Академический Документы
Профессиональный Документы
Культура Документы
16 11:17:40 =~=~=~=~=~=~=~=~=~=~=~=
eshxitrun
bdgrouter2800#
*Mar 16 05:12:44.699: %SYS-5-CONFIG_I: Configured from console by consolesh run
Building configuration...
Current configuration : 4282 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname bdgrouter2800
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
enable password testbed
!
no aaa new-model
no network-clock-participate wic 0
!
!
ip cef
!
!
ip--More-domain name yourdomain.com
clns routing
!
voice-card 0
no dspfarm
!
!
!
!
!
!
!
!
!
!
!
!
!
crypto pki trustpoint TP-self-signed-2820424666
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2820424666
revocation-check none
rsakeypair TP-self-signed-2820424666
!--More-!
crypto pki certificate chain TP-self-signed-2820424666
certificate self-signed 01
30820254 308201BD A0030201 02020101 300D0609 2A864886
31312F30 2D060355 04031326 494F532D 53656C66 2D536967
69666963 6174652D 32383230 34323436 3636301E 170D3039
34345A17 0D323030 31303130 30303030 305A3031 312F302D
4F532D53 656C662D 5369676E 65642D43 65727469 66696361
F70D0101
6E65642D
31313138
06035504
74652D32
04050030
43657274
30383334
03132649
38323034
ip--More-http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
clns host sgclns 39.702f.0000.0116.0000.0001.0001.0100.6002.0002.00
!
!
control-plane
!
!
!
!
mgcp behavior g729-variants static-pt
!
!
!
!
banner login ^C
----------------------------------------------------------------------Cisco Router and Security Device Manager (SDM) is installed on this device.
This feature requires the one-time use of the username "cisco"
with the password "cisco". The default username and password have a privilege le
vel of 15.
--More-Please change these publicly known initial credentials using SDM or the IOS CLI.
Here are the Cisco IOS commands.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want to use
.
For more information about SDM please follow the instructions in the QUICK START
GUIDE for your router or go to http://www.cisco.com/go/sdm
----------------------------------------------------------------------^C
!
line con 0
password testbed
login
line aux 0
line vty 0 4
privilege level 15
password testbed
--More-login
transport input telnet ssh
line vty 5 15
access-class 23 in
privilege level 15
login local
transport input telnet ssh
!
scheduler allocate 20000 1000
!
end
exit t
bdgrouter2800#conf
----------------------------------------------------------------------Cisco Router and Security Device Manager (SDM) is installed on this device.
This feature requires the one-time use of the username "cisco"
with the password "cisco". The default username and password have a privilege le
vel of 15.
Please change these publicly known initial credentials using SDM or the IOS CLI.
Here are the Cisco IOS commands.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want to use
.
For more information about SDM please follow the instructions in the QUICK START
GUIDE for your router or go to http://www.cisco.com/go/sdm
----------------------------------------------------------------------User Access Verification
Password: