Академический Документы
Профессиональный Документы
Культура Документы
Provide our customers with top quality, defect-free, cost competitive products,
which shall meet or exceed the requirements and specifications.
Treat our customers with courtesy and respect by giving them individual
assistance each and every time they contact us or come by.
Answer each customers questions with the most honest, thoughtful and
knowledgeable response available.
Products:
WeamcoMetric
Bi-directional Meter Provers Uni-directional Meter Provers
Volumetric Meter Provers (Tank Style) Portable Provers
Sphere & Pig Detector Switches (Home of Mag-Tek)
Strainers: Fabricated Vertical Permanent Basket Tee Y and
Assorted Temporaries (Cones, Baskets, etc.)
Corrosion Coupon Holders
Line Blinds Spacer Rings Bleed Rings
Sample Equipment
Custom Fabrication & Pipeline Accessories.
Authorized Codes:
Physical Address:
Mailing Address:
Web Site:
www.weamco.com
Email:
sales@weamco.com
Phone:
(918) 445-1141
Toll Free:
(800) 331-3790
Fax:
(918) 445-4617
Hours:
Organized:
Federal Identification
Number:
73-0967826
Duns Number:
06-455-8554
Strainers
Meter Provers
Bi-Directional
Uni-Directional
Portable & Volumetric
Mag-Tek Sphere
Detector Switches
Prover Accessories
Corrosion Coupon Holders
Line Blinds & Bleed Rings
Sampling Equipment
Toll Free 800-331-3790
Oklahoma Home Office 918-445-1141
Fax 918-445-4617 Email sales@weamco.com
www.weamco.com
Custom Fabrication
WeamcoMetric Strainers
WeamcoMetric (The First Name in Strainers) has been manufacturing dependable high quality
Permanent and Temporary Strainers since 1973. Industries such as Pipelines, Hydrocarbon,
Chemical, Power, Gas, Pulp & Paper, Process Plants, and Refineries all over the world have
come to depend on WeamcoMetrics impeccable service, quality and dependability.
At WeamcoMetric all engineering, design, manufacturing, testing and painting of our
fabricated Strainers is started and completed in house at our Sapulpa, Oklahoma plant.
This provides us with a major advantage in the areas of quality control and scheduling.
We believe in a hands-on approach to detail and accountability for your work.
STRAINERS
A. Strainer Definition and Purpose
Strainers are used normally for the protection of pipeline and process equipment installed downstream
of the strainer. The equipment protected by our strainers is generally more expensive than the total
installation cost of a strainer. Also this equipment is critical to the pipeline or process operation.
Strainers use perforated and/or wire mesh media for straining purposes. These materials are two
dimensional, meaning they do not have a Depth or Dirt Holding capacity. This means that when
a debris particle is caught in the straining media the opening is blocked or plugged. This results in
reduced available opening for flow. Strainer sizing and selection are critical to insure your cleaning
cycle time, particle size retention and pressure drop requirements are achieved.
B. Straining Media Selection for Basket
The following is a general guideline of media we have typically seen used in the various applications
shown, but is in no way intended to supercede your specific requirements. This information is strictly
based on observations made from our many years of experience and WeamcoMetric makes no
guarantees that it is correct and/or applicable for your specific application.
Liquid Turbine Meters
P.D. Meters
Centrifugal Pumps
Service: Crude Oil
Refined Products
Coke Fines
Water
Style
WeamcoMetric Type
1.
Vertical Basket
FV or FT
Strainers
2.
Tee Strainers
TSF or TSW
TLF or TLW
TVF or TVW
STRAINERS
Application Description or Requirement
Style
Y-Strainers
WeamcoMetric Type
3.
FYW or FYF
4.
Temporary
Cone and
Basket
Strainers
CP, CWI,
CWO
BP, BWI,
BWO
5.
Flat Strainers
FP or F-PF
Rev. 1/12
1.
Flow Rate
2.
3.
Design Pressure
4.
Design Temperature
5.
Line Size
6.
Flange Rating
7.
8.
9.
10.
11.
12.
13.
Paint Requirements
14.
15.
All WEAMCO strainers are fabricated on-order, and we can custom design
a unit to match your dimensional and service requirement. JUST ASK!!
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
Permanent Strainers
Meter Provers
Bi-Directional
Uni-Directional
Portable & Volumetric
Mag-Tek Sphere
Detector Switches
Prover Accessories
Corrosion Coupon Holders
Line Blinds & Bleed Rings
Sampling Equipment
Toll Free 800-331-3790
Oklahoma Home Office 918-445-1141
Fax 918-445-4617 Email sales@weamco.com
www.weamco.com
Custom Fabrication
Materials Data
Perforated and Wire Cloth
PERFORATED PATTERNS NORMALLY STOCKED
PATTERN
DIA
CENTERS
% OPEN
AREA
MATERIAL/GAUGE
# HOLES
PSI
C.S.
304SS
316SS
1/16
1/8
23
74
16
22
1/8
3/16
40
33
14,11
14
14*
3/16
1/4
51
18
14
16
1/4
3/8
40
11
14,11
14,11
3/8
9/16
40
3,7
11
11
1/2
11/16
48
2,4
11
11
* Also in Monel
GAUGE
% OPEN
AREA
MATERIAL
1/2
16 Flattened
62
C.S; 304SS
3/4
13 Flattened
72
C.S; 304SS
WIRE
DIA.
OPENING
% OPEN
AREA
3x3
.080
.2533
57.6
4x4
.063
.1870
56.0
8x8
.035
.0900
51.8
8x8
.047
.0780
38.9
10 x 10
.035
.0650
42.3
WIRE
DIA.
OPENING
% OPEN
AREA
20 x 20
.016
.0340
46.2
30 x 30
.013
.0203
37.1
40 x 40
.010
.0150
36.0
60 x 60
.0075
.0092
30.5
80 x 80
.0055
.0070
31.4
100 x 100
.0045
.0055
30.3
Bulletin AC112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
2
3
4
6
8
10
12
14
16
18
20
24
30
COMMON DIMENSIONS
O.D.
F.F.
TH
BC**
AC**
DRAIN
42
6s
8s
10w
12w
16
18
18
24
24
26
30
36
17
20
23
26
30
34
37
37
44
45
48
56
62
16
20
24
29
35
42
46
53
60
65
71
95
108
9
11
14
17
21
25
28
33
36
39
45
64
71
7
9
10
12
14
17
18
20
24
26
26
31
37
1
1
12
12
12
12
2
2
2
2
2
2
2
44
99
207
330
509
792
1034
1232
1885
2073
2512
4310
5938
18
40
83
132
204
317
414
493
754
829
1005
1724
2375
524%
536%
650%
457%
408%
402%
366%
358%
413%
355%
345%
406%
353%
2
3
4
6
8
10
12
14
16
18
20
24
30
*Based on Standard Basket perforated 1/8 diameter holes on 3/16 centers. Open Area and Open Area Ratio also applicable to perforated patterns 1/4
diameter holes on 3/8 centers and 3/8 diameter holes on 9/16 centers. Other patterns available. See Bulletin AC112.
All dimensions are in inches. Dimensions are applicable up to 600# ANSI. Larger line sizes available. Std. Design ASME/ANSI B31.4
INFORMATION REQUIRED
1. Quantity
2. Flow Rate
3. Design pressure and temperature
4. Special Size Strainer (if other than standard, advise dimensions)
(918) 445-1141
5. Line size and flange rating or beveled for welding
(800) 331-3790
6. Wire cloth size (See Bulletin AC112) - under Strainer Design
Fax: (918) 445-4617
7. Housing and basket material (Carbon steel is standard) - others are available
sales@weamco.com
8. Special features
9. Product service and equipment being protected if available.
Bulletin FV112
www.weamco.com
2
3
4
6
8
10
12
14
16
18
20
24
30
COMMON DIMENSIONS
O.D.
F.F.
