Академический Документы
Профессиональный Документы
Культура Документы
y
L
Se
rie
KHJ-Industrial Lighting
Mobile Light Tower
INTRDUCTION
Executive standard
IEC 60598-1:2003 Luminaires - Part 1: General
requirements and tests
IEC 60598-2-22:2002 Luminaires - Part 2-22:
Particular requirements; Luminaires for
emergency lighting
Application:
1.Construction Sites, work over, Disaster Sites, Remote Location.
2
1
CHRACTERISTIC DETAILS
High strength
aluminum alloy
pneumatic lifting
rod, 4.5 meters
extended height,
load bearing
30kg
3
1
PRODUCT PARAMETER
Product parameter
Duration
Value
unit
Parameter
S/N
KJellyFish
220
Quantity
PCS
Power
200
400
Luminous flux
lm
17700
35400
long time
generator
12
Battery box
4
Mast
Generator Parameter
18h(200W)/8h(400W)
Min. height
mm
1800
Max. height
mm
4500
220
Power/Tank capacity
W/L
Size
Lighting
fixture plate
L*W*H
Mast
2000/14.5
800*320*810
mm
88*2000-4000
Generator
750*500*840
11.5
Mast
7
Weight
Generator
Kg
Battery box
8
IP Code
Battery
10
11
Inverter
Chargers
800*420*510
800*260*510
21.5
8
23
108
Lamp
IP66
Generator
Capacity
12V 150AH
Quantity
pcs
input voltage
24VDC
Output voltage
220VAC 50Hz
Output Power
Waveform
input voltage
200VAC-240VAC
Output Power
360W MAX
4
1
500W
SIZE
SIZE
KJellyFish 4pcs(100*4)
KJellyFish 2pcs(100*2)
5
1
OPTIONAL PARTS
Optional parts
LED light
S/N
Power
KLMDHW-2 KJellyFish
Quantity
Battery capacity
Installation
Control
2000W/12H
KLMDHW-4
100W
Frame or
KLB150DW-2 KJellyFish
24V 150Ah/18h
KLB150DW-4
24V 150Ah/8h
100W
Remarks
Auto lifter
Manual or
Remote
Optional parts
S/N
Material
Optional parts
Weight
Quantity
Remarks
Shield
Nylon
0.5
Optional
Spools
PA+PVC
1.5
Optional
Repairing parts
S/N
Optional parts
Quantity
Sparking plug
Battery box
Remarks
6
1
SERVICE
Caution
1.To avoid the risk of fire, explosion, or electric shock, this product should be installed, inspected, and maintained
by a qualified electrician only, in accordance with all applicable electrical codes.
2.To avoid electric shock:
Be certain electrical power is OFF before and during installation and maintenance.
Luminaire must be supplied by a wiring system with an equipment grounding conductor.
3.To avoid burning hands:
Make sure lens and housing are cool when performing maintenance.
4.To avoid explosion:
1)Make sure the supply voltage is the same as the luminaire voltage.
2)Do not install where the marked operating temperatures exceed the ignition temperature of the hazardous
atmosphere.
3)Do not operate in ambient temperatures above those indicated on the luminaire nameplate.
4) All gasket seals must be clean.
5)Before opening, electrical power to the luminaire must be turned off. Keep tightly closed when in operation.
Package Check
1. Check the carton and all the components according to the packing list.
2.Make sure the product is in good conditions.
Transportation:
Please keep this product from heavy mechanical shock, exposure to strong sunshine, throwing, rolling
and stress during transport.
Storage:
Kept in dry,clean and well-ventilated ,non-corrosive medium warehouse,the ambient
temperature should be -20 to 40.
After-sales service
Installation and maintenance must be according to the instruction.
If customer can not deal with it by themselves ,please contact with sales department.
Contact
SHENZHEN KHJ SEMICONDUCTOR LIGHTING CO., LTD.
-------------------------------------------------------------------------------Address: 4-5 Floor,Building 7,HuangBeiLingJingXuan Industrial park,No.2 Dong Huan Rd,Yousong,
Longhua new District,Shenzhen China.
Tel: +86-755-33953361
E-mail: khjledsales@khj.cn
Fax: +86-755-28030133
Web: www.khjled.com