Вы находитесь на странице: 1из 5

NATIONALITY -------- Filipino

NAME:--------------------- JUDY MENDOZA VILLANUEVA


DATE OF BIRTH ------ December 29, 1978
E-MAIL ADDRESS ---- edujalliv@yahoo.com
PASSPORT No
------XX0792642
Mobile No. +971553985525/+971501575898
POSITION APPLYING FOR : JOB Code #2
Or any work position commensurate to my experience
Time for joining the company: immediate
EDUCATIONAL ATTAINMENT
Bachelor of Science in Civil Engineering ----------- Saint Louis University
Bonifacio St. Baguio City
Year Graduated: March 2002
GOVERNMENT LICENSURE EXAMINATION TAKEN
-Passed the Philippine Board of Civil Engineering by Professional Regulation
Commission (PRC)
- PRC License No. 96548
- Passed the Accreditation Examination for Consultants and Contractors Materials
Engineer by Department of Public Works and Highways/Bureau of Research and
Standards
- Accreditation No. 2711
SUMMARY OF PROFESSIONAL EXPERIENCE:
A licensed Civil Engineer with over eight years experience in site supervision(SITE
ENGR. PROJ. ENGR), quality assurance(QA/QC), project control operations, concrete
plant control operations, quantity surveying(QS), materials procurement, and document
control. The large scale project I handled consists of navigation gates along sea shores,
floodgates, pumping stations buildings and machineries, offshore platforms, buildings,
road raising, asphalt overlays, polder dike, river walls, drainage systems, pipelines for
water supply, deep well drilling, soil exploration. Experienced in different type of
foundation such as concrete pile foundation, Steel pipe pile foundation, timber pile
foundation and cement treated base foundations. Experienced in laboratory testing of
materials as senior laboratory technician and application of computer software such as
Microsoft Office, Autocadd 2008.

PROFESSIONAL EXPERIENCES:
Dec. 2008-April 28, 2011:
Company: Eighth Building Contracting LLC
UNITED ARAB EMIRATES
Position: Project Engineer
Projects: Villas and Buildings
Duties and Responsibilities
- Prepare estimates of materials for villas, buildings and warehouses.
- Computes concrete, reinforcing steel bars and other materials quantities used for
Local Purchase Orders.
- Computes quantities of materials for warehouses such as I-BEAMS, C-PURLINS,
Z bars, ANGLE bars, BASE PLATES, SAG ROD, FLAT BARS, TUBE BARS,
BOLTS and other steel sections for materials procurement.
- To ensure projects are progressing as per plan and design specifications.
- Prepares shop drawing for implementation purposes using autocadd software.
- Estimating tendered drawings for project cost calculation and prepares work
schedules.
- Prepares 3D drawings for presentation to the clients for their easy visualization.
- Prepares drawings and estimates for interior designs.
- Prepare as-built drawings for submission to the consultant for approval.
- Materials procurement and check all quality and specification of materials.
- Site inspection with Government Engineer and Consultant Engineers.
Nov. 2005 Nov.2008
Company:

NISHIMATSU CONSTRUCTION COMPANY LIMITED


(General Contractor)
COMPANY PROFILE: Founded in 1937, Nishimatsu Construction Co., Ltd. has earned
recognition worldwide as one of the Japans leading general contractors. The Company is
renowned for its taking on of new challenges and for its development and introduction of
sophisticated technologies in the field of civil engineering and building construction.
With its headquarters in Tokyo, Nishimatsu has a network of 11 branches and 49 sales
office around the Japan, as well as overseas offices in 13 countries. The company is wellknown for its expertise in planning, design and construction in a wide variety of fields
such as marine and harbor projects, airport projects, dam, tunnels, railways, high-rise
buildings and power plants. Nishimatsu has an impressive record of contributions to
social and economic development in Asia. In addition to a continuing presence in several
Asian countries, the Company is currently involved in large-scale projects in Europe.
Providing high-quality, timely and environmentally-friendly services at all stages of its
various projects, Nishimatsu continues working to meet the demands of its clients and
advance the frontiers of construction technology.
Consultant :
CTI Engineering Co. Ltd.
Sub-Contractor: D.M. Consunji, Inc./Ebarra Corp./EEI/KURIMOTO
Position:

SITE ENGINEER (Nov.2005-March2007)

DUTIES AND RESPONSIBILITIES


- To review and familiarize on the approved drawing for proper implementation
and ensure projects are progressing as per plan and design specifications.
MATERIALS ENGINEER- HEAD QA/QC DIVISION
(April2007-Nov2008)
QUANTITY SURVEYOR- STEEL and MECHANICAL ITEMS
Project:
Project Cost:

KAMANAVA Area Flood Control and Drainage System


Improvement Project
Php 4 BILLION PHILIPPINE PESO

Duties and Responsibilities (QUANTITY SURVEYOR)