TH
BC**
AC**
DRAIN
42
6s
8s
10w
12w
16
18
18
24
24
26
30
36
17
20
23
26
30
34
37
37
44
45
48
56
62
16
20
24
29
35
42
46
53
60
65
71
95
108
9
11
14
17
21
25
28
33
36
39
45
64
71
7
9
10
12
14
17
18
20
24
26
26
31
37
1
1
12
12
12
12
2
2
2
2
2
2
2
66
140
245
366
550
813
1037
1247
2019
2170
2569
4055
5561
26
56
98
146
220
325
415
499
808
868
1028
1522
2224
787%
758%
770%
505%
440%
412%
367%
362%
442%
387%
369%
403%
342%
2
3
4
6
8
10
12
14
16
18
20
24
30
*Based on Standard Basket perforated 1/8 diameter holes on 3/16 centers. Open Area and Open Area Ratio also applicable to perforated patterns
1/4 diameter holes on 3/8 centers and 3/8 diameter holes on 9/16 centers. Other patterns available. See Bulletin AC112.
All dimensions are in inches. Dimensions are applicable up to 600# ANSI. Larger line sizes available. Std. Design ASME/ANSI B31.4
**Dimensions BC and AC for the Type FT Strainer are not fixed and can
be located at purchasers option within the shell length or can be offset
without changing the Basket Area.
Bulletin FT112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
Example: A 6 line flowing 1,000 G.P.M. liquid with a specific gravity of 0.6.
To find the pressure drop, enter the chart at 1,000 G.P.M. and intersect the
line representing a 6 FV, and FT strainer. Read to the left for each type of
fabricated strainer to intersection of S.G. = 1.0. Follow diagonal guide lines
down to S.G. = 0.6. Read straight to the left for the corrected pressure
drop. In the example the FV strainer would have a pressure drop of 0.65
P.S.I., the FT 0.45 P.S.I. The strainer selection would depend upon piping
configuration and allowable pressure drop.
Bulletin PD112
PERFORATED
1/8 or 1/4 DIA.
Use Chart
1.6
1.7
1.9
VISCOSITY
SSU
30 (Water)
500
1,000
2,000
2.4
2.2
1.9
1.3
40 mesh
2.7
2.4
2.1
1.5
60 mesh
2.9
2.6
2.4
1.6
3.2
2.8
2.6
1.7
WEIGHTS
BASED ON CATALOG STANDARD UNITS
FV AND FT STRAINERS
2 150#
68#
3 150#
120#
4 150#
190#
6 150#
295#
8 150#
460#
10 150#
690#
12 150#
910#
2 300#
95#
3 300#
180#
4 300#
280#
6 300#
450#
8 300#
670#
10 300#
1020#
12 300#
1350#
2 600#
140#
3 600#
290#
4 600#
500#
6 600#
820#
8 600#
1120#
10 600#
1720#
12 600#
2350#
TEE STRAINERS
2 150#
W-18#
F-30#
3 150#
W-31#
F-51#
4 150#
W-51#
F-81#
6 150#
W-97#
F-145#
8 150#
W-159#
F-237#
10 150#
W-238#
F-342#
12 150#
W-365#
F-525#
16150#
W-614#
F-894#
2 300#
W-26#
F-44#
3 300#
W-47#
F-77#
4 300#
W-74#
F-124#
6 300#
W-143#
F-227#
8 300#
W-224#
F-358#
10 300#
W-351#
F-533#
12 300#
W-529#
F-809#
16300#
W-887#
F-1387#
2 600#
W-36#
F-60#
3 600#
W-67#
F-113#
4 600#
W-122#
F-206#
6 600#
W-247#
F-409#
8 600#
W-387#
F-627#
10 600#
W-639#
F-1019#
12 600#
W-822#
F-1272#
16 600#
W-1426#
F-2206#
W = Weld Ends
F = Flanged Ends
Bulletin WT112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
Tee Strainers
TYPE
TYPE
TYPE
TYPE
TYPE
TYPE
TYPE
TYPE
TYPE
TYPE
TYPE
TYPE
PIPE
SIZE
150#
H1F
H2F
300#
HIF
H2F
600#
H1F
H2F
PIPE
SIZE
2
3
4
6
8
10
12
14
16
18
20
24
5
6 3/4
8 1/4
11 1/4
14
17
20
22
24
27
30
34
2 1/2
3 3/8
41/8
5 5/8
7
8 1/2
10
11
12
13 1/2
15
17
5
6 1/8
7 1/8
9 1/8
11
12 1/2
14 1/2
16
17
19
20 11/16
23
7 1/2
9 1/2
11 1/4
14 3/4
18
21
24 1/2
27
29
32 1/2
35 11/16
40
10
12 1/4
14 1/4
18 1/4
22
25
29
32
34
38
41 3/8
46
5 1/4
6 1/2
7 1/2
9 1/2
11 3/8
13 1/8
15 1/8
16 5/8
17 3/4
19 3/4
21 3/8
23 5/8
7 3/4
9 7/8
11 5/8
15 1/8
18 3/8
21 5/8
25 1/8
27 5/8
29 3/4
33 1/4
36 3/8
40 5/8
10 1/2
13
15
19
22 3/4
26 1/4
30 1/4
33 1/4
35 1/2
39 1/2
42 3/4
47 1/4
5 5/8
6 7/8
8 3/8
10 1/2
12 1/2
14 3/4
16 3/8
17 3/4
19 1/4
21
22 3/4
25 1/4
8 1/8
10 1/4
12 1/2
16 1/8
19 1/2
23 1/4
26 3/8
28 3/4
31 1/4
34 1/2
37 3/4
421/4
11 1/4
13 3/4
16 3/4
21
25
29 1/4
32 3/4
35 1/2
38 1/2
42
45 1/2
50 1/2
2
3
4
6
8
10
12
14
16
18
20
24
Dimensions in inches and are based on standard weld tee with raised face or ring joint weld neck flanges. Standard weight tee and W.N. bore for 150# and 300# . Extra strong tee
and W.N. bore for 600# , 400# , 900# , 1500# , 2500# in RF/FF/RJ and other facings available. Blind flange can be tapped for blowdown. Quick opening closures available on any
type or rating tee strainer. Advise pipe schedule or wall thickness required for higher pressure applications. Std. Design ASME/ANSI B31.4
Bulletin TEE112
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
Y Strainers
TYPE FYW
(Weld End)
TYPE FYF
(Flanged End)
SIZE
O.D.
TYPE FYW
W-W
TYPE FYF
F-F
BLOWDOWN
(NPT)
4 1/2
18 1/2
26
12
3/4
6 5/8
20 1/4
30
16
3/4
8 5/8
26
37
20
10
10 3/4
33 1/2
46
23
12
12 3/4
38 1/4
51
26
1 1/2
14
14
42 1/2
56
29
1 1/2
16
16
47 1/2
62
32
1 1/2
18
18
53
68
36
1 1/2
20
20
57 1/2
73
39
24
24
63 1/2
80
43
WEAMCO Y Strainers can be fabricated from any commercially available pipe including carbon steel, low and intermediate
alloy steels and stainless steel. The F-F dimensions shown for the Type FYF Strainer is applicable for any flange rating or facing
150# ANSI thru 300# ANSI. Higher pressures on application. Special Dimensions available to match your piping requirements.
Std. Design ASME/ANSI B31.4
INFORMATION REQUIRED
Standard Basket Perforated 1/8 Diameter holes on 3/16 Centers
1. Quantity
(Other Patterns, wire mesh and liners available,
2. Line Size
see WEAMCO Bulletin AC 112 or Consult Factory)
3. Weamco type
4. Flange Rating and Face
5. Housing material *
6. Housing Pipe Schedule
7. Basket material *
8. Mesh liner if required
9. Additional Features
(918) 445-1141
*Carbon Steel is standard. Other materials are available.
(800) 331-3790
EXAMPLE: 2 6 300# RF WEAMCO type FYW, C.S. housing,
Std. Wt. 304 SS basket, 1 NPT blowdown, 300# R.F.
Bulletin FY112
Optional Accessories
For Permanent Strainers
Side Drains
Legs or Base Skirt
Blowdown Basket
Bulletin OA112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
Differential Pressure
Gauge Assembly
Bulletin OA112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
Temporary Strainers
Meter Provers
Bi-Directional
Uni-Directional
Portable & Volumetric
Mag-Tek Sphere
Detector Switches
Prover Accessories
Corrosion Coupon Holders
Line Blinds & Bleed Rings
Sampling Equipment
Toll Free 800-331-3790
Oklahoma Home Office 918-445-1141
Fax 918-445-4617 Email sales@weamco.com
www.weamco.com
Custom Fabrication
Cone Strainers
LENGTH L C
LINE STD.
