Академический Документы
Профессиональный Документы
Культура Документы
Wheel Loaders
Engine Model
950H
962H
Cat C7 ACERT
Cat C7 ACERT
197 hp
209 hp
Bucket Capacities
Operating Weight
Key Features
Performance Series Buckets
The new Performance Series buckets are easier to
load, achieve greater fill factors and retain more
material for significantly greater productivity and
fuel efficiency.
Work Tools
A large variety of pin-on and coupler work tools
areavailable for your machine. Cat Work Tools
are durable, reliable and designed for improved
performance and efficiency.
Cab and Controls
The cab has been updated for unmatched comfort
and efficiency. A new center display combines
the Electronic Monitoring System with the gauge
cluster which enabled the control panel on the
right front ROPS post to be reduced in size for
better visibility. The analog-like gauges have
green and red zone indicators so operators can
easily see if machine systems are within operating
range. The right hand door is replaced with a
window which is vertically split for easy opening
and closing.
Transmission Improvements
The legendary Cat planetary power shift transmission
is updated to provide faster acceleration, speed
up ramps and greater operatorcomfort due to
smoother shifting.
Hydraulics
A new mono block main hydraulic valve is
implemented into the machine. Its mono block
design is smaller and lighter which improves
access for service and machine weight distribution.
Contents
Reliability ..............................................................4
Durability ..............................................................5
Productivity ..........................................................6
Versatility ..............................................................8
Serviceability .....................................................12
Sustainability .....................................................13
Specifications ....................................................14
Optional Equipment...........................................27
The 950H and 962H deliver performance you can feel in the most demanding applications. These machines offer
unmatched operator comfort and efficiency in a world-class cab. New Performance Series buckets deliver decreased
dig times, greater fill factors and superior material retention to increase productivity and reduce fuel consumption.
Revolutionary electro-hydraulic (EH) provide low-effort finger-tip operation of lift, tilt and auxiliary work tool controls.
The reliability, durability, and versatility of the 950H and 962H result in machines that are better built to meet your needs.
3
Reliability
Tested and Proven Ready to Work.
Monitoring Programs
Monitoring product health is key to maintaining reliability of any equipment. Many programs offered by your Cat dealer make the tracking
ofyour machine health quick and easy. These programs include Product Link*, VisionLink, and SOSSM Services.
Structures
The H Series features many components which leverage product designs that have delivered reliable and durable machines
forgenerations.
* Not all programs are available in all areas. See your Caterpillar dealer for details.
Durability
Better Built to Meet Your Needs.
Z-Bar Linkage
The proven Z-bar linkage with Performance Series Buckets offer excellent penetration
intothe pile, high breakout forces, good roll back angles and faster dig times. The results
are improved tire life, superior fuel efficiency and exceptional production capabilities;
allhelping to enable a sustainable solution for your business.
C7 ACERT Engine
The Cat C7 engine with ACERT Technology maintains engine performance, efficiency
anddurability while dramatically reducing emissions. Electronic fuel injection isprovided
through thewell-proven Caterpillar hydraulically actuated, electronically controlled unit
injection (HEUI) system. Awastegate turbocharger, equipped with a titanium wheel for
improved durability, combined with air-to-air aftercooling provides consistent high
horsepower withincreased altitude capability.
Axles
The axles are designed to handle extreme applications resulting in reliable performance
and extended life. The front axle is rigidly mounted to the frame in order to withstand internal
torque loads and still maintain support for the wheel loader. The rear axle can oscillate to
13 degrees helping to ensure all four wheels stay on the ground providing stability even
inthe roughest terrain.
Productivity
Work Smart and Move More.
Transmission
The legendary Cat planetary power shift transmission is updated with new
shiftlogic. The downshift from 2 to 1 forward is now based upon torque
requirements versus ground speed. This enables operators to use the fully
automatic 1-4 mode which saves fuel and improves productivity and comfort.
Speed shifts, both up shifts and downshifts have been dramatically improved
for improved acceleration, speed on ramps and operator comfort.
