Вы находитесь на странице: 1из 9

OS-1085: Linear Steady State Heat Convection Analysis

Page 1 of 9

HyperWorks Solvers

OS-1085: Linear Steady State Heat Convection Analysis


This tutorial performs a heat transfer analysis on a steel pipe, as shown in Figure 1. The
temperature on the inside surface of the pipe is 60 C. The outside surface is exposed to the
surrounding air, which is at 20 C. The temperature distribution within the pipe can be determined
by solving the linear steady state heat conduction and convection solution.

Figure 1: Model review

The following exercises are included:

Create the thermal material and property

Create and apply the thermal boundary conditions on the model

Submit the job to OptiStruct

Post-process the results in HyperView

Set up the Model in HyperMesh


Step 1: Load the OptiStruct User Profile and import the model
1.

Launch HyperMesh.

2.

Select OptiStruct in the User Profiles dialog and click OK. This loads the user profile. It
includes the appropriate template, macro menu, and import reader, paring down the
functionality of HyperMesh to what is relevant for generating models for OptiStruct.

3.

Click the Import Solver Deck panel toolbar icon


type: is OptiStruct.

. An Import window opens. The File

file:///C:/Program%20Files/Altair/13.0/help/hwsolvers/rd1085.htm?toc=0&printWindow

3/12/2016

OS-1085: Linear Steady State Heat Convection Analysis

Page 2 of 9

4.

In the File: field, click the open file icon

. A Select OptiStruct file browser window opens.

5.

Select the thermal.fem file, located in the HyperWorks installation directory under
<install_directory>/tutorials/hwsolvers/optistruct/.

6.

Click Open. The location of thermal.fem now displays in the File: field.

7.

Click Import > Close. The thermal.fem database is loaded into the current HyperMesh
session.

Step 2: Create the thermal material properties


Create the material and property collectors before creating the component collectors.
1.

In the Model browser, right-click and select Create > Material. A default MAT1 material
displays in the Entity Editor.

2.

For Name, enter steel.

3.

Check the box in front of MAT4.


MAT4 card image appears below MAT1 in the Entity Editor. The MAT1 card defines the isotropic
structural material. MAT4 card is for the constant thermal material. MAT4 uses the same
material ID as MAT1.

4.

Enter the following values for the material, steel, in the Entity Editor.
[E] Youngs modulus = 2.1 x 1011 Pa
[NU] Poissons ratio = 0.3
[RHO] Material density = 7.9 x 103 Kg/m3
[A] Thermal expansion coefficient = 1.0 x 10-5 / C
[K] Thermal conductivity = 73W / m C
[H] Heat transfer coefficient = 40W / m2 C

file:///C:/Program%20Files/Altair/13.0/help/hwsolvers/rd1085.htm?toc=0&printWindow

3/12/2016

OS-1085: Linear Steady State Heat Convection Analysis

Page 3 of 9

Figure 2: The Material Entity Editor

A new material, steel, is created with both structural and thermal properties.
5.

In the Model browser, right-click and select Create > Property. A default PSHELL property
displays in the Entity Editor.

6.

For Name, enter solid.

7.

For Card Image, select PSOLID and click Yes to confirm.

8.

For Material, click Unspecified > Material.

9.

In the Select Material dialog, select steel and click OK.


The property of the solid steel pipe has been created as 3D PSOLID. Material information is
linked to this property.

Step 3: Link the material and property to the existing structure


Once the material and property are defined, they need to be linked to the structure.
1.

In the Model browser, click the component pipe. The Entity Editor opens.

file:///C:/Program%20Files/Altair/13.0/help/hwsolvers/rd1085.htm?toc=0&printWindow

3/12/2016

OS-1085: Linear Steady State Heat Convection Analysis

2.

For Property, click Unspecified > Property.

3.

In the Select Property dialog, select solid and click OK.

Page 4 of 9

The material steel now is automatically linked to the component pipe.