SIZE LGTH. 75% 100% 150% 200% 300%
2
4
4
6
8
11
3
6
6
9
12
18
4
8
8
10
13
20
6
11
11
13
18
27
8
12
12
17
23
34
10
12
12
14
22
29
44
12
12
12
16
26
35
50
14
14
14
18
27
36
53
16
16
16
21
31
40
60
18
18
18
24
35
46
68
20
20
20
26
39
51
76
24
23
23
31
45
60
90
30
29
29
38
57
76
114
36
33
33
44
66
88
126
TYPE CP
8 x 8 Std
TYPE
T
YPE C
CWI
WI
Wire Cloth Inside
*Perforated Support
TYPE CWO
Wire Cloth Outside
*Perforated Support
TYPE CW
1 Ply Heavy
Wire
TYPE CTP
Expanded Support
Inside and Outside
(Customers Choice)
Percent open areas shown are compared to the cross sectional flow area
of Standard Weight Pipe. All dimensions are in inches. Standard length
designed to fit weld neck flange plus long radius weld elbow. OD is
designed to fit inside flange bolt hole circle. Full face is available, add FF to
type of strainer. ID is designed to fit inside standard weight pipe for 150#
and 300# rating, extra strong pipe for 600# rating. Advise pipe wall or
schedule for higher pressure ratings. See Bulletins BP112 and FP112 for
additional Temporary Strainer information.
Bulletin CP112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
Cone Strainers
Additional Features
ID
SIZE
150/300 lb.
RF/FF/RJ
400/600 lb.
RF/RJ
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
6
8
10
12
14
16
18
20
24
5/8
7/8
1 1/8
1 3/8
1 7/8
2 1/4
2 7/8
3 3/4
5 3/4
7 1/2
9 1/2
11 1/2
12 7/8
14 3/4
16 3/4
18 3/4
22 3/4
5/8
7/8
1 1/8
1 3/8
1 7/8
1 15/16
2 33/64
3 5/8
5 5/8
7 3/8
9 1/4
11 1/8
2
2
2
3
1/8
1/2
7/8
1/4
4
4 5/8
5 1/4
6 3/4
8 5/8
10 3/4
13 1/8
15 7/8
17 1/2
20
21 3/8
23 5/8
28
400 lb.
RF
2
2
3
3
4
1/2
3/4
1/8
5/8
1/4
5
5 3/4
6 7/8
9 5/8
11 3/4
13 7/8
16 1/4
18 3/4
20 7/8
23 1/8
25 1/4
30
600 lb.
RF
2
2
3
3
4
1/2
3/4
1/8
5/8
1/8
5
5 3/4
7 1/2
10 1/8
12 3/8
15 1/2
17 3/4
19 1/8
22
23 7/8
26 5/8
30 7/8
900 lb.
RF
1500 lb.
RF
300/400
600 lb.
RJ
900 lb.
RJ
2 5/8
3
3 1/4
3 3/4
5 1/2
6 1/4
6 1/2
8
11 1/4
14
17
19 3/8
20 1/4
22 3/8
24 7/8
27 1/4
32 3/4
2 5/8
3
3 3/8
3 3/4
5 1/2
6 3/8
6 3/4
8 1/8
11
13 3/4
17
20 1/4
R13
R16
R18
R20
R23
R26
R31
R37
R45
R49
R53
R57
R61
R65
R69
R73
R77
R14
R16
R18
R20
R24
R27
R31
R37
R45
R49
R53
R57
R62
R66
R70
R74
R78
R16
R18
R21
R23
R26
R28
R32
R38
R47
R51
R55
R60
* Advise pipe schedule or flange dia. of bore. Strainer ID will be appropriately sized less than bore for proper fit.
Larger sizes available.
HOW TO ORDER
1. Quantity
2. Line Size
3. Mating Flange Rating
4. Flange face type
5. Type of Strainer Required
6. Length Required
7. Material of Construction
8. Wire Mesh & Material if required
Bulletin CP112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
Basket Strainers
LINE
SIZE
2
3
4
6
8
10
12
14
16
18
20
24
30
36
STANDARD MATERIAL IS
PERFORATED 1/8 DIAMETER
HOLES ON 3/16 CENTERS
40% OPEN AREA
CARBON STEEL
TYPE BP
LENGTH L B
STD.
C LGTH. 75% 100% 150% 200% 300%
14
22
22
4
5
6
2
3
3
5
7
8
22
5
5
7
9
11
4
6
6
9
12
17
52
8
8
11
14
21
6
10
10
11
15
19
27
7
11
11
12
18
22
32
10
11
11
13
18
23
33
10
12
12
14
21
25
38
11
14
14
17
23
28
43
13
16
16
19
26
31
48
15
19
19
23
32
40
57
19
21
21
28
40
50
71
23
26
26
38
50
60
84
8 x 8 Std
TYPE BWI
Wire Cloth Inside
*Perforated Support
TYPE BWO
Wire Cloth Outside
*Perforated Support
TYPE BW
1 Ply Heavy
Wire
(Customers Choice)
Bulletin BP112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
Basket Strainers
Additional Features
ID
SIZE
150/300 lb.
RF/FF/RJ
400/600 lb.
RF/RJ
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
6
8
10
12
14
16
18
20
24
5/8
7/8
1 1/8
1 3/8
1 7/8
2 1/4
2 7/8
3 3/4
5 3/4
7 1/2
9 1/2
11 1/2
12 7/8
14 3/4
16 3/4
18 3/4
22 3/4
5/8
7/8
1 1/8
1 3/8
1 7/8
1 15/16
2 33/64
3 5/8
5 5/8
7 3/8
9 1/4
11 1/8
Advise Pipe
Schedule or
Flange Dia.
of Bore.
Strainer ID
will be 1/8
(small sizes)
to 1/2
(large sizes)
Less than
Flange Bore
2
2
2
3
1/8
1/2
7/8
1/4
4
4 5/8
5 1/4
6 3/4
8 5/8
10 3/4
13 1/8
15 7/8
17 1/2
20
21 3/8
23 5/8
28
400 lb.
RF
2
2
3
3
4
1/2
3/4
1/8
5/8
1/4
5
5 3/4
6 7/8
9 5/8
11 3/4
13 7/8
16 1/4
18 3/4
20 7/8
23 1/8
25 1/4
30
600 lb.
RF
2
2
3
3
4
1/2
3/4
1/8
5/8
1/8
5
5 3/4
7 1/2
10 1/8
12 3/8
15 1/2
17 3/4
19 1/8
22
23 7/8
26 5/8
30 7/8
900 lb.
RF
1500 lb.
RF
300/400
600 lb.
RJ
900 lb.
RJ
2 5/8
3
3 1/4
3 3/4
5 1/2
6 1/4
6 1/2
8
11 1/4
14
17
19 3/8
20 1/4
22 3/8
24 7/8
27 1/4
32 3/4
2 5/8
3
3 3/8
3 3/4
5 1/2
6 3/8
6 3/4
8 1/8
11
13 3/4
17
20 1/4
R13
R16
R18
R20
R23
R26
R31
R37
R45
R49
R53
R57
R61
R65
R69
R73
R77
R14
R16
R18
R20
R24
R27
R31
R37
R45
R49
R53
R57
R62
R66
R70
R74
R78
R16
R18
R21
R23
R26
R28
R32
R38
R47
R51
R55
R60
* Advise pipe schedule or flange dia. of bore. Strainer ID will be appropriately sized less than bore for proper fit.
Larger sizes available.
HOW TO ORDER
1. Quantity
2. Line Size
3. Mating Flange Rating
4. Flange face type
5. Type of Strainer Required
6. Length Required
7. Material of Construction
8. Wire Mesh & Material if required
Bulletin BP112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
Flat Strainers
TYPE FP
PERFORATED WITH SOLID RING
(3 and larger only)
TYPE F-PF
ALL PERFORATED
HOW TO ORDER
1.
2.
3.
4.
5.
6.
Quantity
Line Size
Weamco type
Flange Rating and Face
Perforated material
Mesh liner if required
SIZE
3/ 4
1
1 1/ 4
1 1/ 2
2
3
4
5
6
8
10
12
14
16
18
20
24
600 lb.