On-Demand Fan
With electronic control of the variable speed on-demand fan, temperature
levels of the engine coolant, transmission oil, hydraulic oil and air inlet manifold
are constantly monitored. This data is used to control and maintain fan speed
atthe level necessary to maintain normal system temperatures. Controlled fan
speed improves fuel efficiency, lowers noise levels and reduces radiator plugging.
Ride Control
The optional Ride Control System improves ride, performance and load retention
when traveling over rough terrain. Operators gain confidence moving at higher
speeds in load and carry operations decreasing cycle times and increasing
productivity. Ride Control also reduces loads induced by travel over rough
terrain and can extend the life of structures and drive line components.
Versatility
Work Tool Options to Meet Your Needs.
Higher Productivity
Performance Series Buckets achieve higher fill factors for
youroperation ranging from 100% to 115% depending on
themachine application and material type. Thebuckets feature
optimized geometry with a bucket opening matched to the
machines linkage and incorporate a curved side profile to
maximize material retention. The optimized design results
inunsurpassed production capabilities.
Note: Check with your local Cat dealer for availability of work
tools and quick coupler systems.
No Loss of Performance
Fusion is designed to integrate the worktool and the machine by pulling the coupler
andtool closerin to the loader. As a result, the center of gravity is moved inward,
towards the machine. This translates to increased lifting ability when compared
tomachines equippedwith other coupler systems.
Fusion eliminates
coupler offset...
...with
substantial
improvements in
center of gravity.
Unsurpassed Durability
An advanced wedging mechanism creates a tight, rattle-free fit. This patented lock up
system eliminates play and wear resulting in a long service life.
Increased Visibility
A new, open coupler frame design clears sight lines from the operators seat, making
iteasier than ever before to engage and disengage attachments with certainty.
Operator Environment
Work Comfortably and Efficiently.
Visibility
Visibility is excellent to both the front and rear of these
machines. Distortion-free flat glass stretches to the floor of
the cab for excellent visibility to the bucket. The cab roof has
channels which direct rain off the corners of the cab keeping
windows clear. An overhang on all sides of the cab protects
the operator from glare. An optional rearview camera is
available to clearly monitor movement behind the machine.
10
Steering Options
Choices of steering systems are available to provide flexibility
foryour application.
Conventional Steering
The conventional steering configuration offers a low-effort hand
metering unit hydraulic steering system. Load sensing steering
directs power through the steering system only when needed.
When not steering, more engine power is available to generate
rimpull, breakout force, lift force, and results in reduced fuel
consumption. The steering column tilts for maximum operator comfort.
11
Serviceability
Easy to Maintain. Easy to Service.
Cooling System
The cooling system is readily accessible for clean out and
maintenance. With nine cooling fins per 25.4 mm (1.0 inch)
anda perforated grill, most airborne debris entering the system
passes through the cooler cores. The hydraulic and A/C cooler
cores swing out providing easy access to both sides for cleaning.
An access panel on the left side of the cooling package swings
down to provide access to the back side of the engine coolant
and Air-to-Air After Cooler (ATAAC) and jacket water cooler core.
Engine Access
The Cat sloped one-piece tilting hood provides industryleading access to the engine, and if necessary, the entire hood
can be removed with the built-in lift points. With the hood closed,
quick checks of engine oil levels and the coolant sight gauge can
be completed through the side service doors. Panels located
behind the tires lift up and can be removed for additional access.
12
Sustainability
Conserving Resources.
The 950H and 962H are designed to compliment your business plan,
reduce emissions and minimize the consumption of natural resources.
Improved fuel efficiency less fuel consumed results inlower emissions.
Machines are built with a 96% recyclability rate (ISO16714) to conserve
valuable natural resources andfurther enhance machine end of life value.
Improved operator efficiency through enhanced visibility and reduced
noise/vibration levels.
Product Link family of products and solutions that collect,
communicate, store and deliver product and jobsite information
tomaximize productivity and reducecosts.
Major components are rebuildable, eliminating waste and saving money
by giving the machine and/or major components a second life and
even a third life.
Customer Support
Product Support
Your Cat dealer can help you maximize machine
uptime with unsurpassed worldwide parts availability,
trained technicians and customer support agreements.
Operation
To help you get the most out of your machine
investment, Cat dealers offer various training
resources to improve operating techniques.
