Академический Документы
Профессиональный Документы
Культура Документы
ELECTRONIC THERMOSTATS 28
MECHANICAL THERMOSTATS 36
ACCESSORIES 40
CLIMATE CONTROL TIME MANAGEMENT GAS AND SAFETY MEASUREMENT HEAT REGULATION INSULATORS AND
AND CONTROL BUSBAR SUPPORTS
Digital programmable thermostats DAFNE
Flush-mounting weekly programmable thermostat compact and extractable, suitable for the cover plates 1 Installation in three-module in-built box
of the main residential series, available with a height of 35 mm and 45 mm. 2 Support adjustable to main residential series
3 Body of the programmable thermostat extractable from the
support for easier programming
4 Inputs for additional probe (display only) and for phone dialler
1 2 3 4 5 Weekly programming with three temperature values
controllable during the day
6 Interchangeable front panel in three colours: anthracite grey
and white (included), silver (available as accessory)
7 Three different programming possibilities:
- Preset
- Personalised
- Manual
8 Power supplied with AAA type 1.5 V battery
9 Guaranteed comfort and consumption control in both winter
(heating) and summer (air conditioning)
10 Wide backlit display to view operating status, time and day,
10 5 temperature inside and outside the environment
6
9
7
8
10
Dimensions (mm) CONNECTION DIAGRAM
45
65 40 14
CLIMATE CONTROL
TECHNICAL INFORMATION
GENERAL CHARACTERISTICS
Battery power supply V DC 1 x 1.5 V (AAA) Temperature regulation range:
Battery life months 12 Automatic °C +2 ÷ +37.7
Charge reserve min. 2 Manual °C +2 ÷ +37.7
Fastened 503 box Antifreeze °C +2 ÷ +15
Relay capacity 250 V AC output A 8 Gap between two temperature measurements s 60
Programming Weekly Regulation type ON-OFF or proportional
Summer / winter operation YES Temperature resolution °C 0.1
Temperature settings 4 Differential °C 0.3
Internal probe temperature measurement °C 0 ÷ +37.7 Protection IP 40
External probe temperature measurement °C -40 ÷ +60 Operating temperature °C 0 ÷ +50
Storage temperature °C -10 ÷ +65
Daily resolution h 1
REFERENCE STANDARDS
Compliance with Community Directives: 73/23/EEC mod. from 93/68/EEC (Low Voltage) 89/336/EEC mod. from 92/31/EEC and 93/68/EEC (E.M.C.)
is declared with reference to the following standards: • Safety: EN 60730-2-7 / EN 60730-2-9 • E.M. Compatibility: EN 55014-2 / EN 55014-1
11
CLIMATE CONTROL TIME MANAGEMENT GAS AND SAFETY MEASUREMENT HEAT REGULATION INSULATORS AND
AND CONTROL BUSBAR SUPPORTS
Digital programmable thermostats ATHENA
Wall-mounting weekly programmable thermostat for electronic environment temperature regulation 1 Wall-mounting installation or in-built three-module
with multizone management and possibility of radio frequency control. box installation
2 Location of the radio frequency plug-in module
3 Weekly programming with four temperature values
controllable during the day
1 2 3 4 4 Time programming with 30 min. resolution
5 Three different programming modes for each zone:
- Preset
- Personalised
- Manual
6 Telephone activator input for remote management
7 Input for external temperature probe connection
(to use also for regulation purposes)
8 Serial input for the bus of connection with the programmable
11 temperature probes and the remote actuator
5 9 Power supplied by 2 AAA type 1.5 V alkaline batteries
10 10 Guaranteed comfort and consumption control in both winter
(heating) and summer (air conditioning)
9 11 Wide display to view operating status, date, temperature
of the 4 zones and outside temperature
8
7 6
12
Dimensions (mm) CONNECTION DIAGRAM
140.5 29
138.5
141
CLIMATE CONTROL
TECHNICAL INFORMATION
GENERAL CHARACTERISTICS
Battery power supply V DC 2 x 1.5 V (AAA) Temperature regulation range:
Battery life months 12 Automatic °C +2 ÷ +35
Charge reserve min. 2 Manual °C +2 ÷ +35
Fastened Wall / 503 box Antifreeze °C +2 ÷ +35
Relay capacity 250 V AC output A 8 Gap between two temperature measurements s 30
Programming Weekly Regulation type ON-OFF or proportional
Summer / winter operation YES Temperature resolution °C 0.1
Temperature settings 5 Differential °C 0.1 ÷ 1
Internal probe temperature measurement °C 0 ÷ +40 Protection IP 40
External probe temperature measurement °C -40 ÷ +60 Operating temperature °C 0 ÷ +50
Storage temperature °C -10 ÷ +65
Daily resolution 30 min.