RF
2 1/ 2
2 3/ 4
3 1/ 8
3 5/ 8
4 1/ 4
5 3/ 4
7 1/ 2
9 3/ 8
10 3/ 8
12 1/ 2
15 5/ 8
17 7/ 8
19 1/ 4
22 1/ 8
24
26 3/ 4
31
STANDARD MATERIAL IS
PERFORATED 1/8 DIAMETER
HOLES ON 3/16 CENTERS
40% OPEN AREA
CARBON STEEL
Bulletin FP112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
Strainers
Meter Provers
Bi-Directional
Uni-Directional
Portable &
Volumetric
Mag-Tek Sphere
Detector Switches
Prover Accessories
Corrosion Coupon Holders
Line Blinds & Bleed Rings
Sampling Equipment
Toll Free 800-331-3790
Oklahoma Home Office 918-445-1141
Fax 918-445-4617 Email sales@weamco.com
www.weamco.com
Custom Fabrication
WeamcoMetric Provers
For many years WeamcoMetric has been an industry leader in the design and manufacture of
Positive Displacement Type Meter Provers. We specialize in stationary or portable Bi-Directional
Pipe Provers, Uni-Directional Pipe Provers and Volumetric Tank Provers. At WeamcoMetric you
will be working with one of the most experienced and professional staffs in the industry supported by one of the most highly skilled manufacturing forces in the business.
At our state-of-the-art facility, everything is done in house. From design and engineering
through manufacturing, testing, painting, coating and water draw calibration all are completed
on site under our personal control, assuring projects run smoothly and on schedule.
CONVENTIONAL LIQUID
METER PROVERS DESIGN
AND CONSTRUCTION
I.
II.
Page 1
Rev. 1/12
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
C) The displacer passes between two detector switches. The volume between
switches is known as the calibrated volume. This volume is compared to
the volume indicated by the meter, to determine a meter factor. The volumes are
corrected for Pressure and Temperature.
Meter Factor = Actual Volume (Prover)
Metered Volume (Meter)
IV.
Page 2
Rev. 1/12
Unidirectional - 10 ft/sec.
Bidirectional - 5 ft/sec. or higher.
Minimum:
depends on lubricating properties of the product -low velocities may cause sphere to jerk or surge
Recommend 1.0 ft/sec. min.
Page 3
Rev. 1/12
C) Pre-Run Length
A prover must have a sufficient pre-run length from the launch chamber
reducer to the first detector switch to allow the 4-way diverter valve to
cycle completely and seal properly before the displacer triggers the first
detector switch. Also allowing the displacer to reach uniform velocity.
V.
Page 4
Rev. 1/12
Page 5
Rev. 1/12
VI.
VII. Calibration
Prior to placing a prover into service, a Base Prover Volume must be
determined. This is done by a water-draw calibration as outlined in
API Chapter 4, Section 9, as previously mentioned, and calculations per
API Chapter 12, Section 2, Part 4. The calibration also verifies that all
components are sealing properly and are in working condition. In
particular the 4-Way diverter valve. The calibration is completed using
field measures, thermometers, and gauges that are traceable to NIST,
per API Chapter 4.7.
Page 6
Rev. 1/12
VIII. Summary
Conventional displacement type pipe provers are the most commonly
used and accepted method of meter proving. Care of details in design
construction, and calibration are essential to the proper functioning of
a complete measurement system.
IX.
Page 7
Please use our Prover Data Sheet for your Inquiry or Purchase Order.
This will allow us to propose a more detailed offering for your
application.
Rev. 1/12
Radiography:
100% in accordance with API 1104.
Hydrotest:
1.5 times design pressure with chart
recording.
Inspection Flanges:
Match bored, dowel pinned and O-ring
groove for metal to metal seat.
Materials:
Pipe - ASTM A-106 Gr B Seamless
(to 24 size)
API 5L-Gr B above 24" size.
Flanges and threaded fittings ASTM A-105
Weld fittings - ASTM A-234 WPB
Studs - ASTM A-193-B7
Nuts - ASTM A-194-2H
Gaskets - Spiralwound, 304SS
O-Rings - Viton or Buna-N
Calibration:
Water draw method, repeatability within
0.02 percent per API Chapter 4.9 and
Chapter 12.2.4.
Internal Coating:
Sandblast to white metal and 10 to 12
mils air dried epoxy.
External Coating:
Sandblast to white metal and one coat
zinc chromate primer.
Options:
Thermometers and SS thermowells
Pressure gauges with isolation valves
Pressure relief valve
Vent valves
Drain valves
Page 8
Rev. 1/12
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
PURCHASE
PREPARED BY
TAG NO.
DATE
LOCATION
TYPE:
BI-DIRECTIONAL
METRIC UNI-DIRECTIONAL SMALL VOLUME
BURIED
ABOVE GROUND
LAUNCH CHAMBERS TYPE (DESCRIBE)
STATIONARY
SKID MOUNTED
PORTABLE (DESCRIBE)
SERVICE:
FLUID
VISCOSITY
FLOW RATE MAX.
FLUID TEMP. MAX.
FLUID PRESSURE MAX.
SPECIFIC GRAVITY
SSU/CST@
ITEM NO.
REVISION
VOLUMETRIC
API/SPEC@
F VAPOR PRESS.
MIN.
MIN.
F
MIN.
F
PSI@
GPM / BPH
AMBIENT TEMPERATURE
PSIG
MODEL
TYPE
PULSER(S) TYPE
PRESSURE RATING
SIZE
SIZE
SIZE
TYPE
LENGTH
VALVES
VALVES
GAUGE VALVE
THERMOWELLS SIZE
TYPE
YES
NO
WITNESS
HYDROSTATIC TEST
WATER DRAW CALIBRATION
RADIOGRAPHY, 100%
SPOT
L
W
H
P.O. BOX 9555 TULSA, OKLAHOMA 74157 (918) 445-1141 TOLL FREE (800) 331-3790
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com www.weamco.com
Strainers
Meter Provers
Bi-Directional
Uni-Directional
Portable & Volumetric
Mag-Tek Sphere
Detector Switches
Prover Accessories
Corrosion Coupon Holders
Line Blinds & Bleed Rings
Sampling Equipment
Toll Free 800-331-3790
Oklahoma Home Office 918-445-1141
Fax 918-445-4617 Email sales@weamco.com
www.weamco.com
Custom Fabrication
Bi-Directional Provers
By far the most commonly used Prover in the industry for many years. The Bi-Directional
Displacement Type Pipe Prover has proven itself over and over again as one of the most reliable
means available to verify meter readings and establish meter factors. It is still the most recommended and used Prover design in the world today.
WeamcoMetric is the most trusted source in the industry for Bi-Directional Pipe Prover design
and manufacturing. With hundreds of Provers in service throughout the industry you can rest
assured you are working with the best at WeamcoMetric.
Bi-Directional Provers
Typical Prover Specifications
Design and Construction:
API Manual of Petroleum Measurement
Standards, Chapter 4.2 Proving Systems,
ASME/ANSI B31.4, ASME/ANSI B31.3.
Radiography:
100% in accordance with API 1104.
Hydrotest:
1.5 times design pressure with chart
recording.
Inspection Flanges:
Match bored, dowel pinned and O-ring
groove for metal to metal seat.
Materials:
Pipe - ASTM A-106/53-Gr B Seamless
(to 24 size) API 5L-Gr B above 24" size.
External Coating:
Sandblast to white metal and one coat
zinc chromate primer.
Vent valves
Drain valves
O-Rings - Viton
Calibration:
Water draw method, repeatability within
0.02 percent per API Chapter 4.2 and
Chapter 12.2.4.
Internal Coating:
Sandblast to white metal and 10 to 12
mils air dried epoxy.
Bulletin BDP112
Strainers
Meter Provers
Bi-Directional
Uni-Directional
Portable &
Volumetric
Mag-Tek Sphere
Detector Switches
Prover Accessories
Corrosion Coupon Holders
Line Blinds & Bleed Rings
Sampling Equipment
Toll Free 800-331-3790
Oklahoma Home Office 918-445-1141
Fax 918-445-4617 Email sales@weamco.com
www.weamco.com
Custom Fabrication
Uni-Flo Provers
DESIGNED FOR:
compact installation
lighter weight
speed of operation
ease of water-draw calibration
Prover
BBL Dia
Prover
Vol.
