Академический Документы
Профессиональный Документы
Культура Документы
0 exam Respuestas
Espaol- English
10. Qu campos de encabezado dos TCP se utilizan para confirmar la recepcin de los
datos?
1. nmero de secuencia
2. nmero de acuse de recibo
3. checksum
4. indicador FIN
5. flag SYN
11. Durante una sesin TCP, un dispositivo de destino enva un nmero de acuse de
recibo al dispositivo fuente. Qu representa el nmero de reconocimiento?
1. el siguiente byte que el destino espera recibir
2. el ltimo nmero de secuencia que fue enviado por la fuente
3. un nmero ms que el nmero de secuencia
4. el nmero total de bytes que se han recibido
12. Durante una sesin TCP, el campo SYN es utilizado por el cliente para solicitar la
comunicacin con el servidor
13. Un dispositivo host necesita enviar un archivo de vdeo grande a travs de la red
mientras que proporciona la comunicacin de datos a otros usuarios. Qu
caracterstica permitir que diferentes flujos de comunicacin que se produzcan al
mismo tiempo, sin tener un nico flujo de datos usando todo el ancho de banda
disponible?
1. multiplexacin
2. tamao de ventana
3. reconocimientos
4. nmeros de puerto
14. Un PC est descargando un archivo grande de un servidor. La ventana TCP es
1000 bytes. El servidor enva el archivo mediante segmentos de 100 bytes. Cuntos
segmentos ser enviado al servidor antes de que se requiere un reconocimiento de la
PC?
1. 10 segmentos
2. 100 segmentos
3. 1.000 segmentos
4. 1 segmento
15. Un tcnico desea utilizar TFTP para transferir un archivo grande desde un
servidor de archivos a un router remoto. Qu afirmacin es correcta acerca de este
escenario?
20.
22.
English
2. A host device sends a data packet to a web server via the HTTP protocol. What is
used by the transport layer to pass the data stream to the proper application on the
server?
1. destination port number
2. source port number
3. sequence number
4. acknowledgment
3. Fill in the blank using a number. A total of____ messages are exchanged during the
TCP session termination process between the client and the server.
four
8. Compared to UDP, what factor causes additional network overhead for TCP
communication?
1. network traffic that is caused by retransmissions
2. the identification of applications based on destination port numbers
3. the checksum error detection
4. the encapsulation into IP packets
9. What is a socket?
1. the combination of a source IP address and port number or a destination IP address
and port number
2. the combination of the source and destination sequence numbers and port numbers
3. the combination of the source and destination sequence and acknowledgment numbers
4. the combination of the source and destination IP address and source and destination
Ethernet address
10. Which two TCP header fields are used to confirm receipt of data?
1. Sequence number
2. Acknowledgement number
3. checksum
4. FIN flag
5. SYN flag
12. During a TCP session, the SYN field is used by the client to request
communication with the server
13. A host device needs to send a large video file across the network while providing
data communication to other users. Which feature will allow different communication
streams to occur at the same time, without having a single data stream using all
available bandwidth?
1. multiplexing
2. window size
3. acknowledgments
4. port numbers
14. A PC is downloading a large file from a server. The TCP window is 1000 bytes. The
server is sending the file using 100-byte segments. How many segments will the server
send before it requires an acknowledgment from the PC?
1. 10 segments
2. 100 segments
3. 1000 segments
4. 1 segment
15. A technician wishes to use TFTP to transfer a large file from a file server to a
remote router. Which statement is correct about this scenario?
1. The file is segmented and then reassembled in the correct order at the destination, if
necessary, by the upper-layer protocol..
2. The file is segmented and then reassembled in the correct order by TCP.
3. The file is not segmented, because UDP is the transport layer protocol that is used by
TFTP.
4. Large files must be sent by FTP not TFTP.
17. Which two flags in the TCP header are used in a TCP three-way handshake to
establish connectivity between two network devices? (Choose two.)
1. SYN
2. ACK
3. URG
4. PSH
5. RST
6. FIN
18. What does a client application select for a TCP or UDP source port number?
1. a random value in the range of the registered ports
2. a predefined value in the dynamic port range
3. a predefined value in the range of the registered ports
4. a predefined value in the well-known port range
5. a random value in the dynamic port range
6. a random value in the well-known port range
20.
22.