REFERENCE STANDARDS
Compliance with Community Directives: 73/23/EEC mod. from 93/68/EEC (Low Voltage) 89/336/EEC mod. from 92/31/EEC and 93/68/EEC (E.M.C.)
is declared with reference to the following standards: • Safety: EN 60730-2-7 / EN 60730-2-9 • E.M. Compatibility: EN 55014-2 / EN 55014-1
13
CLIMATE CONTROL TIME MANAGEMENT GAS AND SAFETY MEASUREMENT HEAT REGULATION INSULATORS AND
AND CONTROL BUSBAR SUPPORTS
Digital programmable thermostats HIPNOS
Wall-mounting daily programmable thermostat. Temperature programming for each hour of the day by 1 Wide display showing time, temperature and operating status
means of practical cursors, reaching as many as 15 different temperature levels. 2 Two different operating possibilities: automatic or manual,
Handy and smart, it easily fits domestic environments. selectable with a button
3 Temperature regulation knob in manual operation
4 It can be fastened directly to the wall or on a 503 type box
or similar box
5 24 temperature programming cursors: one cursor
for each hour of the day, to choose from
6 Guaranteed comfort and consumption control in both
1 2 3 winter (heating) and summer (air conditioning)
7 Perfect balance between technology, design and ease of use
7 4
14
Dimensions (mm) CONNECTION DIAGRAM
145 33.5
93.5
CLIMATE CONTROL
TECHNICAL INFORMATION
GENERAL CHARACTERISTICS
Battery power supply V DC 2 x 1.5 V (AA) Temperature regulation range:
Battery life months 24 Automatic heat. (cond.) °C +6 (+18) ÷ +24 (+36)
Charge reserve min. 1 Manual heat. (cond.) °C +6 (+18) ÷ +26 (+38)
Fastened Wall / 503 box Antifreeze °C +1 ÷ +10
Relay capacity 250 V AC output A 8 Gap between two temperature measurements s 60
Programming Daily Regulation type ON-OFF or propor.
Summer / winter operation YES Temperature resolution °C 0.1
Temperature settings 15 Differential °C 0.1 ÷ 1
Internal probe temperature measurement °C 0 ÷ +50 Protection IP XXD
Operating temperature °C 0 ÷ +50
Storage temperature °C -10 ÷ +65
Daily resolution h 1
REFERENCE STANDARDS
Compliance with Community Directives: 73/23/CEE mod. from 93/68/CEE (Low Voltage) 89/336/CEE mod. from 92/31/CEE and 93/68/CEE (E.M.C.)
is declared with reference to the following standards: • Safety: EN 60730-2-7 / EN 60730-2-9 • E.M. Compatibility: EN 61000-6-1 / EN 61000-6-3
15
CLIMATE CONTROL TIME MANAGEMENT GAS AND SAFETY MEASUREMENT HEAT REGULATION INSULATORS AND
AND CONTROL BUSBAR SUPPORTS
Digital programmable thermostats DEDALO
Wall-mounting daily programmable thermostat. It features a modern and linear design, with the trippers 1 The display shows time or temperature and operating status
conveying it a minimalist look while further facilitating its use. 2 Two different operating possibilities: automatic or manual,
selectable with a button
3 Handy temperature regulation buttons in manual operation
4 It can be fastened directly to the wall or on a 503 type box
or similar box
5 Guaranteed comfort and consumption control in both winter
(heating) and summer (air conditioning)
6 Two simple knobs to set the daytime and night time temperature
1 2 7 24 temperature programming trippers: daytime or night time
6
5
16
Dimensions (mm) CONNECTION DIAGRAM
135 33.5
93.5
CLIMATE CONTROL
TECHNICAL INFORMATION
GENERAL CHARACTERISTICS
Battery power supply V DC 2 x 1.5 V (AA) Temperature regulation range:
Battery life months 24 Automatic °C +10 ÷ +35
Charge reserve min. 2 Manual °C +10 ÷ +35
Fastened Wall / 503 box Antifreeze °C +2 ÷ +10
Relay capacity 250 V AC output A 8 Gap between two temperature measurements s 60
Programming Daily Regulation type ON-OFF
Summer / winter operation YES Temperature resolution °C 0.1
Temperature settings 2 Differential °C 0.1 ÷ 1
Internal probe temperature measurement °C 0 ÷ +40 Protection IP XXD
Operating temperature °C 0 ÷ +50
Storage temperature °C -10 ÷ +65
Daily resolution h min. 1/2 max. 5
REFERENCE STANDARDS
Compliance with Community Directives: 73/23/CEE mod. from 93/68/CEE (Low Voltage) 89/336/CEE mod. from 92/31/CEE and 93/68/CEE (E.M.C.)