Normal
Flow Range
Overall
Dims (approx.)
UFM-8
100 gallons
5 wide
25 long, 9 high
UFM-10
10
160 gallons
6 wide
30 long, 10 high
UFM-12
12
200 gallons
6 wide
35 long, 12 high
DESIGN FEATURES:
Uni-Flow Provers
Typical Prover Specifications
Design and Construction:
API Manual of Petroleum Measurement
Standards, Chapter 4.2 Proving Systems,
ASME/ANSI B31.4, ASME/ANSI B31.3.
NEC Class:
Class I, Div. 1, 220/440 Volt/3 phase 50
or 60 cycle.
Radiography:
100% in accordance with API 1104.
Hydrotest:
1.5 times design pressure with chart
recording.
Inspection Flanges:
Match bored, dowel pinned and O-ring
groove for metal to metal seat.
Seal Plug:
Buna-N - Molded
Materials:
Internal Coating:
Sandblast to white metal and 10 to 12
mils air dried epoxy.
External Coating:
Sandblast to white metal and one coat
zinc chromate primer.
Drain valve
Vent valve
Skid mounted
Calibration:
Water draw method, repeatability within
0.02 percent per API Chapter 4.2 and
Chapter 12.2.4.
Bulletin UFP112
Strainers
Meter Provers
Bi-Directional
Uni-Directional
Portable & Volumetric
Mag-Tek Sphere
Detector Switches
Prover Accessories
Corrosion Coupon Holders
Line Blinds & Bleed Rings
Sampling Equipment
Toll Free 800-331-3790
Oklahoma Home Office 918-445-1141
Fax 918-445-4617 Email sales@weamco.com
www.weamco.com
Custom Fabrication
Prover Refurbishment
For years WeamcoMetric has been a leader in the ability to take used Meter Provers and
refurbish them to like-new condition at a fraction of the cost of a new Prover. In many cases
with updated technology the refurbished Prover is better than the original. Whether it is
Bi-Directional, Uni-Directional, Volumetric, Portable or stationary, WeamcoMetric can
refurbish your Prover. Refurbishment can be done to your desired specifications, or we
would gladly review your current service requirements along with your existing Prover and
make a recommendation on what we feel would best meet your needs, while staying
within your budget. Whatever your situation, you can rest assured that with WeamcoMetrics
extensive experience in manufacturing and rebuilding Meter Provers, we have a
solution for you.
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
Hydrotest:
Static water pressure
Materials:
PROVER RE-WORK
AND REFURBISHMENT
Typical items we can offer:
Disassembly and inspection to evaluate
extent of work to be performed prior to
work commencement.
Sandblast out old coating to white metal
and 10 to 12 mils air dried epoxy.
O-Rings - Viton
Trim:
Scales; brass, graduations engraved per
specification, filled with black lines for
high visibility.
Gauge glass sets; Penderty N5A with
protection rods, 5/8 diameter glass.
Thermometer and SS thermowell.
Bulletin PVP112
Prover Accessories
Sphere Pumps & Sizing Rings
Type SP-101 Sphere Pump
Sizing Rings
Custom made to your exact
requirements
24 hour shipment
Precision laser cut from 1/4 Micarta
(Advise pipe size, schedule and percent
oversize required)
Bulletin PA112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
Prover Accessories
Sphere and Pig Handling Equipment
Model LSH
Type SRT-M 12 through 18
Type SRT-L 20 and larger
Durable, heavy metal construction
Replaceable suction cups
Model LSH
Bulletin PA112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
MAG-TEK
Model M-6 Sphere Detector Switch
Pressure balanced, piston actuated
proximity switch requiring no
dynamic seals.
Safe! Reliable!
Mag-Tek!
With interlocking
element housing
design.
MAG-TEK PROVES IT
Available in SPDT or
DPDT contacts.
Available to meet NACE
or Low-Temp services.
Designs available for
above or below ground
installation.
IT WORKS!
Patent No.
US 6,789407 B1
Bulletin M6 112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
MAG-TEK
Model M-6 Sphere Detector Switch Specifications
Switch Element
CONTACT:
Environmentally Sealed
RATING:
RESPONSE TIME:
0.008 Seconds
TEMPERATURE:
-40 F to +221 F
PRESSURE RATING:
2220 PSIG
REPEATABILITY:
0.002
(Under identical operating conditions)
302 Stainless
PISTON:
416 Stainless
BODY:
303 Stainless
O-RING:
Viton
CONDUIT OPENING:
1/2 N.P.T.
PECO/SMITH
MALONEY
MAINTENANCE
MECHANICAL
KIDD
METER
ENGINEERS
For Adaptors:
Please contact our
office for the proper
dimensions sheet to
verify your application.
Bulletin M6 112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
MAG-TEK
Model M-6T Sphere Detector Switch For
Non-Lubricated and/or Dirty Service
Safe! Reliable!
Mag-Tek!
With interlocking
element housing
design.
The Model M-6T is designed with two Teflon O-Rings located in the housing. These act
as guides for the piston while preventing foreign particles such as rust to gall the piston
surface during actuation. The piston has center drilled pressure equalization ports which
stabilize operation and create a washing action throughout the switch area thus keeping
foreign particles flushed out. This unique flow/suction action keeps the piston-to-switch
area clean which is a valuable asset in non-lubricated and dirty service applications.
Class I, Division 1,
Groups C and D
Hazardous Locations.
Patent No.
US 6,789407 B1
Bulletin M6T112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
MAG-TEK
Model M-6T Sphere Detector Switch Specifications
Switch Element
CONTACT:
Environmentally Sealed
RATING:
RESPONSE TIME:
0.008 Seconds
TEMPERATURE:
-40 F to +221 F
PRESSURE RATING:
2220 PSIG
REPEATABILITY:
0.002
(Under identical operating conditions)
302 Stainless
PISTON:
416 Stainless
BODY:
303 Stainless
O-RING:
Viton
CONDUIT OPENING:
1/2 N.P.T.
PECO/SMITH
MALONEY
MAINTENANCE
MECHANICAL
KIDD
METER
ENGINEERS
For Adaptors:
Please contact our
office for the proper
dimensions sheet to
verify your application.
Bulletin M6T112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
MAG-TEK SPHERE
DETECTOR SWITCHES
MODEL M-6 MODEL M-6D
MODEL M-6T MODEL M-6TD
INSTALLATION, OPERATION &
MAINTENANCE INSTRUCTIONS
switch to malfunction. We stongly recommend the use
General Information
6.
A. Base plate is still centered over hole, and level with the pipe.
2 3/8
installed the Mag-Tek has only one moving part, the pressureOnce all above is confirmed, complete the seal welding with
Installation Instructions
wet rags or other means. Filling the prover barrel with water, if
7.
3.
4.
5.
8.
Operation
Once installed the hemispherical portion of the probe extends
into the I.D. of the pipe approximately 3/8. When the sphere
passes the switch, it forces the probe upward. This upward
movement causes the ferrous body of the piston to enter the
magnetic field of the proximity switch sensor. The result of the
Carefully center the base plate over the 7/8 diameter hole
Rev. 1/12
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
MAG-TEK SPHERE
DETECTOR SWITCHES
MODEL M-6 MODEL M-6D
MODEL M-6T MODEL M-6TD
INSTALLATION, OPERATION &
MAINTENANCE INSTRUCTIONS
Trouble Shooting
Due to the limited number of moving parts, problems with the
Mag-Tek detector switch are few. The most common problems
can be attributed to one of the following:
1.
2.
3.
4.
Rev. 1/12
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
MAG-TEK SPHERE
DETECTOR SWITCHES
MODEL M-6 MODEL M-6D
MODEL M-6T MODEL M-6TD
INSTALLATION, OPERATION &
MAINTENANCE INSTRUCTIONS
Specifications
Contact:
Classification:
Rating:
Repeatability:
Response Time:
0.008 Seconds
Temperature:
-40F to +221F
Pressure:
Weld on Base:
Carbon Steel
Spring:
Piston:
Body:
0-Ring:
Viton
Circuit 2
RED-N/C
RED-N/C
BLUE-N/O
BLUE-N/O
BLACK-COM 1
BLACK-COM
RED w/STRIPE-N/C
BLUE w/STRIPE-N/O
BLACK w/STRIPE-COM 2
GREEN-GROUND
Rev. 1/12
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
MAG-TEK SPHERE
DETECTOR SWITCHES
MODEL M-6 MODEL M-6D
MODEL M-6T MODEL M-6TD
INSTALLATION, OPERATION &
MAINTENANCE INSTRUCTIONS
PN 621
PN 675
PN 657
PN 613
PN Varies
PN 665
PN Varies
PN 655
PN Varies
PN 654
Patent No.