- To fully aquaint on the quantities stated on the BILL OF QUANTITIES.
- To prepare STATEMENT OF WORKS ACCOMPLISHED in monthly basis.
- To compute quantities for MECHANICAL and STEEL items for Project Progress
Report.
- To check sub-contractors quantities especially on Steel items to prevent overrun
of quantities.
- To monitor the quantities stated in the Bill Of Quantities to give assurance that the
work done will be as per or nearly equal to the scheduled timeframe of work and
its programmed materials.
Duties and Responsibilities (Materials Engineer):
- To conduct inspection of CONCRETE PLANTS, STEEL
MANUFACTURING PLANTS, QUARRIES and other materials supplier to
give assurance that the quantity needed will be supplied continuously.
- To ascertain that all materials incorporated into the work pass the standards
specification requirements and to strictly comply with the schedule of
Minimum Testing Requirements to meet the proper quantities of materials to
be used in a certain items of works.
- To advice the Project Engineer on the acceptance or rejection of construction
materials intended for the use in the project, based on test result and
recommend remedial measures for the correction of satisfactory condition of
materials.
- To fully acquaint with the standards procedures of sampling, testing and
quality control of materials.
- To conduct soil investigations and materials survey for probable sources of
materials, and reporting the approximate quantity available, suitability of
materials and other pertinent data.
- To see that the field laboratory is adequately equipped, free from foreign
matters that tend to destroy the sensitivity of laboratory equipment and to see
that all weighing devices and testing machines are maintained and calibrated
in accordance with the Standards Specification.
- To keep a record / logbook of his daily activities ready for inspection anytime.

To submit within required time frame test reports and other pertinent papers
and to develop a system of filing pertinent reports on testing and quality
control ready at anytime for appraisal, inspection or quality assurance audit.
- To provide necessary documents needed by Quantity Surveyors for any claims
in the billing.
- Prepares Monthly Materials Status Reports and Summary of Test Reports.
January 2005 October 2005
Company:

BHAL Construction

Position:
Project:

PROJECT ENGINEER
Five-storey Building
Four-storey Commercial Building
Residential Buildings

Duties and Responsibilities:


Responsible in handling the whole project for the assurance that all activities are
constructed in accordance with prescribed plans and specifications to a given time frame.
Resolve problems encountered in the implementation of the project. Ensure that materials
and workmanship are at all times in accordance to the approved plans.
Dec. 2003 July 2004
Company: J.V. Angeles Construction Corporation
Consultant: Overseas Project Corporation of Victoria (OPCV), Australia
Position:
SITE ENGINEER
Project: Rehabilitation and Expansion of Baguio Water Supply Project
Duties and Responsibilities:
Responsible in supervising all site activities and ensure that all works are progressing as
per scheduled timeframe. Monitor all activities are proceeding as per requirements.
June 2003 December 2003
Company :

Z.R. Signey Construction

Position :
PROJECT SUPERVISOR
Project :
Commercial and Residential Buildings
Duties and Responsibilities:
Responsible in supervising activities to ensure if the plan is implemented as per designs
and specifications. Monitor all labor and equipment to ensure that all tasks are proceeding
in a manner which achieve its purpose.
January 2003 April 2003
Company :
Position :

As Geotechnical and Materials Testing Laboratory


SENIOR LABORATORY TECHNICIAN

Duties and Responsibilities:


Conduct testing of samples submitted by the clients. Prepare laboratory test reports.
Conduct on-site testing. To keep a record / logbook of daily test report, sample card for
the assurance that all materials are tested in scheduled time.
July 2002 December 2002
Company : Z.R.Signey Construction
Position : ENGINEERING ASSISTANT
Duties and Responsibilities
- To assist the senior engineer in all necessary scheduled activities.
- Record daily activities and accomplishment reports.
April 2002 June 2002
Company: As Geotechnical and Materials Testing Laboratory
Position :
LABORATORY TECHNICIAN
Duties and Responsibilities
- Conduct testing of samples submitted by the clients.
- Conduct field testing
- Prepares materials test reports.
SEMINARS AND TRAININGS ATTENDED
Analysis and Design of Buildings and Bridges
February 2001
Baguio City, Philippines
Quality Management System Awareness ISO 9001 2000
Environmental Management System ISO 14001 2004
January 24, 2006
Manila, Philippines
Fire Safety and Use of Portable Fire Extinguisher
June 24, 2006
Manila, Philippines
COMPUTER SKILLS
Microsoft Office, Autocadd 2008
Basic knowledge in 3dsmax, 3DHome Architect
LANGUAGE SKILLS
English, Urdu,Basic Arabic, Tagalog, Pangasinense, Ilocano
OTHER SKILLS
Manual drafting for perspective views and arts drafting
VALID DRIVERS LICENSE
Philippines
UAE DRIVING LICENSE- FOR FINAL DRIVE TEST

Вам также может понравиться