is declared with reference to the following standards: • Safety: EN 60730-2-7 / EN 60730-2-9 • E.M. Compatibility: EN 61000-6-1 / EN 61000-6-3
17
CLIMATE CONTROL TIME MANAGEMENT GAS AND SAFETY MEASUREMENT HEAT REGULATION INSULATORS AND
AND CONTROL BUSBAR SUPPORTS
Digital programmable thermostats EVO.X
Series of wall-mounting programmable thermostats managing your comfort over time in terms 1 Wall-mounting or fastening on a 503 type box or similar box
of temperature to air condition domestic environments. 2 Telephone activator input for remote management via “Phone dial”
3 Manual operation activation
4 Antifreeze temperature
5 Three programming values controllable during the day
1 2 3 and/or days of the week
6 Input for display probe connection for the external
temperature probe connection
7 Three different programming possibilities:
- Preset
- Personalised
- Manual
8 Cover available in 3 colours
9 Guaranteed comfort and consumption control in both
winter (heating) and summer (air conditioning)
10 Wide display showing operating status, time, day and internal
and external temperature
10 4
5
9 6
8 7
WALL-MOUNTING WEEKLY
PROGRAMMABLE THERMOSTATS
• 4 temperature settings:
- Antifreeze temperature
- Energy saving temperature
- Comfort temperature
- Manual operation temperature
• Preset programming:
7 temperature regulation programs
• Summer/winter operation
• Extension program
• Count-down program
• Range setting: minimum 1 hour
• ON-OFF and proportional type temperature regulation
• Bistable relay output with 8 A change-over contact (250 V AC)
• Power supply: three 1.5 V batteries (type AAA)
• Flat battery indicator
18
Dimensions (mm) CONNECTION DIAGRAM
23 86
123 88
CLIMATE CONTROL
TECHNICAL INFORMATION
GENERAL CHARACTERISTICS
Battery power supply V DC 3 x 1.5 V (AAA) Temperature regulation range:
Battery life months 12 Automatic °C +2 ÷ +37.7
Charge reserve min. 2 Manual °C +2 ÷ +37.7
Fastened Wall / 503 box Antifreeze °C +2 ÷ +15
Relay capacity 250 V AC output A 8 Gap between two temperature measurements s 60
Programming Weekly Regulation type ON-OFF or proportional
Summer / winter operation YES Temperature resolution °C 0.1
Temperature settings 4 Differential °C 0.3
Internal probe temperature measurement °C 0 ÷ +37.7 Protection IP 40
External probe temperature measurement °C -40 ÷ +60 Operating temperature °C 0 ÷ +50
Storage temperature °C -10 ÷ +65
Daily resolution h 1
REFERENCE STANDARDS
Compliance with Community Directives: 73/23/EEC mod. from 93/68/EEC (Low Voltage) 89/336/EEC mod. from 92/31/EEC and 93/68/EEC (E.M.C.)
is declared with reference to the following standards: • Safety: EN 60730-2-7 / EN 60730-2-9 • E.M. Compatibility: EN 55014-2 / EN 55014-1
19
CLIMATE CONTROL TIME MANAGEMENT GAS AND SAFETY MEASUREMENT HEAT REGULATION INSULATORS AND
AND CONTROL BUSBAR SUPPORTS
Digital programmable thermostats ECO.X
Wall-mounting programmable thermostats for easy programming and a simple display of the operating 1 The wide round display shows the programming of day,
status. Available in daily or weekly version. operating status, ambient temperature, time and day
of the week (weekly version)
2 Possible language selection to display the day of the week
3 Two temperature values controllable via knob selectors,
1 2 3 during the day and/or days of the week
4 Two different operating possibilities:
- Automatic
- Manual
5 Available in two versions:
- Daily
- Weekly
6 Design featuring soft lines
4 7 It can be fastened directly to the wall or on a 503 type box
or similar box
7
5
20
Dimensions (mm) CONNECTION DIAGRAM
91
91
29
115 104
CLIMATE CONTROL
TECHNICAL INFORMATION
GENERAL CHARACTERISTICS
Battery power supply V DC 2 x 1.5 V (AAA) Temperature regulation range:
Battery life months 12 Automatic °C +2 ÷ +30
Charge reserve min. 2 Manual °C +2 ÷ +30
Fastened Wall / 503 box Gap between two temperature measurements s 60
Relay capacity 250 V AC output A 8 Regulation type ON-OFF
Programming Daily, weekly Temperature resolution °C 0.1
Summer / winter operation NO Differential °C 0.3
Temperature settings 3 Protection IP 40
Internal probe temperature measurement °C 0 ÷ +40 Operating temperature °C 0 ÷ +50
External probe temperature measurement °C - Storage temperature °C -10 ÷ +65
Daily resolution h 1
REFERENCE STANDARDS
Compliance with Community Directives: 73/23/EEC mod. from 93/68/EEC (Low Voltage) 89/336/EEC mod. from 92/31/EEC and 93/68/EEC (E.M.C.)
