved with relatively better burning of the
fuel resulting in decreased CO.

Low sulphur content and hence environment friendly.

Personal safety is improved (flash point is higher than that of diesel).

DEPT OF MECHANICAL ENGINEERING

Page
13

www.pediain.com

It is biodegradable.

It contains low aromatics compared to diesel.

The ozone (smog) forming potential of CNSL constituents are less than diesel fuel.
Generally, the ozone forming potential of the biofuel hydrocarbon emission, is 50% of diesel.

From the above study it is observed that up to 20% blends of cardanol bio fuels may be used as
diesel fuel substitute in CI Engines without any modifications.

DEPT OF MECHANICAL ENGINEERING

Page
14

www.pediain.com

REFERENCES
.
[1] A.S. Ramadhas , S. Jayaraj, C. Muraleedharan ,Use ofvegetable oils as I.C. engine fuels.
journal of Renewable Energy 29 (2004) 727742.

[2] Mallikappa D.N., RanaPratap Reddy, Ch.S.N. Murthy.Performance and emission


characteristics of double cylinder CI engine operated with cardanol bio fuel blends, journal of
Renewable Energy 38 (2012) 150-154

[3] V. Palvannan K. Balagurunathan .Technical Sustainability of Cashew Nut Shell Liquid as a


Renewable Fuel in Compression Ignition Engine.European Journal of Scientific Research ISSN
1450-216X Vol.76 No.4 (2012)614-627

DEPT OF MECHANICAL ENGINEERING

Page
15

www.pediain.com

Вам также может понравиться