US 6,789407 B1
Rev. 1/12
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
MAG-TEK
Model M-5 Sphere Detector Switch
Pressure balanced, piston actuated
proximity switch requiring no
dynamic seals.
Safe! Reliable!
Mag-Tek!
With interlocking
element housing
design.
MAG-TEK PROVES IT
With Thousands in Service!
There is a reason why year after year people have
placed their trust in the MAG-TEK switch for reliable
accurate repeatability during meter prover runs.
IT WORKS!
Patent No.
US 6,789,407 B1
Bulletin M5 112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
MAG-TEK
Model M-5 Sphere Detector Switch Specifications
Switch Element
CONTACT:
Environmentally Sealed
RATING:
RESPONSE TIME:
0.008 Seconds
TEMPERATURE:
-40 F to +221 F
PRESSURE RATING:
2220 PSIG
REPEATABILITY:
0.002
(Under identical operating conditions)
302 Stainless
PISTON:
416 Stainless
BODY:
303 Stainless
O-RING:
Viton
CONDUIT OPENING:
1/2 N.P.T.
PECO/SMITH
MALONEY
MAINTENANCE
MECHANICAL
KIDD
METER
ENGINEERS
For Adaptors:
Please contact our
office for the proper
dimensions to verify
your application.
Bulletin M5 112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
MAG-TEK
Model M-5T Sphere Detector Switch For
Non-Lubricated and/or Dirty Service
Safe! Reliable!
Mag-Tek!
With interlocking
element housing
design.
The Model M-5T is designed with two Teflon O-Rings located in the housing. These act
as guides for the piston while preventing foreign particles such as rust to gall the piston
surface during actuation. The piston has center drilled pressure equalization ports which
stabilize operation and create a washing action throughout the switch area thus keeping
foreign particles flushed out. This unique flow/suction action keeps the piston-to-switch
area clean which is a valuable asset in non-lubricated and dirty service applications.
Class I, Division 1,
Groups C and D
Hazardous Locations.
Patent No.
US 6,789,407 B1
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
MAG-TEK
Model M-5T Sphere Detector Switch Specifications
Switch Element
CONTACT:
Environmentally Sealed
RATING:
RESPONSE TIME:
0.008 Seconds
TEMPERATURE:
-40 F to +221 F
PRESSURE RATING:
2220 PSIG
REPEATABILITY:
0.002
(Under identical operating conditions)
302 Stainless
PISTON:
416 Stainless
BODY:
303 Stainless
O-RING:
Viton
CONDUIT OPENING:
1/2 N.P.T.
MODERN
MAINTENANCE
MECHANICAL
KIDD
METER
ENGINEERS
For Adaptors:
Please contact our
office for the proper
dimension sheet to
verify your application.
Bulletin M5T 112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
MAG-TEK SPHERE
DETECTOR SWITCHES
MODEL M-5 MODEL M-5D
MODEL M-5T MODEL M-5TD
INSTALLATION, OPERATION &
MAINTENANCE INSTRUCTIONS
General Information
Mag-Tek features a pressure balanced, piston actuated, proximity
5.
6.
With the base plate level and square, lightly tack weld
onto the pipe. Check to be sure the base plate guide lip is
installed the Mag-Tek has only one moving part, the pressure-
Installation Instructions
7.
2.
3.
Operation
Once installed the hemispherical portion of the probe extends
into the I.D. of the pipe approximately 3/8. When the sphere
passes the switch, it forces the probe upward. This upward
movement causes the ferrous body of the piston to enter the
magnetic field of the proximity switch sensor. The result of the
attracting forces causes the magnet in the sealed switch to
move toward the ferrous piston causing the normally open
4.
Rev. 1/12
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
MAG-TEK SPHERE
DETECTOR SWITCHES
MODEL M-5 MODEL M-5D
MODEL M-5T MODEL M-5TD
INSTALLATION, OPERATION &
MAINTENANCE INSTRUCTIONS
Trouble Shooting
Due to the limited number of moving parts, problems with the
Mag-Tek detector switch are few. The most common problems
can be attributed to one of the following:
1.
2.
3.
4.
Rev. 1/12
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
MAG-TEK SPHERE
DETECTOR SWITCHES
MODEL M-5 MODEL M-5D
MODEL M-5T MODEL M-5TD
INSTALLATION, OPERATION &
MAINTENANCE INSTRUCTIONS
Specifications
Contact:
Classification:
Rating:
Repeatability:
Response Time:
0.008 Seconds
Temperature:
-40F to +221F
Pressure:
Weld on Base:
Carbon Steel
Spring:
Piston:
Body:
0-Ring:
Viton
Circuit 2
RED-N/C
RED-N/C
BLUE-N/O
BLUE-N/O
BLACK-COM 1
BLACK-COM
RED w/STRIPE-N/C
BLUE w/STRIPE-N/O
BLACK w/STRIPE-COM 2
GREEN-GROUND
Rev. 1/12
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
MAG-TEK SPHERE
DETECTOR SWITCHES
MODEL M-5 MODEL M-5D
MODEL M-5T MODEL M-5TD
INSTALLATION, OPERATION &
MAINTENANCE INSTRUCTIONS
PN 621
PN 676
PN 610
PN 613
PN Varies
PN 665
PN Varies
PN Varies
Patent No.
US 6,789407 B1
Rev. 1/12
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
The above measurements taken with shell test stand benchmark piston.
SWITCH DESCRIPTION:
1) Type of Base
2) Piston Overall Length
3) Piston Shank Length
4) Potted Conduit Length
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
The below measurements taken with shell test stand benchmark piston.
SOLID LEAD:
A. ________ Micrometer reading in inches at point of physical contact of micrometer anvil
to Mag-Tek benchmark piston tip.
B. ________ Test Stand Standard.
C. ________ Micrometer reading in inches at instant of switch contact closure.
D. ________ Face of switch flange to tip of benchmark piston at instant of switch
contact closure. (B - C) = D
STRIPPED LEADS:
A. ________ Micrometer reading in inches at point of physical contact of micrometer anvil
to Mag-Tek benchmark piston tip.
B. _________ Test Stand Standard.
C. ________ Micrometer reading in inches at instant of switch contact closure.
D. ________ Face of switch flange to tip of benchmark piston at instant of switch
contact closure. (B - C) = D
SWITCH DESCRIPTION:
Type of Base
Piston Shank Length
(918) 445-1141
(800) 331-3790
___________________ Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
Certificate of Compliance
Page 1
2006
Page 2
Page 1
Strainers
Meter Provers
Bi-Directional
Uni-Directional
Portable & Volumetric
Mag-Tek Sphere
Detector Switches
Prover Accessories
Corrosion Coupon Holders
Line Blinds & Bleed Rings
Sampling Equipment
Toll Free 800-331-3790
Oklahoma Home Office 918-445-1141
Fax 918-445-4617 Email sales@weamco.com
www.weamco.com
Custom Fabrication
Custom Fabrication
Bulletin CF112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
STANDARD MODELS
4 Jar, single inlet
API Gravity range
29 to 71
Model VTS-5
5 Jar, single inlet
API Gravity range
19 to 71
Model VTS-6
6 Jar, dual inlet
API Gravity range as specified
Model VTS-4
Options available
Multi-stream selection on inlet
NIST Traceable Thermometer
SPECIFICATIONS
Frame: Steel with Epoxy Finish
Jars: Heavy wall Pyrex
Tubing: Stainless Steel
Inlet Valves: 1/4 316 Stainless Steel
Dump Valves: 1/2 Forged Steel
Sample inlet to unit: 1/2 NPT
Drain outlet: 2 NPT
Thermometer: 12, 0 to 100 F
1 Division
Test pressure: 50 PSIG
Relief Valve Set: 25 PSI
Dimensions: 40 wide X 12 deep X
70 high. (Model VTS-4)
Bulletin VTS112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
Sample Coolers
For Process or Boiler Water Service/
Continuous or Intermittent Duty
uty
TYPE SCS
3/8 OD Tube approx. 20 length coiled 21 turns on
3 OD Single pass, countercurrent type with cooling
surface area 254 sq. inches. Coil volume 17 cu.
inches. Shell volume 199 cu. inches (0.86 gal.)