is declared with reference to the following standards: • Safety: EN 60730-2-7 / EN 60730-2-9 • E.M. Compatibility: EN 55014-2 / EN 55014-1
21
CLIMATE CONTROL TIME MANAGEMENT GAS AND SAFETY MEASUREMENT HEAT REGULATION INSULATORS AND
AND CONTROL BUSBAR SUPPORTS
Digital programmable thermostats EVO.DIN
4 DIN modules modular programmable thermostat suitable for panel installation. Programming is weekly 1 230 V AC power supply with 4 hour charge reserve
and the temperature is regulated using the remote probe with wall-mounting installation. 2 Temperature remote probe for programmable thermostat
Evo.Din: wall fastened
3 Fastening on rail/omega/DIN
4 Automatic (with the setting of comfort, energy saving
1 2 3 and antifreeze temperatures), manual and off operation
5 Command input for remote control via activator
6 Input for the remote regulation probe
7 Guaranteed comfort and consumption control in both
winter (heating) and summer (air conditioning)
8 Wide backlit display showing operating status, time,
day and temperature detected by the probe
8 4
7
5
6
22
Dimensions (mm) CONNECTION DIAGRAM
70 60
87.3
CLIMATE CONTROL
TECHNICAL INFORMATION
GENERAL CHARACTERISTICS
Network power supply V AC 230 Winter regulation range:
Frequency Hz 50 / 60 Automatic °C +2 ÷ +37.7
Power consumption VA 2.5 Manual °C +2 ÷ +37.7
Fastened DIN rail Antifreeze °C +2 ÷ +15
Relay capacity 250 V AC output A 8 Gap between two temperature measurements s 15
Programming Weekly Regulation type ON-OFF or proportional
Summer / winter operation YES Temperature resolution °C 0.1
Temperature settings °C 2 Differential °C 0.3
Temperature measurement °C 0 ÷ +37.7 Protection IP 20 (41 after installation)
Max. distance of the probe from the EVO.DIN m 40 Operating temperature °C 0 ÷ +50
Storage temperature °C -10 ÷ +65
Daily resolution h 1
REFERENCE STANDARDS
Compliance with Community Directives: 73/23/CEE mod. from 93/68/CEE (Low Voltage) 89/336/CEE mod. from 92/31/CEE and 93/68/CEE (E.M.C.)
is declared with reference to the following standards: • E.M. Compatibility: EN 61000-6-1 / EN 61000-6-3 • Safety: EN 60730-2-7 / EN 60730-2-9
23
CLIMATE CONTROL TIME MANAGEMENT GAS AND SAFETY MEASUREMENT HEAT REGULATION INSULATORS AND
AND CONTROL BUSBAR SUPPORTS
Digital programmable thermostats CRONO.X
Wall-mounting programmable thermostat for weekly programming with 3 temperature level settings 1 Wide display showing operating status, time, day and internal
for each hour of the day in automatic mode and with antifreeze temperature setting and external temperature
2 Visual keypad to activate and set the manual operation
3 Side button to open the cover
4 Plastic base for wall-mounting installation
1 2 3 or on a 503 type box or similar box
5 Keypad hidden under the cover to set the automatic
programming of the temperatures
5 4
24
Dimensions (mm) CONNECTION DIAGRAM
123.0 33.5
93.5
CLIMATE CONTROL
TECHNICAL INFORMATION
GENERAL CHARACTERISTICS
Battery power supply V DC 2 x 1.5 V (AA - LR06) Temperature regulation range:
Battery life months 24 Winter °C +2 ÷ +35
Relay capacity 250 V AC output A 8 (resistive load) Summer °C +10 ÷ +35
Temperature settings 3 Antifreeze °C +1 ÷ +10
Accuracy °C ± 0.5 Time activation delay min. 15, 30, 45
Differential setting °C 0.1 ÷ 1 (ON-OFF regulation) Automatic operation settings 1 ÷ 99 hours / 1 ÷ 99 days
Temperature measurement range °C 0 ÷ +50 Switched off operation settings 1 ÷ 99 hours / 1 ÷ 99 days
Measurement resolution °C 0.1 Manual operation settings 1 ÷ 99 hours / 1 ÷ 99 days
Operating conditions °C 0 ÷ +50
Relative humidity 20 ÷ 90% noncondensing
Storage conditions °C -10 ÷ +65
Programming resolution h 1
Degree of protection IP XXD
REFERENCE STANDARDS
Compliance with Community Directives: 2006/95 CE (Low Voltage) 89/336/CEE mod. from 92/31/CEE and 93/68/CEE (E.M.C.)