Financing
Financing options are available to meet your needs.
13
Engine 950H
Engine Model
ISO 9249/SAE J1349 (metric)
ISO 9249/SAE J1349 (imperial)
ISO 14396/SAE J1995 (metric)
ISO 14396/SAE J1995 (imperial)
Net Power 80/1269/EEC
Peak Torque (Net) @ 1,400 rpm
Bore
Stroke
Displacement
Engine 962H
Cat C7 ACERT
147 kW
200 hp
197 hp
162 kW
220 hp
217 hp
147 kW
197 hp
907 Nm
669 ft-lb
110 mm
4.33 in
127 mm
5 in
7.2 L
439 in3
Weights 950H
Operating Weight
3
18 320 kg
40,376 lb
Buckets 950H
2.5-3.5 m3
3.6 m3
3.25-4.5 yd3
4.7 yd3
150 kN
10 811 kg
11 540 kg
33,756 lb
23,827 lb
25,434 lb
Transmission 950H
19 121 kg
42,141 lb
Bucket Capacities
Maximum Bucket Capacity
2.7-3.8 m3
3.8 m3
3.5-5.0 yd3
5.0 yd3
Breakout Force
Static Tipping Load, Full Turn (ISO)
Static Tipping Load, Full Turn
(NoTire Deflection)
141 kN
11 303 kg
12 038 kg
31,680 lb
24,913 lb
26,533 lb
Transmission 962H
6.9 km/h
12.7 km/h
22.3 km/h
37 km/h
7.6 km/h
13.9 km/h
24.5 km/h
40 km/h
14
Operating Weight
Forward 1
Forward 2
Forward 3
Forward 4
Reverse 1
Reverse 2
Reverse 3
Reverse 4
Buckets 962H
Cat C7 ACERT
156 kW
212 hp
209 hp
172 kW
234 hp
231 hp
158 kW
211 hp
907 Nm
669 ft-lb
110 mm
4.33 in
127 mm
5 in
7.2 L
439 in3
Weights 962H
Bucket Capacities
Maximum Bucket Capacity
Engine Model
ISO 9249/SAE J1349 (metric)
ISO 9249/SAE J1349 (imperial)
ISO 14396/SAE J1995 (metric)
ISO 14396/SAE J1995 (imperial)
Net Power 80/1269/EEC
Peak Torque (Net) @ 1,400 rpm
Bore
Stroke
Displacement
4.3 mph
7.9 mph
13.9 mph
23.0 mph
4.7 mph
8.6 mph
15.2 mph
24.9 mph
Forward 1
Forward 2
Forward 3
Forward 4
Reverse 1
Reverse 2
Reverse 3
Reverse 4
7 km/h
13 km/h
22.6 km/h
38 km/h
7.6 km/h
13.9 km/h
24.5 km/h
40 km/h
4.4 mph
8.1 mph
14.0 mph
23.6 mph
4.7 mph
8.6 mph
15.2 mph
24.9 mph
Hydraulic System
Sound
270 L/min
71 gal/min
Piston
6.2 Seconds
2.0 Seconds
2.5 Seconds
2.5 Seconds
2.7 Seconds
Brakes
Brakes
Axles
Front
Fixed front
Rear
Oscillating 13
Maximum Single-Wheel Rise and Fall 470 mm
18.5 in
Tires
Tires
Choice of:
23.5R25 VSW BS L2 Radial
23.5R25 VUT D2A BS L2 Radial
23.5R25 XTLA MX L2 Radial
23.5R25 VMT BS L3 Radial
23.5R25 XHA MX L3 Radial
23.5R25 XMINE MX L5 Radial
750/65R25 XLD MX L3 Radial
23.5-25 SGGL FS L2 Bias
Flexport
NOTE: In certain applications (such as load and carry) the loaders
productive capabilities might exceed the tires tonnes-km/h
(ton-mph) capabilities. Caterpillar recommends that you consult a
tire supplier to evaluate all conditions before selecting a tire model.
The 23.5-25 size range and other special tires are available on request.