Apply Thermal Boundary Conditions on the Model


In this exercise the thermal boundary conditions will be applied on the model and saved in a
predefined load collector spc_temp. A predefined node 4679 specifies the ambient temperature. A
predefined node set node_temp contains the nodes on the inside surface of the pipe.

Step 4: Create temperatures on the inner surface of the pipe


2.

From the Analysis page, click constraints.

3.

Go to the create subpanel.

4.

Make sure the current selection field is set to nodes.

5.

Click nodes >> by sets.

6.

Select node_temp and click select.

7.

Uncheck the box in front of dof1, dof2, dof3, dof4, dof5, and dof6 and verify that the entry
fields are set to 0.0.

8.

Set load types = to SPC.

9.

Click create.
This applies the temperature 0.0 on the inside nodes. In the next step, the temperature value
will be updated to 60.

10. Click the Card edit icon

11. Click loads >> by collector.


12. Check the box in front of spc_temp and click select.
13. Click config= and select const.
14. Click type= and select SPC.
15. Click edit.
16. In the field of D, enter 60.0.
17. Click return three times to go back to the Analysis page.

Step 5: Create ambient temperature


1.

Make sure spc_temp is the current load collector.

2.

From the Analysis page, select the constraints panel.

3.

Go to the create subpanel.

4.

Click nodes >> by id.

5.

Input the ID of the predefined node 4679. Node 4679 should be highlighted.

6.

Uncheck the box in front of dof1, dof2, dof3, dof4, dof5, and dof6 and verify that the entry
fields are set to 0.0.

file:///C:/Program%20Files/Altair/13.0/help/hwsolvers/rd1085.htm?toc=0&printWindow

3/12/2016

OS-1085: Linear Steady State Heat Convection Analysis

7.

Click create.

8.

Click Card edit icon

9.

Select loads entry.

Page 5 of 9

10. Select the ambient spc just created on the screen.


11. Click config= and select const.
12. Click type= and select SPC.
13. Click edit.
14. In the field of D, enter 20.0. The temperature boundary conditions are created, as shown in
the following figure.

Figure 3: Thermal boundary conditions.

15. Click return three times to go back to the Analysis page.

Step 6: Create CHBDYE surface elements for heat convection


Surface elements are to be created to simulate the heat exchange between the solid pipe and the
surrounding air. A predefined element set elem_convec, which contains the solid elements on the
outer surface of the pipe, is used to define the surface elements.
1.

Click BCs > Create > Interfaces.

2.

For Name, enter convection.

3.

For Card Image, select CONVECTION from the drop-down menu.

4.

Click Color and select a color from the palette.

file:///C:/Program%20Files/Altair/13.0/help/hwsolvers/rd1085.htm?toc=0&printWindow

3/12/2016

OS-1085: Linear Steady State Heat Convection Analysis

5.

Click MID to activate it.

6.

For Material, click Unspecified > Material.

7.

In the Select Material dialog, select steel and click OK.

Page 6 of 9

An element group convection and a free convection property PCONV are created.
8.

For Slave Entity IDs, select Elements. A panel appears under the graphics area.

9.

Click on the switch button beside elems and select faces from the list.

10. Click the highlighted solid elems and select by sets from the selection menu.
11. Select element set elem_convec and click select.
12. Click nodes in face nodes field.
13. Select 4 nodes on the surface face of a solid element, as shown in the following figure.

Figure 4: Selected surface nodes on the solid element outside the pipe.

14. In the break angle = field, enter 89.0.


15. Click add. This adds the CHBDYE surface elements to the solid elements on the outer surface
following the same side convention, as shown in the following figure.

file:///C:/Program%20Files/Altair/13.0/help/hwsolvers/rd1085.htm?toc=0&printWindow

3/12/2016

OS-1085: Linear Steady State Heat Convection Analysis

Page 7 of 9

Figure 5: Surface elements on the outer layer of the pipe.

16.

Click return to go back to the Create group window.

Step 7: Define the convection boundary condition to surface elements


1.

Click the Card Edit icon

2.

Select elems entry.

