Академический Документы
Профессиональный Документы
Культура Документы
Marklin Pobar
Percival Valencia
Daniel Valenzona
Course: AVIONICS Technology
wrought alloys
casting alloys.
A further differentiation is based primary on mechanism of property development. Many alloys respond
to thermal treatment based on phase solubility. These treatments include solution heat treatment,
quenching and precipitation, or age hardening.
In order to improve the surface properties of final products of aluminium alloys, such as corrosion
resistance, wear resistance, reflectivity etc., different types of surface treatment were designed. All of
them are divided into the following groups.
CHEMICAL TREATMENT
Chemical brightening
Chemical treatment to improve the optical reflectivity of a surface.
Chemical polishing
Polishing of a metal surface by immersion in a solution of chemical reagents.
Degreasing
Removal of oil or grease, usually by a suitable organic solvent or an aqueous detergent.
Etching
Roughening of the surface of a metal by overall or selective dissolution in acid or caustic media.
Pickling
Removal of a thin surface layer of a metal by chemical action, mainly by treatment in a caustic
solution.
ELECTROCHEMICAL TREATMENT
Electrochemical brightening
Electrochemical treatment to improve the optical reflectivity of a surface.
Electropolishing
Polishing of a metal surface by making it anodic in an appropriate electrolyte.
Anodized metal
Metal with an anodic coating, produced by an electrolytic oxidation process in which the metal is
converted to a mainly oxide coating having protective, decorative or functional properties.
Clear anodized metal
Treatment of anodic oxidation coatings on metal to plug the pores and reduce the absorption capacity
of the coating by chemical processes carried out at low temperatures after anodizing.
Significant surface
The part of the product covered or to be covered by the coating and for which the coating is essential
for serviceability and/or appearance.
COATING
Coating (organic)
Method in which a coating material is applied on a metallic substrate. This process includes cleaning
and chemical pre-treatment and either:
one-side or two-side, single or multiple application of liquid or powder coating materials which
are subsequently cured, or
Film coating
Organic film applied to a substrate to which an adhesive and, if appropriate, a primer has been applied
beforehand.
Lacquering
Coating with a formulation based on a dissolved material which forms a transparent layer primarily
after drying by evaporation of the solvent.
Painting
Coating with a non-transparent formulation containing pigments.
NONCHEMICAL SURFACE TREATMENT FOR ALUMINUM ALLOYS
Gerhardus H. Koch; Gary L. Todd; Arnold Deutchman; Robert Partyka; CC TECHNOLOGIES
LABORATORIES INC DUBLIN OH
The state-of-the-art chemical surface treatments for adhesive bonding of aluminum alloys, such as
phosphoric acid anodizing (PAA) are the basis of the present high-strength and durable adhesive
bonds. Because of increasingly strict regulations on the use of wet chemicals, the Materials Directorate
at Wright Laboratories initiated a research program to develop alternative nonchemical techniques
that do not produce waste and are not detrimental to health and environment. This report describes
the development of a nonchemical process, based on ion beam enhanced deposition (IBED). The
process consists of various steps, the major ones being grit blasting with 50 micrometers Al2O3 grit
and deposition of (proportional to) - Al2O3 with IBED. The resulting surface is dense and corrosion
resistant, and provides an excellent basis for adhesive bonding. Strength and durability studies on peel
and wedge type specimens is equivalent to that of anodized specimens. Surface analytical studies,
Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), X-ray Photoelectron
Spectroscopy (XPS), Fourier Transform Infrared Spectroscopy (FTIR) , and Atomic Force Microscopy
(AFM), as well as electrochemical studies were used to characterize the surface and determine the
mechanism of adhesion.
EXCIMER LASER SURFACE TREATMENT OF ALUMINUM ALLOY AA7075 TO IMPROVE
CORROSION RESISTANCE.
T. M. YueCorresponding Author Contact Information, E-mail The Corresponding Author, a, L. J. Yana, C. P.
Chana, C. F. Donga, H. C. Mana and G. K. H. Pang
Excimer laser surface treatment was found to be an effective method for improving the pitting
corrosion resistance of the aluminum alloy 7075. The results of the TEM study showed that laser
surface melting of the alloy at an intensity of 10.3 J/cm2 resulted in the elimination of coarse secondphase particles in the laser-melted zone. More importantly, two compact layers containing aluminum
oxide were formed on top of the laser-melted surface. Potentiodynamic polarization tests showed that
as a result of the laser treatment, the corrosion current can be reduced by as much as six times, and a
passive region was obtained. Besides, the analysis of the electrochemical impedance measurements
showed that at an open-circuit potential (OCP), the polarization resistance and double-layer
capacitance of the film/electrolyte interface of the laser-treated specimen were one order of magnitude
higher and six times lower than that of the untreated specimen, respectively. Furthermore, when
tested at OCP+50 mV, the untreated specimen suffered serious pitting corrosion, while a passive film
had formed on the laser-treated specimen, which served as an effective barrier for reducing anodic
dissolution.