Академический Документы
Профессиональный Документы
Культура Документы
Integrated Circuit
Stereo Demodulator
Description:
The NTE1489 is a silicon monolithic integrated circuit in a 16Lead DIP type package designd for use
as an FM multiplex demodulator for high class stere FM tuners. As the IC adopts a PLL (Phase Lock
Loop) system, complexity of contol is usually experienced when using conventional external coil is
eliminated and the demodulator can easily be constructed by simply controlling the external semi
fixed potentiometer. Internal circuits are composed of a stereo demodulator, a lamp driver, an input
stage preamplifier that is capable of establishing variable input signal levels, a VCO (Voltage Controlled Oscillator) constituting PLL, a phase comparator, a LPF (Low Pass Filter), a frequency divider,
and a DC amplifier. A stereomonaural automatic switching circuit, a circuit for manual switching,
VCO forced stop circuit, etc. are builtin.
Features:
D Fewer External Components. Coil is not used.
D Low Monaural Total Harmonic Distortion
D Low Stereo Total Harmonic Distortion
D High Channel Separation
D BuiltIn Output Stage Post Amplifier
D StereoMonaural Switching can be made either Automatically or Manually from Outside. The
Shock Noise at Switching is Reduced Considerably.
D StereoMonaural Switching Operation is perfectly Synchronized with the Stereo Indicator Lamp
D Monitoring of VCO Free Running Frequency can be Performed by Directly Connecting the Frequency Counter to Pin9.
D High SignaltoNoise Ratio
D Wide Maximum Input Level
Absolute Maximum Ratings: (TA = +25C unless otherwise specified)
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15V
Lamp Current, IL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75mA
Package Dissipation (TA = +70C), PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400mW
Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 to +70C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 to +125C
Recommended Operating Conditions: (TA = +25C unless otherwise specified)
Parameter
Supply Voltage
Symbol
VCC
Test Conditions
Min
Typ
Max
Unit
12
15
Electrical Characteristics: (TA = +25C, VCC = 12V, f = 1kHz, R1 = 47k, R+L = 270mV,
Pilot = 30mV unless otherwise specified)
Parameter
Symbol
Supply Current
ICC
Channel Separation
Test Conditions
Min
Typ
Max
Unit
12
20
30
mA
f = 100Hz
40
50
dB
f = 1kHz
45
55
dB
f = 10kHz
35
45
dB
13
17
dB
No Signal
Sep.
Pilot = 30mV
Voltage Gain
AV
Channel Balance
CB
1.5
1.5
dB
1.5
1.5
dB
0.02
0.1
f = 100Hz
0.02
f = 1kHz
0.02
0.1
f = 10kHz
0.12
12
20
mVrms
dB
THD
Vin = 300mV
THD
R+L = 270mV,
Pilot = 30mV
L ON
Hy.
Pilot Level
Capture Range
CR
Pilot = 30mV
SCA Rejection
1.5 3.0
35
dB
45
dB
SCA Rej.
70
dB
Vin
Monaural, THD = 1%
0.7
Vrms
SignaltoNoise Ratio
S/N
82
dB
StereoMonaural Switching
SWON Voltage
Vs
1.4
1.6
Vo
VCC
Note 1. AV is from the output level measured at the IC output terminal. AV can be set by the input
impedance R1.
Pin Connection Diagram
VCC 1
Preamp Input 2
Preamp Output 3
Postamp Bias 4
13 Loop Filter
Postamp Bias 5
12 Detector Input
Rt Ch Output 6
11 Switch Filter
Lt Ch Output 7
10 Switch Filter
GND 8
16
9
.260 (6.6) Max
.300 (7.62)
.200 (5.08)
Max
.245
(6.22)
Min
.100 (2.54)
.700 (17.7)