Академический Документы
Профессиональный Документы
Культура Документы
General Information
DESCRIPTION
SSPC-SP 1
Solvent Cleaning A method for removing all visible oil, grease, soil, drawing
and cutting compounds, and other soluble contaminants from steel surfaces. It is
intended that solvent cleaning be used prior to the application of paint and in
conjunction with surface preparation methods specified for the removal of rust,
mill scale, or paint.
SSPC-SP 2 (St 2)
Hand Tool Cleaning A method of preparing steel surfaces by the use of nonpower hand tools. Hand tool cleaning removes all loose mill scale, loose rust,
loose paint, and other loose detrimental foreign matter. It is not intended that
this process remove adherent mill scale, rust, and paint. Mill scale, rust, and
paint are considered adherent if they cannot be removed by lifting with a dull
putty knife.
SSPC-SP 3 (St 3)
White Metal Blast Cleaning A white metal blast cleaned surface, when
viewed without magnification, shall be free of all visible oil, grease, dust, dirt,
mill scale, rust, coating, oxides, corrosion products, and other foreign matter.
-1-
SSPCSP11
Power Tool Cleaning to Bare Metal - Metallic surfaces which are prepared
according to this specification, when viewed without magnification, shall be free
of all visible oil, grease, dirt, dust, mill scale, rust, paint, oxide, corrosion
products, and other foreign matter. Slight residues of rust and paint may be left
in the lower portion of pits if the original surface is pitted. When painting is
specified, the surface shall be roughened to a degree suitable for the specified
paint system. The surface profile shall not be less than 1 mil (25 micrometers.)
SSPCSP12/NACENo.5
WJ-3
WJ-4
Surface shall have all loose rust, loose mill scale, and loose coatings
uniformly removed.
SSPC14/NACENo.8
POWERWRAP LP
www.powerwraplp.com
Surface shall have less than 7g/cm2 chloride contaminants, less than
10g/cm2 of soluble ferrous ion levels, and less than 17g/cm2 of
sulfate contaminants as verified by field or laboratory analysis using
reliable, reproducible test equipment.
SC-3
2011 PowerWrap LP