is declared with reference to the following standards: • E.M. Compatibility: EN 61000-6-1 / EN 61000-6-3 • Safety: EN 60730-2-7 / EN 60730-2-9
25
CLIMATE CONTROL TIME MANAGEMENT GAS AND SAFETY MEASUREMENT HEAT REGULATION INSULATORS AND
AND CONTROL BUSBAR SUPPORTS
Digital programmable thermostats ECO
Wall-mounting programmable thermostat for extremely simple programming with 2 levels 1 Wide display showing operating status, time,
of temperature settings for each hour of the day in automatic mode. day and temperature
Available in 2 versions: weekly and daily. 2 Big knobs to set the daytime temperature
and night time temperature
3 Side button to open the cover
1 2 3 4 Plastic base for wall-mounting installation or
on a 503 type box or similar box
5 Keypad hidden under the cover to set the automatic
programming of the temperatures
5 4
26
Dimensions (mm) CONNECTION DIAGRAM
123.0 33.5
93.5
CLIMATE CONTROL
TECHNICAL INFORMATION
GENERAL CHARACTERISTICS
Battery power supply V DC 2x1.5 (AA type - LR06) alkaline Regulation temperature setting °C +2 ÷ +30
Battery life months 12 Operating temperature °C +0 ÷ +50
Relay capacity 250 V AC output A 8 (resistive load) Relative humidity 20 ÷ 90% noncondensing
Temperature settings 2 Storage conditions °C -10 ÷ +65
Accuracy °C ± 0.5 Programming resolution h 1
Fixed differential °C 0.3 Degree of protection IP XXD
Temperature measurement range °C 0 ÷ +40 Charge reserve min. 2
Measurement resolution °C 0.1
REFERENCE STANDARDS
Compliance with Community Directives: 2006/95 CE (Low Voltage) 89/336/CEE mod. from 92/31/CEE and 93/68/CEE (E.M.C.)
is declared with reference to the following standards: • E.M. Compatibility: EN 61000-6-1 / EN 61000-6-3 • Safety: EN 60730-2-7 / EN 60730-2-9
27
CLIMATE CONTROL TIME MANAGEMENT GAS AND SAFETY MEASUREMENT HEAT REGULATION INSULATORS AND
AND CONTROL BUSBAR SUPPORTS
Electronic thermostats EOS
Semi flush-mounting electronic thermostat for 503 type box or similar box. Available in three versions: 1 Selector to choose the operation (for EOS DN and Eos SW)
basic, with selector for summer/winter operation, with selector for daytime/night time operation. 2 Light to indicate load connection (system on)
3 Plastic base already included for possible wall mounting
4 Knob to set the regulation of the temperature
1 2
3
4
28
Dimensions (mm) CONNECTION DIAGRAM
32.4 15.5
CLIMATE CONTROL
TECHNICAL INFORMATION
GENERAL CHARACTERISTICS
Power supply V AC 230 (-10% ÷ + 10%) Night temperature reduction °C 3.0
Frequency Hz 50 / 60 Operating conditions °C 0 ÷ +50
Relay capacity 250 V AC output A 8 (resistive load) Relative humidity 20 ÷ 90% noncondensing
Accuracy °C ± 0.5 Storage temperature °C -10 ÷ +65
Fixed differential °C 1 Degree of protection IP XXD
Regulation temperature setting °C +5 ÷ +30
REFERENCE STANDARDS
Compliance with Community Directives: 2006/95/CE (Low Voltage) 89/336/CEE mod. from 92/31/CEE and 93/68/CEE ( E.M.C.)
is declared with reference to the following standards: • Safety: EN 60730-2-9 • Compatibility: E.M.: EN 61000-6-1 / EN 61000-6-3
29
CLIMATE CONTROL TIME MANAGEMENT GAS AND SAFETY MEASUREMENT HEAT REGULATION INSULATORS AND
AND CONTROL BUSBAR SUPPORTS
Electronic thermostats KEO
Flush-mounting thermostat, compact and extractable, suitable for the cover plates of the main residential 1 Installation in three-module in-built box
series, available with a height of 35 mm and 45 mm. 2 LED signalling the presence of voltage (Keo-A)
or battery test (Keo-B)
3 LED relay status
4 Interchangeable front panel in three colours: anthracite
1 2 3 grey and white (included), silver (available as accessory)
5 Guaranteed comfort and consumption control in both winter
(heating) and summer (air conditioning)
6 230 V power supply for the Keo-A model or with a AAA
type 1.5 V battery for the Keo-B model
7 Support adjustable to main residential series
5
4
FLUSH-MOUNTING THERMOSTAT
• Three operating modes: summer, winter, night time
(reduction of 3°C on the setting)
Suitable for the following residential series:
• Regulation range:
- in the SUMMER/WINTER mode: +5°C ÷ +30°C - Bticino series Living International, - Legrand series Cross
- in the NIGHT mode: +2°C ÷ +27°C - Bticino series Living Classic, - Legrand series Vela Quadra
• Intervention differential for Keo-A: - Bticino series Light - Legrand series Vela Tonda
- fixed at 0.3 °C with ON/OFF type regulation - Bticino series Light tech - Ave series Blanc 45
- proportional with differential of 0.8 °C and time base 8 minutes - Bticino series Magic - Ave series Ral 45
- proportional with differential of 1.5 °C and time base 15 minutes - Bticino series Matix - Ave series Zama 45
• Intervention differential for Keo-B: fixed at 0.5 °C with ON/OFF regulation type - Bticino series Axolute - Ave series Banquise
• Bistable relay output with 8 A change-over contact (250 V AC) (through AXO accessory - Gewiss series Playbus
to be bought separately) - Siemens series Delta Futura
- Vimar series Idea - Siemens series Delta Geo
- Vimar series Plana
- Vimar series Eikon
30
Dimensions (mm) CONNECTION DIAGRAM
KEO-A
45
KEO-B
65 40 14
CLIMATE CONTROL
TECHNICAL INFORMATION
GENERAL CHARACTERISTICS
Model KEO-A Model KEO-B
Sensor NTC Sensor NTC
Network power supply V AC 230 Battery power supply V DC 1 x 1.5 V (AAA)
Frequency Hz 50 / 60 Battery life months 12
Fastened Flush-mounting Fastened Flush-mounting
Relay capacity 250 V AC output A 8 (5) Relay capacity 250 V AC output A 8 (5)
Regulation range °C +5 ÷ +30 Regulation range °C +5 ÷ +30
Differential °C 0.3 Differential °C 0.5
Protection IP 40 Protection IP 40
REFERENCE STANDARDS
Compliance with Community Directives:73/23/CEE mod. from 93/68/CEE (Low Voltage) 89/336/CEE mod. from 92/31/CEE and 93/68/CEE (E.M.C.)