3.

Click elems >> by group.

4.

Check the box in front of CONVECTION and click select.

5.

Click config= and select slave4.

6.

Click type= and select CHBDYE4.

7.

Click edit and go to the CHBDYE card image panel.

8.

Check the box in front of CONV.

9.

Click TA1 and input the ambient node ID 4679, as shown below.

Figure 6: Defining the convection boundary condition

10. Click return three times to go back to the Analysis page.

Step 8: Create a heat transfer loadstep


An OptiStruct steady state heat convection loadstep will be created which references the thermal
boundary conditions in the load collector spc_temp. The gradient, flux, and temperature output for
the heat transfer analysis will also be requested in the loadsteps panel.

file:///C:/Program%20Files/Altair/13.0/help/hwsolvers/rd1085.htm?toc=0&printWindow

3/12/2016

OS-1085: Linear Steady State Heat Convection Analysis

Page 8 of 9

1.

In the Model browser, right-click and select Create > Load Step. A default loadstep displays
in the Entity Editor.

2.

For Name, enter heat_transfer.

3.

Click on the Analysis type field and select Heat transfer (steady state) from the dropdown menu.

4.

For SPC, click Unspecified > Loadcol.

5.

In the Select Loadcol dialog, select spc_temp and click OK.

6.

Check the box next to Output.

7.

Activate the options of FLUX and THERMAL on the sub-list.

8.

Activate the FORMAT fields for both outputs and select H3D format.

9.

Activate the OPTION fields for both outputs and select ALL.
The FORMAT and OUTPUT fields for THERMAL output may open up a new window. Click on the
first field in the window to select the corresponding values.
FLUX and THERMAL output can also be requested in the Control cards panel on the Analysis
page.

Submit the Job


Step 9: Launch OptiStruct
1.

From the Analysis page, click OptiStruct.

2.

Click save as. A Save As browser window opens.

3.

Select the directory where you would like to write the OptiStruct model file and enter the
name for the model, thermal_complete.fem, in the File name: field. The .fem filename
extension is the recommended extension for Bulk Data Format input decks.

4.

Click Save.
Note the name and location of the thermal_complete.fem file displays in the input file: field.

5.

Set the memory options: toggle to memory default.

6.

Set the run options: toggle to analysis.

7.

Set the export options: toggle to all.

8.

Click OptiStruct. This launches the job.


If the job is successful, you should see new results files in the directory from which
thermal_complete.fem was selected. The thermal_complete.out file is a good place to look
for error messages that could help debug the input deck if any errors are present.

View and Post process the Results


Gradient temperatures and flux contour results for the steady state heat conduction analysis and
the stress and displacement results for the structural analysis are computed from OptiStruct.
HyperView will be used to post process the results.

file:///C:/Program%20Files/Altair/13.0/help/hwsolvers/rd1085.htm?toc=0&printWindow

3/12/2016

OS-1085: Linear Steady State Heat Convection Analysis

Page 9 of 9

Step 10: View the results for heat transfer analysis


1.

When the message Process completed successfully is received in the HyperWorks Solver View
dialog, click HyperView. HyperView is launched and the results are loaded. A message
window appears to inform of the successful model and result files loading into HyperView.

2.

Click Close to close the message window, if one appears.

3.

Click the Contour toolbar icon

4.

Select the first pull-down menu below Result type: and select Grid Temperatures(s).

5.

Click Apply. A contour plot of grid temperatures is created.

You may have to use Edit Legend in the Contour panel to get the contour, as shown in Figure
7.
6.

Select the first pull-down menu below Result type: and select Element Fluxes (V).

7.

Click Apply.
You may have to use Edit Legend in the Contour panel to get the contour. Both temperature
and flux contour plots are shown in Figure 7.

Figure 7: Results of heat transfer analysis

See Also:
OptiStruct Tutorials

file:///C:/Program%20Files/Altair/13.0/help/hwsolvers/rd1085.htm?toc=0&printWindow

3/12/2016

Вам также может понравиться