Академический Документы
Профессиональный Документы
Культура Документы
1983
1987
Professional Experience
September 1987 - June 1989
1.
2.
3.
4.
5.
6.
7.
8.
2.
3.
4.
5.
6.
7.
Pulsed Electrodeposition of CuInSe2 Thin Films with Morphology for Solar Cell
Applications, M. Sreekanth, B.V. Sarada, S.R. Dey and S.V. Joshi, Journal of The
Electrochemical Society, Vol. 160 (4), 2013, p.173-177.
8.
9.
10.
11.
Factors Influencing Properties of CrN Thin Films Grown by Cylindrical Cathodic Arc
Physical Vapour Deposition on HSS Substrates, Krishna Valleti, C. Rejin, S.V.Joshi,
Materials Science and Engineering A, Vol. 545, 2012, p. 155-161.
12.
13.
14.
15.
In situ Particle Generation and Splat Formation during Solution Precursor Plasma
Spraying of Yttria Stabilized Zirconia Coatings, G.Sivakumar, R.O.Dusane and
S.V.Joshi, J.Am. Ceram.Soc., Vol. 94(12), 2011, p.4191.
16.
17.
18.
19.
20.
21.
Sliding Wear Behaviour of Laser Surface Modified Pearlitic Rail Steel, S.M.Shariff,
T.K.Pal, G.Padmanabham and S.V.Joshi, Surface Engineering, Vol. 26, 2010, p.199.
22.
23.
Page | 3
24.
25.
Effect of Grinding on Plain Fatigue and Fretting Fatigue Behaviour of Detonation Gun
Sprayed Cu-Ni-In Coating on Al-Mg-Si Alloy, B. Rajasekaran, S. Ganesh Sundara
Raman, S.V. Joshi and G. Sundararajan, Intl. J. Fatigue, Vol. 31, 2009, p.791.
26.
Optical Diagnostics Study of Gas Particle Transport Phenomena in Cold Gas Dynamic
Spraying and Comparison with Model Predictions, P.Sudarshan Phani,
V.Vishnukanthan, S.V.Joshi and G.Sundararajan, J. of Thermal Spray Technology,
Vol.17, 2008, p.551.
27.
28.
Effect of Microarc Oxidised Layer Thickness on Plain Fatigue and Fretting Fatigue
Behaviour of Al-Mg-Si Alloy, B. Rajasekaran, S. Ganesh Sundara Raman, S.V. Joshi
and G. Sundararajan, Intl. J. Fatigue, Vol. 30, 2008, p.1259.
29.
30.
Growth of Nano Crystalline Near Phase Tantalum Thin Films at Room Temperature
Using Cylindrical Magnetron Cathode, Krishna Valleti, A. Subrahmanyam and Shrikant
V. Joshi, Surface Coatings & Technology, Vol. 202, 2008, p.3325.
31.
32.
33.
Influence of Microarc Oxidation and Hard Anodizing on Plain Fatigue and Fretting
Fatigue Behaviour of Al-Mg-Si Alloy, B. Rajasekaran, S. Ganesh Sundara Raman, L.
Rama Krishna, S.V. Joshi and G. Sundararajan, Surface & Coatings Technology, Vol.
202, 2008, p. 1462.
34.
35.
36.
37.
38.
39.
40.
41.
42.
43.
Effect of Detonation Gun Sprayed Cu-Ni-In Coating on Plain Fatigue and Fretting
Fatigue Behaviour of Al-Mg-Si Alloy, Rajasekaran B, Raman SGS, Joshi SV, et al.,
Surface & Coatings Technology 201 (3-4): 1548-1558, 2006, Vol. 201 (3-4), p. 1548.
44.
45.
46.
47.
48.
Laser Surface Alloying of Medium Carbon Steel with SiCp, Thin Solid Films, G.
Thawari, G. Sundararajan and S.V. Joshi, 2003, Vol. 423 (1), p. 41.
49.
50.
Effect of Al Content on Microstructure and Cyclic Oxidation Performance of PtAluminide Coatings, D.K. Das, Vakil Singh and S.V. Joshi, Oxidation of Metals, 2002,
Page | 5
52.
53.
Effect of Pre-Aluminizing Diffusion Treatment on Microstructural Evolution of HighActivity Pt-Aluminide Coatings, DK Das, V. Singh and S.V. Joshi, Metallurgical and
Materials Transactions A-Physical Metallurgy and Materials Science, 2000, Vol. 31 (8),
p. 2037.
54.
Study of Plasma and Detonation Gun Sprayed Alumina Coatings Using Taguchi
Experimental Design, P. Saravanan, V. Selvarajan, M.P. Srivastava, D.S. Rao, S.V.