264 L
42 L
30 L
34 L
36 L
36 L
110 L
70 gal
11 gal
7.9 gal
9 gal
9.5 gal
9.5 gal
29 gal
Cab
ROPS/FOPS
15
950H Dimensions
All dimensions are approximate and based on L3 Michelin XHA2 tires.
10
15
11
1
5
2
3
13
14
12
3461 mm
11'4"
3278 mm
10'8"
2448 mm
8'0"
397 mm
1'3"
3992 mm
4490 mm
2001 mm
13'1"
14'7"
6.6"
3350 mm
11'0"
624 mm
2'0"
748 mm
2'5"
1675 mm
5'5"
59.5 degrees
48.2 degrees
49.4 degrees
41 degrees
748 mm
2'5"
3916 mm
12'8"
4414 mm
14'5"
Change in
operatingweight
Change in static
tippingload
Tires
Tread width for 23.5-25 is 2140 mm (7'0")
Width over tires
mm
2862
2866
2801
2851
2784
2807
2879
2834
inches
113
113
110
112
110
111
113
112
Change in vertical
dimensions
mm
6
10
7
3
0
26
7
14
inches
0.2
0.4
0.3
0.1
0.0
1.0
0.3
0.6
kg
20
41
112
124
0
872
460
472
lb
44
90
247
273
0
1,923
1,014
1,041
kg
14
29
79
88
0
619
326
335
lb
31
64
174
194
0
1,365
719
739
962H Dimensions
10
15
11
1
5
2
3
13
14
12
9
7
3461 mm
11'4"
3278 mm
10'8"
2448 mm
8'0"
397 mm
1'3"
4182 mm
4490 mm
2001 mm
13'7"
14'7"
6.6"
3350 mm
11'0"
664 mm
2'2"
748 mm
2'5"
1675 mm
5'5"
59.5 degrees
48.2 degrees
48.5 degrees
40 degrees
748 mm
2'5"
4002 mm
13'1"
4414 mm
14'5"
Change in
operatingweight
Change in static
tippingload
Tires
Tread width for 23.5-25 is 2140 mm (7'0")
Width over tires
mm
2862
2866
2801
2851
2784
2807
2879
2834
inches
113
113
110
112
110
111
113
112
Change in vertical
dimensions
mm
6
10
7
3
0
26
7
14
inches
0.2
0.4
0.3
0.1
0.0
1.0
0.3
0.6
kg
20
41
112
124
0
872
460
472
lb
44
90
247
273
0
1,923
1,014
1,041
kg
14
29
79
88
0
619
326
335
lb
31
64
174
194
0
1,365
719
739
17
Bucket Type
Edge Type
Capacity Rated ()
Capacity Rated @ 110% Fill Factor
Width ()
Dump Clearance at Maximum Lift and 45 Discharge ()
Reach at Maximum Lift and 45 Discharge ()
Reach at Level Lift Arm and Bucket Level ()
Digging Depth ()
Overall Length
Overall Height with Bucket at Maximum Lift
Loader Clearance Circle with Bucket at Carry Position ()
Static Tipping Load, Straight (ISO)*
Static Tipping Load, Straight (No Tire Deflection)*
Static Tipping Load, Articulated (ISO)*
Static Tipping Load, Articulated (No Tire Deflection)*
Breakout Force** ()
Operating Weight*
m3
yd3
m3
yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kN
lb
kg
lb
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
2.70
3.53
3.00
3.90
2927
9'7"
2936
9'7"
1263
4'1"
2527
8'3"
89
3.5"
7961
26'2"
5363
17'8"
13 301
43'8"
12 701
27,993
13 424
29,586
10 986
24,214
11 711
25,812
163
36,840
18 231
40,180
2.70
3.53
3.00
3.90
2994
9'9"
2821
9'3"
1377
4'6"
2688
8'9"
89
3.5"
8135
26'9"
5363
17'8"
13 464
44'3"
12 562
27,688
13 284
29,279
10 848
23,909
11 571
25,504
162
36,573
18 339
40,418
3.10
4.05
3.40
4.50
2927
9'7"
2856
9'4"
1319
4'3"
2627
8'7"
89
3.5"
8061
26'6"
5325
17'6"
13 356
43'10"
12 515
27,584
13 242
29,186
10 811
23,827
11 540
25,434
150
33,756
18 320
40,376
3.10
4.05
3.40
4.50
2994
9'9"
2738
8'11"
1430
4'8"
2788
9'1"
89
3.5"
8235
27'1"
5325
17'6"
13 519
44'5"
12 375
27,275
13 101
28,875
10 671
23,519
11 398
25,122
149
33,491
18 428
40,614
3.40
4.45
3.70
4.90
2927
9'7"
2791
9'1"
1371
4'5"
2712
8'10"
89
3.5"
8146
26'9"
5529
18'2"
13 403
44'0"
12 355
27,230
13 085
28,841
10 659
23,494
11 392
25,108
140
31,477
18 395