is declared with reference to the following standards: • Safety: EN 60730-2-9 • E.M. Compatibility: EN 61000-6-1 / EN 61000-6-3
31
CLIMATE CONTROL TIME MANAGEMENT GAS AND SAFETY MEASUREMENT HEAT REGULATION INSULATORS AND
AND CONTROL BUSBAR SUPPORTS
Electronic thermostats KLIO
Wall-mounting thermostat for the electronic regulation of the ambient temperature 1 Wall-mounting installation or in-built three-module
that can be horizontally or vertically installed and radio frequency controlled. box installation
2 Location of the radio frequency plug-in module
3 Telephone activator input for remote management
4 Possibility of reducing the timed temperature
1 2 3 5 Power supplied by 2 AAA type 1.5 V alkaline batteries
6 Guaranteed comfort and consumption control in both winter
(heating) and summer (air conditioning)
7 Wide display to view operating status,
and the ambient temperature
4
6
5
WALL-MOUNTING THERMOSTAT
• Three operating modes: summer, winter, night time
• Viewed on the LCD display
• Regulation range: +2°C ÷ +35°C
• Intervention differential setting from 0.1 to 1°C
• ON/OFF type temperature regulation
• Bistable relay output with 8 A change-over contact (250 V AC)
• Flat battery indicator
• Base can be installed on a wall both vertically and horizontally
• Possibility of commanding a remote actuator via wireless network
• Input for phone dialler
32
Dimensions (mm) CONNECTION DIAGRAM
Telephone
dialler
98 28
138
CLIMATE CONTROL
TECHNICAL INFORMATION
GENERAL CHARACTERISTICS
Sensor NTC
Battery power supply V DC 2 x 1.5 V (AAA)
Fastened Wall / 503 box
Contact capacity on resistive load A 8
Regulation range °C +2 ÷ +35
Differential °C 0.1 ÷ 1
Protection IP 40
Battery life months 12
REFERENCE STANDARDS
Compliance with Community Directives:73/23/CEE mod. from 93/68/CEE (Low Voltage) 89/336/CEE mod. from 92/31/CEE and 93/68/CEE (E.M.C.)
is declared with reference to the following standards: • Safety: EN 60730-2-9 • E.M. Compatibility: EN 61000-6-1 / EN 61000-6-3
33
CLIMATE CONTROL TIME MANAGEMENT GAS AND SAFETY MEASUREMENT HEAT REGULATION INSULATORS AND
AND CONTROL BUSBAR SUPPORTS
Electronic thermostats LIV
Series of thermostats for electronic regulation of the ambient temperature. 1 Direct wall installation or on a 503 type box or similar box
2 LED signalling the presence of voltage (Liv-A)
or battery test (Liv-B)
3 Four models are available:
- Liv DNS-A with DAY-NIGHT-SUMMER selector
1 2 - Liv-A without selector
- Liv DN-B with DAY-NIGHT selector
- Liv SW-B with SUMMER-WINTER selector
4 230 V power supply for the Liv-A model or with 2 AAA type
1.5 V batteries for the Liv-B model
5 Guaranteed comfort and consumption control in both winter
(heating) and summer (air conditioning)
4 3
WALL-MOUNTING THERMOSTATS
• Wall-mounting electronic ambient thermostat or on a 503 box or similar box
• Four models are available:
- LIV DNS-A with DAY-NIGHT-SUMMER selector
(the NIGHT position lowers the set temperature by 3° C)
- LIV-A without selector (it is possible to lower the temperature by 3° C
by closing an external contact)
- LIV DN-B with DAY-NIGHT selector
- LIV SW-B with SUMMER-WINTER selector
• Intervention differential for LIV-A:
- fixed at 0.3 °C with ON/OFF type regulation
- proportional with differential of 0.8 °C and time base 8 minutes
- proportional with differential of 1.5 °C and time base 15 minutes
• Intervention differential for LIV-B: fixed at 0.5 °C with ON/OFF regulation type
• Bistable relay output with 8 A change-over contact (250 V AC)
34
Dimensions (mm) CONNECTION DIAGRAM
LIV-A
Relay output
92
LIV-B
115 32
Relay output
CLIMATE CONTROL
TECHNICAL INFORMATION
GENERAL CHARACTERISTICS
Model LIV-A / LIV DNS-A Model LIV DN-B / LIV SW-B
Sensor NTC Sensor NTC
Network power supply V AC 230 Battery powered V DC 2 x 1.5 V (AAA)
Frequency Hz 50 / 60 Battery life months 12
Fastened Wall Fastened Wall
Contact capacity on resistive load A 8 Contact capacity on resistive load A 8
Regulation range °C +5 ÷ +35 Regulation range °C +5 ÷ +35
Differential °C 0,3 Differential °C 0,5
Protection IP 40 Protection IP 40
REFERENCE STANDARDS
Compliance with Community Directives:73/23/CEE mod. from 93/68/CEE (Low Voltage) 89/336/CEE mod. from 92/31/CEE and 93/68/CEE (E.M.C.)