Joshi and G. Sundararajan, J. Thermal Spray Technology, Dec. 2000, Vol. 9 (4), p. 505.
55.
56.
57.
The Cyclic Oxidation Performance of Aluminide and Pt-Aluminide Coatings on Cast NiBased Superalloy CM-247, D.K. Das, Vakil Singh and S.V. Joshi, JOM-e, 52 (1), 2000.
58.
59.
Parametric Influence on Cut Quality Attributes and Generation of Processing Maps for
Laser Cutting, S.M. Shariff, G. Sundararajan and S.V. Joshi, J. Laser Applications,
1999, Vol.11 (2), p. 54.
60.
61.
62.
63.
64.
65.
66.
67.
"On the Thermal Cycling Life of Plasma Sprayed Yttria Stabilized Zirconia Coatings",
S.V. Joshi and M.P. Srivastava, Surface and Coatings Technology, 1993, Vol. 56, p.
215.
68.
69.
70.
71.
"Plasma Spraying of WC-Co Part II: Experimental Study of Particle Deposition and
Coating Microstructures", S.V. Joshi and M.P. Srivastava, J. Thermal Spray Technol.,
1993, Vol. 2, p. 133.
72.
73.
"Comparison of Particle Heat-Up and Acceleration during Plasma and High Velocity
Oxy-Fuel Spraying", S.V. Joshi, Powder Metallurgy International, Nov. 1992, Vol. 24, p.
373.
74.
"Plasma Spraying of Ceramic Powders Produced by the Sol-Gel Technique", S.V. Joshi
and D. Ganguli, Metals, Materials and Processes, 1992, Vol. 4, p. 33.
75.
76.
"A Prediction Model to Assist Plasma and HVOF Spraying", S.V. Joshi, Mat. Lett., Jun.
1992, Vol.14, p. 31.
77.
"Particle Behaviour During High Velocity Oxy-Fuel Spraying", S.V. Joshi and R.
Sivakumar, Surface and Coatings Technology, Dec. 1991, Vol. 50, p. 67.
78.
Page | 7
79.
80.
81.
"Removal of Heavy Metals in Publicly Owned Treatment Works", D.B. Aulenbach, M..A.
Meyer, E. Beckwith, S.V.Joshi, C.Vasudevan and N.L. Clesceri, Environmental
Progress, 1987, Vol. 6, p. 91.
82.
"Particle-Gas Mass Transfer Under Plasma Conditions", S.V. Joshi, J.Y. Park, P.R.
Taylor and L.S. Richardson, Intl. Journal of Heat and Mass Transfer, 1986, Vol. 29, p.
1565.
83.
84.
"The Integral Mean Diffusivity for Particle-Gas Mass Transfer Under Thermal Plasma
Conditions", S.V. Joshi, J.Y. Park, P.R. Taylor and L.S. Richardson, Plasma Chemistry
and Plasma Processing, 1985, Vol. 5 (2), p. 143.
85.
"Removal of Heavy Metals in Publicly Owned Treatment Works Using Alum or Sodium
Aluminate for Phosphorous Removal," in "Toxic and Hazardous Wastes, D. B.
Aulenbach, N.L. Clesceri, M.A. Meyer, C. Vasudevan, E. Beckwith and S.V. Joshi, Proc.
16th Mid-Atlantic Industrial Wastes Conference, M.D. Lagrega and D.A. Long eds.,
1984, p. 1.
Book chapters
86.
87.
Laser Surface Modification for Protection Against Wear, S.V.Joshi and Manish Roy in
Surface Engineering for Enhanced Performance against Wear (Manish Roy ed.),
Springer Verlag Wien, 2013, p. 229.
88.
89.
90.
91.
High Performance Thermal Barrier Coatings and Relevance of Power Beams in their
Development, S.V. Joshi, Power Beams And Materials Processing 2002, p. 106.
Page | 8
92.
"Lasers for Metallic and Intermetallic Coatings", S.V. Joshi and G. Sundararajan, in
Lasers in Surface Engineering (N.B. Dahotre ed.), ASM, Materials Park, OH, 1998, p.
121.
93.
94.
Surface Engineering, by D.Srinivasa Rao and S.V.Joshi eds., Centre for Science &
Technology of the Non-Aligned and Other Developing Countries (NAM S&T Centre),
2010.
96.
97.
98.
2.
S. Arun, G. Sundararajan and S.V. Joshi, ARCI Translating Research into Technology,
Proceedings of the South-South Cooperation for Technology Transfer and Development
of Small and Medium Enterprises (SMEs), Srilanka 2008, p 297-311, 2011
3.
