Вы находитесь на странице: 1из 80

Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology

Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab

4) Change the color setting to 16 bit or 24 bit (recommended)


5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)

How do I change my monitor setting to 16 bit or 24 bit


------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program

---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial


Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.

Home page : http://www.DentalMedSoft.com


Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"

If you have problems modifying you monitor setting please refer


to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit

------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


----------------------

1) Insert the Interactive Atlas of Oral & Maxillofacial


Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com

Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer

to your operating system manual or help file for addition information,


or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
-------------------------------------------------------

1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM

2) Open the Start Menu and select "Run"


3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.

Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology


Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu

2)
3)
4)
5)

Double click on the "Display Icon"


Select the "Setting" Tab
Change the color setting to 16 bit or 24 bit (recommended)
Click "ok"

If you have problems modifying you monitor setting please refer


to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key

(where X: is the letter of your CD-ROM drive)


How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.

Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology


Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab

4) Change the color setting to 16 bit or 24 bit (recommended)


5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)

How do I change my monitor setting to 16 bit or 24 bit


------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program

---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial


Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.

Home page : http://www.DentalMedSoft.com


Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"

If you have problems modifying you monitor setting please refer


to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit

------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


----------------------

1) Insert the Interactive Atlas of Oral & Maxillofacial


Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com

Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer

to your operating system manual or help file for addition information,


or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
-------------------------------------------------------

1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM

2) Open the Start Menu and select "Run"


3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.

Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology


Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu

2)
3)
4)
5)

Double click on the "Display Icon"


Select the "Setting" Tab
Change the color setting to 16 bit or 24 bit (recommended)
Click "ok"

If you have problems modifying you monitor setting please refer


to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key

(where X: is the letter of your CD-ROM drive)


How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.

Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology


Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab

4) Change the color setting to 16 bit or 24 bit (recommended)


5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)

How do I change my monitor setting to 16 bit or 24 bit


------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program

---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial


Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"

3) Type x:\IAOMP.exe followed by the enter key


(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit

------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"

3) Select the "Setting" Tab


4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer

to your operating system manual or help file for addition information,


or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology

Copyright 1998

DentalMedSoft, Inc.

Home page : http://www.DentalMedSoft.com


Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


----------------------

1) Insert the Interactive Atlas of Oral & Maxillofacial


Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by

If you have problems modifying you monitor setting please refer


to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.

Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology


Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com

Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program

---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial


Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"

3) Type x:\IAOMP.exe followed by the enter key


(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit

------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"

3) Select the "Setting" Tab


4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer

to your operating system manual or help file for addition information,


or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology

Copyright 1998

DentalMedSoft, Inc.

Home page : http://www.DentalMedSoft.com


Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


----------------------

1) Insert the Interactive Atlas of Oral & Maxillofacial


Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by

If you have problems modifying you monitor setting please refer


to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.

Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology


Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com

Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program

---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial


Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"

3) Type x:\IAOMP.exe followed by the enter key


(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit

------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"

3) Select the "Setting" Tab


4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer

to your operating system manual or help file for addition information,


or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology

Copyright 1998

DentalMedSoft, Inc.

Home page : http://www.DentalMedSoft.com


Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


----------------------

1) Insert the Interactive Atlas of Oral & Maxillofacial


Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by

If you have problems modifying you monitor setting please refer


to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.

Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology


Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com

Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program

---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial


Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"

3) Type x:\IAOMP.exe followed by the enter key


(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit

------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"

3) Select the "Setting" Tab


4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer

to your operating system manual or help file for addition information,


or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology

Copyright 1998

DentalMedSoft, Inc.

Home page : http://www.DentalMedSoft.com


Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


----------------------

1) Insert the Interactive Atlas of Oral & Maxillofacial


Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by

If you have problems modifying you monitor setting please refer


to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
------------------------------------------------------1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.
Interactive AtInteractive Atlas of Oral & Maxillofacial Pathology
Copyright 1998
DentalMedSoft, Inc.
Home page : http://www.DentalMedSoft.com
Customer-Service : Customer-Service@DentalMedSoft.com
Technical-Support : Technical-Support@DentalMedSoft.com

How to run the program


---------------------1) Insert the Interactive Atlas of Oral & Maxillofacial
Pathology in the CD-ROM
2) Open the Start Menu and select "Run"
3) Type x:\IAOMP.exe followed by the enter key
(where X: is the letter of your CD-ROM drive)
How do I change my monitor setting to 16 bit or 24 bit
-------------------------------------------------------

1) Open the Start Menu and select "Control Panel" from the
"Settings" menu
2) Double click on the "Display Icon"
3) Select the "Setting" Tab
4) Change the color setting to 16 bit or 24 bit (recommended)
5) Click "ok"
If you have problems modifying you monitor setting please refer
to your operating system manual or help file for addition information,
or contact your technical support department.

Вам также может понравиться