is declared with reference to the following standards: • Safety: EN 60730-2-9 • E.M. Compatibility: EN 61000-6-1 / EN 61000-6-3
35
CLIMATE CONTROL TIME MANAGEMENT GAS AND SAFETY MEASUREMENT HEAT REGULATION INSULATORS AND
AND CONTROL BUSBAR SUPPORTS
Mechanical thermostats KLIMA
Series of thermostats to regulate the ambient temperature. 1 ON/OFF switch (KLIMA IN and KLIMA SI)
2 Ergonomical regulation knob
3 Reduced size and compact design
4 Available in 7 models
4 3
WALL-MOUNTING THERMOSTATS
• Gas membrane ambient thermostat
• Regulation range: +5 °C ÷ +30 °C
• Fixed differential: Δ 1.3 °C (± 0.2 °C)
• Fastened to wall
• For installation in places at an altitude > 1000 m asl
the calibration values are not guaranteed
36
Dimensions (mm)
83.7
30.9
60
82.9
60
76.5
CLIMATE CONTROL
TECHNICAL INFORMATION
CONNECTION DIAGRAM
KLIMA 2 KLIMA 3 KLIMA 3L KLIMA IN KLIMA SI KLIMA SW KLIMA 2V
GENERAL CHARACTERISTICS
KLIMA 3L - KLIMA IN
Model KLIMA 2 - KLIMA 3 Model KLIMA SI - KLIMA SW -KLIMA 2V
Contact capacity on resistive load at 250 V AC A 16 (2,5) Contact capacity on resistive load at 250 V AC A 10 (1,5)
Regulation range °C +5 ÷ +30 Regulation range °C +5 ÷ +30
Differential °C Δ 1.3 ± 0.2 Differential °C Δ 1.3 ± 0.2
Protection IP 20 Protection IP 20
REFERENCE STANDARDS
Compliance with Community Directives:73/23/CEE mod. from 93/68/CEE (Low Voltage) 89/336/CEE mod. from 92/31/CEE and 93/68/CEE (E.M.C.)
is declared with reference to the following standards: • Safety: EN 60730-2-9 • E.M. Compatibility: EN 55014
37
CLIMATE CONTROL TIME MANAGEMENT GAS AND SAFETY MEASUREMENT HEAT REGULATION INSULATORS AND
AND CONTROL BUSBAR SUPPORTS
Mechanical thermostats KONT
Contact thermostat for pipes used for boilers, kettles and other equipment 1 Boxed unipolar liquid expansion thermostat
for which it is necessary regulate the temperature by contact on pipes. 2 Precise and constant operation over time
3 Particularly suitable for temperature detection on
pipes for heating systems and various other applications
4 Switch contacts with grommet
1 5 Spring strap for constant seal to ensure good adherence
on the pipe
3
4
38
Dimensions (mm) CONNECTION DIAGRAM
CLIMATE CONTROL
TECHNICAL INFORMATION
GENERAL CHARACTERISTICS
Regulation range °C +10 ÷ +90
Differential °C 5 ÷10
Contact capacity on resistive load at 250 V AC A 15
Protection IP 20
REFERENCE STANDARDS
Compliance with Community Directives:73/23/CEE mod. from 93/68/CEE (Low Voltage) 89/336/CEE mod. from 92/31/CEE and 93/68/CEE (E.M.C.)