New Markets and Applications for Thermal Spray Coatings in India, G. Sundararajan,
S. V. Joshi and Y. R. Mahajan, Proceedings of International Thermal Spray Conference
2009, Las Vegas, USA, 2009 (In press)
4.
Laser Weldability Studies for Fabrication of Tailor Welded Blanks (TWB) for Automotive
Applications, J K Sarin Sundar, S Shukla, B Shanmugarajan, G Padmanabham and S
V Joshi, Proceedings of SIAT 2007 Conference, Pune, 2007 (In press)
5.
Laser Cutting and Welding Technologies for Strategic Applications J.K. Sarin Sundar,
G. Padmanabham and S.V. Joshi Proceedings of Seminar on Missile Systems and
Technologies (MAST-2007), Hyderabad, p 157-164, 2007
7.
8.
9.
10.
11.
12.
Solid Particle Erosion Behaviour of Laser Surface Modi ed Al-12 Si Alloy, S S Reddy,
S M Shariff, B Venkataraman and S V Joshi, Proceedings of INCOSURF-2004, p 333340, 2004
13.
14.
15.
High Performance Thermal Barrier Coatings and Relevance of Power Beams in their
Development, S V Joshi, Proceedings of DAE-BRNS Symposium on Applications of
Plasmas, Lasers and Electron Beams in Advanced Materials Processing (Power Beams
& Materials Processing PBAMP- 2002), (eds.) A K Das, A V Bapat and A K Sinha, p
105-117, 2002
16.
51, 2002
17.
Materials Processing Possibilities with High Power Lasers, S V Joshi and J K Sarin
Sundar, Proceedings of National Workshop on High Power Lasers and Directed Energy
Applications, New Delhi, p 71, 2002
18.
19.
20.
21.
Parametric Impact on the Microstructure and Wear Behaviour of Laser Surface Alloyed
Iron Boride Layers, SM Shariff, G Sundararajan and S V Joshi, Proceedings of Surface
Modication Technologies SMT-XIII, (eds.)TS Sudarshan, KA Khor and M Jeandin,
Singapore, p.135-144,1999
22.
Thermal Barrier Coatings for Advanced Gas Turbines: Some Materials Processing and
Evaluation Related Issues, S V Joshi, Proceedings of International Corrosion
Conference (CORCORN-97), India, p 163-175, 1997
List of patents
Granted
2.
An Improved Method of Forming Holes on a Substrate Using Laser Beams, J.K. Sarin
Sundar, S.V. Joshi and G. Sundararajan, Indian Patent No. 239647, Grant date
29/03/2010.
Applied
3.
Improved Cylindrical Magnetron Cathode and a Process for Depositing Thin Films on
Surfaces Using the Said Cathode, Aryasomayajula Subrahmanyam, Krishna Valleti,
Shrikant Viswanath Joshi and Govindan Sundararajan, Application No. 21/DEL/2008,
filing date 03/01/2008.
4.
A Process for Continuous Coating Deposition and an Apparatus for Carrying Out the
Process, L.Ramakrishna, N.Wasekar, S.V. Joshi and G. Sundararajan, Indian Patent
No. 1829/DEL/2008, Publication date 01/08/2008.
5.
17/10/2011. Also filed in US, UK, Japan, Brazil, Germany, France and South Africa
6.
"An Improved Solar Selective Multilayer Coating and a Method of Depositing the same",
Krishna Valleti and Shrikant Vishwanath Joshi, Application No. 1567/DEL/2012, filing
date 22/05/2012.
7.
8.
1.
2.
3.
Metallurgist of the Year Award, Ministry of Steel & Indian Institute of Metals, 2009
4.
5.
6.
7.
8.
Peer Recognition
1.
2.
3.
Member - PAC on Lasers, Optics and Atomic & Molecular Physics, SERC, DST
4.
Member Expert Committee (Engineering Sciences), Fast Track Scheme for Young
Scientists, DST
5.
6.
Member Materials & Processes Panel, Aeronautical Research & Development Board
(past position)
Page | 12
7.
8.
9.
10.
Regular reviewer for various SCI Journals (Surface Coating Technology, Journal of
Thermal Spray Technology, Journal of Materials Engineering Performance, International
Journal of Refractory Metals & Hard Materials
11.
Contact information
International Advanced Research Centre for Powder Metallurgy and New Materials (ARCI)
Balapur Post
Hyderabad - 500005
INDIA.
Phone: 0091-40-24441077 (O), 27608723 (R); (0) 9490117226 (M)
Email: addl.director@arci.res.in, svjoshi@arci.res.in
Page | 13