40,541
3.40
4.45
3.70
4.90
2994
9'9"
2672
8'9"
1481
4'10"
2873
9'5"
89
3.5"
8320
27'4"
5529
18'2"
13 567
44'7"
12 214
26,919
12 943
28,526
10 518
23,182
11 249
24,793
138
31,214
18 503
40,779
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, product link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
() Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(No Tire Deflection) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
18
Bucket Type
Edge Type
Capacity Rated ()
Capacity Rated @ 110% Fill Factor
Width ()
Dump Clearance at Maximum Lift and 45 Discharge ()
Reach at Maximum Lift and 45 Discharge ()
Reach at Level Lift Arm and Bucket Level ()
Digging Depth ()
Overall Length
Overall Height with Bucket at Maximum Lift
Loader Clearance Circle with Bucket at Carry Position ()
Static Tipping Load, Straight (ISO)*
Static Tipping Load, Straight (No Tire Deflection)*
Static Tipping Load, Articulated (ISO)*
Static Tipping Load, Articulated (No Tire Deflection)*
Breakout Force** ()
Operating Weight*
m3
yd3
m3
yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kN
lb
kg
lb
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
3.20
4.19
3.50
4.60
2927
9'7"
2756
9'0"
1255
4'1"
2672
8'9"
97
3.8"
8112
26'8"
5490
18'1"
13 387
44'0"
12 307
27,125
13 020
28,696
10 624
23,417
11 340
24,993
144
32,489
18 352
40,446
3.20
4.19
3.50
4.60
2994
9'9"
2631
8'7"
1358
4'5"
2833
9'3"
97
3.8"
8286
27'3"
5490
18'1"
13 551
44'6"
12 168
26,818
12 879
28,386
10 485
23,109
11 199
24,683
143
32,223
18 460
40,684
3.40
4.45
3.70
4.90
2927
9'7"
2721
8'11"
1291
4'2"
2722
8'11"
97
3.8"
8162
26'10"
5539
18'3"
13 415
44'1"
12 214
26,921
12 929
28,497
10 536
23,223
11 254
24,804
138
31,199
18 400
40,552
3.40
4.45
3.70
4.90
2994
9'9"
2596
8'6"
1393
4'6"
2883
9'5"
97
3.8"
8336
27'5"
5539
18'3"
13 580
44'7"
12 074
26,612
12 787
28,184
10 396
22,914
11 112
24,492
137
30,934
18 508
40,790
3.60
4.71
4.00
5.20
2927
9'7"
2686
8'9"
1326
4'4"
2772
9'1"
97
3.8"
8212
27'0"
5589
18'5"
13 443
44'2"
12 127
26,729
12 845
28,311
10 454
23,040
11 174
24,628
133
29,997
18 446
40,653
3.60
4.71
4.00
5.20
2994
9'9"
2560
8'4"
1428
4'8"
2933
9'7"
97
3.8"
8386
27'7"
5589
18'5"
13 608
44'8"
11 986
26,418
12 702
27,997
10 312
22,729
11 031
24,313
132
29,733
18 554
40,892
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, product link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
() Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(No Tire Deflection) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
19
High Lift
Change in
Specs
Capacity Rated ()
Capacity Rated @ 110% Fill Factor
Width ()
Dump Clearance at Maximum Lift and 45 Discharge ()
Reach at Maximum Lift and 45 Discharge ()
Reach at Level Lift Arm and Bucket Level ()
Digging Depth ()
Overall Length
Overall Height with Bucket at Maximum Lift
Loader Clearance Circle with Bucket at Carry Position ()
Static Tipping Load, Straight (ISO)*
Static Tipping Load, Straight (No Tire Deflection)*
Static Tipping Load, Articulated (ISO)*
Static Tipping Load, Articulated (No Tire Deflection)*
Breakout Force** ()
Operating Weight*
m3
yd3
m3
yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kN
lb
kg
lb
495
1'7"
67
0'2"
405
1'3"
21
0.8"
605
