Академический Документы
Профессиональный Документы
Культура Документы
SET - 1
Code No: X0424
II B.Tech I Semester (R07) Regular Examinations, Nov- 2009
ELECTRICAL TECHNOLOGY
(Com.to ECE,EIE,BME,E.CON.E,ECC,ICE)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
www.andhracolleges.com
All Questions carry equal marks
3 a) Draw and explain the no load phasor diagram for a single phase transformer?
(8M)
b) A single phase transformer has 1000 turns on the primary and 200 turns on the
secondary. The no load current is 3 Amp at a pf of 0.2 lagging. Calculate the
primary current and power factor when the secondary current drawn is 280
Amp at a p.f. of 0.8 lagging. (8M)
4. a)Discuss how do you perform open circuit test and short circuit tests on a
www.andhracolleges.com
single phase transformer in the laboratory. How do you find the regulation of the
transformer? (8M)
b)In no load test of single phase transformer, the following test data was obtained:
Primary Voltage: 220V, Secondary Voltage: 110V
Primary current: 0.5 A, Power input: 30W.
Resistance of the primary winding = 0.6 ohm
Find the following:
(i) Turns ratio (ii)magnetizing component (iii) working component (iv)iron loss.
(8M)
1 of 2
SET - 1
Code No: X0424
www.andhracolleges.com
7. Explain the constructional details of shaded pole 1-ф induction motor. (16M)
www.andhracolleges.com
2 of 2
SET - 2
Code No: X0424
II B.Tech I Semester (R07) Regular Examinations, Nov- 2009
ELECTRICAL TECHNOLOGY
(Com.to ECE,EIE,BME,E.CON.E,ECC,ICE)
www.andhracolleges.com
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
www.andhracolleges.com
(i) Equivalent impedance referred to primary
(ii) Equivalent impedance referred to secondary
(iii) Total copper loss. (8M)
SET - 2
Code No: X0424
6. Derive Average E.M.F per phase and RMS E.M.F per phase of an Alternator.
Also obtain the line voltage of an alternator if it is star connected. (16M)
www.andhracolleges.com
7. (a) What are Synchros? Explain the constructional features & classification
of Synchros? (12M)
(b) What are the applications of Stepper motors? (4M)
www.andhracolleges.com
Seminar Topics - Scholarships - Admission/Entrance Exam Notifications
USA-UK-Australia-Germany-France-NewZealand Universities List
SET - 3
Code No: X0424
II B.Tech I Semester (R07) Regular Examinations, Nov- 2009
ELECTRICAL TECHNOLOGY
(Com.to ECE,EIE,BME,E.CON.E,ECC,ICE)
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
www.andhracolleges.com
All Questions carry equal marks
b)A transformer with a 10:1 ratio and rated at 50kVA, 3000/300V, 50 Hz is used
to be kept constant at 300V. (8M)
www.andhracolleges.com
(8M)
b)A4 kVA, 200/400V, 50Hz single phase transformer is supplying full load
current at 0.8 power factor. The following are the test results:
O.C. Test (LV Side) :200V, 0.8A,70W (L.V.Side)
S.C. Test (HV Side): 20V, 10A, 60W (H.V. Side)
Calculate efficiency, secondary voltage and current into primary at the above
load. (8M)
5. The power input to the rotor of a 440V, 50Hz, 3-phase, 6-pole induction motor.
is 50kW.It is observed that the rotor emf makes 120 complete cycles per minute.
Calculate
(i)Slip
(ii) Rotor speed
(iii) Rotor copper losses per phase
(iv)Mechanical power developed
(v)Rotor resistance per phase if the rotor current is 50A (16M)
1 of 2
6. A 3-phase, 10 pole alternator has 2 slots per pole per phase on its stator with 10
conductors per slot. The air gap flux is sinusoidally distributed and equals to 0.05
wb. The stator has a coil span of 1500 electrical degrees. If the alternator is
www.andhracolleges.com
running at 600 r. p. m., calculate the e. m. f generated per phase at no load. (16M)
www.andhracolleges.com
Seminar Topics - Scholarships - Admission/Entrance Exam Notifications
USA-UK-Australia-Germany-France-NewZealand Universities List
SET - 4
Code No: X0424
II B.Tech I Semester (R07) Regular Examinations, Nov- 2009
ELECTRICAL TECHNOLOGY
(Com.to ECE,EIE,BME,E.CON.E,ETM,ECC,ICE)
www.andhracolleges.com
Time: 3 hours Max Marks: 80
Answer any FIVE Questions
All Questions carry equal marks
1 a) what is a separately and self exited DC generators, Explain them with help of
neat sketches? (8M)
b) A separately exited generator when running at 1200 rpm supplies a current of
200 A at 125 V to a circuit of constant resistances .What will be the current when
speed drops to 1000 rpm if the field current is unaltered? Armature resistance is
0.04 ohms and the total voltage drop at brushes is 2 V. Ignore the change in
armature reaction. (8M)
2. a) What is the necessary of a starter for DC shunt motor? Explain the operation
principle of 3-point starter with neat diagram? (10M)
b) What are the different methods speed control of DC motor give the advantages
and disadvantages in brief. (6M)
www.andhracolleges.com
resistance and reactance ads referred to low voltage side is 0.1 and 0.5 ohms
respectively. The resistance representing core loss is 400 ohm and magnetizing
reactance is 250 ohm. A load of impedance (600+j 300Ω) is connected across the
secondary terminals.
Calculate (i) input current (ii) secondary terminal voltage and (iii) primary
power factor (8M)
4. a) What are the different losses occurring in a transformer on load? How can these
losses are determined experimentally? (8M)
b)A 200/1000V, 50Hz single phase transformer gave the following test
results:
O.C. Test (LV Side) : 200V,0.7A, 70W
S.C. Test (HV Side): 15V, 10A, 85W
Calculate the parameters of the equivalent circuit referred to the LV Side.(8M)
1 of 2
SET - 4
Code No: X0424
6. a) What is the significance of pitch factor and distribution factor? Derive the
expression for above factors. (8M)
www.andhracolleges.com
field current of 5 A was tested, and the following data were obtained: (8M)
Open circuit terminal voltage: 540 V (line-to-line).
Short Circuit current :300A
When a DC voltage of 10 V was applied to two of its terminals, a current of 25A
was measured. Find the Value of Synchronous Reactance.
www.andhracolleges.com
2of 2