TYPE SCS
TYPE SCL
1/2 OD Tube approx. 40 length coiled 8
turns on outside coil and 11 turns on inside
coil. Single pass, countercurrent type with
cooling surface area 622 sq. inches. Coil volume 46 cu. inches. Shell volume 1300 cu.
inches (5.6 gal.)
TYPE SCL
Illustrated with removable top
for cleaning or replacing coil.
Also availble with solid welded top.
SHELL MATERIAL
Carbon Steel
Carbon Steel
Carbon Steel
304 SS
304 SS
316 SS
COIL MATERIAL
Carbon Steel
304 SS
316 SS
304 SS
316 SS
316 SS
TYPE SCL
SCL-101
SCL-102
SCL-103
SCL-201
SCL-202
SCL-301
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
Sample Containers
WeamcoMetric manufactures a complete line of rugged and
dependable
sample
containers
featuring
pressure
vessel
construction that will provide years of trouble free crude oil service.
The SB Series Sample Container features a spray bar mixer
which has been engineered and sized to provide the rolling
action necessary for a complete homogeneous mixture. Other
features include an easily cleanable sight gauge glass, Class 1,
Group D, Division 2 explosion-proof electrical system with 1/2
horsepower explosion-proof pump motor, sample ports, epoxy
coated tank, 8 quick-opening closure for observation and easy
clean out, pressure relief and vacuum break valve, 0-30 psi
gauge, pump-out valve, and bottom drain valve for complete
sample evacuation. 15 PSI Design Pressure. Safety wire tabs are
welded at all container outlets.
Model SC-SB-10V
OPTIONS AVAILABLE
Model
SC-SB-5 V OR H*
SC-SB-10 V or H*
SC-SB-15 V or H*
SC-SB-20 V or H*
SC-SB 30 V or H*
Model SC-SB-20H
Designed for offshore service
Capacity
Gallons
5
10
15
20
30
No. Sample
Ports
4
4
5
6
8
How to Order
1. Quantity
2. Model Number with H or V motor mounting.
3. Options or accessories required
Bulletin CSC112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
Spectacle Blinds
TYPE F
TYPE M
MACHINE FINISH
150#, 300#, 400#, 600#,
900# & 1500# RF
TYPE 8 M
Spectacle/figure 8 blind
Mill Finish
TYPE 8 F
Spectacle/figure 8 blind
Machine Finish
TYPE 8
Female octagonal - standard
TYPE 8
Male octagonal
HOW TO ORDER
1.
2.
3.
4.
5.
6.
7.
8.
Quantity
Line size
Flange rating
Flange facing
WeamcoMetric type
Finish
Material
For RTJ and/or high pressure blinds
advise design pressure and
temperature, or thickness required.
See back of
Bulletin for
Dimensions.
Bulletin LB112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
TYPE 2 F
Paddle Blind
Machine Finish
TYPE 4 F
Spacer Ring
Machine Finish
TYPE 4 M
Spacer Ring
Mill Finish
TYPE 2 M
Paddle Blind
Mill Finish
RAISED FACE OR FLAT FACE (IN INCHES)
150#
300#
LINE
SIZE
ID
OD
TK*
1
1 1/2
2
3
4
6
8
10
12
14
16
18
20
24
1 1/8
1 3/4
2 1/4
3 1/4
4 1/4
6 1/4
8 1/4
10 1/4
12 1/4
14
16
18
20
24
2 1/2
3 1/4
4
5 1/4
6 3/4
8 5/8
10 7/8
13 1/4
16
17 1/2
20
21 1/2
23 3/4
28 1/8
1/4
1/4
1/4
1/4
1/4
3/8
1/2
5/8
3/4
3/4
7/8
1
1 1/16
1 1/4
OD
2
3
4
5
3/4
5/8
1/4
3/4
7
9 3/4
12
14 1/8
16 1/2
19
21 1/8
23 3/8
25 5/8
30 3/8
400#
600#
900#
1500#
TK*
OD
TK*
OD
TK*
OD
TK*
OD
TK*
1/4
1/4
1/4
3/8
1/2
5/8
3/4
1
1 1/8
1 1/4
1 3/8
1 9/16
1 3/4
**
2 3/4
3 5/8
4 1/4
5 3/4
6 7/8
9 5/8
11 7/8
14
16 3/8
18 7/8
21
23 1/4
25 3/8
30 1/8
1/4
1/4
1/4
3/8
1/2
5/8
7/8
1 1/16
1 1/4
1 7/16
1 5/8
1 13/16
**
**
2 3/4
3 5/8
4 1/4
5 3/4
7 1/2
10 3/8
12 1/2
15 5/8
17 7/8
19 1/4
22 1/8
24
26 3/4
31
1/4
1/4
5/16
7/16
9/16
13/16
1 1/16
1 3/16
1 9/16
1 3/4
**
**
**
**
3
3 3/4
5 1/2
6 1/2
8
11 1/4
14
17
19 1/2
20 3/8
22 1/2
25
27 3/8
32 7/8
1/4
5/16
3/8
9/16
11/16
1
1 5/16
1 5/8
1 15/16
**
**
**
**
**
3
3 3/4
5 1/2
6 3/4
8 1/8
11
13 3/4
17
20 3/8
5/16
3/8
1/2
11/16
7/8
1 7/16
1 11/16
**
**
* NOTE: THICKNESS SHOWN ABOVE IS FOR CARBON STEEL 30 ksi MINIMUM YIELD STRENGTH
** THICKNESS NOT SHOWN IS DEPENDENT UPON TYPE OF MATERIAL SELECTED
Bulletin LB307
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
150#
300#
600#
900#
1500#
SIZE
TK*
ID
OD
TK*
ID
OD
TK*
ID
OD
TK*
ID
OD
24
1 1/4
24
28 1/8
24
30 3/8
2 7/8
23 1/2
30 1/2
23 1/2
32 3/8
4 3/8 22 5/8
26
1 1/4
26
29 7/8
2 1/8
26
32 1/4
2 7/8
25 1/2
33 1/2
3 1/2
25 1/2
34 1/8
28
1 3/8
28
32 1/8
2 1/4
28
34 3/4
3 1/8
27 1/2
35 3/8
3 3/4
27 1/2
36 5/8
30
1 1/2
30
34 1/8
2 3/8
30
36 7/8
3 3/8
29 1/2
37 5/8
4 1/8
29 1/2
39 1/8
32
1 5/8
32
36 3/8
2 1/2
32
39
3 1/2
31 1/2
39 5/8
4 3/8
31 1/2
41 5/8
34
1 3/4
34
38 3/8
2 5/8
34
41
3 3/4
33 1/2
41 5/8
4 5/8
33 1/2
44 1/8
36
1 3/4
36
40 5/8
2 7/8
36
43 3/8
35 1/2
43 7/8
4 7/8
35 1/2
46 5/8
TK*
ID
OD
34 7/8
* NOTE: THICKNESS SHOWN ABOVE IS FOR CARBON STEEL 30 ksi MINIMUM YIELD STRENGTH
NOTES
1. Weamco recommends these items be made
in two pieces (spacer ring and paddle blind)
due to their size and weight.
2. Dimensions are based on ASME B 16.47,
Series A.
3. 26 and larger 1500# are not a published
manufacturers or ASME standard.
Bulletin PBS112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
Bleed Rings
TYPE 6
Bleed Rings
RF, FF or RTJ can be furnished
O.D.
250 # FF
400 #
300 # RF
RF
SIZE
I.D.