2'0"
496
1'8"
391
1'4"
(341)
(751)
(398)
(878)
(416)
(917)
(458)
(1,011)
(8)
(1,892)
1271
2,800
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, product link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
() Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(No Tire Deflection) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
20
Material Density
kg/m3
700
800
900
1000
1100
1200
1300
1400
1500
1600
1900
2000
2100
2200
2300
2400
2500
4,044
4,213
Pin On
1800
Pin On
Standard Linkage
General
Purpose
1700
lb/yd3
1,348
1,517
1,685
1,854
2,022
2,359
2,528
2,696
2,865
3,033
3,202
3,370
3,539
3,707
3,876
25-76 mm (1 to 3 in)
19 mm (0.75 in) and smaller
Rock
115
115
110
105
100
Note: Fill Factors achieved will also depend on whether the product is washed or not washed.
21
Bucket Type
Edge Type
Capacity Rated ()
Capacity Rated @ 110% Fill Factor
Width ()
Dump Clearance at Maximum Lift and 45 Discharge ()
Reach at Maximum Lift and 45 Discharge ()
Reach at Level Lift Arm and Bucket Level ()
Digging Depth ()
Overall Length
Overall Height with Bucket at Maximum Lift
Loader Clearance Circle with Bucket at Carry Position ()
Static Tipping Load, Straight (ISO)*
Static Tipping Load, Straight (No Tire Deflection)*
Static Tipping Load, Articulated (ISO)*
Static Tipping Load, Articulated (No Tire Deflection)*
Breakout Force** ()
Operating Weight*
m3
yd3
m3
yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kN
lb
kg
lb
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
3.10
4.05
3.40
4.50
2927
9'7"
3046
9'11"
1269
4'1"
2727
8'11"
90
3.5"
8291
27'3"
5515
18'2"
13 478
44'3"
13 346
29,416
14 065
30,999
11 459
25,255
12 190
26,867
151
33,973
19 046
41,976
3.10
4.05
3.40
4.50
2994
9'9"
2928
9'7"
1380
4'6"
2888
9'5"
90
3.5"
8464
27'10"
5515
18'2"
13 645
44'10"
13 208
29,110
13 925
30,691
11 320
24,950
12 050
26,559
150
33,715
19 154
42,214
3.40
4.45
3.70
4.90
2927
9'7"
2981
9'9"
1321
4'4"
2812
9'2"
90
3.5"
8376
27'6"
5719
18'10"
13 527
44'5"
13 181
29,052
13 903
30,643
11 303
24,913
12 038
26,533
141
31,680
19 121
42,141
3.40
4.45
3.70
4.90
2994
9'9"
2862
9'4"
1431
4'8"
2973
9'9"
90
3.5"
8549
28'1"
5719
18'10"
13 696
45'0"
13 041
28,744
13 762
30,332
11 163
24,605
11 897
26,221
139
31,423
19 229
42,379
3.60
4.71
4.00
5.20
2927
9'7"
2935
9'7"
1357
4'5"
2872
9'5"
90
3.5"
8436
27'9"
5777
19'0"
13 562
44'6"
13 060
28,784
13 784
30,380
11 189
24,661
11 926
26,285
134
30,214
19 179
42,269
3.60
4.71
4.00
5.20
2994
9'9"
2816
9'2"
1467
4'9"
3033
9'11"
90
3.5"
8609
28'3"
5777
19'0"
13 732
45'1"
12 919
28,474
13 642
30,067
11 048
24,351
11 784
25,972
133
29,958
19 287
42,507
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, product link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
() Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(No Tire Deflection) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
22
Bucket Type
Edge Type
Capacity Rated ()
Capacity Rated @ 110% Fill Factor
Width ()
Dump Clearance at Maximum Lift and 45 Discharge ()
Reach at Maximum Lift and 45 Discharge ()
Reach at Level Lift Arm and Bucket Level ()
Digging Depth ()
Overall Length
Overall Height with Bucket at Maximum Lift
Loader Clearance Circle with Bucket at Carry Position ()