is declared with reference to the following standards: • Safety: EN 60730-2-9 • E.M. Compatibility: EN 61000-6-1 / EN 61000-6-3
39
CLIMATE CONTROL TIME MANAGEMENT GAS AND SAFETY MEASUREMENT HEAT REGULATION INSULATORS AND
AND CONTROL BUSBAR SUPPORTS
Accessories X.Code WAVE
Telephone activator for the remote management of the ON/OFF command using the hard line. Wall-mounting hard line telephone activator
ON ON/OFF
152 44
REFERENCE STANDARDS
Compliance with 99/05/CE Directive is declared in reference to the following standards:
• Safety: EN 60730-1 • E.M. compatibility: EN 50082-2 / EN 50081-1 • The device complies to standard TBR21
40
Accessories X.Code BUS
Telephone activator for remote management by text messages: Wall-mounting GSM network telephone activator
- the ON/OFF command of a relay
- a serial bus on the RS-485 line
• Possibility to use any SIM-card with the operator chosen
by the user (SIM-card not supplied with the activator)
• Power supply: 230 V AC (-15% ÷ +10%), 50/60 Hz
• Relay output: bistable type with C-NA contact.
Contact capacity: 5A 250 V AC on resistive load
• Antenna integrated in the device
• ON/OFF relay indicator LED and range presence
• Serial bus output: RS-485 type
• Operating temperature: 0 ÷ 50 °C
• Manual forcing (ON/OFF) of the relay status
• Possibility to increase the load using MA - 16
(see accessories)
Power Supply
91
Relay
152 44
REFERENCE STANDARDS
Compliance with 99/05/CE Directive is declared in reference
to the following standards: EN 60950-1 / EN 301489-1/7
41
CLIMATE CONTROL TIME MANAGEMENT GAS AND SAFETY MEASUREMENT HEAT REGULATION INSULATORS AND
AND CONTROL BUSBAR SUPPORTS
Accessories
X.Temp MA16
External temperature probe Relay module for dialler
• NTC sensor (100k Ω at 25°C) for programmable thermostats • Power supply: 230 V AC (-15% ÷ +10%) 50/60 Hz
• Degree of protection: IP66 • Possibility of commanding loads up to 16 A - 250 V
• Cable length: 2 meters • Usable to increase the load commanded by telephone activators
(extensible up to 40 meters with min. 1 mm2 section bipolar cable)
• Operating temperature: -40 °C ÷ +60 °C
Model
MA16
Description
Relay module for telephone activator
Code Code
VN883500 VN165700
35 60
CONNECTION
DIAGRAM
42
Accessories
TX.Athena AXO
Radio frequency module Adapter to Axolute plate
• Radio frequency plug-in module for Athena and Klio • AXO adapter to adapt the Dafne programmable thermostat
• Inserted in the Athena programmable thermostat it provides or the Keo thermostat to residential series plate: Bticino series Axolute
the radiofrequency and the connection to the Athena.Temp probes
• Inserted in the Klio thermostat it provides the radiofrequency
Code Code
VN944500 VE076600
Model Model
TX.Athena AXO
Description Description
Radio frequency plug-in module for Athena and Klio Adapter to Axolute plate for Dafne and Keo
43
CLIMATE CONTROL TIME MANAGEMENT GAS AND SAFETY MEASUREMENT HEAT REGULATION INSULATORS AND
AND CONTROL BUSBAR SUPPORTS
Accessories
Athena.Temp RX4 8A
Programmable probe Remote actuator
• Wall-mounting programmable remote probe for Athena programmable thermostat • Remote actuator for the Athena programmable thermostat
• Temperature range measured: 0°C ÷ +40°C and the Klio thermostat with radiofrequency receiver
• Power supply: two AAA type 1.5 V alkaline batteries (12 months life) • Output: 3 bistable relays with change-over contact
• Flat battery indicator and 1 bistable relay NO (8 A / 250 V AC)
• Power supply: 230 V AC (-15% ÷ +10%), 50/60 Hz
• Modular version: 4 DIN modules
• Supplied with antenna tuned to 433.92 Mhz with a 4.5 meters long cable
Model Model
Athena.Temp RX4 8A
Description Description
Programmable temperature probe for Athena programmable thermostat 4 channels remote actuator for Athena and Klio
Code Code
VN942900 VN943700
45
44
Accessories
RX1 8A RX.ANT
Remote actuator Antenna
• Remote actuator for the Athena programmable thermostat • Frequency range: 433.92 ± 10 Mhz
and the Klio thermostat with radiofrequency receiver • Input impedence: 50 ohm
• Output: 1 bistable relay with 8 A change-over contact (8 A / 250 V AC) • Cable length: 4.5 meters
• Power supply: 230 V AC (-15% ÷ +10%), 50/60 Hz
• Modular version: 2 DIN modules
• Input for antenna (RX.ANT) not included
Model
RX1 8A
Description
1 channel remote actuator for Athena and Klio
Power supply
230 V AC
Code Code
VE015400 VE017000
45
CONNECTION DIAGRAM
8A / 250V CA
45
CLIMATE CONTROL TIME MANAGEMENT GAS AND SAFETY MEASUREMENT HEAT REGULATION INSULATORS AND
AND CONTROL BUSBAR SUPPORTS