125 # FF
150 # RF
600 #
RF
900#
RF
1500#
RF
1 1/8
2 1/2
2 3/4
2 3/4
2 3/4
1 1/4
1 3/8
2 7/8
3 1/8
3 1/8
3 1/8
3 3/8
3 3/8
1 1/2
1 3/4
3 1/4
3 5/8
3 5/8
3 5/8
3 3/4
3 3/4
2 1/4
4 1/4
4 1/4
4 1/4
5 1/2
5 1/2
2 1/2
2 5/8
4 3/4
6 3/8
6 3/8
3 1/4
5 1/4
5 3/4
5 3/4
5 3/4
6 1/2
6 3/4
4 1/4
6 3/4
6 7/8
7 1/2
8 1/2
5 1/4
7 5/8
8 3/8
8 1/4
9 3/8
9 5/8
9 7/8
6 1/4
8 5/8
9 3/4
9 5/8
10 3/8
11 1/4
11
8 1/4
10 7/8
12
11 7/8
12 1/2
14
13 3/4
10
12
10 1/4
12 1/4
13 1/4
16
14 1/8
16 1/2
14
16 3/8
15 5/8
17 7/8
17
19 1/2
17
20 3/8
HOW TO ORDER
1.
2.
3.
4.
5.
6.
7.
8.
Quantity
Line size
Flange rating
Flange facing
WeamcoMetric type
Finish
Material
For RTJ and/or high pressure rings
advise design pressure and
temperature, or thickness required.
Bulletin BR112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
DESCRIPTION
Handwheel
Handwheel Lock
Pipeline
Patent # 4,120,313
INFORMATION REQUIRED FOR ORDERING
1.
2.
3.
4.
Bulletin CH112
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
CORROSION COUPON
HOLDER
CH-100 and CH-200
III. MAINTENANCE
II. OPERATION
A. Loading Holder
the inner guide. Pull rack straight out of the top. The coupon
engages with the pinion and can be lowered into the body
C. Retrieving Coupon
Loosen locking screw and turn handwheel counter-clockwise
until it will go no further. Close 2 valve. Bleed internal
pressure from holder, then proceed to remove coupon.
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
WARRANTY
WEAMCO, Inc. hereby warrants all products against defects in materials and/or workmanship for a period of one (1) year from the date of the products installation or eighteen (18)
months from the date of the products shipment, whichever is the shorter period. Provided,
however, this warranty and guaranty is effective only for those products which are used
within the service and pressure range for which they were manufactured.
The parties consent and agree that the customers remedy for any breach by WEAMCO, Inc.
of this warranty is the replacement of any parts found by WEAMCO, Inc.s to be defective in
workmanship or material. Provided, however, in case of products or parts not wholly of
WEAMCO, Inc. manufacture or design, the remedy for any breach of this warranty contained
herein shall be limited to the extent of the recovery by WEAMCO, Inc. from the manufacturer or designer of such products or parts of its warranty to WEAMCO, Inc.
Customer hereby indemnifies and holds WEAMCO, Inc. harmless from any and all damages,
claims of damages or other losses claimed against the customer or WEAMCO, Inc. not
covered by WEAMCO, Inc.s warranty, and/or not arising out of the operation of the
product(s) covered by WEAMCO, Inc.s warranty.
Except as provided for herein, WEAMCO, Inc. makes no other warranty, either expressed
or implied, as to the merchantability or fitness for a particular purpose of the parts and
products sold by WEAMCO, Inc. to the customer.
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
Specification
Pipe
Flanges
Weld Fittings
ASTM A-105
Elliptical Heads
Spectacle Blinds
ASTM A-193-B7/A-194-2H
ASTM A-36
LACT Units
NIST 105-3
Calibration Calculation
ASME/ANSI B31.4
ASME/ANSI B31.8
Process/Plant Piping
ASME/ANSI B31.3
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com
.540
.675
.840
1.050
1.315
14
1.660
12
1.900
2.375
22
2.875
3.500
32
4.000
4.500
5.563
6.625
8.625
10
10.750
12
12.750
14
14.00
16
16.00
18
18.00
20
20.00
22
22.00
24
24.00
26
26.00
30
30.00
36
36.00
48
48.00
54
54.00
60
60.00
10
.035
.1383
.049
.2570
.049
.3276
.065
.5383
.065
.6838
.065
.8678
.065
1.107
.065
1.274
.065
1.604
.083
2.475
.083
3.029
.083
3.472
.083
3.915
.109
6.349
.109
7.585
.109
9.914
.134
15.19
.165
22.18
.049
.1383
.065
.3297
.065
.4235
.083
.6710
.083
.8572
.109
1.404
.109
1.806
.109
2.085
.109
2.638
.120
3.531
.120
4.332
.120
4.973
.120
5.613
.134
7.770
.134
9.289
.148
13.40
.165
18.70
.180
24.20
.250
36.71
.250
42.05
.250
47.39
.250
52.73
.250
58.07
.250
63.41
.312
85.60
.312
98.93
.312
118.92
20
30
40
.068
.2447
.088
.4248
.091
.5676
.109
.8510
.113
1.131
.133
1.679
.140
2.273
.145
2.718
.154
3.65
.203
5.79
.216
7.58
.226
9.11
.237
10.79
.258
14.62
.280
18.97
.277
.322
24.70 28.55
.307
.365
34.24 40.48
.330
.406
43.77 53.52
.375
.438
54.57 63.44
.375
.500
62.58 82.77
.438
.562
82.15 104.67
.500
.594
104.13 123.11
.500
114.81
.562
.688
140.68 171.29
STD
.068
.2447
.088
.4248
.091
.5676
.109
.8510
.113
1.131
.133
1.679
.140
2.273
.145
2.718
.154
3.65
.203
5.79
.216
7.58
.226
9.11
.237
10.79
.258
14.62
.280
18.97
.250
.322
22.36
28.55
.250
.365
28.04
40.48
.250
.375
33.38
49.56
.312
.375
45.61
54.57
.312
.375
52.27
62.58
.312
.375
58.94
70.59
.375
.375
78.60
78.60
.375
.375
86.61
86.61
.375
.375
94.62
94.62
.500
.375
136.17
102.63
.500
.625
.375
157.53 196.08
118.65
.500
.625
.750
.375
189.57 236.13 282.35 142.68
.375
190.7
.375
214.8
.375
238.8
60
80
XH
.406
35.64
.500
54.74
.562
73.15
.594
85.05
.656
107.50
.750
138.17
.812
166.40
.875
197.41
.969
238.35
.095
.3145
.119
.5351
.126
.7388
.147
1.088
.154
1.474
.179
2.172
.191
2.997
.200
3.631
.218
5.02
.276
7.66
.300
10.25
.318
12.50
.337
14.98
.375
20.78
.432
28.57
.500
43.39
.594
64.43
.688
88.63
.750
106.13
.844
136.61
.938
170.92
1.031
208.87
1.125
250.81
1.219
296.58
.095
.3145
.119
.5351
.126
.7388
.147
1.088
.154
1.474
.179
2.172
.191
2.997
.200
3.631
.218
5.02
.276
7.66
.300
10.25
.318
12.50
.337
14.98
.375
20.78
.432
28.57
.500
43.39
.500
54.74
.500
65.42
.500
72.09
.500
82.77
.500
93.45
.500
104.13
.500
114.81
.500
125.49
.500
136.17
.500
157.53
.500
189.57
.500
253.6
.500
285.7
.500
317.7
100 120
.188
1.309
.219
1.944
.250
2.844
.250
3.765
.281
4.859
.344
7.46
.375
10.01
.438
14.32
.594
50.95
.719
77.03
.844
107.32
.938
130.85
1.031
164.82
1.156
207.96
1.281
256.10
1.375
302.88
1.531
367.39
.438
19.00
.500
27.04
.562
36.39
.719
60.71
.844
89.29
1.000
125.49
1.094
150.79
1.219
192.43
1.375
244.14
1.500
296.37
1.625
353.61
1.812
429.39
.812
67.76
1.000
104.13
1.125
139.67
1.250
170.21
1.438
223.64
1.562
274.22
1.750
341.09
1.875
403.00
2.062
483.12
.531
22.51
.625
32.96
.719
45.35
.906
74.69
1.125
115.64
1.312
160.27
1.406
189.11
1.594
245.25
1.781
308.50
1.969
379.17
2.125
451.06
2.344
542.13
.294
1.714
.308
2.441
.358
3.659
.382
5.214
.400
6.408
.436
9.03
.552
13.69
.600
18.58
.636
22.85
.674
27.54
.750
38.55
.864
53.16
.875
72.42
(918) 445-1141
(800) 331-3790
Fax: (918) 445-4617
sales@weamco.com
www.weamco.com