Static Tipping Load, Straight (ISO)*
Static Tipping Load, Straight (No Tire Deflection)*
Static Tipping Load, Articulated (ISO)*
Static Tipping Load, Articulated (No Tire Deflection)*
Breakout Force** ()
Operating Weight*
m3
yd3
m3
yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kN
lb
kg
lb
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
3.40
4.45
3.70
4.90
2927
9'7"
2911
9'6"
1241
4'0"
2822
9'3"
98
3.8"
8392
27'7"
5729
18'10"
13 540
44'6"
13 039
28,738
13 746
30,296
11 180
24,640
11 900
26,228
139
31,403
19 126
42,152
3.40
4.45
3.70
4.90
2994
9'9"
2786
9'1"
1343
4'4"
2983
9'9"
98
3.8"
8565
28'2"
5729
18'10"
13 709
45'0"
12 900
28,431
13 605
29,987
11 040
24,334
11 760
25,919
138
31,144
19 234
42,390
3.60
4.71
4.00
5.20
2927
9'7"
2876
9'5"
1276
4'2"
2872
9'5"
98
3.8"
8442
27'9"
5779
19'0"
13 569
44'7"
12 949
28,540
13 659
30,105
11 094
24,453
11 818
26,047
134
30,195
19 172
42,254
3.60
4.71
4.00
5.20
2994
9'9"
2750
9'0"
1378
4'6"
3033
9'11"
98
3.8"
8615
28'4"
5779
19'0"
13 739
45'1"
12 809
28,232
13 518
29,794
10 955
24,144
11 677
25,736
133
29,936
19 280
42,492
3.80
4.97
4.20
5.50
2927
9'7"
2833
9'3"
1319
4'3"
2933
9'7"
98
3.8"
8503
27'11"
5828
19'2"
13 605
44'8"
12 835
28,288
13 547
29,859
10 987
24,215
11 712
25,815
128
28,825
19 228
42,377
3.80
4.97
4.20
5.50
2994
9'9"
2707
8'10"
1421
4'7"
3094
10'1"
98
3.8"
8676
28'6"
5828
19'2"
13 776
45'3"
12 694
27,978
13 405
29,546
10 846
23,905
11 570
25,502
127
28,568
19 336
42,615
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, product link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
() Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(No Tire Deflection) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
23
High Lift
Change in
Specs
Capacity Rated ()
Capacity Rated @ 110% Fill Factor
Width ()
Dump Clearance at Maximum Lift and 45 Discharge ()
Reach at Maximum Lift and 45 Discharge ()
Reach at Level Lift Arm and Bucket Level ()
Digging Depth ()
Overall Length
Overall Height with Bucket at Maximum Lift
Loader Clearance Circle with Bucket at Carry Position ()
Static Tipping Load, Straight (ISO)*
Static Tipping Load, Straight (No Tire Deflection)*
Static Tipping Load, Articulated (ISO)*
Static Tipping Load, Articulated (No Tire Deflection)*
Breakout Force** ()
Operating Weight*
m3
yd3
m3
yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kN
lb
kg
lb
305
1'0"
117
0'4"
305
1'0"
(35)
1.3"
375
1'3"
306
1'1"
(5)
0'1"
(1172)
(2,583)
(1221)
(2,691)
(1064)
(2,345)
(1109)
(2,444)
(9)
(2,109)
545
1,200
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, product link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
() Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(No Tire Deflection) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
24
Material Density
kg/m3
700
800
900
1000
1100
1200
1300
1400
1800
1900
2000
2100
2200
2300
2400
2500
3,707
3,876
4,044
4,213
Pin On
Standard Linkage
1700
Pin On
1600
1500
lb/yd3
1,348
1,517
1,685
1,854
2,022
2,359
2,528
2,696
2,865
3,033
3,202
3,370
3,539
25-76 mm (1 to 3 in)
19 mm (0.75 in) and smaller
Rock
115
115
110
105
100
Note: Fill Factors achieved will also depend on whether the product is washed or not washed.
25
Standard Equipment
Standard equipment may vary. Consult your Cat dealer for details.
ELECTRICAL
Alarm, back-up
Alternator, 115-amp brushed
Batteries, maintenance free (2) 1,400 CCA
Ignition key; start/stop switch
Lighting system, halogen (6 total)
Main disconnect switch
Starter, electric, heavy-duty
Starting and charging system (24-volt)
Receptacle, starting, 24-volt
OPERATOR ENVIRONMENT
Air conditioner
Bucket/work tool function lockout
Cab, pressurized and sound-suppressed
ROPS/FOPS
Radio-ready (entertainment) includes
antenna, speakers and converter
(12-volt, 10-amp)
Coat hook
Computerized monitoring system
Instrumentation, gauges:
Digital gear range indicator
Engine coolant temperature
Fuel level
Hydraulic oil temperature
Speedometer/tachometer
Transmission oil temperature
Instrumentation, warning indicators:
Air inlet heater
Axle oil temperature
Electrical, alternator output
Engine inlet manifold temperature
Engine oil pressure
Fuel level
Fuel pressure, hi/low
Parking brake
Primary steering oil pressure
Service brake oil pressure
Transmission filter bypass
26
Controls, electro-hydraulic,
liftandtiltfunction
Heater and defroster
Horn, electric (console)
Light, dome (cab)
Lunch box, beverage holders and
personaltray
Mirror, rearview (internally mounted)
Mirrors, external
Seat, Cat Comfort (cloth) with air suspension
Seat belt, retractable, 51 mm (2 in) wide
Steering column, adjustable angle
(steeringwheel command control steering)
and length (command control steering)
Wet-arm wipers and washers, front and rear
Intermittent front wiper
Window, sliding (left and right side)
POWER TRAIN
Brakes, full hydraulic enclosed wet-disc
with Integrated Braking System (IBS)
andbrake wearindicator
Engine, Cat C7 with ACERT Technology
and ATAAC
Fan, radiator, electronically controlled,
hydraulically driven, temperature sensing,
on demand
Filters, fuel, primary/secondary
Filters, engine air, primary/secondary
Fuel priming pump (electric)
Fuel/water separator
Muffler, sound suppressed
Radiator, unit core
Starting aid, air inlet heater
Switch, transmission neutralizer lockout
Torque converter
Transmission, automatic, planetary
powershift (4F/4R)
OTHER
Automatic bucket positioner
Counterweight
Couplings, Cat O-ring face seal
Doors, service access (locking)
Ecology drains, engine, transmission
andhydraulics
Fenders, steel (front and rear)
Guard, airborne debris
Hitch, drawbar with pin
Hood, non-metallic, power tilting
Hoses, Cat XT
Hydraulic oil cooler
Kickout, lift and tilt, automatic
(in-cab adjustable)
Linkage, Z-bar, cast cross tube/tilt lever
Oil sampling valves
Product Link ready
Remote diagnostic pressure taps
Remote FNR
Service center, electrical and hydraulic
Sight gauges:
Engine coolant
Hydraulic oil
Transmission oil level
Sun visor, front
Steering, load sensing
TIRES, RIMS, WHEELS
A tire must be selected from the mandatory
attachments section. Base machine price
includes an allowance based on a premium
radial tire.
ANTIFREEZE
Premixed 50% concentration of
ExtendedLife Coolant with freeze
protection to 34 C (29 F)
Optional Equipment
Optional equipment may vary. Consult your Cat dealer for details.
Radio, CB-ready
Rear ladder, right
Remote pressure taps, transmission
Ride Control System, two- or three-valve
Seat belt, 76 mm (3 in) wide
Sound suppression, exterior
Starting aid, ether
Steering, Command Control System
Steering, secondary
Special Machine Arrangements
High Lift Arrangement, two- and
three-valve (950H/962H)
(950H/962H)
Tool box
Variable Pitch Fan (VPF)
27
AEHQ6844 (03-2013)